Machine Learning Model For Detecting Masked Hypertension In Young Adults,
2025
Wake Forest University
Machine Learning Model For Detecting Masked Hypertension In Young Adults, Brendyn Miller, Samuel Coeyman, Annemarie Wentzel, Carina M.C. Mels, William J. Richardson
Chemical Engineering Faculty Publications and Presentations
Introduction Cardiovascular disease (CVD) remains the leading global cause of mortality, with hypertension (HT) being a significant contributor, responsible for 56% of CVD-related deaths. Masked hypertension (MHT), a condition where patients exhibit normotensive blood pressure (BP) in clinical settings but elevated BP in out-of-clinic measurements, poses an elevated risk for cardiovascular complications and often goes undiagnosed. Current diagnostic methods, such as ambulatory BP monitoring (ABPM) and home BP monitoring (HBPM), have limitations in feasibility and accessibility. Methods This study aimed to address these challenges by leveraging machine learning (ML) models to predict MHT based on clinical data from a single …
Investigation Of Electrochemical Corrosion Fatigue Mitigation Strategies For Mild Carbon Steel,
2025
Louisiana Tech University
Investigation Of Electrochemical Corrosion Fatigue Mitigation Strategies For Mild Carbon Steel, Joel Andrew Hudson
Doctoral Dissertations
Corrosion fatigue remains a critical durability challenge for steels used in boiler tubes and other safety-critical components, where the interaction of cyclic stresses and corrosive environments accelerates material degradation. This dissertation comprises three experimental studies aimed at advancing mitigation strategies and test methodologies: (1) enhancing corrosion resistance through electrodeposited Fe-Ni anodic coatings, (2) inducing synthetic crack closure to suppress fatigue crack growth, and (3) developing an accessible, low-cost, automated testing system to investigate environmentally assisted cracking (EAC) under controlled laboratory conditions. The first study examined the corrosion behavior of Fe and Fe-Ni electrodeposits synthesized from sulfate-based baths and applied to …
Njit Stem For Success Report,
2025
New Jersey Institute of Technology
Njit Stem For Success Report, Riya R. Kapadia
STEM Month
Airborne viruses are the leading causes of disease and even death in public settings. For instance, the COVID-19 pandemic has resulted in 768 million cases. Air filters improve air quality and remove airborne pathogens that detrimentally affect health. However, current antiviral air filters such as HEPA filters and face masks are impractical for hospital and public settings. Electrically conductive air filters are favorable for antiviral air purification, as they are inexpensive and energy-efficient. Among electrically conductive air filters, laser-induced graphene-based electrified air filters are a promising technology, but they require a voltage greater than 20 V to inactivate the virus. …
Enhancing The Energy Efficiency Of Co2-Rich Amine Solution Regeneration Through Innovative Catalyst And Advanced Membrane Module System,
2025
United Arab Emirates University
Enhancing The Energy Efficiency Of Co2-Rich Amine Solution Regeneration Through Innovative Catalyst And Advanced Membrane Module System, Muhammad Waseem
Thesis/ Dissertation Defenses
Global warming, which is mostly caused by greenhouse gas emissions, is rapidly becoming a serious issue. Prospective technology for capturing CO2 from point source pollution has recently received a lot of interest. Carbon capture and storage (CCS), particularly through amine-based absorption methods, is one of the most developed industrial processes for capturing anthropogenic and natural CO2. Although amine-based absorption remains the most mature technology for industrial CO2 capture, yet its largescale deployment is hindered by the high energy requirement of solvent regeneration. To address this challenge, we explored both catalytic and membrane-assisted approaches to improve the efficiency of CO2 desorption …
Novel Electroactive Polymer Actuators Using All-Polyelectrolyte Poly(Ionic Liquid) Ionogels,
2025
University of Arkansas, Fayetteville
Novel Electroactive Polymer Actuators Using All-Polyelectrolyte Poly(Ionic Liquid) Ionogels, Kayla Foley, Iwei Chu, Keisha B. Walters
Chemical Engineering Faculty Publications and Presentations
Poly(ionic liquid)-based ionogels are excellent all-poly(electrolyte) candidates for electroactive actuation applications, but investigation of their actuation behavior and ionogel properties has largely been limited to styrenic block copolymers. In this work, ionogels were prepared from a novel poly(ionic liquid) (PIL) block copolymer, poly[(2-dimethyl amino) ethyl methacrylate)]-block-poly[4-vinylbenzyl-3-butyl imidazolium bis(trifluoromethylsulfonyl)imide] (PDMAEMA-b-PVBBImTf(2)N) combined with an ionic liquid, 1-butyl-3-methyl imidazolium tetrafluoroborate (C(4)C(1)ImBF(4)), at weight percentages between 0 to 40 wt%. Under a low applied voltage (4 V DC) microscale actuation was achieved for films prepared from the neat PDMAEMA-b-PVBBImTf(2)N block copolymer, as well as its corresponding 10 wt% ionogel; this result critically expands the …
Elucidating The Effects Of Water Activity On The Hydration Kinetics And Thermodynamics Of Ye’Elimite–Calcium Sulfate Hydrate Systems,
2025
Missouri University of Science and Technology
Elucidating The Effects Of Water Activity On The Hydration Kinetics And Thermodynamics Of Ye’Elimite–Calcium Sulfate Hydrate Systems, Godwin I. Ogbuehi, Rupack R. Halder, Aditya Kumar, Gaurav Sant, Monday U. Okoronkwo
Materials Science and Engineering Faculty Research & Creative Works
Relative humidity and water activity (aH) reductions have been known to suppress the hydration of anhydrous cement clinker phases. However, the relationship between ye'elimite (C4A3$) hydration kinetics and water activity remain unclear. This study employs experimental and thermodynamic modeling approaches to investigate the influence of water activity on ye'elimite hydration in the "C4A3$ + water", and "C4A3$ + gypsum + water" systems. Experimental findings indicate that as water activity decreases, C4A3$ hydration diminishes until the reaction is brought to a halt at a threshold aH. The critical aHand corresponding solubility constant of C4A3$ (KC4A3S¯) estimated from thermodynamic analysis are 0.46 …
The Science And Economics Of 3d-Printed Filament Recycling,
2025
Embry-Riddle Aeronautical University
The Science And Economics Of 3d-Printed Filament Recycling, Michael Domingo, Dane Freund, John Mcswiggin, Adam Meadows
Sustainability Conference
In recent years, 3D printing has grown rapidly, both in homes and commercially. This has led to increased demand for plastic filaments, many of which contribute to plastic waste. This project explores the potential of recycling household plastics into 3D printing filament, promoting sustainability and creating a circular economy. Materials like PLA, PETG, ABS, and polypropylene can be recycled or even composted. Existing research has shown that recycled filaments can maintain comparable tensile strength to their virgin counterparts, depending on the recycling process. Furthermore, implementing circular economy practices for plastics could save billions annually by mitigating pollution and reducing landfill …
Scientific Characterization Of Historic Mortars Dating From The 15th-Century Of A Historical Building In Algeria: A Case Study,
2025
University of Science and Technology Houari Boumedienne, USTHB, Algiers, Algeria
Scientific Characterization Of Historic Mortars Dating From The 15th-Century Of A Historical Building In Algeria: A Case Study, M. E. Belgacem, N. Rabahi-Touloum, R. Neves, Y. Ouldkhaoua
Journal of Sustainable Construction Materials and Technologies
This research investigates the historic mortars (Aggregate/Binder (A/B) ratio) of a historical patrimony building, dating from the 15th century, in Algeria, for restoration purposes. It is well known that thorough characterization is essential for successful restoration. To this end, several techniques, including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and X-ray Fluorescence (XRF), optical microscope were used to characterize the historic mortars. A mechanical test was used to characterize the compressive strength of a historic mortar. For a comprehensive characterization, A/B ratios were estimated using both Digital Image Analyses (DIA) and chemical analyses. The results obtained provided clear information on …
A Comprehensive Overview Of Chronic Wound Infections And Current Treatment Methods,
2025
Missouri University of Science and Technology
A Comprehensive Overview Of Chronic Wound Infections And Current Treatment Methods, Sarah Fakher, David J. Westenberg
Biological Sciences Faculty Research & Creative Works
Chronic wound infections pose significant healthcare challenges due to persistent biofilms, antibiotic resistance, and impaired healing pathways. These wounds are characterized by prolonged inflammation, microbial colonization, and disrupted tissue regeneration, leading to substantial morbidity and healthcare costs. This article reviews current knowledge on chronic wound types, their pathophysiology, and the mechanisms underlying biofilm formation to examine the latest advancements in antimicrobial-based strategies aimed at addressing these challenges. It highlights how diverse materials and technologies have been engineered to improve infection management, enhance tissue regeneration, and overcome the limitations of traditional treatments as well as advances that leverage innovations such as …
Enhanced The Simultaneous Recovery/Extraction Of Combined Heavy Metals Of Lead And Vanadium From Synthetic Wastewater Using An Emulsion Liquid Membrane (Elm) With Nanoparticles And Ionic Liquid,
2025
Missouri University of Science and Technology
Enhanced The Simultaneous Recovery/Extraction Of Combined Heavy Metals Of Lead And Vanadium From Synthetic Wastewater Using An Emulsion Liquid Membrane (Elm) With Nanoparticles And Ionic Liquid, Qusay Al-Obaidi, Nora Yehia Selem, Oumaima Karai, Kaoutar Benabderazak, Muthanna H. Al-Dahhan
Chemical and Biochemical Engineering Faculty Research & Creative Works
Recovery/extracting of a combination of lead (Pb(II)) and vanadium (V(V)) ions from wastewater has been enhanced by an emulsion liquid membrane with the presence of magnesium oxide (MgO) or aluminum oxide (Al2O3) nanoparticles (20–50 nm size range) in the internal/stripping phase (W1) and ionic liquid ([OMIM] PF6) in the organic/oil phase (O). The study found that the recovery/extraction batch time was shortened, enhancing emulsion extraction efficiency and stability. Furthermore, the study outcomes extend the ELM separation techniques to industrial-scale pollutant recovery/extraction applications, especially heavy metal ions, from industrial effluent. The percentage of Pb(II) recovery/extraction was increased …
Few-Layered Conductive Graphene Foams For Electrical Transdifferentiation Of Mesenchymal Stem Cells Into Schwann Cell-Like Phenotypes,
2025
Cleveland State University
Few-Layered Conductive Graphene Foams For Electrical Transdifferentiation Of Mesenchymal Stem Cells Into Schwann Cell-Like Phenotypes, Ekin G. Simsar, Peifu Cheng, Tugce Dogruel, Maxsam Donta, Juhyung Jung, Naomi A. Asante, Donald S. Sakaguchi, Surya K. Mallapragada, Piran R. Kidambi, Metin Uz
Chemical & Biomedical Engineering Faculty Publications
This study investigates the potential of few-layered conductive graphene foams as 3D platforms for the electrical transdifferentiation of mesenchymal stem cells (MSCs) into Schwann cell (SC)-like phenotypes for peripheral nerve injury (PNI) treatment. The 3D graphene foams (3D-GF) are cytocompatible with MSCs and created a favorable microenvironment for the cells to attach, grow, proliferate, and transdifferentiate. We demonstrated that MSCs cultured within 3D-GF can be transdifferentiated into SC-like phenotypes using the synergistic effects of electrical stimulation and 3D porous and conductive structure. Our immunocytochemistry and gene expression analyses showed the expression of Schwann cell markers and enhanced secretion of growth …
Analysis Of Modern Research In The Field Of Automation And Digitalization Of The Dairy Industry,
2025
Doctor of Technical Sciences,Head of the Department of Computer Engineering and Digital Technologies, Kokand University, Andijan Branch. ORCID: [0000-0002-9825-8434]. E-mail: [email protected];
Analysis Of Modern Research In The Field Of Automation And Digitalization Of The Dairy Industry, N.A Kabulov, U.K. Sabirov, A.K. Oqilov
Chemical Technology, Control and Management
This article presents a systematic analysis of modern research aimed at the advancement of automation and digitalization technologies in the dairy industry, with particular emphasis on the processes of product sorting and quality control. The main directions of digital solution implementation are examined, including the use of robotic sorting lines, computer vision systems, spectral analysis sensors, and artificial intelligence tools for the automatic verification of product compliance with established standards. A comparative analysis of existing approaches to the implementation of intelligent control systems within the technological cycle — from raw material intake to packaging and finished product logistics — is …
Physicochemical Analysis Of Carbon-Containing Materials Obtained From Vulcanized Rubber Waste And Their Application As Filler Pigments,
2025
Navoi State University of Mining and Technology. Navoi city, Republic of Uzbekistan;
Physicochemical Analysis Of Carbon-Containing Materials Obtained From Vulcanized Rubber Waste And Their Application As Filler Pigments, N.S. Baxranova, Sh.T. Jurayev, D.R. Muminova, Jurayev Shohruh Tulqinovich
Chemical Technology, Control and Management
The article presents the results of chemical and scanning electron microscopic analyses of the solid fraction of carbon-containing materials obtained through thermo-oxidative pyrolysis of vulcanized rubber waste. Elemental analysis of the solid product formed during high-temperature pyrolysis of rubber-technical products at 650–700 °C is provided. In addition, the potential use of the carbonaceous material as a pigment is examined. Raman spectroscopic analysis of worn automobile tires showed that their composition consists of approximately 80 wt.% C, 7 wt.% H, 0.4 wt.% N, 1.5 wt.% S, 3 wt.% O, and 8 wt.% inorganic substances.
Modern Significance And Development Trends In The Production Of Vegetable Oils,
2025
Tashkent State Technical University. Address: 2 Universitet st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: [email protected], Phone: +99897-430-13-76.
Modern Significance And Development Trends In The Production Of Vegetable Oils, Umidjon Ruziev, F.O. Qosimov, M.K. Shodiev
Chemical Technology, Control and Management
This article provides a comprehensive analytical review of the current state of the global vegetable oil production market. It describes the diversity of raw materials supplied, which includes both traditional and emerging fat sources. The paper also describes the technological stages of production, emphasizing modern innovations that contribute to more efficient, high-quality, and safe production. The article also covers global trends by comparing production dynamics between countries, highlighting regions with the highest rates of production growth and explaining the reasons for their competitive advantages. Particular attention is paid to environmental and socio-economic aspects, including sustainable land use, certification, carbon footprint, …
Algorithms For The Synthesis Of A Temperature Control System For The Inner Tube Heat Exchanger With A Steam Jacket,
2025
Tashkent state technical university, Tashkent, Uzbekistan. Address: str. University-2, 100095 Tashkent city, Republic of Uzbekistan;
Algorithms For The Synthesis Of A Temperature Control System For The Inner Tube Heat Exchanger With A Steam Jacket, H.Z. Igamberdiyev, Jasur Sevinov, U.F. Mamirov, Sh.M. Abdishukurov
Chemical Technology, Control and Management
The synthesis of a feedback propagation control law for an inner tube heat exchanger with a steam jacket is addressed in this text. A controller has been developed that, based on temperature measurements taken at four points. The maintains the output temperature at a specified level by acting on the steam jacket temperature. To determine the parameters of the plant, a linear quadratic optimal (LQ-optimal) algorithm is employed. In the considered case, the optimal controller includes a proportional–integral (PI) component, as well as an additional term that requires storing the control input over the current interval for its computation. The …
Development Of Fire Prediction And Prevention Digital System Algorithms,
2025
Tashkent state agrarian university, Tashkent, Uzbekistan. E-mail: [email protected].
Development Of Fire Prediction And Prevention Digital System Algorithms, Oybek Zokirovich Koraboshev
Chemical Technology, Control and Management
This research work is devoted to the development of algorithms for a digital system aimed at early detection, prediction and prevention of fire hazards. In the work, the process of fire hazard assessment is modeled on the basis of modern information technologies and artificial intelligence tools. The main focus is on collecting data in real time, analyzing it and creating algorithms that determine the level of danger. In the process of research, methods of data cleaning, normalization and determination of correlation between variables were used to process multidimensional data streams obtained from various sensors (temperature, smoke, gas concentration and humidity …
Investigation Of The Fuel Combustion Process In Gas-Fired Furnaces For Automation Systems,
2025
Tashkent State Technical University. Address: 2 Universitet st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: [email protected];
Investigation Of The Fuel Combustion Process In Gas-Fired Furnaces For Automation Systems, N.R. Yusupbekov, Sh.M. Gulyamov, A.T. Rajabov, U.U. Kholmanov
Chemical Technology, Control and Management
The regularities of the combustion process of gaseous fuel in chamber furnaces are described. This process represents a homogeneous reaction in which there is no distinct boundary surface between the fuel and the oxidizer. It is shown that the latter either mix and then burn subsequently, or both processes occur simultaneously, corresponding respectively to kinetic and diffusion combustion. The structure of a turbulent-diffusion flame of gaseous fuel combustion is presented.
Analysis Of A Cloud-Based Robot Motion Planning System,
2025
Azerbaijan State Oil and Industry University. Address: Azadliq Avenue 34, AZ1010, Baku, Azerbaijan. E-mail: [email protected].
Analysis Of A Cloud-Based Robot Motion Planning System, Yusif Mardanzade, Latafat Abbas Gardashova
Chemical Technology, Control and Management
As a result of the integration of cloud computing technologies into the field of robotics, the concept of "cloud robotics" has emerged. Unlike traditional robots, cloud-based robot systems remove computation, memory, and even some software from the local device and rely on remote resources obtained over the network. This approach ensures that robots are not limited only by their internal computing capabilities and allows them to take advantage of the wide range of opportunities offered by the cloud infrastructure. As a result, robots have access to large databases, highly parallel computing, and collective learning capabilities anytime and anywhere. In addition, …
Intelligent Decision-Making Systems In Smart Greenhouses,
2025
Tashkent State Technical University named after Islam Karimov, 100095, Tashkent, Uzbekistan. E-mail: [email protected].
Intelligent Decision-Making Systems In Smart Greenhouses, Muso Berdiyor Ugli Allanov
Chemical Technology, Control and Management
Smart greenhouses offer a solution to sustainable food production under climate uncertainty, yet their management often depends on fixed rules or human intuition. This study proposes an intelligent decision-making framework that integrates optimization, simulation, and a neural set into a self-learning system. By generating “conditionally real data” through simulation and evolutionary algorithms, the system can predict microclimatic changes and optimize control of water, energy, and nutrients. Continuous digital feedback enables adaptive, data-efficient operation even with limited real data. Experimental results demonstrate reduced resource use and improved yield stability, advancing the development of autonomous and resilient greenhouse ecosystems.
The Use Of Diagnostic And Restructuring Methods To Build Reliable Management Systems,
2025
Tashkent State Technical University. Address: 2 Universitet st., 100095, Tashkent city, Republic of Uzbekistan. E-mail: [email protected], Phone: +998-90-325-85-55.
The Use Of Diagnostic And Restructuring Methods To Build Reliable Management Systems, Khurshid Salim Ugli Turayev
Chemical Technology, Control and Management
This article is devoted to the applied analysis of diagnostic and restructuring methods aimed at ensuring the reliability of control systems in the event of failures. The paper considers practical implementations of diagnostic and control algorithms using a servo drive setup as an example. The results of experiments are presented, demonstrating the system's behavior under various fault conditions. A comparative analysis of the effectiveness of the proposed solutions is carried out in terms of stability and operational accuracy. The obtained data confirm the feasibility of using adaptive control structures to increase the fault tolerance of technical systems. The article concludes …
