Chemical Engineering Commons^™

Comprehensive Evaluation Of Self-Healing Polyampholyte Gel Particles For The Severe Leakoff Control Of Drilling Fluids, Lili Yang, Chunlin Xie, Tian Ao, Kaixiao Cui, Guancheng Jiang, Baojun Bai, Yongwei Zhang, Jun Yang, Xingxing Wang, Weiguo Tian

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lost circulation has been a serious problem to be solved in many drilling practices during oil, gas and geothermal well drillings. Many materials have been developed and evaluated for the purpose. However, their performance to plug severe leakoff is very limited. Herein, an injectable self-healing hydrogel based on polyampholyte with sulfonated and quaternary ammonium functionalities (P(MPTC-co-NaSS)) was developed and comprehensively evaluated to prevent the severe loss of fluids to formation. By incorporating cation-π (π is for aromatic residues) interaction, the hydrogel shown self-healing property and robustness in severe environment (temperature, salt) by comparison with other hydrogels merely consisting of cation-anion …

Reactive Thin Film Polymers And Thin Film Composite Membranes For The Rapid Screening Of Uranium Isotopes, Abenazer W. Darge

All Dissertations

Traditional radiochemistry approaches for the detection of trace-level alpha-emitting radioisotopes in water require lengthy offsite sample preparations and do not lend themselves to rapid quantification. Therefore, a novel platform is needed that combines onsite purification, concentration, and isotopic screening with a fieldable detection system. My dissertation research objective was to develop novel reactive thin polymer films and thin film composite membranes for the selective separation of uranium from environmental water followed by direct isotopic analysis by alpha spectroscopy. Chapter 1 reviews progress made on uranium separation from aqueous matrices and discusses methods used for the determination of isotopic composition.

Chapter …

Study Of Gas Holdup Distribution In Cylindrical Split Airlift Reactor By Using Gamma-Ray Densitometry (Grd), Abbas J. Sultan, Laith S. Sabri, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The local gas holdup details and behaviors in the cylindrical split airlift column by using an unconventional gamma-ray densitometry (GRD) measurement in non-invasive manner technique was investigated for the first time in this work for such kind of airlift column. With different gas velocities, 1, 2, and 3 cm/s, at three various axial planes (different levels) in z = 3, 60, and 110 cm were studied for local distribution in radial gas holdup profiles. The distribution in gas–liquid phases (air-water system) in the entire split reactor column, in the rising and descending sides, including their behavior in the upper and …

Process Evaluation And Kinetic Analysis Of 3d-Printed Monoliths Comprised Of Cao And Cr/H-Zsm-5 In Combined Co2 Capture-C2h6 Oxidative Dehydrogenation To C2h4, Khaled Baamran, Shane Lawson, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, dual-function materials (DFMs) comprised of CaO and Cr/H-ZSM-5 were formulated in 3D-printed monolithic structures and investigated in a combined process for capture and utilization of CO₂ in oxidative dehydrogenation of C₂H₆ to C₂H₄ (CO₂-ODHE). Various formulation strategies were employed to fabricate these DFM structures. Two bed designs were considered: i) a layered-bed in which adsorbent (CaO) and catalyst were printed separately and stacked on top of each other, and ii) a single-layer bed where the adsorbent-catalyst materials were 3D-printed into a singular monolith and loaded into the bed …

Integration Of Dynamic Growth Modeling And Hydrodynamics In An Internal-Loop Split Photobioreactor, Laith S. Sabri, Aastha Ojha, Abbas J. Sultan, Muthanna H. Aldahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, new high-quality experimental data for culturing green microalgae Scenedesmus in tubular and cylindrical split airlift photobioreactors were obtained under different operating conditions. The obtained experimental data of culturing microalgae Scenedesmus in a tubular photobioreactor were used for determining the kinetic parameters of the photosynthetic reaction. On the other hand, the culturing of green microalgae in a split airlift photobioreactor was used to measure the microalgae cell trajectory using an advanced radioactive particle tracking (RPT) technique. The obtained results in terms of kinetic parameters of the photosynthetic reaction and microalgae cell trajectory were integrated for the first time …

Random Trilobe Packing Using Rigid Body Approach And Local Gas-Liquid Hydrodynamics Simulation Through Cfd With Experimental Validation, Binbin Qi, Sebastián Uribe, Omar Farid, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

It is quite difficult to measure the local information of the gas/liquid flow inside random packed extrudate catalyst beds in a large scale. Obtaining the local information through computational fluid dynamic (CFD) simulations in such system is also difficult due to the complexity of random particle packing and two-phase flow simulation. An efficient packing scheme was implemented to randomly pack 2917 trilobe particles (10 cm in height) in a 2-inch column to represent the trickle bed reactor (TBR) based on the rigid body approach. The generated geometry was used to define the computational domain for the two-phase hydrodynamics simulation based …

Hydration Of High-Alumina Calcium Aluminate Cements With Carbonate And Sulfate Additives, Jonathan Lapeyre, Sai Akshay Ponduru, Monday Uchenna Okoronkwo, Hongyan Ma, Aditya Kumar

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study investigated the influence of limestone (LS) and calcium sulfate (C$) mineral additives on the hydration kinetics of high-α-Al₂O₃ calcium aluminate cement (CAC) utilizing experimental techniques and thermodynamic simulations. Increasing the replacement level of limestone or calcium sulfate increased the cumulative heat of the hydration reaction. The limestone exhibited limited acceleratory effects to the CAC hydration kinetics due to the coarseness of the powder. The coarse particle size distribution limited any heterogenous nucleation that would have occurred with a finer particle size as well as the intrinsic insolubility kinetically limits the formation of monocarboaluminate phases. Conversely, …

Liquid And Solids Phase Backmixing In A Bubble And Slurry Bubble Column Using A Virtual Tracer Response Methodology Based On The Trajectory Data Of The Radioactive Particle Tracking (Rpt) Technique, Lu Han, Premkumar Kamalanathan, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Virtual tracer response methodology developed based on the trajectory data of the computer aided radioactive particle tracking (CARPT) technique was demonstrated. The demonstrated virtual tracer technique has advantages of non-invasiveness, near perfect injection/sampling, and flexibility in choosing the sampling/injection boundaries in a specific spatial pattern. With the developed virtual tracer technique, liquid and solids back mixing was investigated at the conditions mimicking Fischer-Tropsch synthesis. Experiments were conducted at different pressure, solids loading, and superficial gas velocity. The axial dispersion model (ADM) and recirculation and cross flow dispersion (RCFD) models were used to model the liquid mixing. Transient sedimentation dispersion model …

Review Of Biomechanical Studies And Finite Element Modeling Of Sternal Closure Using Bio-Active Adhesives, Amatulraheem Al-Abassi, Marcello Papini, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The most common complication of median sternotomy surgery is sternum re-separation after sternal fixation, which leads to high rates of morbidity and mortality. The adhered sternal fixation technique comprises the wiring fixation technique and the use of bio-adhesives. Adhered sternal fixation techniques have not been extensively studied using finite element analysis, so mechanical testing studies and finite element analysis of sternal fixation will be presented in this review to find the optimum techniques for simulating sternal fixation with adhesives. The optimal wiring technique should enhance bone stability and limit sternal displacement. Bio-adhesives have been proposed to support sternal fixation, as …

Establishing Pteridine Metabolism In A Progressive Isogenic Breast Cancer Cell Model – Part Ii, Lindsey Rasmussen, Zachary Foulks, Jiandong Wu, Casey Burton, Honglan Shi

Chemistry Faculty Research & Creative Works

Introduction: Determining the biological significance of pteridines in cancer development and progression remains an important step in understanding the altered levels of urinary pteridines seen in certain cancers. Our companion study revealed that several folate-derived pteridines and lumazines correlated with tumorigenicity in an isogenic, progressive breast cancer cell model, providing direct evidence for the tumorigenic origin of pteridines. Objectives: This study sought to elucidate the pteridine biosynthetic pathway in a progressive breast cancer model via direct pteridine dosing to determine how pteridine metabolism changes with tumorigenicity. Methods: First, MCF10AT breast cancer cells were dosed individually with 15 pteridines to determine …

Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work, Stephanie Beitle

Chemical Engineering Undergraduate Honors Theses

This thesis covers a two part project: the production methods to create a double collagen binding domain molecule with a growth factor for wound healing applications and the development of a new in-house production method for isolating C1q from bovine blood. The wound healing molecule was created using transformation, sonication, and purification before being tested via electrophoresis SDS page and Western blots to confirm the molecule’s presence. The C1q in-house production method utilizes an ultrafiltration flow cell rather than dialysis at a critical point in the process, allowing for researchers to not only be able to use a single small …

Preparation, Cure, And Characterization Of Cyanate Ester-Epoxy Blends, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

Cyanate ester resins are often blended with lower cost epoxy monomers in order to modify the cost, toughness, and processing characteristics. There are also several choices of catalysts that can be used to improve processing, namely by reducing the cure temperature. This study was undertaken to illustrate how a designed experiment approach can be used to systematically investigate a wide range of material combinations and illuminate the basic cure behavior of some simple cyanate ester – epoxy blend combinations. Two commercial cyanate ester resin products were obtained. Each was blended with a bisphenol F based epoxy resin at two different …

Development Of Upconverting Films Containing Singlet Sink, Blake Mckay

Honors Theses

Upconversion is the conversion of light from a longer wavelength to a shorter wavelength. This technique has a wide range of applications in solar technology, bioimaging, drug delivery, and many other fields.¹ In this study, a three-part upconverting system was developed including a component termed singlet sink in order to increase upconversion efficiency. The components of this system included Palladium (II) Octaethylporphrin (PdOEP), pyrenebutanol, and 9-phenyl-10-(p-tolylethynyl)-anthracene (PTEA). A procedure was developed in order to create and process films containing these three materials dispersed in a poly(methyl methacrylate) (PMMA) matrix. Upconversion was analyzed in both solution and the …

Layered Epoxide-Amine/Boron Nitride/Graphene Nanocomposites For Enhanced Multifunctional Shielding, Alyssa J. Necaise

Honors Theses

The development of high-power electromagnetic wave sources in the modern era has the ability to interfere with aircraft electronics and cause localized heating – necessitating advanced materials for electromagnetic interference (EMI) and thermal shielding. Multifunctional nanoparticles dispersed within polymer matrices can combat these issues; however, the best way to combine thermally and electrically conductive species to maximize electromagnetic interference shielding and thermal shielding is undetermined. Multifunctional layered epoxide/amine nanocomposites were prepared from tetra and octafunctional epoxide monomers (TGDDM and SU-8), 4,4-DDS tetrafunctional amine curative, and 1 wt.% hexagonal boron nitride nanoplatelets and/or 1 wt.% graphene nanoplatelets to form monolayer and …

Optimizing Virus Prefiltration For Biopharmaceutical Manufacturing, Solomon Isu

Graduate Theses and Dissertations

Virus filters are single-use devices that use a size-based separation process. In virus filters, contaminating virus particles are retained while the therapeutic molecules pass through the membrane pores. Virus filters are an essential component of the overall virus clearance strategy. Sections 1 and 2 of this dissertation provide an introduction and extensive review of monoclonal antibody (mAb) process development, where virus filtration is pivotal. In section 3, prefiltration studies were performed with an industrially relevant IgG1 type mAb using adsorptive and size-exclusion-based prefilters with different mechanisms of action. This mAb has an isoelectric point range of 7.1 to 8.0 and …

Investigating The Effect Of Polymer Hydrogels On The Antimicrobial Properties Of Activated Carbon Through The Utilization Of Bacterial, Viral, And Parasitic Microorganisms, Zoe Gunter

Honors Theses

Activated carbon (AC) has long been utilized in biomedical applications due to its innate antimicrobial characteristics. However, little is understood about the mechanism of action that allows AC to prohibit the propagation of different pathogen species. To further ascertain these characteristics and how they affect the propagation of pathogens, procedures were designed with bacterial, viral, and parasitic agents which were utilized in conjunction with varying concentrations of polymer hydrogels to examine the antimicrobial efficacy of AC. The studies performed for this thesis were conducted employing coconut-based AC and Noveon^® AA-1 Polycarbophil USP or Carbopol^® 974P NF hydrogels which, …

Surface-Functionalized Chemiresistive Films That Exploit H-Bonding, Cation-Pi, And Metal-Halide Interactions., Prasadanie Karunarathna Adhihetty

Electronic Theses and Dissertations

The development of gas sensors for detection of volatile organic compounds (VOCs) has been of interest in the sensing field for decades. To date, the use of metal nanoparticle-based chemiresistors for trace VOC detection, particularly gold nanoparticle-based sensors, is of great interest due to their high chemical stability, ease of synthesis, unique optical properties, large surface to volume ratio, and high level of conductivity. Much effort has been devoted towards gold monolayer protected clusters (Au MPCs) as chemiresistors to detect harmful VOCs. The present thesis documents the results of our efforts to exploit the advantages of functionalized Au MPCs chemiresistors …

Structural, Charge Transport, Gas Sensing, Magnetic, Pseudocapacitive, And Electrocatalytic Properties Of Perovskite Oxides., Surendra Bahadur Karki

Electronic Theses and Dissertations

Perovskites are functional materials with the general formula ABO₃ (A = alkali, alkaline earth or lanthanoid cations and B = transition metal or main group cations). These materials are marked by a variety of crystal structures and interesting properties such as colossal magnetoresistance, ferroelectricity, multiferroicity, superconductivity, pseudocapacitance, gas sensing, charge transport, and electrocatalytic properties. The formula of perovskite can be written as AA’BB’O₆, when there is ordering between two cations over A and B-sites. Such compounds are called double perovskite oxides. Some amount of oxygen could be lost from crystal structure without decomposition of the phase. Such …

Engineering Lewis Acidic Materials For Biomass Conversion And Battery Applications., Md Anwar Hossain

Electronic Theses and Dissertations

My long-term goal is to develop catalytic systems to produce renewable energy for a sustainable society. The overall research objective of my dissertation is to advance understanding of Lewis acidic materials for (1) conversion of renewable lignin into phenolics and (2) enhanced cycling stability of lithium metal batteries to safely store renewable electricity from wind and solar, thereby laying the groundwork for our transition to a sustainable society. Petroleum is a conventional feedstock for current transportation fuels (gasoline, diesel, and jet fuels). However, petroleum is a finite resource and produces greenhouse gases (CO₂ and CH₄) upon processing, …

Materials And Interfaces For Electrocatalytic Hydrogen Production And Utilization., Alexander Jiya Gupta

Electronic Theses and Dissertations

Mass industrialization over the last few centuries has created a global economy which is dependent upon fossil fuels to satisfy an exponentially increasing demand for energy. Aside from the possible depletion of this finite resource, the combustion of fossil fuels releases greenhouse gases into the atmosphere which cause the global temperature to rise – a phenomenon which has already begun to create geologic and geopolitical instability and shows no signs of abatement. One proposed method to rid humanity of its dependence on fossil fuels is to use green hydrogen as an energy carrier. In this scheme, excess electricity from a …