Controls and Control Theory Commons^™

Analysis Of Water Treatment Methods For Circulating Water Supply In Industrial Plants, Djalolitdin Paxritdinovich Mukhitdinov, Nilufar Abdusomi Kizi Yunusova

Chemical Technology, Control and Management

This scientific paper deals with the problem of extracting Ca2+ and Md2+ salts from water in order to prevent the formation of scale on the heating surfaces of heat exchange equipment. The features, advantages and disadvantages of chemical, membrane and ion exchange methods of water treatment have been evaluated. It has been shown that the chemical method of water purification can be used only for the preparation of industrial water at large stations (at the same time, high residual hardness prevails in the water, the equipment has low productivity), and the membrane method requires pretreatment of water, creation of overpressure …

Algorithms For Modal Control Synthesis In Multi-Dimensional Dynamic System, Husan Zakirovich Igamberdiev, Jasur Usmonovich Sevinov, Oqila Husanovna Boyeva

Chemical Technology, Control and Management

Algorithms for the synthesis of modal control of a multidimensional dynamic system with concentrated parameters in the state space have been presented. The problems of modal control of a multidimensional dynamic system have been formulated for the case when the matrix representation of a closed system has a simple structure. The conditions for the solvability of the problem of modal control of a multidimensional dynamic system by means of output feedback have been obtained. To give numerical stability in the procedure of pseudo-circulation of matrices, it is proposed to use the concepts of regular methods in the form of scalar …

Ultrasonic Extraction Of Instant Forms Of Plant Substrates In Industrial Production, Shakhnoza Abduvaxitovna Sultanova, Jasur Safarov, Azamat Bakir O'G'Li Usenov, Doston Ishmuhammat Ogli Samandarov, Qobil Akmal Ogli Mukhiddinov

Chemical Technology, Control and Management

In recent years, both in our country and abroad, ultrasonic extraction methods have been increasingly used in industrial production, which is associated with the extraction of various substances and compounds from natural plant substrates. Domestic and foreign experience shows that this method has significant advantages over traditional methods and can significantly increase the efficiency and profitability of industrial enterprises, producing complete and functional food products.

This article discusses a brief theory of ultrasonic cavitation and the experience of extracting substrates from plants. Different results have been compared and analyzed.

Analysis Of Grain Product Drying Methods, Azizbek Nodirbekovich Yusupbekov, Dilmurod Egamberganov

Chemical Technology, Control and Management

Various drying methods and grain characteristics have been studied. The advantages and disadvantages of various grain drying methods were obtained. The use of the following methods of drying grain products is very useful for speeding up the drying process, reducing waste, achieving more flexible process management and delivering all the nutrients of dried grain and grain products to the subsequent production process. The technological approaches that increase the efficiency of high-quality production after drying grain products, the requirements for modern grain dryers have analyzed. The ways of overcoming the problem of high energy consumption in the process of drying grain …

Implementation Of Distance Learning At Universities Using The Experience Of The Honeywell Process Control Laboratory At Tashkent State Technical University, Nodirbek Rustambekovich Yusupbekov, Adilov Tulkunovich Farukh, Isakova Ismailovna Sitora

Chemical Technology, Control and Management

The experience of modernization of the Honeywell Process Control Laboratory at Tashkent State Technical University has been considered (which is equipped with upgraded equipment (simulators for simulating various technological processes, distance learning tools). As a result, the quality of the demonstration of process control mechanisms increased the availability of theoretical and practical knowledge in the field of automated control systems. They also considered the teaching methods necessary for a modern student – remote access in real time, when students pass a knowledge test, consult with teachers, etc.

Error Of Contactless Converters Of High Currents Of Monitoring And Control Systems From The Influence Of Currents Of Neighboring Buses, A.M. Plakhtiev, Gayratjon Gaziev, Y.A. Meliboev, O. Doniyorov

Chemical Technology, Control and Management

The article presents the general principles of construction of contactless ferromagnetic converters of large direct currents, the main requirements for them, and the results of the development of one of the developed wide-range magnetomodulation contactless converters of control and control systems concerning large electric power facilities. The developed converter, unlike the known ones, have a wide range of controlled currents, increased accuracy and sensitivity, a technological design, and small weight and dimensions at low material consumption and cost. The errors of contactless wide-range magnetomodulation converters from the influence of currents of neighboring buses connected by and the opposite direction are …

Implementation Of The Pid Control Law Of A Multidimensional Dynamic System, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

Most industrial automation facilities are multi-circuit with a significant influence of cross-links between the goals. The paper develops a system for automatic parameter adjustment of a programmable logic controller that implements the proportional-integral-differential control law of a multidimensional dynamic object. The issues of decentralized management of multidimensional dynamic objects are discussed. The control system is based on the method of independent synthesis with static compensation of the impact of cross-links. Additional software has been developed to determine the parameters of the control system. After setting the necessary parameters, the process of automatic adjustment of the controller parameters starts. Self-tuning procedures …

Evaluating Testing Procedures For Openflow Controller Network Re-Provisioning Time, Steven J. Jensen

Theses and Dissertations

Software-Defined Networking promises several advantages over traditional networking architectures, but has seen little adoption. Recently codified controller evaluation methodologies have seen little validation without strong statistical analysis of the results. The research developed an environment testing implementing a published Network Re-provisioning Time methodology to evaluate five OpenFlow controllers. The methodology is strong with required parameters but had issues with some edge cases. Further refinement and adding a convergence metric may close the gaps.

An Examination Of The Fuzzy Inference System On Probabilistic Roadmap Path Planning, Brandon Replogle

Master's Theses

In recent years, multi-robot systems have been widely used in many applications such as warehouse inventory tracking and automatic search and rescue operations. Probability roadmap (PRM) is a typical path planning algorithm that can determine an optimal trajectory once the robot start and goal positions are specified. However, when the number of robots in the system increases, it converges slowly and may even fail to find the solution.

In this thesis, a fuzzy inference system is proposed and combined with the probability roadmap algorithm for robot path planning. Computer simulation results in five different environments show this approach is very …

Problems Of Modeling And Control Of The Technological Process Of Ore Grinding, Djalolitdin Pakhritdinovich Mukhitdinov, Sanjar Boybutayev

Chemical Technology, Control and Management

The article analyzes the methods of mathematical modeling of the closed-loop process of fine grinding of ore in order to predict the composition of the crushed raw material. Analyzed modeling methods that consider the control of classification of crushed raw materials and finished products by the size of the recirculating load, simulation modeling methods, methods that use neuro-phase netthe research apparatus, in which the fuzzy logic apparatus serves as a fundamental component for the formation of conclusions. The materials presented in the article reflect the theoretical substantiation and generalization of the accumulated practical experience in modeling and control of the …

Structural-Parametric Analysis And Synthesis Of Control Systems With Two Degrees Of Freedom, Azizbek Nodirbekovich Yusupbekov, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

Automatic tuning of the parameters of PID - regulators is proposed by means of a modified experiment that takes into account the influence of elements and circuits in the form of additive uncertainty. The use of a multiply connected control scheme with two degrees of freedom for decoupling is proposed in order to facilitate the implementation of a mechanism for combating the phenomenon of integral saturation. Equations are derived for the transition from a circuit with one degree of freedom to a circuit with two degrees of freedom for the general and special cases of a two-dimensional system, which makes …

Algorithm For The Synthesis Of The Control System Of A Double Mass Elastic Dynamic Object, Isomiddin Khakimovich Siddikov, Gulchekhra Rakhimjonovna Alimova, Davronbek Abdalimovich Khalmatov

Chemical Technology, Control and Management

There are dealt with the creation of a control system for a dynamic object with an elastic property, described by a system of second-order differential equations, further transformed into two polynomial equations in matrix form in a paper. In order to solve the problem of synthesizing the control system, two matrix polynomials with unknown parameters were introduced into the system of equations, which is the transfer function of the controller, the order of which is two, giving the system the properties of astatism. To solve the delivered problem posed, the matrix polynomial equation was transformed into a matrix linear equation …

Preparation Of Meta-Nitrobenzoylhydrazone Ferrocenoylacetone And Synthesis On Its Basis, Zilola Abduraxmonovna Sulaymonova, Bako Bafayevich Umarov Doctor Chemical Science, Professor

Chemical Technology, Control and Management

β-diketone-ferrocenoylacetone was obtained by Claisen condensation. Meta-nitrobenzoylhydrazone of ferrocenoylacetone (H₂L) was synthesized by the interaction of meta-nitrobenzoic acid hydrazide with ferrocenoylacetone. On its basis, complexes with copper(II) and nickel(II) ions were synthesized. The obtained compounds were characterized by the methods of elemental analysis, IR-, ¹H NMR andelectronic spectroscopy. The research results showed that H₂L in solution exists in the form of a tautomeric mixture: hydrazone, α-hydroxyazine, and cyclic 5-hydroxypyrazoline forms. According to the results of IR and ¹H NMR spectra, the complexes were assigned a planar-square structure, and in them the doubly deprotonated …

Application Of Methods Of Intermittent Ventilation Of Industrial Premises Using A Digital Data Transmission System, Yuriy Shipulin, Abdullayev Temur, Jamolidin Usmanov, Shahnoza Ergasheva

Chemical Technology, Control and Management

The article is devoted to topical applied issues, the application of methods of intermittent ventilation of industrial buildings using a digital data transmission system. The requirements for the parameters of the environment are determined, which include: composition, purity, temperature, air humidity, the content of positive and negative ions, the presence of fields of various origins (thermal, optical, biological, gas, and electromagnetic). The authors of the article argue that some of the listed parameters can be supported by ventilation and air conditioning (SCA) systems.

It is shown that when the controlled parameters are limited to a multidimensional area, the SCA control …

Algorithms For Controlling The State Of Executive Mechanisms, Farkhod Kasimov, Mirkhalil Ismailov

Chemical Technology, Control and Management

When constructing automatic control systems, the main attention often is paid to determining the optimal parameters of system regulators than other elements that make up the system. The executive mechanisms also significantly affect the function quality of the control system. In this article, the actuators were considered as a sub-system within the control system and control algorithms with open and closed-loop communication relative to the actuators were investigated. To assess the real state of the actuators, and improved control structure with sensors installed on the moving parts has been developed. For this structure, an algorithm for evaluating and controlling the …

Artificial Neural Networks For Measuring The Moisture Of Bulk Materials, Erkin Uljaev, Shohrux Nurali O‘G‘Li Narzullayev

Chemical Technology, Control and Management

One of the urgent tasks of industrial production is improving the quality of verification of received, manufactured, and stored products, reducing energy consumption in the production of a final product. The solution to this problem is impossible without the creation of devices that control the quality indicators of materials within the limits of the permissible error. One of the most common indicators of the quality of bulk materials is moisture. In the national economy and industrial production, it is required to determine the moisture content of more than 500 different substances and materials. The paper shows the possibility of using …

Analysis Of Errors Of The Ultrasonic Level And Increasing The Accuracy Of Measuring The Level Of Liquid Materials In Non-Stationary Media, Azamat Alijonovich Yusupov

Chemical Technology, Control and Management

This article is devoted to the analysis of the total error of an ultrasonic level meter designed to measure the level of liquid materials in order to improve the accuracy of the measuring system in tanks. The components of the total error of the process of measuring transformation of the liquid level are determined and the analysis of the main characteristics is carried out, to reduce the random error of the measurement system, the task of ensuring the accuracy of measurement and control of the level using an ultrasonic level gauge is presented, by averaging the measurement results when calculating …

Formalization Of The Procedure For Choosing The Optimality Criterion And Formulation The Problem Of Ammonium Nitrate Production Control, Husan Zakirovich Igamberdiev, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

The article discusses the questions of formalization of the procedure for choosing an optimality criterion and setting the problem of controlling the production of ammonium nitrate. The analysis of the technical and economic features of the considered production is carried out. As a criterion for the efficient operation of ammonium nitrate production, such a technological indicator as specific technological costs for the main stages, determined by the interval of quasi-stationarity of the object, is used, i.e. the time of its stable work. To solve the control problem, it is proposed to use the decomposition of the control problem into a …

Socio-Technical Perspective For Electronic Tax Information System In Tanzania, Lucas Ngowi, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Socio-technical systems theory has rarely been used by system architects in setting up computing systems. However, the role of socio-technical concepts in computing, which is becoming social in nature, has made the concepts more relevant and commercial. Tax information systems are examples of such systems because they are influenced by external variables such as the political environment, technological trends, and social environment, introducing complexity in their deployment and determining the type of e-services and their delivery to a diverse group of people. It was observed that in Tanzania there is resistance, reluctance and minimal use of electronic tax system because …

Lyapunov Function-Based Stabilizing Control Scheme For Wireless Power Transfer Systems With Lcc Compensation Network, Abu Shahir Md Khalid Hasan

LSU Master's Theses

A stabilizing control scheme based on a Lyapunov function is proposed for wireless power transfer (or WPT) systems. A state-space model of the WPT system is developed and the Lyapunov function is formulated based on an energy equation of the system involving state variables. The internal resistance of a battery varies during charge and discharge. Therefore, if a WPT system is used to charge a battery, its output load will vary. Furthermore, the coupling coefficient between the transmitter (primary) and receiver (secondary) coils decreases when they are misaligned. Comparative case studies are conducted to verify the efficacy of the proposed …