Chemical Engineering Commons^™

Identifying Multiple Steady States In The Design Of Reactive Distillation Processes, Thomas Karl Mills

Doctoral Dissertations

"Global homotopy continuation is used to identify multiple steady states in ideal reactive flash and reactive distillation systems involving a reaction of the form A+B [symbol for <--> C taking place in the liquid phase. The choice of specifications has an influence on the existence of multiple solutions for both the flash and the column. For the flash, specification of the heat input or withdrawal can give rise to multiplicities while specification of the split fraction does not. Specification of one internal energy balance variable and one external material balance variable does not produce multiplicities in the column; however, specification of …

Enhanced Photorefractivity In A Polymeric Composite Photosensitized With Modified Carbon Nanotubes, Naveen Kumar Lingam

Masters Theses

"This work involves the photosensitization of photorefractive polymeric composites through the inclusion of multiwalled and singlewalled carbon nanotubes grafted to poly(N-vinyl carbazole). The photorefractive nature of the holograms gratings was established using two-beam-coupling, yielding two-beam-coupling gain coefficients approaching 80 cm⁻¹. Degenerate-four-wave-mixing experiments exhibited diffraction efficiencies as high as 60% as well as over-modulation voltages as low as ~ 40 V/µm. These notable figures of merit indicate that the grafting of the various carbon nanotubes to the poly(N-vinyl carbazole) polymer resulted in enhanced photorefractive performance. The mechanism responsible for this enhancement in photorefractive performance is investigated using a variety of experimental …

Electroless Deposition Of Superconducting Magnesium Diboride Thin Films On Various Substrates, Khrupa Saagar Vijayaragavan

Wayne State University Theses

ABSTRACT

ELECTROLESS DEPOSITION OF SUPERCONDUCTING MAGNESIUM DIBORIDE THIN FILMS ON VARIOUS SUBSTRATES

by

KHRUPA SAAGAR VIJAYARAGAVAN

MAY 2010

Advisor: Dr. Susil K Putatunda

Dr. Gavin Lawes

Major: Chemical Engineering

Degree: Masters of Science

Superconducting thin films of magnesium diboride were synthesized by a novel electroless plating process. Electroless plating shares many similarities to electroplating with the major difference being the absence of a continuous bias voltage. Significantly, this work represents the first investigation where electroless deposition has been used to prepare compounds, as opposed to the elemental metals considered in all previous studies. Magnesium Diboride is a recently discovered superconducting …

Molecular Modeling Of Energetic Materials And Chemical Warfare Agents, Nandhini Sokkalingam

Wayne State University Dissertations

Contamination of military sites by energetic materials and chemical warfare agents is a growing problem. To avoid health hazards associated with these compounds, it is necessary to decontaminate or remediate the contaminated sites. Effective decontamination requires knowledge of environmental fate of contaminants and the appropriate remediation methodologies. While the fate of chemical warfare agents are well studied, the impact of certain energetic materials in the environment is relatively unknown. So the current focus is determining environmental fate of Insensitive Munitions (IM) which are energetic materials that have low shock sensitivity and high thermal stability and developing detection schemes for identifying …

Electrostatic Quadrupole Plasma Mass Spectrometer Measurements During Thin Film Depositions Using Simultaneous Matrix Assisted Pulsed Laser Evaporation And Magnetron Sputtering, Chad N. Hunter, Michael H. Check, Christopher Muratore, Andrey A. Voevodin

Chemical and Materials Engineering Faculty Publications

A hybrid plasma deposition process, combining matrix assisted pulsed laser evaporation (MAPLE) of carbon nanopearls (CNPs) with magnetron sputtering of gold was investigated for growth of composite films, where 100 nm sized CNPs were encapsulated into a gold matrix. Composition and morphology of such composite films was characterized with x-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy (TEM) analysis. Carbondeposits on a gold magnetron sputter target and carbon impurities in the gold matrices of depositedfilms were observed while codepositing from gold and frozen toluene-CNP MAPLE targets in pure argon. Electrostatic quadrupole plasma analysis was used to determine that …

Development Of Wide Band Gap Semiconductor Materials For Renewable Energy, S.M. Sarif Masud

Open Access Theses & Dissertations

Several new wide band gap semiconductor nanocomposite photocatalytic materials have been synthesized from HTiNbO5 and HNb3O8 for solar energy conversion. As a source of renewable energy, the materials are being tested to produce hydrogen fuel from water via photolysis. The materials have high surface areas, are macroporous, and have flatband potentials suitable for reducing water to create hydrogen. Under visible or ultra violet light, the materials were found to be very promising as hydrogen evolving photocatalysts. As part of the synthesis of the composites, the catalysts also exhibited excellent catalytic activity under UV light for reducing ionic platinum and gold …

Enhanced Vacuum Drying Through Improved Solvent Recovery, Reduced Process Cycle Times And Prediction Of Drying Duration, Diana Patricia Mesa Delgado

Theses

Drying of pharmaceuticals and fine chemicals is often accomplished under vacuum conditions to enhance energy efficiency and to avoid overheating of thermo sensitive materials. This project aims to study vacuum drying operations to obtain a better understanding of this process so as to optimize drying performance. This project obtained industrial data collected from a range companies in Ireland.

Pharmaceutical companies started assessing processes and making changes to drying processes from 2004 onwards; these initiatives are due to economic pressures, environmental issues and the Process Analytical Technology (PAT) initiative launched by the FDA in 2004.

Vacuum drying has been used in …

Effect Of Fluorination On Partitioning Behavior And Bilayer Self Assembly, Vivian Aramide Ojogun

University of Kentucky Doctoral Dissertations

Fluorinated systems are defined by unique properties that offer advantages in drug delivery, material synthesis and industrial applications. In comparison to their hydrocarbon counterparts, the design of fluorinated solutes for tailored applications is limited by the inability to predict the effect of fluorination on phase behavior. This work examines and interprets the influence of fluorination on the phase behavior of fluorinated solutes and surfactants, with emphasis on their impact on vesicle bilayers.

Thermodynamic partitioning of functionalized series of fluorinated and hydrocarbon nicotinate prodrugs fashioned to promote solubility in a fluorocarbon solvent (perfluorooctyl bromide; PFOB) is measured. Predictive approaches are also …

Microalgae Harvesting By Flocculation With Polymer-Coated Magnetite Particles, Humayun Shariff

Masters Theses

"Although microalgae are considered to be one of the potentially significant feedstock for renewable biofuels, harvesting them efficiently from culture ponds has been a major hurdle. The conventional harvesting methods such as centrifugation and filtration are very time and labor intensive processes. Gravimetrical settlement with the aid of cationic flocculants is the most widely employed technique, but suffers from the difficulty in recovering microalgae floes. Furthermore, recycling of these flocculants after the harvesting process is not possible. Polymer-coated magnetite particles have been investigated for applications in various fields. This research has focused on the development of a novel and efficient …

Desulfurization And Tar Removal From Gasifier Effluents Using Mixed Rare Earth Oxides, Sumana Adusumilli

LSU Master's Theses

Biomass gasification is a promising source of fuels. However, hydrogen sulphide, tars and other by-products must be removed from the raw gas because they deactivate downstream reforming and water gas shift catalysts. The goal of this project is to find the best REO combination for simultaneous tar cracking and desulfurization of gasifier effluents and to find the sorbents that are stable at high operating temperatures of gasifiers. Simultaneous tar cracking and H2S removal from a simulated gasifier effluent was tested using different rare earth mixed oxide (REO) catalysts/sorbents based on Ce/LaOx, Ce/La/MOx and Ce/La/M2Ox/Al2O3 where M is a transition metal …

Surfactant-Induced Flow Behavior Effects In Gas Condensate Reservoirs, Bikash Deep. Saikia

LSU Master's Theses

Natural gas, which accounts for a quarter of world’s energy, has been a major energy source because of its abundance and less impact on environment. With explorations at higher depth, pressure and temperature, the share of gas condensate reservoirs to global gas production is increasing. A unique production challenge associated with these reservoirs is the condensate blockage problem, which is the buildup of condensate liquid saturation around wellbore as a result of drawdown below dew point pressure. Mitigation of this problem requires in depth understanding of the multiphase flow of liquid and gas. Surfactants are well known in the literature …

Experimental Study On Single Cement Fracture Exposed To Co2 Saturated Brine Under Dynamic Conditions, Tevfik Yalcinkaya

LSU Master's Theses

Carbon capture and storage is one of the technologies that could help reduce CO2 concentration in the atmosphere while contributing to cutback of Greenhouse Gas emissions. Depleted oil and gas fields are favorable targets for CO2 storage because existing wells can be readily used as injection wells. However, a number of abandoned wells also serve as gateway to the reservoir which should be considered in the context of effective Carbon capture and storage. Wellbore cement is a very essential element in wellbore systems that serve as a barrier between different zones in the subsurface. The fractures inside wellbore cement sheath, …

An Experimental Study Of Surfactant Enhanced Waterflooding, Paulina Metili Mwangi

LSU Master's Theses

Surfactants have a variety of applications in the petroleum industry due to their remarkable ability to lower the oil-water interfacial tension and alter wettability. However, surfactant adsorption on rock surfaces has severely crippled this means of improving oil recovery due to the high cost associated with the large quantities of surfactant needed. A previous experimental study by Ayirala (2002) reported the development of mixed wettability using a nonionic surfactant. At this mixed-wet state he was able to recover about 94% of the original oil in place. The underlying motivation of this study was to achieve such high recoveries without using …

Designing A Whey Protein Based Material As A Scaffold For Bone Regeneration, Mia Dvora

LSU Doctoral Dissertations

A novel gel material was designed and optimized for use as a bone tissue regeneration scaffold. Whey protein isolate (WPI), the primary component of the material, underwent considerable testing for conformity to a set of known material characteristics required for application in bone regeneration. WPI gels of different compositions were fabricated by thermally inducing gelation of high-concentration protein suspensions, and characterized for compressive strength and modulus, hydration swelling and drying properties, mechanical behavior change due to polysaccharide additives, and intrinsic pore network structure. The gels were also tested for their compatibility with MC3T3-E1 cells, and interactions such as cell adhesion, …

Integrating Bioprocesses Into Industrial Complexes For Sustainable Development, Debalina Sengupta

LSU Doctoral Dissertations

The objective of this research is to propose, develop and demonstrate a methodology for the optimal integration of bioprocesses in an existing chemical production complex. Chemical complex optimization is determining the optimal configuration of chemical plants in a superstructure of possible plants based on economic, environmental and sustainable criteria objective function (triple bottomline) and solves a mixed integer non linear programming problem. This research demonstrated the transition of production of chemicals from non-renewable to renewable feedstock. A conceptual design of biochemical processes was converted to five industrial scale designs in Aspen HYSYS® process simulator. Fourteen input-output block models were created …

Characterization Of Poly(Methyl Methacrylate Based Nanocomposites Enhanced With Carbon Nanotubes, Andrew Jonathan Placido

University of Kentucky Master's Theses

The viscoelastic relaxation dynamics of a series of poly(methyl methacrylate) [PMMA] based nanocomposites filled with carbon nanotubes have been studied using dynamic mechanical analysis and broadband dielectric spectroscopy. The networks were prepared using four methods: (i) melt mixing, (ii) solution processing, (iii) in-situ polymerization, and (iv) polymer grafting. Nanotube modifications included surface oxidation via acid exposure and surface functionalization for polymer grafting. The effect of variations in processing method and nanotube modification on glass transition temperature (T_g) and relaxation dynamics was investigated. The relaxation behavior of the nanocomposites was sensitive to processing method and nanotube functionalization. Nanotube loading …

Electrodeposited Cu-Based Catalysts For Alcohols From Co Hydrogenation And Electrodeposition Of Cuniw/Cuni Multilayered Alloys, Mayank Gupta

LSU Doctoral Dissertations

Ethanol and higher alcohols can be used as a fuel or fuel additive in gasoline engines as well as a hydrogen carrier. One of the promising methods to synthesize these alcohols is based on thermochemical conversion of CO and H2 (CO hydrogenation). Conventional catalysts used for the conversion CO and H2 (syngas) to ethanol typically give yields less than 20% with the balance resulting mostly in the formation of the thermodynamically favored products CH4 and CO2. New catalysts with compositions designed to kinetically favor the formation of ethanol and higher alcohols are needed. Electrodeposition of nanowires offers a means to …

A Simulation Study Of Factors That Affect Pressure Control During Kick Circulation In Managed Pressure Drilling Operations, Jose Eduardo Eduardo Chirinos

LSU Master's Theses

An university-industry consortium has been studying alternative well control procedures to be used for kicks taken during managed pressure drilling (MPD) operations using the constant bottom hole pressure (CBHP) method. The CBHP method of MPD allows more precise control of wellbore pressure than conventional drilling. MPD surface equipment allows more alternatives for controlling a kick and may support faster detection of kicks and losses which can reduce the severity of a well control event. Nevertheless, the elimination of well control incidents cannot be guaranteed, and the uncertainty in downhole drilling margins are not reduced by adopting MPD methods. The primary …

X-Ray Absorption Spectroscopy Applied To Mixed-Metal Iron-Based Fischer-Tropsch Catalysts, Andrew Allen Campos

LSU Doctoral Dissertations

Synthetic fuels derived from methane, coal or biomass are essential in addressing future transportation fuel demands which are expected to exceed petroleum-derived capacities. The Fischer-Tropsch synthesis (FTS) is the most studied technique for the conversion of coal or biomass-derived syngas into transportation fuels. Fe-based catalysts are typically used for the FTS of biomass and/or coal-derived syngas due to: the relatively low cost of iron, water-gas shift activity, and low methane selectivity at industrial FTS conditions. Fe/Cu/SiO2 Fischer-Tropsch catalysts promoted with Cr, Mn, Mo, W, or Zr were studied in-situ, using Fe K-edge TPR XANES (temperature programmed reduction X-ray absorption near-edge …

Modeling And Multiresolution Characterization Of Micro/Nano Surface For Novel Tailored Nanostructures, Rajib Mukherjee

LSU Doctoral Dissertations

Nanofabrication is state of the art technology. Various chemical, mechanical, biochemical and semiconductor products have characteristics controlled by the nanostructures of the surface and interphase. Surface microscopic imaging is generally used to capture different surface features. By properly analyzing the surface image, valuable information regarding manufacturing process and product performance can be extracted. While microscopy measurements can offer very accurate qualitative information about surface features, for many applications, it is critical to obtain a quantitative description of the surface morphology. Various statistical features can be used to characterize the surface in quantitative way. Such an analysis can be done by …