Holographic Optical Elements For Visible Light Applications In Photo-Thermo-Refractive Glass,
2019
University of Central Florida
Holographic Optical Elements For Visible Light Applications In Photo-Thermo-Refractive Glass, Fedor Kompan
Electronic Theses and Dissertations
This dissertation reports on design and fabrication of various optical elements in Photo-thermo-refractive (PTR) glass. An ability to produce complex holographic optical elements (HOEs) for the visible spectral region appears very beneficial for variety of applications, however, it is limited due to photosensitivity of the glass confined within the UV region. First two parts of this dissertation present two independent approaches to the problem of holographic recording using visible radiation. The first method involves modification of the original PTR glass rendering it photosensitive to radiation in the visible spectral region and, thus, making possible the recording of holograms in PTR …
Third-Order Optical Nonlinearities For Integrated Microwave Photonics Applications,
2019
University of Central Florida
Third-Order Optical Nonlinearities For Integrated Microwave Photonics Applications, Marcin Malinowski
Electronic Theses and Dissertations
The field of integrated photonics aims at compressing large and environmentally-sensitive optical systems to micron-sized circuits that can be mass-produced through existing semiconductor fabrication facilities. The integration of optical components on single chips is pivotal to the realization of miniature systems with high degree of complexity. Such novel photonic chips find abundant applications in optical communication, spectroscopy and signal processing. This work concentrates on harnessing nonlinear phenomena to this avail. The first part of this dissertation discusses, both from component and system level, the development of a frequency comb source with a semiconductor mode-locked laser at its heart. New nonlinear …
Practical Methods For Source Separation In Emc Measurements,
2019
Missouri University of Science and Technology
Practical Methods For Source Separation In Emc Measurements, Yuanzhuo Liu
Masters Theses
"Electromagnetic emission is critical in the electronic industry with the rapid growth of the development of the electronic device. To identify the emission from the multipule sources, two methods are proposed in the near field scan and total radiated power measurement respectively.
The first method can be applied in the measurement of the field generated by multiple non-correlated sources. The contribution of each source is determined using a blind source separation (BSS) technique. The measurements are performed using one scanning probe and stationary reference probes, avoiding the need to measure the spatial correlations of the random field. The resolving result …
Sensing Of Multiple Parameters With Whispering Gallery Mode Optical Fiber Micro-Resonators,
2019
Technological University Dublin
Sensing Of Multiple Parameters With Whispering Gallery Mode Optical Fiber Micro-Resonators, Arun Kumar Mallik Dr, Vishnan Kavungal, Gerald Farrell, Yuliya Semenova
Conference Papers
Monitoring of multiple physical parameters, such as humidity, temperature, strain, concentrations of certain chemicals or gases in various environments is of great importance in many industrial applications both for minimizing adverse effects on human health as well as for maintaining production levels and quality of products. In this paper we demonstrate two different approaches to the design of multi-parametric sensors using coupled whispering gallery mode (WGM) optical fiber micro-resonators. In the first approach, a small array of micro-resonators is coupled to a single fiber taper, while in the second approach each of the micro-resonators within an array is coupled to …
Enhancing The Resolution Of Imaging Systems By Spatial Spectrum Manipulation,
2019
Michigan Technological University
Enhancing The Resolution Of Imaging Systems By Spatial Spectrum Manipulation, Wyatt Adams
Dissertations, Master's Theses and Master's Reports
Much research effort has been spent in the 21st century on superresolution imaging techniques, methods which can beat the diffraction limit. Subwavelength composite structures called ``metamaterials" had initially shown great promise in superresolution imaging applications in the early 2000s, owing to their potential for nearly arbitrary capabilities in controlling light. However, for optical frequencies they are often plagued by absorption and scattering losses which can decay or destroy their interesting properties. Similar issues limit the application of other superresolution devices operating as effective media, or metal films that can transfer waves with large momentum by supporting surface plasmon polaritons. In …
Non-Invasive Microwave And Millimeter Wave Reflectometry And Imaging For Human Skin Diagnosis And Materials Characterization,
2019
Missouri University of Science and Technology
Non-Invasive Microwave And Millimeter Wave Reflectometry And Imaging For Human Skin Diagnosis And Materials Characterization, Yuan Gao
Doctoral Dissertations
"Microwave and millimeter wave reflectometry and synthetic aperture radar (SAR) imaging techniques have been successfully applied in many applications, such as nondestructive testing and evaluation (NDT&E), security inspection and medical diagnosis. In this dissertation, the feasibility of using microwave and millimeter reflectometry and SAR imaging for burn diagnosis is investigated through both simulations and measurements, with promising results. To correctly model the interaction between electromagnetic waves and skin, the proper knowledge of the complex permittivity of healthy skin is critically important. To this end, the common used measurement methods for in vivo skin complex permittivity are reviewed and analyzed in …
Passive Harmonic Generation At Spring Contacts,
2019
Missouri University of Science and Technology
Passive Harmonic Generation At Spring Contacts, Sen Yang
Doctoral Dissertations
"In the first paper, the RF passive harmonic generation phenomenon on the spring contact is studied. A spring contact harmonic generation measurement system is developed. The factors that may have an impact on the spring contact harmonic generation, such as contact material, contact force, and contact resistance are characterized by the measurement system. The gold-to-gold contact is found to be much superior to the stainless-steel contacts. It is also found that the passive nonlinearity at the spring contact is the semiconductor-like junction formed by the surface oxide film.
In the second paper, we show that the maximum E-field coupling occurs …
Modeling Strategies For Estimating And Suppressing Electromagnetic Interference And Improving Power Integrity,
2019
Missouri University of Science and Technology
Modeling Strategies For Estimating And Suppressing Electromagnetic Interference And Improving Power Integrity, Tamar Makharashvili
Doctoral Dissertations
"Decoupling capacitors are used to suppress high-frequency noise in power distribution networks. The inductance associated with a mounted decoupling capacitor can vary by 26% depending on characteristics of the printed circuit board. Here, simple and accurate inductance models of 2- and 8-terminal capacitors including connections to the power and return plane are developed. Circuit models of the capacitors and layout are created using the partial equivalent element circuit method which provide options for circuit-level simulations as well as analytic estimation of inductance. The circuit solution matches results from the full-wave simulation model within 9% for the 8-terminal capacitor and within …
Formulation And Implementation Of Iterative Method For Generating Spatially-Variant Lattices,
2019
University of Texas at El Paso
Formulation And Implementation Of Iterative Method For Generating Spatially-Variant Lattices, Manuel Fernando Martinez
Open Access Theses & Dissertations
The use of a matrix-free, memory-efficient approach to generate large-scale spatially variant lattices (SVL) was explored. A matrix-free iterative SVL generation algorithm was formulated and then implemented with a tremendous memory reduction observed. The algorithm consists of solving first-order central finite-differences along the entirety of the problem space point-by-point to obtain the grating phase function Φ(𝑠⃗) to which all desired spatially variant lattice properties are applied to. The algorithm was studied to identify key areas of data and task parallelism to exploit in heterogeneous computing systems consisting of clusters of central processing units (CPU) and graphics processing units (GPU) combinations. …
Electro-Optic Antenna Elements For Passive Phased Array Radar,
2019
Michigan Technological University
Electro-Optic Antenna Elements For Passive Phased Array Radar, Evan Gawron
Dissertations, Master's Theses and Master's Reports
Passive phased antenna arrays are utilized in military and civilian radar systems to determine the received signal origination. Phased array placement for optimal reception is challenging due to the required supporting electronic hardware and the associated coaxial cabling that typically accompanies each antenna channel. Low noise amplifiers and frequency conversion hardware add size and complexity, limiting possible positions for phased array placement. Eliminating required phased array electronic subcomponents without sacrificing function would allow placement onto smaller agile platforms, such as unmanned systems and rapid deployment networks. Electro-optic (EO) antenna elements utilize an optical waveguide embedded between the antenna and ground …
Engineering Plasmonic Nanostructures For Light Management And Sensing,
2019
West Virginia University
Engineering Plasmonic Nanostructures For Light Management And Sensing, Sujan Phani Kumar Kasani
Graduate Theses, Dissertations, and Problem Reports (ETD)
The two major global problems are to provide health safety and to meet energy demands for ever growing population on a large scale. The study of light interaction with nanostructures has shown a promising solution in improving the fields of bio-sensor and solar energy devices which addresses above mentioned two major global problems. Nanostructures have tunable physicochemical properties such as light absorption, electrical and thermal properties unlike bulk materials, which gives an advantage in applications like bio-sensing and energy harvesting devices. The development of nanofabrication techniques along with the discovery of Surface Enhanced Raman Scattering (SERS) and Plasmon Enhanced Fluorescence …
Modeling Land Subsidence Using Insar And Airborne Electromagnetic Data: Dataset,
2019
Missouri University of Science and Technology
Modeling Land Subsidence Using Insar And Airborne Electromagnetic Data: Dataset, Ryan G. Smith, R. Knight
Research Data
Supporting dataset for article published in Water Resources Research, Volume 55, Issue 4, pages 2801-2819
Optical Micro-Seismometer Based On Evanescent Field Perturbation Of Whispering Gallery Modes,
2018
Southern Methodist University
Optical Micro-Seismometer Based On Evanescent Field Perturbation Of Whispering Gallery Modes, Jaime Da Silva
Mechanical Engineering Research Theses and Dissertations
This thesis proposes a light-weight, compact, and accurate optical micro-seismometer that could be used in many applications, such as planetary exploration. The sensor proposed here is based on the principle of whispering gallery optical mode (WGM) resonance shifts of a dielectric micro-resonator due to disturbances of its evanescent field. The micro-seismometer could be used in place of the traditional bulky seismometers. The design of a waveguide-resonator and mechanical structure to disturb the evanescent field are presented. A proof-of-concept a seismometer model that uses a 5µm ring resonator is numerically tested with actual seismic data. The results show that a WGM-based …
Design Synthesis Of Flexible Antennas Using Artificial Neural Network,
2018
University of Arkansas Little Rock
Design Synthesis Of Flexible Antennas Using Artificial Neural Network, Ali Isam Hammoodi
Theses and Dissertations
Nowadays, flexible devices have witnessed a great deal of interest in both industrial and academia. Consistently, flexible electronic systems require the integration of a conformal and flexible antenna operating in specific frequency bands to provide wireless connectivity which is highly demanded in today’s information-oriented society. Designing of microstrip antenna has become the focus of modern technologies due to their light weight, ease of fabrication, and ability to integrate electronics devices. Simple structure such has square patch, circular patch, or rectangular patch are easy to maintain using empirical equations which based on some experimental results. However, more complicated structures are hard …
Growth And Behaviors Of Inn/Gan Multiple Quantum Wells By Plasma-Assisted Molecular Beam Epitaxy,
2018
University of Arkansas, Fayetteville
Growth And Behaviors Of Inn/Gan Multiple Quantum Wells By Plasma-Assisted Molecular Beam Epitaxy, Chen Li
Graduate Theses and Dissertations
Fully realizing the potential of InGaN semiconductors requires high quality materials with arbitrary In-content. To this date the growth of In-rich InGaN films is still challenging since it suffers from the low growth temperatures and many detrimental alloying problems. InN/GaN multiple quantum wells (MQWs) and super lattices (SLs) are expected to be promising alternatives to random InGaN alloys since in principle they can achieve the equivalent band gap of InGaN random alloys with arbitrarily high In-content and at the same time bypass many growth difficulties.
This dissertation focuses on studying the growth mechanisms, structural properties and energy structures of InN/GaN …
Growth And Characterization Of Silicon-Germanium-Tin Semiconductors For Future Nanophotonics Devices,
2018
University of Arkansas, Fayetteville
Growth And Characterization Of Silicon-Germanium-Tin Semiconductors For Future Nanophotonics Devices, Bader Saad Alharthi
Graduate Theses and Dissertations
The bright future of silicon (Si) photonics has attracted research interest worldwide. The ultimate goal of this growing field is to develop a group IV based Si foundries that integrate Si-photonics with the current complementary metal–oxide–semiconductor (CMOS) on a single chip for mid-infrared optoelectronics and high speed devices. Even though group IV was used in light detection, such as photoconductors, it is still cannot compete with III-V semiconductors for light generation. This is because most of the group IV elements, such as Si and germanium (Ge), are indirect bandgap materials. Nevertheless, Ge and Si attracted industry attention because they are …
Optimizing The Plasmonic Enhancement Of Light In Metallic Nanogap Structures For Surface-Enhanced Raman Spectroscopy,
2018
University of Arkansas, Fayetteville
Optimizing The Plasmonic Enhancement Of Light In Metallic Nanogap Structures For Surface-Enhanced Raman Spectroscopy, Stephen Joseph Bauman
Graduate Theses and Dissertations
Technology based on the interaction between light and matter has entered something of a renaissance over the past few decades due to improved control over the creation of nanoscale patterns. Tunable nanofabrication has benefitted optical sensing, by which light is used to detect the presence or quantity of various substances. Through methods such as Raman spectroscopy, the optical spectra of solid, liquid, or gaseous samples act as fingerprints which help identify a single type of molecule amongst a background of potentially many other chemicals. This technique therefore offers great benefit to applications such as biomedical sensors, airport security, industrial waste …
Mems Variable Area Capacitor For Room Temperature Electrometry,
2018
Air Force Institute of Technology
Mems Variable Area Capacitor For Room Temperature Electrometry, George C. Underwood, Tod V. Laurvick
Faculty Publications
This paper introduces a new way to detect charge using MEMS variable capacitors for extremely sensitive, room temperature electrometry. It is largely based on the electrometers introduced by Riehl et al. [1] except variable capacitance is created by a changing area, not a changing gap. The new scheme will improve MEMS electrometers by eliminating the effects of squeeze-film damping and by theoretically increasing the maximum charge resolution by 70%. The charge conversion gain (the increase in output voltage per input unit charge) for this system is derived. The result show good agreement with MATLAB calculations.
Electromagnetic Wave-Matter Interactions In Complex Opto-Electronic Materials And Devices,
2018
Louisiana Tech University
Electromagnetic Wave-Matter Interactions In Complex Opto-Electronic Materials And Devices, Raj Kumar Vinnakota
Doctoral Dissertations
This dissertation explores the fundamentals of light-matter interaction towards applications in the field of Opto-electronic and plasmonic devices. In its core, this dissertation attempts and succeeds in the the modeling of light-matter interactions, which is of high importance for better understanding the rich physics underlying the dynamics of electromagnetic field interactions with charged particles. Here, we have developed a self-consistent multi-physics model of electromagnetism, semiconductor physics and thermal effects which can be readily applied to the field of plasmotronics and Selective Laser Melting (SLM). Plasmotronics; a sub-field of photonics has experienced a renaissance in recent years by providing a large …
Effective Magnetic And Electric Response Of Composite Materials,
2018
Louisiana Tech University
Effective Magnetic And Electric Response Of Composite Materials, Mona Hassan Alsaleh
Doctoral Dissertations
Metamaterials (MMs) are nanocomposite materials consisting of metal-dielectric resonators much smaller in size than the wavelength of the incident light. Common examples of metamaterials are based on split ring resonators (SRRs), parallel wires or strips and fishnet structures. These types of materials are designed and fabricated in order to provide unique optical responses to the incident electromagnetic radiation that are not available in naturally existing materials. The MMs can exhibit unusual properties such as strong magnetism at terahertz (THz) and optical frequencies. Additionally, negative index materials (NIMs) can provide negative index of refraction which can be used in many applications …
