Electrical and Electronics Commons^™

Separation Study Of Titanomagnetite Fe3-Xtixo4 From Natural Sand At Indramayu, West Java, Sunaryo Sunaryo, Iwan Sugihartono

Makara Journal of Technology

Separation Study of Titanomagnetite Fe3-xTixO4 from Natural Sand at Indramayu, West Java. Titanomagnetite FeTiO4 has been obtained from metal sand which is separated from natural sand at Indramayu using magnetic separator with the magnetic field 0,3 Tesla. This method can improve titanomagnetite content from 32% to 63,6%. According to X-ray diffractometer (XRD) and data processing by general structure analyses system (GSAS) with χ2= 1,454 and Wrp = 0,1142 as correction factor of the peak to peak intensities, we conclude that χ2 about 0 and Wrp aproximately 10%. It indicates the datas with the error merely 0,1 can be accepted. Furthermore, …

Hydrogen Absorption Induced Slow Crack Growth In Austenitic Stainless Steels For Petrochemical Pressure Vessel Industries, Ronnie Higuchi Rusli

Makara Journal of Technology

Type 304L and type 309 austenitic stainless steels were tested either by exposed to gaseous hydrogen or undergoing polarized cathodic charging. Slow crack growth by straining was observed in type 304L, and the formation of α‘ martensite was indicated to be precursor for such cracking. Gross plastic deformation was observed at the tip of the notch, and a single crack grew slowly from this region in a direction approximately perpendicular to the tensile axis. Martensite formation is not a necessary condition for hydrogen embrittlement in the austenitic phase.

Development Of Technology Parameter Towards Shipbuilding Productivity Predictor Using Cubic Spline Approach, Bagiyo Suwasono, Sjarief Widjaja, Achmad Zubaydi, Zaed Yuliadi, I Nyoman Budiantara

Makara Journal of Technology

Development of Technology Parameter Towards Shipbuilding Productivity Predictor Using Cubic Spline Approach. Ability of production processes associated with state-of-the-art technology, which allows the shipbuilding, is customized with modern equipment. It will give impact to level of productivity and competitiveness. This study proposes a nonparametric regression cubic spline approach with 1 knot, 2 knots, and 3 knots. The application programs Tibco Spotfire S+ showed that a cubic spline with 2 knots (4.25 and 4.50) gave the best result with the value of GCV = 56.21556, and R2 = 94.03%.Estimation result of cubic spline with 2 knots for the PT. Batamec shipyard …

Shaft Torsional Vibration Response Of Vertical Axis Ocean Current Turbine Model Due To Torque Excitation, Adi Wirawan Husodo, I Ketut Aria Pria Utama, I Made Ariana

Makara Journal of Technology

Shaft Torsional Vibration Response of Vertical Axis Ocean Current Turbine Model Due to Torque Excitation. The current research aimed to study the torsional vibration response of Vertical Axis Ocean Current Turbine due to randomly torque excitation pattern, owing to the variety of ocean current velocity. The turbine model is composed of 3 aluminum blades of NACA 0018 connected to steel shaft. Turbine dimensions are 10 cm of chord, 1.8 cm of chamber and 100 cm of span. The variation of ocean current velocity is 0.5 m/s, 1.0 m/s, 1.5 m/s, 2.0 m/s, 2.5 m/s and 3.0 m/s. The Model has …

A Single-Chip Ultra-Wideband Based Wireless Sensor Network Node, Nathan R. Schemm

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This dissertation presents the design of a next-generation wireless sensor network node. The node incorporates many new and innovative technologies such as an ultra-wideband radio which allows very low-energy communication, a low-power radiation detection front end, and an efficient implementation of dynamic voltage scaling which improves the energy efficiency of the integrated processor. The complete design is integrated on a single chip for maximum power savings and minimal size.

The ultra-wideband transceiver includes many novel techniques to produce a receiver with low power consumption and fast and accurate packet acquisition and reception. These include the use of a standard symmetric …

Doping Dependence Of Electronic And Mechanical Properties Of Gase1−XTeX And Ga1−XInXSe From First Principles, Zs. Rak, S. D. Mahanti, K. C. Mandal, N. C. Fernelius

Faculty Publications

No abstract provided.

Microstrip-Fed Wideband Circularly Polarized Printed Antenna, Xiulong Bao, Max Ammann, Patrick Mcevoy

Articles

A wideband circularly-polarized printed antenna is proposed, which employs an asymmetrical dipole and a slit in the ground plane which are fed by an L-shaped microstrip feedline using a via. The proposed antenna geometry is arranged so that the orthogonal surface currents, which are generated in the dipole, feedline and ground plane, have the appropriate phase to provide circular polarization. A parametric study of the key parameters is made and the mechanism for circular polarization is described. The measured results show that the impedance bandwidth is approximately 1.34 GHz (2.45 GHz to 3.79 GHz) and the 3 dB axial ratio …

Finding The Exact Maximum Impedance Resonant Frequency Of A Practical Parallel Resonant Circuit Without Calculus, Kenneth V. Cartwright, Elton Joseph, Edit J. Kaminsky

Electrical Engineering Faculty Publications

A practical parallel resonant circuit has a resistor in series

with an inductor, and that combination is in parallel with a

capacitor. For such a circuit, it is well known that there are

two possible definitions for the resonant frequency: (i) the

resonant frequency , p f which is the frequency at which the

phase of the total impedance is zero, and (ii) the resonant

frequency m f , which is the frequency that achieves maximum

magnitude of the total impedance. To find the latter

traditionally requires calculus. However, in this paper, the

authors show how m f

can be …

Economic Optimization Of Offshore Wind Farms Using The Geometric Algorithm, Mahidhar Nandigam

Electrical & Computer Engineering Theses & Dissertations

The research project related to this thesis focuses on the optimization of electrical systems for offshore wind farms for a given capacity. The optimal design and planning is a critical issue for developing cost effectively Offshore Wind Farms in energy systems. The Geometric Optimization Algorithms approach has been adopted to develop an optimization program, where the main components of the electrical system of an offshore wind farm and key technical specifications are used as parameters to be optimized for a minimum cost with necessary constraints. The effectiveness of the optimization program can be evaluated with real-time comparison between offshore wind …

Improving Range Estimation Of A 3d Flash Ladar Via Blind Deconvolution, Jason R. Mcmahon

Theses and Dissertations

The purpose of this research effort is to improve and characterize range estimation in a three-dimensional FLASH LAser Detection And Ranging (3D FLASH LADAR) by investigating spatial dimension blurring effects. The myriad of emerging applications for 3D FLASH LADAR both as primary and supplemental sensor necessitate superior performance including accurate range estimates. Along with range information, this sensor also provides an imaging or laser vision capability. Consequently, accurate range estimates would also greatly aid in image quality of a target or remote scene under interrogation. Unlike previous efforts, this research accounts for pixel coupling by defining the range image mathematical …

The Application Of Multi Frequency Resonant Controllers In In A Dfig To Improve Performance By Reducing Unwanted Power And Torque Pulsations And Reducing Current Harmonics., Joseph Kearney, Michael Conlon, Eugene Coyle

Conference papers

The paper describes a method to control the rotor-side and grid side converters in a DFIG when subjected to the effects of network voltage unbalance conditions. Multi Frequency Resonant Controllers are incorporated into the grid side and rotor side converters to assist in the control functions. The Resonant Controllers are tuned to twice the network frequency to assist in the control of power and torque pulsations and to three times the network frequency to assist in the control of the generated third harmonic currents. A DFIG model is implemented in Matlab/Simulink and simulations show the reduction in power and torque …

The Application Of Multi Frequency Resonant Controllers In In A Dfig To Improve Performance By Reducing Unwanted Power And Torque Pulsations And Reducing Current Harmonics., Joseph Kearney, Michael Conlon, Eugene Coyle

Conference papers

The paper describes a method to control the rotor-side and grid side converters in a DFIG when subjected to the effects of network voltage unbalance conditions. Multi Frequency Resonant Controllers are incorporated into the grid side and rotor side converters to assist in the control functions. The Resonant Controllers are tuned to twice the network frequency to assist in the control of power and torque pulsations and to three times the network frequency to assist in the control of the generated third harmonic currents. A DFIG model is implemented in Matlab/Simulink and simulations show the reduction in power and torque …

Return-Path, Multiple-Principal-Angle, Internal-Reflection Ellipsometer For Measuring Ir Optical Properties Of Aqueous Solutions, Rasheed M.A. Azzam

Electrical Engineering Faculty Publications

A retroreflection (return-path) spectroscopic ellipsometer without a wave plate is described that uses an IR-transparent high-refractive-index hemicylindrical semiconductor substrate to measure the optical properties of aqueous solutions from multiple principal angles and multiple principal azimuths of attenuated internal reflection (AIR) at the semiconductor–solution interface. The pseudo-Brewster angle of minimum reflectance for the p polarization is also readily measured using the same instrument. This wealth of data can also be used to characterize thin films at the solid–liquid interface. Simulated results of AIR at the Si–water interface over the 1.2–11 μm IR spectral range are presented in support of this concept. …

Wavelet Based Islanding Detection Of Dc-Ac Inverter Interfaced Dg Systems, Mohamed Moin Hanif, Malabika Basu, Kevin Gaughan

Conference papers

The increased penetration of distributed generation (DG) often connected to grid through dc-ac interface has made islanding detection an important and challenging issue to power engineers. Several methods based on passive and active detection scheme have been proposed in the literature. While passive schemes have a large non detection zone (NDZ), concern has been raised on active method due to its degrading power quality effect. This paper proposes a wavelet based passive islanding detection scheme with almost zero NDZ for dc-ac inverter interfaced grid connected DGs. The key idea is to utilize the spectral changes in the higher frequency components …

Transmission Of P- And S-Polarized Light Through A Prism And The Condition Of Minimum Deviation, R. M.A. Azzam, Ryan M. Adams

Electrical Engineering Faculty Publications

The condition of minimum deviation (MD) by a transparent optically isotropic prism is re-derived, and expressions for the intensity transmittances Tp(θ) and Ts(θ) of an uncoated prism of refractive index n and prism angle α for incident p- ands-polarized light and their derivatives with respect to the internal angle of refraction θ are obtained. When the MD condition(θ=α/2) is satisfied, Ts is maximum and Tp is maximum or minimum. The transmission ellipsometric parametersψt,Δt of a symmetrically coated prism are also shown to be locally stationary with respect to θ at θ=α/2 . The constraint on (n,α) for …

Performance Measures In Acousto-Optic Chaotic Signal Encryption System Subject To Parametric Variations And Additive Noise, Monish Ranjan Chatterjee, Anjan K. Ghosh, Mohammed A. Al-Saedi

Electrical and Computer Engineering Faculty Publications

Signal encryption and recovery using chaotic optical waves has been a subject of active research in the past 10 years. Since an acousto-optic Bragg cell with zeroth- and first-order feedback exhibits chaotic behavior past the threshold for bistability, such a system was recently examined for possible chaotic encryption using a low-amplitude sinusoidal signal applied via the bias input of the sound cell driver.

Subsequent recovery of the message signal was carried out via a heterodyne strategy employing a locally generated chaotic carrier, with threshold parameters matched to the transmitting Bragg cell. The simulation results, though encouraging, were limited to relatively …

Consideration Of Dispersion And Group Velocity Dispersion In The Determination Of Velocities Of Electromagnetic Propagation, Monish Ranjan Chatterjee, Partha P. Banerjee

Electrical and Computer Engineering Faculty Publications

Electromagnetic (EM) propagation velocities play an important role in the determination of power and energy flow in materials and interfaces. It is well known that group and phase velocities need to be in opposition in order to achieve negative refractive index.

Recently, we have shown that considerable differences may exist in phase, group and signal/energy velocities for normal and anomalous dispersion, especially near dielectric resonances. This paper examines the phase and group velocities in the presence of normal and anomalous dispersion, and group velocity dispersion (GVD), which requires introduction of the second order coefficient in the permittivity and permeability models.

Class-F Power Amplifier With Maximized Pae, Kai Shing Tsang

Master's Theses

Due to the rapid development of telecommunication devices, operating speeds are getting faster and more power is being consumed by those devices. Therefore, there is a big concern on how to prolong the battery life in order to fit consumers’ needs. Power amplifiers (PA) at the front end of wireless equipment have drawn a big concern from engineers because of their large power consumption in the system. There is a lot research conducted on PA solutions for improving power-added efficiency (PAE) of amplifiers. PAE is a figure of merit representing how efficient the PA converts DC power to RF power. …

Enhanced Cal Poly Super System Simulink Model, Matthew Ogden Mcfarland

Master's Theses

The Cal Poly Sustainable Power for Electrical Resources (SuPER) project is a solar power DC distribution system designed to autonomously manage and supply the energy needs of a single family off-the-grid home. The following thesis describes the improvement and re-design of a MATLAB Simulink model for the Cal Poly SuPER system. This model includes a photovoltaic (PV) array, a lead-acid gel battery with temperature effects, a wind turbine model, a re-designed DC-DC converter, a DC microgrid, and multiple loads. This thesis will also include several control algorithms such as a temperature controlled thermoelectric (T.E.) cooler, intelligent load switching, and an …

Asynchronous Mips Processors: Educational Simulations, Robert L. Webb

Master's Theses

The system clock has been omnipresent in most mainstream chip designs. While simplifying many design problems the clock has caused the problems of clock skew, high power consumption, electromagnetic interference, and worst-case performance. In recent years, as the timing constraints of synchronous designs have been squeezed ever tighter, the efficiencies of asynchronous designs have become more attractive. By removing the clock, these issues can be mitigated. How- ever, asynchronous designs are generally more complex and difficult to debug. In this paper I discuss the advantages of asynchronous processors and the specifics of some asynchronous designs, outline the roadblocks to asynchronous …