Other Electrical and Computer Engineering Commons^™

Improvements In Genetic Approach To Pole Placement In Linear State Space Systems Through Island Approach Pga With Orthogonal Mutation Vectors, Arnold Cassell

UNF Graduate Theses and Dissertations

This thesis describes a genetic approach for shaping the dynamic responses of linear state space systems through pole placement. This paper makes further comparisons between this approach and an island approach parallel genetic algorithm (PGA) which incorporates orthogonal mutation vectors to increase sub-population specialization and decrease convergence time.

Both approaches generate a gain vector K. The vector K is used in state feedback for altering the poles of the system so as to meet step response requirements such as settling time and percent overshoot. To obtain the gain vector K by the proposed genetic approaches, a pair of ideal, desired …

Fast Super-Resolution With Affine Motion Using An Adaptive Wiener Filter And Its Application To Airborne Imaging, Russell C. Hardie, Kenneth J. Barnard, Raúl Ordóñez

Electrical and Computer Engineering Faculty Publications

Fast nonuniform interpolation based super-resolution (SR) has traditionally been limited to applications with translational interframe motion. This is in part because such methods are based on an underlying assumption that the warping and blurring components in the observation model commute. For translational motion this is the case, but it is not true in general. This presents a problem for applications such as airborne imaging where translation may be insufficient. Here we present a new Fourier domain analysis to show that, for many image systems, an affine warping model with limited zoom and shear approximately commutes with the point spread function …

Development Of Spray Cooling For High Heat Flux Electronics, Jeremy Scott Junghans

Graduate Theses and Dissertations

The thermal demands of modern day electronic systems require innovative thermal solutions. Spray cooling has proven to be able to cool heat fluxes orders of magnitude higher than traditional cooling methodologies. This work includes a comparison of spray cooling to standard thermal management methodologies. Key system parameters and considerations are discussed. The properties of available packaging materials and their effect on the reliability of a spray cooled system are presented. Parameters such as fluid temperature, droplet size, fluid velocity and flow rate all directly impact performance and are detailed in this work. Finally, results from of a wide range of …

Development And Prototyping Of A Ground Fault Circuit Interrupter For 3-Phase 480 Volt Systems, Matthew R. Norlander

Master's Theses

Ground Fault Circuit Interrupter (GFCI) technology was first introduced in the NEC in 1971, yet four decades later the technology has not been introduced to a great extent outside of the home environment. This thesis introduces the difficulties encountered in low-voltage three phase ground fault current detection, and adopts a previously patented tripping scheme to develop and prototype a digital relay for 3-phase 480 volt systems capable of the sensitivity and speed required for personnel safety. Results demonstrate the feasibility of the concept and suggest commercial development should be pursued. The prototype is capable of mA sensitivity and reliably detects …

Integrated Approach To Free Space Optical Communications In Strong Turbulence, Jason A. Tellez

Theses and Dissertations

The propagation of a free space optical communication signal through atmospheric turbulence experiences random fluctuations in intensity, including signal fades which negatively impact the communications link performance. This research develops an analytical probability density function (PDF) to model the best case scenario of using multiple independent beams to reduce the intensity fluctuations. The PDF was further developed to account for partially correlated beams, such as would be experienced by beams having finite separation. The PDF was validated with results obtained from digital simulations as well as lab experiments. The research showed that as the number of transmitted beams increases the …

Chaotic Bandgaps In Hybrid Acousto-Optic Feedback And Their Implications, Monish Ranjan Chatterjee, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

The nonlinear dynamics of a hybrid acousto-optic device was examined from the perspective of the Lyapunov exponent (LE) and bifurcation maps. The plots for LE versus system parameters and bifurcation maps have recently been examined against known simulation results including chaotic encryption experiments [1]. It is verified that the "loop gain" (feedback gain (β) times incident light amplitude (Iin) needs to be greater than one as a necessary , but not sufficient condition for the onset of chaos.

It is found that for certain combinations of β, Iin, net bias voltage (αtοt), and the initial value of the first-order scattered …

902–928mhz Uhf Rfid Tag Antenna Design, Fabrication And Test, Chiweng Kam

Master's Theses

Radio Frequency Identification (RFID) uses RF radiation to identify physical objects. With decreasing integrated circuit (IC) cost and size, RFID applications are becoming economically feasible and gaining popularity. Researchers at MIT suggest that RFID tags operating in the 900 MHz band (ultrahigh frequency, UHF) represent the best compromise of cost, read range, and capabilities [1]. Passive RFID tags, which exclude radio transmitters and internal power sources, are popular due to their small size and low cost [1].

This project produced Cal Poly’s first ever on-campus printed, assembled, and operational UHF (902 to 928 MHz) passive RFID tag. Project goals include …

Face Detection And Lip Localization, Benafsh Nadir Husain

Master's Theses

Integration of audio and video signals for automatic speech recognition has become an important field of study. The Audio-Visual Speech Recognition (AVSR) system is known to have accuracy higher than audio-only or visual-only system. The research focused on the visual front end and has been centered around lip segmentation. Experiments performed for lip feature extraction were mainly done in constrained environment with controlled background noise. In this thesis we focus our attention to a database collected in the environment of a moving car which hampered the quality of the imagery.

We first introduce the concept of illumination compensation, where we …

Wireless Embedded Smart Cameras: Performance Analysis And Their Application To Fall Detection For Eldercare., Alvaro Pinto

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Wireless Embedded Smart Camera Networks has received a lot of attention from academia and industry because they are small in size and easy to deploy, and they offer a multitude of attractive applications. They can be used for embedded single unit applications, or can be networked for multi-camera applications.

We first analyze three different operation scenarios for a wireless vision sensor network wherein different levels of local processing is performed. A detailed quantitative comparison of three operation scenarios are presented in terms of energy consumption and latency. This quantitative analysis provides the motivation for performing high-level local processing and decision …

Characterization Of Parallel Application Runtime Sensitivity On Multi-Core High Performance Computing Systems, Padma Priya Veeraraghavan

Purdue Polytechnic Masters Theses

A commonly seen behavior of parallel applications is that their runtime is influenced by network communication load. The way a parallel application is run in a network and the presence of other applications and processes in the network can contribute to a wide range of variations in the runtime. Therefore, in order to achieve consistent and optimal runtimes, it is important to understand and characterize the runtime sensitivity of parallel applications with respect to execution under the presence of network communication load.

In this research, runtime sensitivities for various parallel applications were studied by applying additional network communication load. In …

Performance Analysis And Optimization Of The Winnow Secret Key Reconciliation Protocol, Kevin C. Lustic

Theses and Dissertations

Currently, private communications in public and government sectors rely on methods of cryptographic key distribution that will likely be rendered obsolete the moment a full-scale quantum computer is realized, or efficient classical methods of factoring are discovered. There are alternative methods for distributing secret key material in a post-quantum era. One example of a system capable of securely distributing cryptographic key material, known as Quantum Key Distribution (QKD), is secure against quantum factorization techniques as its security rests on generally accepted laws of quantum physics. QKD protocols typically include a phase called Error Reconciliation, a clear-text classical-channel discussion between legitimate …

Formula Hybrid Primary Electrical Systems Senior Project Report, Gregg Schultz, Matthew (Matt) Tolman

Electrical Engineering

This senior project involves the "Primary electrical systems" (excluding data-acquisition) for Cal Poly’s Hybrid Racecar Team: SAE Formula Hybrid. Effectively, this project involves the high-voltage and low-voltage electrical systems one would typically find in an electric car, with the addition of some circuitry for an on-board battery charger. The primary electrical systems need to follow strict rules and guidelines as given by the Formula Hybrid Competition, as well as provide reliable and high-performance operation to ensure a competition-worthy vehicle. In addition to designing, building, testing, and competing with the Primary electrical systems, we will also generate a detailed step-by-step "guide" …

Audio-Triggered El Wire Sequencer, Benjamin (Ben) Paik

Electrical Engineering

“Development of an Audio-Triggered EL Wire Sequencer” California Polytechnic State University 2011, Ben Paik and John Oliver, Ph.D. (advisor)

The purpose of this project is to investigate and develop a method for switching electroluminescent wire (EL wire) such that it can be activated by some audio source.  EL wire is essentially a coaxial capacitor that luminesces when an alternating electric field excites the insulating phosphor layer in the wire (a 100Vp, 1kHz AC source is sufficient for this).   The system involves the EL wire, a six channel sequencer to switch the EL wire, an method for processing the audio signal, …

Terrain Classification For Autonomous Rmax Helicopter Search And Rescue, Erin West

Electrical Engineering

No abstract provided.

Development Of Wind Tunnel For Laboratory Wind Turbine Testing, Danny Alexander Zepeda

Electrical Engineering

A wind tunnel with a 0.5 HP motor was purchased by Cal Poly Electrical Engineering Department from Hampden for $16,000. It can only simulate winds of up to 10 MPH. The tunnel has a manual dial that controls the wind speed. It also measures the voltage and current output with an analog measure display. This wind tunnel was expensive and unfortunately cannot achieve very high wind speeds. For this reason, a similar wind tunnel with more potential and with a smaller budget was proposed to be built for use in the Sustainable Energy Lab. The new wind tunnel that was …

Bridgeless Active Power Factor Correction Using A Current Fed Push Pull Converter, Jeramie Seth Bianchi

Master's Theses

ABSTRACT

Bridgeless Active Power Factor Correction

Using a Current Fed Push Pull Converter

Jeramie Seth Bianchi

Switched Mode Power Supplies have become increasingly popular for efficient methods of delivering power to an assortment of electronic devices. This thesis proposes a method of using a current fed push pull converter to provide active power factor correction and rectification in a single stage. While most AC-DC converters utilize a bridge rectifier to convert AC-DC and then perform DC-DC conversion, the proposed circuit will utilize its output diodes to perform rectification, thus eliminating the need for a bridge rectifier. This circuit will also …

Low-Power Self-Sustaining Schedule Display, Samuel (Sam) August

Electrical Engineering

The completed project is an Amazon Kindle, powered by a USB solar charger, running a student designed program to display a weekly schedule for a faculty member.  The purpose of the project was to design a sustainable electronic schedule display for use outside a faculty office.  It was designed in the hopes that faculty members could more easily update their schedules, and possibly allow for students to schedule appointments.  The program was designed using Java and the solar-charger was designed using a solar cell, Schottky diode, and a USB to micro-B USB cable.

Dyl-Light: An Acn Controlled, Rgbw Led Light Fixture, Dylan Pavelko

Electrical Engineering

The Dyl-Light is a LED lighting fixture that is controlled with a recently released suite of entertainment technology protocols called A.C.N. This new protocol has a number of advantages to its use over the existing protocol, DMX512, used for controlling entertainment lighting fixtures. This project attempts to use this new protocol to directly control a light fixture, something that currently is not available on the market.

The project includes several aspects of engineering from electronics, embedded systems, applications, networking, power electronics, and computer interfacing.

Discrete Alarm Clock, Travis Moore, Collin Barth

Electrical Engineering

The standard alarm clock, as used daily by millions worldwide, has clear room for modification and improvement.  This paper documents an implementation that rectifies many of these flaws.  Improvements include adjustable snooze length, an IR remote for ease of use, and an RF headset for discrete alarm use or potential incorporation into a device much like a hearing aid.  The processes involved in creating a digital alarm clock, as well as the obstacles met in the implementation of the enhanced design, are detailed within.

Wireless Sensor Network For Energy And Environmental Monitoring: Helping Old Buildings Go Green, Jacob Power

Electrical Engineering

Today, the rising cost of energy and social trend of “going green” has put increasing pressure on commercial property owners to improve the efficiency of their investments.  There is good reason for this, too.  In the State of California, office buildings represent the single largest user of energy in the commercial sector.  This project consisted of the design, implementation, construction, testing, and deployment of a wireless sensor network for energy and environmental monitoring in retrofit commercial office installations.  The analyzed data generated by this system can be used by building management and owners to identify areas of inefficiency within the …