Electrical and Computer Engineering Commons^™

Super-Resolution For Imagery From Integrated Microgrid Polarimeters, Russell C. Hardie, Daniel A. Lemaster, Bradley M. Ratliff

Electrical and Computer Engineering Faculty Publications

Imagery from microgrid polarimeters is obtained by using a mosaic of pixel-wise micropolarizers on a focal plane array (FPA). Each distinct polarization image is obtained by subsampling the full FPA image. Thus, the effective pixel pitch for each polarization channel is increased and the sampling frequency is decreased. As a result, aliasing artifacts from such undersampling can corrupt the true polarization content of the scene. Here we present the first multi-channel multi-frame super-resolution (SR) algorithms designed specifically for the problem of image restoration in microgrid polarization imagers. These SR algorithms can be used to address aliasing and other degradations, without …

Comparison Of A High Purity Germanium Gamma Ray Spectrometer And A Multidimensional Nai(T1) Scintillation Gamma Ray Spectrometer, Greg Stratton

Aerospace Engineering

This report compares two different gamma ray spectrometers in terms of performance, operation, and apparatus and also investigates the design and integration challenges of using gamma ray spectrometers in space. The first spectrometer is a one-dimensional high purity germanium (HPGe) spectrometer and the second is a multidimensional NaI(Tl) scintillation spectrometer (MGRS). The key results show that the HPGe exhibits 15 to 27 times better energy resolution than the MGRS, but the MGRS is 52 times more sensitive and removes 177 % more of the background radiation.

Upmixing From Mono : A Source Separation Approach, Derry Fitzgerald

Conference papers

We present a system for upmixing mono recordings to stereo through the use of sound source separation techniques. The use of sound source separation has the advantage of allowing sources to be placed at distinct points in the stereo field, resulting in more natural sounding upmixes. The system separates an input signal into a number of sources, which can then be imported into a digital audio workstation for upmixing to stereo. Considerations to be taken into account when upmixing are discussed, and a brief overview of the various sound source separation techniques used in the system are given. The effectiveness …

Novel Microelectromechanical Systems Image Reversal Fabrication Process Based On Robust Su-8 Masking Layers, Scott A. Ostrow Ii, Ronald A. Coutu Jr.

Electrical and Computer Engineering Faculty Research and Publications

This paper discusses a novel fabrication process that uses a combination of negative and positive photoresists with positive tone photomasks, resulting in masking layers suitable for bulk micromachining high-aspect ratio microelectromechanical systems (MEMS) devices. MicroChem's negative photoresist Nano™ SU-8 and Clariant's image reversal photoresist AZ 5214E are utilized, along with a barrier layer, to effectively convert a positive photomask into a negative image. This technique utilizes standard photolithography chemicals, equipment, and processes, and opens the door for creating complementary MEMS structures without added fabrication delay and cost. Furthermore, the SU-8 masking layer is robust enough to withstand aggressive etch chemistries …

Ultrafast Electron Diffraction Study Of The Dynamics Of Antimony Thin Films And Nanoparticles, Mahmoud Abdel-Fattah

Electrical & Computer Engineering Theses & Dissertations

The ultrafast fast phenomena that take place following the application of a 120 fs laser pulse on 20 nm antimony thin films and 40 nm nanoparticles were studied using time-resolved electron diffraction. Samples are prepared by thermal evaporation, at small thickness (< 10 nm) antimony nanoparticles form while at larger thicknesses we get continuous thin films.

The samples are annealed and studied by static heating to determine their Debye temperatures, which were considerably less than the standard value. The thermal expansion under static heating also yielded the expansion coefficient of the sample material. Nanoparticle samples gave a very accurate thermal expansion coefficient (11 × 10^-6 K^-1).

Ultrafast time resolved electron diffraction …

Statistical Optimizations Of Muscle Action Potentials Based On Modeling And Analysis Of Ion Channel Dynamics, Gyutae Kim

Electrical & Computer Engineering Theses & Dissertations

An Electromyogram (EMG) is an electrical signal, which is measured from a skeletal muscle during voluntary and involuntary contractions. EMGs are useful in interpreting pathological states of the musculoskeletal system. In particular, EMGs offer valuable information concerning the timing of muscular activity and its relative intensity. Various EMG models have developed with many different purposes from a pure mathematical model to a pattern structure model [17,46]. Sophisticated EMG models are necessary to examine the effects of small changes in muscular morphology and activities [46]. Due to the crucial importance of EMG models, all factors in the model should be precise …

Improving The Efficiency Of Organic Solar Cells By Varying The Material Concentration In The Photoactive Layer, Kevin Anthony Latimer

Electrical & Computer Engineering Theses & Dissertations

Polymer-fullerene bulk heterojunction solar cells have been a rapidly improving technology over the past decade. To further improve the relatively low energy conversion efficiencies of these solar cells, several modifications need to be made to the overall device structure. Emerging technologies include cells that are fabricated with interfacial layers to facilitate charge transport, and tandem structures are being introduced to harness the absorption spectrum of polymers with varying bandgap energies.

When new structures are implemented, each layer of the cell must be optimized in order for the entire device to function efficiently. The most volatile layer of these devices is …

Improving The Efficiency Of Organic Solar Cells By Varying The Material Concentration In The Photoactive Layer, Kevin Anthony Latimer

Electrical & Computer Engineering Theses & Dissertations

Polymer-fullerene bulk heterojunction solar cells have been a rapidly improving technology over the past decade. To further improve the relatively low energy conversion efficiencies of these solar cells, several modifications need to be made to the overall device structure. Emerging technologies include cells that are fabricated with interfacial layers to facilitate charge transport, and tandem structures are being introduced to harness the absorption spectrum of polymers with varying bandgap energies.

When new structures are implemented, each layer of the cell must be optimized in order for the entire device to function efficiently. The most volatile layer of these devices is …

Cyberknife Radiation Modeling: Effects Of Relaxed Translational And Rotational Constraints On Healthy Tissue Irradiation, Sudha Bhavaroop Potineni

Electrical & Computer Engineering Theses & Dissertations

The Cyberknife system is a robotic radio surgery instrument that is used to treat cancers in different parts of the human body. Because of its accuracy and precision, it has become one of the best radio surgery systems in the world. However, even with Cyberknife the treatment time for one session takes from 30 minutes up to 120 minutes depending on the size, shape, and position of the tumor in the human body. In this research, a solution is presented to aid in reducing this long treatment time. An algorithm is developed which simulates the amount of the healthy tissue …

The Tracking Performance Of Distributed Recoverable Flight Control Systems Subject To High Intensity Radiated Fields, Rui Wang

Electrical & Computer Engineering Theses & Dissertations

It is known that high intensity radiated fields (HIRF) can produce upsets in digital electronics, and thereby degrade the performance of digital flight control systems. Such upsets, either from natural or man-made sources, can change data values on digital buses and memory and affect CPU instruction execution. HIRF environments are also known to trigger common-mode faults, affecting nearly-simultaneously multiple fault containment regions, and hence reducing the benefits of n-modular redundancy and other fault-tolerant computing techniques. Thus, it is important to develop models which describe the integration of the embedded digital system, where the control law is implemented, as well …

Simplified Design Of Thin-Film Polarizing Beam Splitter Using Embedded Symmetric Trilayer Stack, R. M.A. Azzam

Electrical Engineering Faculty Publications

An analytically tractable design procedure is presented for a polarizing beam splitter (PBS) that uses frustrated total internal reflection and optical tunneling by a symmetric LHL trilayer thin-film stack embedded in a high-index prism. Considerable simplification arises when the refractive index of the high-index center layer H matches the refractive index of the prism and its thickness is quarter-wave. This leads to a cube design in which zero reflection for the p polarization is achieved at a 45 degrees angle of incidence independent of the thicknesses of the identical symmetric low-index tunnel layers L and L. Arbitrarily high reflectance for …

A Probabilistic Analysis Of A Simplified Biogeography-Based Optimization Algorithm, Daniel J. Simon

Electrical and Computer Engineering Faculty Publications

Biogeography-based optimization (BBO) is a population-based evolutionary algorithm (EA) that is based on the mathematics of biogeography. Biogeography is the study of the geographical distribution of biological organisms. We present a simplified version of BBO and perform an approximate analysis of the BBO population using probability theory. Our analysis provides approximate values for the expected number of generations before the population's best solution improves, and the expected amount of improvement. These expected values are functions of the population size. We quantify three behaviors as the population size increases: first, we see that the best solution in the initial randomly generated …

On Active Disturbance Rejection Based Control Design For Supercomputing Rf Cavities, John Vincent, Dan Morris, Nathan Usher, Zhiqiang Gao, Shen Zhao, Achille Nicoletti, Qinling Zheng

Electrical and Computer Engineering Faculty Publications

Superconducting RF (SRF) cavities are key components of modern linear particle accelerators. The National Superconducting Cyclotron Laboratory (NSCL) is building a 3 MeV/u re-accelerator (ReA3) using SRF cavities. Lightly loaded SRF cavities have very small bandwidths (high Q) making them very sensitive to mechanical perturbations whether external or self-induced. Additionally, some cavity types exhibit mechanical responses to perturbations that lead to high-order non-stationary transfer functions resulting in very complex control problems. A control system that can adapt to the changing perturbing conditions and transfer functions of these systems would be ideal. This paper describes the application of a control …

A Silicon Nanoparticle-Based Polymeric Nano-Composite Material For Glucose Sensing, Qiang Liu, Munir H. Nayfeh, Siu-Tung Yau

Electrical and Computer Engineering Faculty Publications

A novel non-enzyme glucose sensing material has been prepared by incorporating ultrasmall (1–3 nm) silicon nanoparticles in polyaniline, a conducting polymer, as a nano-composite material (NCM). When deposited on electrodes, the composite material with three-dimensional loading of the nanoparticles showed a significantly enhanced amperometric response to glucose, compared to the nanoparticles deposited on bare electrodes and electrodes immobilized with the enzyme, glucose oxidase. The linear range of the glucose response of NCM electrodes covered both the hypo- and hyper-glycaemic glucose levels. The sensitivity of the NCM electrodes was 2.5 μA cm⁻² mM⁻¹. The NCM electrodes’ selectivity for …

On Active Disturbance Rejection Based Control Design For Superconducting Rf Cavities, John Vincent, Dan Morris, Nathan Usher, Zhiqiang Gao, Shen Zhaob, Achille Nicoletti, Qinling Zheng

Electrical and Computer Engineering Faculty Publications

Superconducting RF (SRF) cavities are key components of modern linear particle accelerators. The National Superconducting Cyclotron Laboratory (NSCL) is building a 3 MeV/u re-accelerator (ReA3) using SRF cavities. Lightly loaded SRF cavities have very small bandwidths (high Q) making them very sensitive to mechanical perturbations whether external or self-induced. Additionally, some cavity types exhibit mechanical responses to perturbations that lead to high-order non-stationary transfer functions resulting in very complex control problems. A control system that can adapt to the changing perturbing conditions and transfer functions of these systems would be ideal. This paper describes the application of a control technique …

Striation-Based Beamforming For Estimating The Waveguide Invariant With Passive Sonar, Lisa M. Zurk, Daniel Rouseff

Electrical and Computer Engineering Faculty Publications and Presentations

The waveguide invariant summarizes the pattern of constructive and destructive interference between acoustic modes propagating in the ocean waveguide. For many sonar signal-processing schemes, it is essential to know the correct numerical value for the waveguide invariant. While conventional beamforming can estimate the ratio between the waveguide invariant and the range to the source, it cannot unambiguously separate the two terms. In the present work, striationbased beamforming is developed. It is shown that the striation-based beamformer can be used to produce an estimate for the waveguide invariant that is independent of the range. Simulation results are presented.

Calibration Of Complex System Dynamics Models: A Practioner's Report, Rod Walker, Wayne Wakeland

Complex Systems Faculty Publications and Presentations

This paper is not a typical academic paper that is solidly grounded in the literature. Instead, this paper reports practitioner’s experiences in rebuilding and calibrating a very large system dynamics model. A prior version of this model had been in use for over 10 years in an ongoing executive training simulation. That model had never worked correctly in several key areas, requiring the outputs to be manually adjusted by very experienced facilitators during the course of the simulation. The present project rebuilt the system dynamics model, redesigned the parts that weren’t working, and calibrated the resulting model to match the …

A Simple Ultrasensitive Displacement Sensor Based On A High Bend Loss Single-Mode Fibre And A Ratiometric Measurement System, Pengfei Wang, Gilberto Brambilla, Yuliya Semenova, Qiang Wu, Gerald Farrell

Articles

An all-fibre displacement sensor with a simple configuration and capable of monitoring sub-50 nm displacements is proposed and investigated experimentally. The proposed fibre displacement sensor consists of a half-loop structure of bare high bend loss single-mode fibre 1060XP and a ratiometric power interrogation system. By measuring the change in transmission ratio in the ratiometric system, a change in displacement can be measured. The displacement sensor is sensitive to temperature and an experimental investigation of this sensitivity is presented. It is found that the peak shift response has a linear variation with temperature; therefore, temperature dependence can be mitigated by a …

Applying Bayesian Forecasting To Predict New Customers' Heating Oil Demand, Tsuginosuke Sakauchi

Master's Theses (2009 -)

This thesis presents a new forecasting technique that estimates energy demand by applying a Bayesian approach to forecasting. We introduce our Bayesian Heating Oil Forecaster (BHOF), which forecasts daily heating oil demand for individual customers who are enrolled in an automatic delivery service provided by a heating oil sales and distribution company. The existing forecasting method is based on linear regression, and its performance diminishes for new customers who lack historical delivery data. Bayesian methods, on the other hand, respond effectively in the start-up situation where no prior data history is available.

Our Bayesian Heating Oil Forecaster uses forecasters' past …

Design For Soft Error Tolerance In Fpga-Implemented Asynchronous Circuits, Yu Bai

Theses and Dissertations - UTB/UTPA

This research in its present form is the result of experimentation on effect of soft error in FPGA-implemented asynchronous circuit. The conclusion are drawn that asynchronous circuit are much easier to detect soft error than synchronous circuits. The asynchronous circuit is implemented in FPGA with software fault injection method to analyze the behavior of soft error generation in FPGA implementation asynchronous circuits. The proposed detection circuit can detect all soft errors that generated in FPGA-implemented asynchronous circuit. The contributions include: investigation of FPGA structure, investigation of soft error model in FPGA, mechanism of FPGA implemented asynchronous circuit, behavior of soft …