Chemical Engineering Commons^™

Materials Education And Research In Art And Design: A New Role For Libraries (Program Booklet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Website), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Collection Creation And Administration: A New Role For Libraries (White Paper), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

The Problem/Opportunity: To define, identify, and guide design-based materials collections in academic settings and foster community among those with existing collections and/or those considering creating and supporting one.

Contents and topics:

1. What is a materials collection?
2. Why have a materials collection?
3. Acquisition strategies
4. Organizational approaches
5. Programming possibilities
6. Symposium summary
7. Resources

Poly(N-Isopropylacrylamide)-Based Scaffolds For Tissue Engineering Applications, Pamela Kubinski

Theses and Dissertations

The primary goal of this work is to investigate the potential of poly(Nisopropylacrylamide)- based scaffolds in tissue engineering applications, specifically spinal injury and nucleus pulposus replacement. Poly(N-isopropylacrylamide), denoted PNIPAAm, is a synthetic polymer with hydrophilic properties at room temperature, but above 32C the chains become hydrophobic and entangle to form physical crosslinks. This thermoresponsive property enables PNIPAAm to be implanted as a free-flowing solution at room temperature and collapse into a gel in physiological conditions. However, as a homopolymer, the hydrophobicity of PNIPAAm in vivo causes the hydrogel to expel water and exhibit inelastic properties that do not mimic those …

Ramjet Combustion Chamber, Paul Cameron Stone

Aerospace Engineering

A ramjet combustion chamber is designed and some initial assembly fabrication and test completed as a component of a ramjet graduate project for California Polytechnic State University, San Luis Obispo Supersonic Wind Tunnel. The combustor design is driven by a theoretical model created by a Cal Poly graduate student, Harrison Sykes. Temperature, pressure, and fuel flow will be measured.

Development Of A High Precision Quantum Dot Synthysis Method Utilizing A Microfluidic Reactor And In-Line Fluorescence Cell, Harry Lafferty, Jonny Hoadley

Materials Engineering

Quantum dots show great potential for use as spectral converters in solar cells, lighting applications and biological imaging. These applications require precise control of quantum dot size to maximize performance. The fluorescence profile of quantum dots in solution correlates directly with particle size. An alternative, high precision process was developed for the synthesis of cadmium-selenide quantum dots using a microfluidic reactor and fluorescence flow through cell. The process required creating separate cadmium and selenium precursors that were then mixed in a nitrogen environment at 17± 1°C. Using an NE-300^® syringe pump, the solution was pumped through a microfluidic reactor …

Advanced Deepwater Monitoring System, David Brower, John Hedengren, Reza Asgharzadeh Shishavan, Alexis Brower

Faculty Publications

This study investigates new methods to improve deepwater monitoring and addresses installation of advanced sensors on ”already deployed” risers, flowlines, trees, and other deepwater devices. A major shortcoming of post installed monitoring systems in subsea is poor coupling between the sensor and structure. This study provided methods to overcome this problem. Both field testing in subsea environments and laboratory testing were performed. Test articles included actual flowline pipe and steel catenary risers up to twenty-four inches in diameter. A monitoring device resulting from this study can be installed in-situ on underwater structures and could enhance productivity and improve safety of …

Utilization Of Wet Corn Distillers Grain For The Production Of Cellulase Enzymes And Value Added Products, Hunter R. Flodman

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Distillers grain, a byproduct from the dry grind corn ethanol industry, is an industrially available, abundant, preprocessed material comprised primarily of cellulose, hemicellulose, protein, oil, and minerals. This research investigated the utilization of distillers grain as a substrate for solid-state fermentation (SSF). SSF is the growth of microorganisms on a moist, solid substrate in the absence of free water. The substrate acts as both the nutrient source and as a solid support for the microorganisms, typically filamentous fungi. SSF has the unique ability to convert agricultural byproducts into valuable bioproducts such as enzymes and organic acids without hydrolyzing polysaccharides to …

Characterisation Of Ga2o3-Na2o-Cao-Zno- Sio2 Bioactive Glasses, A. W. Wren, T. Keenan, A. Coughlan, F. R. Laffir, D. Boyd, Mark R. Towler, M. M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

The structural role of Gallium (Ga) is investigated when substituted for Zinc (Zn) in a 0.42SiO₂-0.40-xZnO-0.10Na₂O-0.08CaO glass series, (where x = 0.08). Each starting material was amorphous, and the network connectivity (NC) was calculated assuming Ga acts as both a network modifier (1.23), and also as a network former. Assuming a network forming role for Ga the NC increased with increasing Ga concentration throughout the glass series (Control 1.23, TGa-1 2.32 and TGa-2 3.00). X-ray photoelectron spectroscopy confirmed both composition and correlated NC predictions. Raman spectroscopy was employed to investigate Q-structure and found that a shift …

Enzymatic Production Of Biodiesel From Fats Extracted From Lamb Meat Using Supercritical Co2, Hanifa Easa Taher

Theses

Due to the reduction in fossil fuel reserves and associated environmental impacts from using petroleum fuels, biodiesel has been presented as a feasible alternative because it is sustainable and environmentally friendly. In this study, it is proposed to investigate the feasibility of enzymatic production of biodiesel from waste animal fats using supercritical fluid technology for the extraction and reaction. The operating conditions that resulted in the optimum extraction and biodiesel production yield were identified. To the best of my knowledge of the investigators, the waste animal fat extracted by supercritical CO₂ (SC-CO₂) for the production of biodiesel …

The Effect Of Nanoclays On The Properties Of Aspirin Modified Enteric Polymer Prepared By Hot-Melt Mixing, Nonjaros Chomcharn

Dissertations

Melt mixing in batch equipment or continuous extruders is a technique that recently gained the attention of the pharmaceutical industry. This dissertation investigates two controlled-release drug delivery systems. The first system, namely the enteric matrix, contains an active pharmaceutical ingredient (API) and plasticizer in an enteric polymer while in the second system a nanoclay is added to the enteric matrix, to produce a polymer nanocomposite. The first system employs hot-melt mixing to prepare a modified enteric matrix, as a delayed-release dosage form. Different concentrations of aspirin (ASP) ranging from 10 – 30% w/w are melt-mixed with a plasticized Eudragit® …

Reaction Mechanisms Of Hydrocarbon And Mercury Systems In The Atmosphere And In Combustion: A Theoretical Study Of Thermochemical And Kinetic Properties, Itsaso Auzmendi Murua

Dissertations

The continuing increase in the world population and the rapidly changing lifestyle and education of this population projects significant increases in energy requirements. Global warming is a worldwide major concern with a very serious potential stress on our climate threatening major changes to the environment. It is, without question, of major importance to improve the efficiency and optimize the current available combustion processes and fuel sources, to develop alternative fuels and to reduce the emissions of toxic pollutants.

The objective of this dissertation is to present thermochemical, kinetic and modeling results on two reference fuels (the land vehicle fuel isooctane …

Metal Based Reactive Nanocomposites Prepared By Cryomilling, Shasha Zhang

Dissertations

Aluminum is one of the most commonly used metal fuel additives for propellants, explosives, and pyrotechnics. Recent interest has been focused on replacements for aluminum as fuel additives to achieve higher combustion temperatures and stronger pressure pulses for applications in advanced munitions systems. Two applications are addressed in this work. In the applications for explosives designed to defeat stockpiles of chemical and biological weapons, it is of interest to develop multifunctional materials combining the high energy density of metal fuels with the biocidal activity of halogens. A challenge of this effort is to design and prepare powder-like Al-I2 materials which …

Methane Partial Oxidation Over Phthalocyanine Catalyst, Yuan Zhu

Theses

The partial oxidation reaction of methane over a zeolite-supported ruthenium phthalocyanine catalyst is studied in a packed bed reactor. The investigation of such reaction is desirable because partial oxidation of methane yields a synthesis gas that can be upgraded to liquid chemicals and fuels.

Reactants of this study are He-diluted CH₄ and O₂. The effluent includes unreacted CH₄ and O₂, He, CO, CO₂, H₂, and H₂O vapor. Thermal conductivity gas chromatography is applied to identify the mole fractions of reactants and products. System pressure is maintained at 50 …

Production Of Stable Bcs Class Ii Drug Suspensions By Melt Emulsification And Subsequent Incorporation Into Polymer Strip Films, Emanuel Joseph Vizzotti

Theses

One of the ways to improve the dissolution rate of poorly water-soluble drugs is to produce fine drug particles with increased surface area. This increase will lead to bioavailability enhancement. However, smaller drug particles are thermodynamically unstable and tend to aggregate or grow. Therefore, proper formulation and process parameters must be chosen to keep the particles small. In this study, fine drug particles of two model drugs, fenofibrate and ibuprofen, are prepared by the melt emulsification technique. The influence of suspension formulation (i.e., the inclusion of polymers and surface-active agents) on particle stability is investigated. Moreover, different agitation techniques during …

Hollow Fiber Membrane-Based Air Gap Membrane Distillation, Xuan Wang

Theses

Membrane Distillation (MD) is a thermally-driven separation process. In this research, desalination of 1 % NaCl solution is achieved by one type of MD namely, Air Gap Membrane Distillation (AGMD). The characteristics of AGMD are evaluated by using a hollow-fiber-set-based compact device. Hot brine solution and cold water are passed through two different fiber sets separately: porous hydrophobic polyvinylidene fluoride hollow fibers of the E type (PVDF E) and solid polypropylene (PP) hollow fibers. Vapor from the hot brine crosses the membrane pores of the PVDF fibers and the air gap, and finally condenses over the surface of solid hollow …

Batch Foaming Of Hot Melt Extruded Excipient/Disintegrant/Api Pharmaceutical Formulations And The Study Of The Effects Of The Resulting Cellular Structures On Api Dissolution, Na Yao

Theses

This thesis focuses on the impact of a disintegrant included in a foamed immediate release system composed of a polymer excipient and an Active Pharmaceutical Ingredient (API). Indomethacin (INM) is used as model API; Eudragit® EPO (EPO) is used as polymer excipient; AcDiSol and Crospovidone (Cros) are used as two kinds of disintegrant. The main objectives are to gain an understanding of the resulting morphologies, as well as the impact of disintegrants on drug release from foamed polymeric matrices.

In the first part of this research, the Hot Melt Extrusion (HME) process is used to compound the following pharmaceutical formulations: …

Heterogeneous Combustion Of Condensed Particles In Transition Regime, Deniz Yildiz

Theses

A steady-state model of heterogeneous combustion for a spherical particle is developed accounting for the transition regime of heat and mass transfer. The model assumes formation of condensed products and reaction rate controlled by the transport of oxidizer to the particle surface. The model is based on the Fuchs’ limiting sphere approach. Calculations are performed for combustion of zirconium particles of different sizes. Temperature and oxygen concentration profiles are calculated and compared to those predicted by the continuous medium transfer model. It is shown that for particles in the range from 100 nm up to 30 gm heat and mass …

Effect Of Tablet Compression On The Dissolution Of Aspirin Tablets Using A Novel Off-Center Paddle Impeller (Opi) Dissolution Testing System, Chuan Sun

Theses

In the pharmaceutical industry, dissolution testing is routinely carried out to determine the dissolution rate of oral solid dosage forms. Among several testing devices, the USP Dissolution Apparatus 2 is the device most commonly used. However, despite its widespread use, this apparatus has been shown to produce test failures and to be very sensitive to a number of small geometry changes.

The objective of this study was to determine whether a novel dissolution system termed “OPI” for “off-center paddle impeller” was sensitive enough to determine differences in tablet dissolution profiles caused by different compression pressure during the tablet manufacturing process. …

Hydrodynamic Effects Of A Cannula In A Usp Dissolution Testing Apparatus 2, Qianqian Liu

Theses

Dissolution testing is routinely used in the pharmaceutical industry to provide in vitro drug release information for drug development and quality control purposes. The USP Testing Apparatus 2 is the most common dissolution testing system for solid dosage forms. Usually, sampling cannulas are used to take samples manually from the dissolution medium. However, the inserted cannula can alter the normal fluid flow within the vessel and produce different dissolution testing results.

The hydrodynamic effects introduced by a permanently inserted cannula in a USP Dissolution Testing Apparatus 2 were evaluated by two approaches. Firstly, the dissolution tests were conducted with two …