Assessment Of Heavy Metal Concentration In Soils Around Geita The Gold Mine, Tanzania,
2021
udsm
Assessment Of Heavy Metal Concentration In Soils Around Geita The Gold Mine, Tanzania, Mariam G. Mgendi, Mkabwa L. K Manoko, W.J.S. Mwegoha, C. Southway C. Southway
Journal of Humanities and Social Sciences
Health issues related to gold mining cannot be underestimated. Gold mining produce acid mine drainage (AMD), which in turn releases heavy metals into the nearby environment, hence causing environmental pollution. Heavy metals are naturally very toxic, thus pose a great health concern especially when their concentration exceeds the recommended permissible limits. In this study, concentrations of five heavy metals—including Pb, Ni, Cr, Cu and Zn—were assessed in the soil around Geita Gold Mine (GGM). A total of 17 sampling sites were established from which the soil samples were collected at 0-15cm and 15-30cm soil depth. The concentration of both total …
Fluorination Of Al₂O₃ Coating For Lithium-Ion Battery,
2021
Missouri University of Science and Technology
Fluorination Of Al₂O₃ Coating For Lithium-Ion Battery, Xinhua Liang, Han Yu
Chemical and Biochemical Engineering Faculty Research & Creative Works
Improving the performance of cathodes by using surface coatings has proven to be an effective method for improving the stability of Li-ion batteries (LIBs), while a high quality film satisfying all requirements of electrochemical inertia, chemical stability, and lithium ion conductivity has not been found. A composite film composed of AI2O3 and AIF3 layers was coated on the surface of Li-rich NMC based electrodes by atomic layer deposition (ALD). The electrochemical characterization results indicated that the coating with 1 cycle of AIF3 ALD on 5 cycles of AI2O3 ALD (1 A1 F3-5AI2O …
Coating Compositions And Methods For Using The Same,
2021
Missouri University of Science and Technology
Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn Morrison
Chemical and Biochemical Engineering Faculty Research & Creative Works
Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2.
New Mechanism Insight For The Hydrogenation Of Co/Co2 Gas Mixtures To Hydrocarbons Over Iron-Based Catalyst,
2021
University of Kentucky
New Mechanism Insight For The Hydrogenation Of Co/Co2 Gas Mixtures To Hydrocarbons Over Iron-Based Catalyst, Sandeep Badoga, Michela Martinelli, Muthu Kumaran Gnanamani, Young Koh, Wilson D. Shafer
Center for Applied Energy Research Faculty and Staff Publications
Iron-based catalysts are the most suitable candidates for converting CO2 or CO2-rich syngas to hydrocarbons. However, several issues about the mechanism of CO2 hydrogenation are still unclear. In this work, we investigated the performance of an iron-based catalyst with H2/CO2, H2/CO/N2 and H2/CO/13CO2/N2 gas mixtures at the same process conditions (T = 270°C, P = 175 psi and SV = 3 NL/h/gcat). The CO2 hydrogenation rate was much lower than that observed for CO hydrogenation. 13CO2 …
Computational Study Of Helical And Helix-Hinge-Helix Conformations Of An Anti-Microbial Peptide In Solution By Molecular Dynamics And Vibrational Analysis,
2021
University of Rhode Island
Computational Study Of Helical And Helix-Hinge-Helix Conformations Of An Anti-Microbial Peptide In Solution By Molecular Dynamics And Vibrational Analysis, Faramarz Joodaki, Lenore M. Martin, Michael L. Greenfield
Chemical, Biomolecular, and Materials Engineering Faculty Publications
Many classical antimicrobial peptides adopt an amphipathic helical structure at a water-membrane interface. Prior studies led to the hypothesis that a hinge near the middle of a helical peptide plays an important role in facilitating peptide-membrane interactions.Here, dynamics and vibrations of a designed hybrid antimicrobial peptide LM7-2 in solution were simulated to investigate its hinge formation.Molecular dynamics simulation results on the basis of the CHARMM36 force field showed that the $\alpha$-helix LM7-2 bent around two or three residues near the middle of the peptide, stayed in a helix-hinge-helix conformation for a short period of time, and then returned to a …
3d-Printed Microfluidic Droplet Generator With Hydrophilic And Hydrophobic Polymers,
2021
Brigham Young University - Provo
3d-Printed Microfluidic Droplet Generator With Hydrophilic And Hydrophobic Polymers, Chandler A. Warr, Hunter S. Hinnen, Saroya Avery, Rebecca J. Cate, Gregory P. Nordin, William G. Pitt
Faculty Publications
Droplet generation has been widely used in conventional two-dimensional (2D) microfluidic devices, and has recently begun to be explored for 3D-printed droplet generators. A major challenge for 3D-printed devices is preventing water-in-oil droplets from sticking to the interior surfaces of the droplet generator when the device is not made from hydrophobic materials. In this study, two approaches were investigated and shown to successfully form droplets in 3D-printed microfluidic devices. First, several printing resin candidates were tested to evaluate their suitability for droplet formation and material properties. We determined that a hexanediol diacrylate/lauryl acrylate (HDDA/LA) resin forms a solid polymer that …
3d-Printed Microfluidic Droplet Generator With Hydrophilic And Hydrophobic Polymers,
2021
Brigham Young University
3d-Printed Microfluidic Droplet Generator With Hydrophilic And Hydrophobic Polymers, Chandler A. Warr, Hunter S. Hinnen, Saroya Avery, Rebecca J. Cate, Gregory P. Nordin, William G. Pitt
Faculty Publications
Droplet generation has been widely used in conventional two-dimensional (2D) microfluidic devices, and has recently begun to be explored for 3D-printed droplet generators. A major challenge for 3D-printed devices is preventing water-in-oil droplets from sticking to the interior surfaces of the droplet generator when the device is not made from hydrophobic materials. In this study, two approaches were investigated and shown to successfully form droplets in 3D-printed microfluidic devices. First, several printing resin candidates were tested to evaluate their suitability for droplet formation and material properties. We determined that a hexanediol diacrylate/lauryl acrylate (HDDA/LA) resin forms a solid polymer that …
Isolation And Purification Of Glycoglycerolipids To Induce Apoptosis In Breast Cancer Cells,
2021
Missouri University of Science and Technology
Isolation And Purification Of Glycoglycerolipids To Induce Apoptosis In Breast Cancer Cells, Muhammad Raisul Abedin, Sutapa Barua
Chemical and Biochemical Engineering Faculty Research & Creative Works
Monogalactosyldiacylglycerol (MGDG) is the most abundant type of glycoglycerolipid found in the plant cell membrane and mostly in the chloroplast thylakoid membrane. The amphiphilic nature of MGDG is attractive in pharmaceutical fields for interaction with other biological molecules and hence exerting therapeutic anti-cancer, anti-viral, and anti-inflammatory activities. In this study, we investigated the therapeutic efficacy of cyanobacteria derived MGDG to inhibit breast cancer cell growth. MGDG was extracted from a cyanobacteria Synechocystis sp. PCC 6803 followed by a subsequent fractionation by column chromatographic technique. The purity and molecular structure of MGDG were analyzed by nuclear magnetic resonance (NMR) spectroscopy analysis. …
Modelling And Analysis Of Performance For Biogas Fuelled Gas Engine Using Matlab,
2021
Universiti Malaya
Modelling And Analysis Of Performance For Biogas Fuelled Gas Engine Using Matlab, Indran Kunusilin
Student Works (2020-2029)
A wide-ranging performance evaluation of a multi-cylinder gas engine operating wit biogas as a fuel were studied based on its performance parameters such as effective power, torque, SFC, MEP and Thermal Efficiency and its HRR analysis with the aid of modeling software, MATLAB. The analysis and performance study were used based on the thermodynamic model of an Otto cycle, which is based on the gas engines used. Parameters such as cylinder pressure with domain of crank angle and heat addition model (using Wiebe function ) were studied to model the and analyze the HRR .Besides that , the contributing factors …
The 3-O-Sulfation Of Heparan Sulfate Modulates Protein Binding And Lyase Degradation,
2021
Missorui University of Science and Technology
The 3-O-Sulfation Of Heparan Sulfate Modulates Protein Binding And Lyase Degradation, Pradeep Chopra, Apoorva Joshi, Jiandong Wu, Weigang Lu, Tejabhiram Yadavalli, Margreet A. Wolfert, Deepak Shukla, Joseph Zaia, Geert Jan Boons
Chemical and Biochemical Engineering Faculty Research & Creative Works
Humans Express Seven Heparan Sulfate (HS) 3-O-Sulfotransferases that Differ in Substrate Specificity and Tissue Expression. Although Genetic Studies Have Indicated that 3-O-Sulfated HS Modulates Many Biological Processes, Ligand Requirements for Proteins Engaging with HS Modified by 3-O-Sulfate (3-OS) Have Been Difficult to Determine. in Particular, the Context in Which the 3-OS Group Needs to Be Presented for Binding is Largely Unknown. We Describe Herein a Modular Synthetic Approach that Can Provide Structurally Diverse HS Oligosaccharides with and Without 3-OS. the Methodology Was Employed to Prepare 27 Hexasaccharides that Were Printed as a Glycan Microarray to Examine Ligand Requirements of a …
A Microscale Approach To Investigate Breast Cancer Cellular Communication And Migration,
2021
Louisiana State University and Agricultural and Mechanical College
A Microscale Approach To Investigate Breast Cancer Cellular Communication And Migration, Sharif Mohammad Mizanur Rahman
LSU Doctoral Dissertations
Metastatic breast cancer significantly decreases patient survival, with the majority of deaths caused by secondary metastasis. Cancer metastasis is a multi-step process that starts with the detachment of a cancer cell from the primary tumor and ends with establishing a secondary tumor at a distal location. This work's focus was to use an interdisciplinary microscale approach to study how cancer cells respond to neighboring cells and how they migrate in response to chemical gradients. Two distinct devices, a microfluidic device, and a 3D-printed plate insert, were developed to perform co-culture studies to elucidate the impact of ASCs on cancer cell …
Stabilizing Liquid Drops In Nonequilibrium Shapes By The Interfacial Crosslinking Of Nanoparticles,
2021
Rowan University
Stabilizing Liquid Drops In Nonequilibrium Shapes By The Interfacial Crosslinking Of Nanoparticles, Mohd A. Kahn, Martin F. Haase
Henry M. Rowan College of Engineering Departmental Research
Droplets are spherical due to the principle of interfacial energy minimization. Here, we show that nonequilibrium droplet shapes can be stabilized via the interfacial self-assembly and crosslinking of nanoparticles. This principle allows for the stability of practically infinitely long liquid tubules and monodisperse cylindrical droplets. Droplets of oil-in-water are elongated via gravitational or hydrodynamic forces at a reduced interfacial tension. Silica nanoparticles self-assemble and cross-link on the interface triggered by the synergistic surface modification with hexyltrimethylammonium- and trivalent lanthanum-cations. The droplet length dependence is described by a scaling relationship and the rate of nanoparticle deposition on the droplets is estimated. …
Study On Engine Performance And Exhaust Pollutant Using Isobutanol - Calophyllum Inophyllum Biodiesel - Diesel Ternary Blends In A Diesel Engine,
2021
Universiti Malaya
Study On Engine Performance And Exhaust Pollutant Using Isobutanol - Calophyllum Inophyllum Biodiesel - Diesel Ternary Blends In A Diesel Engine, Mohd Azham Mohd Alwi
Student Works (2020-2029)
Renewable energy sources such as biodiesel and bio-alcohol are desirable and are alternative to meet energy demand and control emission, from renewable sources such as ethanol, methanol, butanol, and pentanol. Biodiesel has a notable interest in offering many advantages with few disadvantages and needs to be extended for comprehensive use. Applying greater alcohols such as butanol with biodiesel in fuel blends is a beneficial technic to enhance the fuel characteristics and use biodiesel and alcohol efficiently. Isobutanol is an organic compound that has very low volatility, higher-chain alcohols have energy densities close to gasoline. It is not as volatile or …
Removal Of Selected Organic Pollutants In Landfill Leachate Using Natural Coagulant From Dillenia Indica Seed Extract,
2021
Universiti Malaya
Removal Of Selected Organic Pollutants In Landfill Leachate Using Natural Coagulant From Dillenia Indica Seed Extract, Aziz Ahmed
Student Works (2020-2029)
This study is aimed to identify and characterise novel green coagulant from Dillenia indica seed extracts for the removal of selected persistent organic pollutants (POPs) in landfill leachate using coagulation-flocculation process. The removal efficacy of D. indica seed extracts was compared with commercially available coagulants namely Locust Bean Gum (LBG) and alum. Additionally, it focused on the optimisation of the variables of the coagulation-flocculation process such as coagulants dosage, pH and mixing speed for POPs removal. The functional groups, morphological behaviour and surface area of the dried flocs and samples were analysed using Fourier transform infrared (FTIR), Scanning Electron Microscopy …
A Water Quality And Contaminant Source Assessment Of Arbuckle Creek In Fayette County, West Virginia,
2021
Marshall University
A Water Quality And Contaminant Source Assessment Of Arbuckle Creek In Fayette County, West Virginia, Sarah Ashby Simonton
Theses, Dissertations and Capstones
Arbuckle Creek, located in Minden, West Virginia, is a stream that runs through Oak Hill, WV and is characterized by the presence of the Oak Hill Wastewater Treatment Plant and the history of the contamination of polychlorinated biphenyl (PCBs) from the copious amount of contamination from the Shaffer Equipment Site and the pollution from mining completed in the area throughout the 1900’s. In order to assess the reaches of the current water quality, samples were collected and assessed for benthic macroinvertebrates, water parameters, benthic algae, and habitat. This was accomplished using the West Virginia Department of Environmental Protection (WVDEP) agency’s …
“Greener” Chemical Modification Of Cellulose Nanocrystals Via Oxa-Michael Addition With N-Benzylmaleimide,
2021
University of Mississippi
“Greener” Chemical Modification Of Cellulose Nanocrystals Via Oxa-Michael Addition With N-Benzylmaleimide, Mohammad Jahid Hasan, Ashley E. Johnson, Esteban E. Ureña-Benavides
Faculty and Student Publications
Surface modification of cellulose nanocrystals (CNCs) was conducted by an oxa-Michael addition of primary hydroxyl groups on the CNC surface with N-Benzylmaleimide (BnM). Six principles of green chemistry were used to obtain the hydrophobized CNC. Two catalytic approaches were used, a self-catalyzed reaction where alkyl sulfuric acid on the surface of the CNC was the catalyst, and a base-catalyzed approach using triethylamine (TEA). DMSO was chosen as reaction solvent due to its low cost, low toxicity and ability to disperse native CNC compared to other polar diprotic solvents. NMR and FTIR studies confirmed the successful modification of CNCs in both …
Effects Of Resin Chemistries On The Selective Removal Of Industrially Relevant Metal Ions Using Wafer-Enhanced Electrodeionization,
2021
University of Arkansas, Fayetteville
Effects Of Resin Chemistries On The Selective Removal Of Industrially Relevant Metal Ions Using Wafer-Enhanced Electrodeionization, Humeyra B. Ulusoy Erol, Christa N. Hestekin, Jamie A. Hestekin
Chemical Engineering Faculty Publications and Presentations
Wafer-enhanced electrodeionization (WE-EDI) is an electrically driven separations technology that occurs under the influence of an applied electric field and heavily depends on ion exchange resin chemistry. Unlike filtration processes, WE-EDI can be used to selectively remove ions even from high concentration systems. Because every excess ion transported increases the operating costs, the selective separation offered by WE-EDI can provide a more energy-efficient and cost-effective process, especially for highly concentrated salt solutions. This work reports the performance comparison of four commonly used cation exchange resins (Amberlite IR120 Na+, Amberlite IRP 69, Dowex MAC 3 H+, and …
Surface And Interfacial Phenomena Between Soil And Oil,
2021
University of Mississippi
Surface And Interfacial Phenomena Between Soil And Oil, Md Firoz Ahmed
Electronic Theses and Dissertations
Crude oil and motor oil spills on land have severe environmental consequences that pose threats to both humans and natural resources. It is particularly important to know the flow behavior of oils to protect terrestrial ecosystems from this kind of damage. The spreading kinetics, contact angle (CA), and droplet baseline studies of crude oil and motor oils were investigated over several realistic soil-based matrices composed of topsoil (silt-dominant), sand, clay, and moisture. It was found that with an increase in moisture content (MC), the spreading area decreased, and initial spreading time increased for all given oil. The initial CA generally …
Solubility Measurements Of Hydrophobic Solutes In Supercritical Carbon Dioxide And Subsequent Impregnation Into Paper Substrates For Surface Modifications,
2021
University of Mississippi
Solubility Measurements Of Hydrophobic Solutes In Supercritical Carbon Dioxide And Subsequent Impregnation Into Paper Substrates For Surface Modifications, Arghavan Beheshtimaal
Electronic Theses and Dissertations
Supercritical Fluids (SCFs) have received a great deal of attention for their various applications in chemical, biochemical, pharmaceutical, and materials processing. In this study, we investigate surface modification to paper substrates using supercritical impregnation (SCI) techniques, with applications in food packaging. One of the key factors required for this study is understanding the solubility of hydrophobic solutes in supercritical carbon dioxide (scCO2). Polar compounds are poorly soluble in scCO2 due to their lack of polarity and frequently co-solvents are also introduced to enhance solubility. In this study, the maximum solubility of alkyl ketene dimer (AKD)/n-heptane and vegetable wax (VW)/n-heptane solutions …
Dynamic Modeling Of A Coal Mill For Simultaneous Dynamic Data Reconciliation And Parameter Estimation,
2021
West Virginia University
Dynamic Modeling Of A Coal Mill For Simultaneous Dynamic Data Reconciliation And Parameter Estimation, Vinayak Dwivedy
Graduate Theses, Dissertations, and Problem Reports (ETD)
In comparison with other gaseous and liquid fossil fuels used in power production, a coal fired power plants requires additional equipment for fuel preparation. A medium speed mill is usually a preferred equipment which serves in grinding and drying of the raw feed coal. Due to the high recycle of coal particles within a medium speed coal mill, the mill performance is sensitive to the efficiency of grinding and classification operations within mill. The goal of this research is to study the performance of the milling system and develop a method to estimate some of the unmeasured variables, which include …
