Chemical Engineering Commons^™

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Kevin Le, Adrian Damian, Mary Johnson, Ethan Phan, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The team researched, designed, and economically analyzed a full-scale adsorption column system to be applied in mining processes that leave high amounts of fluoride in their effluent. This system was designed to remove fluoride from water saturated with calcium sulfate, as calcium sulfate is present in high amounts in certain mining processes. Currently, high density sludge (HDS) is commonly employed to reduce fluoride concentrations, but due to solubility limits the sludge treatment cannot lower fluoride below 10 mg/L (ppm). The current enforceable EPA standard for discharged water is at 4 mg/L (ppm), although mining companies anticipate that this standard will …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Michelle Dopp, Kevin Le, Ethan Phan, Mary Johnson, Jacqueline Payne, Adrian Damian, Courtney Golman

Chemical Engineering Undergraduate Honors Theses

The Moo Pig Sooie’s researched, designed, and economically analyzed a full-scale adsorption column system to be applied in mining processes that leave high amounts of fluoride in their effluent. This system was designed to remove fluoride from water saturated with calcium sulfate, as calcium sulfate is present in high amounts in certain mining processes. Currently, high density sludge (HDS) is commonly employed to reduce fluoride concentrations, but due to solubility limits the sludge treatment cannot lower fluoride below 10 mg/L (ppm). The current enforceable EPA standard for discharged water is at 4 mg/L (ppm), although mining companies anticipate that this …

Addition Of Fermentation Experiment To Unit Operations Laboratory, Jeremy T. Rone

Electronic Theses and Dissertations

With the growth of the distillery and brewery industries and the potential jobs created for chemical engineers, it is imperative to equip the chemical engineering graduates from the University of Louisville with knowledge of bioreaction kinetics and experience in performing calculations to solve for concentration profiles and reaction rates. To accomplish this, it is recommended to add a fermentation experiment to the Unit Operations Laboratory II course.

Four groups of students from the Spring 2020 Unit Operations Laboratory II course performed the fermentation experiment. They were able to successfully complete all lab requirements as well as analyze the results and …

Labview Improvements And Equipment Redesign Of Unit Operations Distillation Column, Madalyn S Wead

Electronic Theses and Dissertations

Unit Operations labs are important tools to provide hands-on learning with various chemical processes. The distillation lab experiment allows students to connect equations and definitions from textbooks to the physical processes of distillation as they occur. LabVIEW was the software development tool used to create a program to control the distillation column from startup to shutdown. Improvements were made to both the distillation process equipment and the LabVIEW code to create a more interactive lab experience, enhance students’ conceptual understanding of distillation, and prepare students for their future career as chemical engineers.

Equipment addressed included non-linear valves, malfunctioning temperature and …

Determination Of Selenite And Selenate In Wet Flue Gas Desulfurization Process Water Through Ic-Icp-Ms And Hg-Icp-Aes, Samuel Anthony Kelty

Electronic Theses and Dissertations

During coal-fired electric power production, coal bound elemental selenium is released into the gas phase and oxidized to selenite and selenate in the wet flue gas desulfurization (WFGD) unit. Selenite and selenate solubilize in the WFGD process water. A process water system at a coal fired power plant contributes to environmental regulation compliance by removing the selenium species from WFGD process water. A selenium speciation method was developed for the purpose of better monitoring the selenium species present in the “treated” process water and to aid the process water system in meeting compliance with the Environmental Protection Agency’s Effluent Limitation …

Analysis Of Blood Purification Studies On Oxone Mediated Tempo-Oxidized Nano Cellulose Mixed-Matrix Membranes, Tony Roller

Biomedical Engineering Undergraduate Honors Theses

End-stage renal disease (ESRD) is currently the ninth leading cause of death in the United States, and of the 661,00 Americans diagnosed with ESRD, approximately 468,800 were on hemodialysis in 2016. Hemodialysis refers to a technique where a machine combined with a membrane, often referred to as an artificial kidney, is used to clean blood by removing any waste such as urea, potassium, and other smaller waste products while preserving the concentrations and integrity of cells and proteins in the blood. It has been shown in artificial blood studies that cellulose nanomaterials, like TEMPO/Oxidized cellulose nanoparticles (TOCNs), can be integrated …

Electrodialysis Device For In Vivo Power Delivery, Jessica L. Orton

Biomedical Engineering Undergraduate Honors Theses

It is estimated that over 3 million cardiac pacemakers have been implanted in patients globally. Current lithium-iodine pacemaker batteries last an average of about 10 years before the entire pacemaker unit must surgically be replaced, increasing the patient’s risk of procedure-related complications. Therefore, it is necessary to investigate means by which to extend the pacemaker battery lifetime. The renal vein and renal artery in the body naturally produce a salinity gradient through the filtering work of the kidneys. This salinity gradient energy potential can be harnessed through reverse electrodialysis (RED). RED is an electrochemical process that harnesses the Gibbs Free …

Quantifying Air Pollution At The Stamford Transportation Center, Brianna Mancuso, Kristina Wagstrom

Honors Scholar Theses

There is a need to analyze particulate matter concentrations at the Stamford Transportation Center according to the Western Connecticut Coalition of Governments. Stamford has recently undergone rapid urbanization and large scale construction resulting in traffic congestion. Congested traffic areas in urban centers are key contributors to poor air quality. Therefore, there is a need to analyze the pollution concentrations at the bus stops near the station. Every day, hundreds of shuttles and cars idle around the Transportation Center. Thousands of passengers wait at nearby bus stops every day and can potentially be exposed to high amounts of vehicle produced pollution …

Pollution Prevention Via Recovery Of Cerium (Iv) Oxide In Optics Company, Eugene Park, William Gallagher, Sydor Optics, Flint Creek Resources

Articles

Pollution prevention methods were applied at an optics manufacturer in an effort to improve recovery of a valuable polishing component, cerium oxide (ceria), 77% of which was lost to dragout and sewer discharge. Centrifugation and microfiltratiion were evaluated to develop a process that would increase recovery of used ceria, which would then be sent back to the ceria supplier for reclamation and reuse. Full-scale implementation included a high-speed centrifuge that operates continuously with a microfiltration system through recirculation in a single process tank. Sydor Optics has improved ceria recovery from 23% to 48%, saving thousands of dollars annually.

Solution To Exide Technologies Inbatec Inefficiency, Spencer Christian, Shixuan Hou, Mary Fairley, Reagan Gilker, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries. The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Jacqueline Payne, Mary Johnson, Kevin Le, Michelle Dopp, Courtney Golman, Adrian Damian, Ethan Phan

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective highdensity sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Ethan Phan, Adrian Damian, Kevin Le, Mary Johnson, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective high-density sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Scale-Up Of Polyaniline Cellulose Membranes, Isaac Bodemann

Chemical Engineering Undergraduate Honors Theses

Polyaniline coated cellulose membranes show impressive conductive properties that may be used to innovate traditional charged separation techniques, such as electrodeionization. However, these membranes are not sold to consumers, so they cannot be easily integrated into such systems. This research focuses on the scale-up and development of positively charged anion exchange membranes to be used in EDI cells. Novel cellulose membranes were made using lab-specific cellulose. These membranes were then coated using a polyaniline technique adopted from a paper titled, “Flexible Electrically Conductive Nanocomposite Membrane Based on Bacterial Cellulose and Polyaniline." This paper details the methods used to add the …

Solution To Exide Technologies Inbatec Inefficiency, Reagan Gilker, Mary Fairley, Spencer Christain, Shixuan Hou, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries.

The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …

Improving Pv Module Efficiency Through Cooling, Ashley Cox

Chemical Engineering Undergraduate Honors Theses

The Solarbacks researched and designed a variety of cooling methods that could be used to improve the efficiency of photovoltaics. These cooling methods can be separated into two categories: active and passive methods. The active cooling method of hydraulic cooling and the passive cooling methods of heat sinks (fins), optical coatings, thermosyphons, phase change materials, and thermoelectric generators were all taken into consideration as potential cooling methods. Passive cooling methods were preferred because the use of electricity required for the cooling mechanism would reduce the net electricity and subsequent profit from the panels.

Two variations of hydraulic cooling were researched: …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Adrian Damian, Kevin Le, Mary Johnson, Ethan Phan, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective highdensity sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Improving Pv Module Efficiency Through Cooling, Brandon Conrad, Blake Bradley, Ashley Cox, Donhy Mai, Harrison Dawson, Megan Reynolds, George Hill

Chemical Engineering Undergraduate Honors Theses

The Solarbacks researched and designed a variety of cooling methods that could be used to improve the efficiency of photovoltaics. These cooling methods can be separated into two categories: active and passive methods. The active cooling method of hydraulic cooling and the passive cooling methods of heat sinks (fins), optical coatings, thermosyphons, phase change materials, and thermoelectric generators were all taken into consideration as potential cooling methods. Passive cooling methods were preferred because the use of electricity required for the cooling mechanism would reduce the net electricity and subsequent profit from the panels.

Two variations of hydraulic cooling were researched: …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Courtney Golman, Kevin Le, Michelle Dopp, Adrian Damian, Mary Johnson, Jacqueline Payne, Ethan Phan

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective highdensity sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Peptoid And Antibody-Based Gfp Sensors, Solomon Isu

Graduate Theses and Dissertations

In this work, we have made and characterized a pair of immunobiosensors for detecting the green fluorescent protein (GFP) in an aqueous matrix. An anti-GFP antibody-based biosensor was assembled to detect GFP, while a novel peptoid (N-substituted oligomers of glycine designated as IOS-1) biosensor was also assembled for GFP detection. A quartz crystal microbalance (QCM) gold sensor was used as the supporting substrate for self-assembly of the immunobiosensors. Gravimetric measurements of the QCM gold sensor during immunobiosensor construction and operation were available in real-time using a QCM instrument. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and Fluorescence microscopy were used …

Green Synthesis Of Reduced Graphene Oxide For Efficient Adsorption-Photocatalysis Studies In Methylene Blue Dye Degradation, Ling Er Valerie Siong

Student Works (2020-2029)

Dyes are one of the major components of industrial effluents. Owing to the complex structures of these toxic organic compounds, the removal of dyes from effluents possesses a great challenge in wastewater treatment. In order to tackle this issue, one of the effective methods is to remove dyes via the combination of adsorption and photocatalysis processes. In the present work, reduced graphene oxide (rGO) was fabricated from graphene oxide (GO) by using an environmentally friendly solvothermal approach, whereby ethanol was employed as a non-toxic reductant. In order to investigate the formation of rGO, the reduction of GO was carried out …