Other Chemical Engineering Commons^™

Development Of Co2 Capture Method Via Polyurethane-Amine Sorbent In Vsa, Samantha Starkey, David S. Rinehart

Williams Honors College, Honors Research Projects

With increases in extreme weather and global temperatures, research is delving into CO₂ capture to help reverse climate change. This project explored utilizing vacuum swing adsorption (VSA) for CO₂ capture and release. VSA uses a sorbent, in this case amine sorbents, to capture CO­­₂ from air and subsequently removes it via vacuum. Polyurethane (PU) foam was investigated as a potential matrix for amine sorbents to increase exposure of CO₂ capturing amines to air by utilizing its porous structure. PU mixing studies were conducted to determine the feasibility of mixing PU foam with amines and coating foams …

Investigation Of Reactions Occurring In Municipal Solid Waste Residues, Tasnuva T. Moutushi

Dissertations and Theses

Each year more than 290 million tons of municipal solid waste (MSW) is generated in the U.S. Understanding the reactions occurring in waste during disposal, transport, and storage is important to move towards an integrated waste management strategy. Recently some landfills in the U.S. have been reported to exceed the regulatory temperature range, causing numerous regulatory challenges. The reason for this phenomenon is still unidentified. In addition, the co-disposal of the MSW ash in landfills lead to various reactions which can impact the landfill environment. Understanding the reactions occurring in the MSW and in ash is essential to minimize and …

Advanced Process Modeling And Optimization Of Amine-Based Carbon Capture Process, Paul Jide Terhemba Akula

Graduate Theses, Dissertations, and Problem Reports (ETD)

With the rise of carbondioxide (CO2) concentration in the atmosphere to more than 400 parts per million (ppm), research efforts have been focused on achieving net-zero carbon emission technologies. Post-combustion CO2 capture (PCC) is a key strategy in reducing CO2 emissions. Amine-based CO2 capture is the baseline technology for retrofitting existing power stations. However, the integration of amine-based PCC technology with power plants to reduce greenhouse gas emissions incurs a high energy penalty, decreasing a powerplant’s efficiency by about 23 percentage points. Understanding the capture plant dynamics plays an important role in its technical and economic performance. Rigorous models are …

Itraconazole Nanocomposites Prepared Via Rotary Evaporator Drying Of Nanomilled Suspensions, Alexander Santos Coelho

Theses

The aim of this study is to explore the feasibility of rotary evaporation for drying wetmilled drug suspensions as a novel approach to produce drug nanocomposites that exhibit fast redispersion and immediate drug release. To this end, the physical stability of the nanomilled itraconazole (drug) suspensions, a.k.a., nanosuspensions, during the milling and storage; the drying of the itraconazole nanosuspensions via the rotary evaporator; and the type/loading of various polymers/surfactants (dispersants) on aqueous redispersion and drug release from the nanocomposites were examined. Our results suggest that smaller drug particle size, owing to nanomilling, and smaller nanocomposite particle size, owing to optimized …

An Introductory Study Of Coal Fly Ash Enhancement For Heavy Metal Removal In Wastewater Treatment., Samuel T. Romes

Electronic Theses and Dissertations

Coal Combustion Products are the materials that remain after pulverized coal is burned to generate electricity. The fine portion, fly ash, has many re-use capabilities across various industries. Most recent data shows that approximately 60% of fly ash produced in the United States was used with the largest re-use being concrete additives. This work aims to enhance fly ash via hydrothermal treatment in order to expand the re-use capabilities of the material. These materials were tested as adsorbents for heavy metal removal from wastewater samples. The metals tested for removal were Copper (II) Acetate, Cadmium Chloride, Boric Acid, Sodium Selenite, …

Scalable Synthesis Of Alumina Nanowires By Wet Chemical Method., Luis N Moreno

Electronic Theses and Dissertations

To satisfy an increasing demand for large-scale processes for producing alumina nanomaterials, a wet chemical method was evaluated. A potassium salt precursor was combined with aluminum to produce alumina – based nanowires. Compared with current methods such as thermal oxidation, sol-gel, and laser ablation, this method is highly scalable due to relatively low energy requirements and the ability to carry out the primary reaction under ambient conditions. The nanowire samples were evaluated using SEM, XRD, BET, and TEM to confirm morphology, phases present, and surface area. A porous nanowire structure was confirmed which has a BET surface area of 324.6 …

Entrepreneurially Minded Learning In The Unit Operations Laboratory Through Community Engagement In A Blended Teaching Environment, Erick S. Vasquez, Kelly Bohrer, Abraham Noe-Hays, Arthur Davis, Matthew Dewitt, Michael J. Elsass

Chemical and Materials Engineering Faculty Publications

Online and blended learning opportunities in Chemical Engineering curriculum emerged due to COVID-19. After eight weeks of in-person Unit Operations Laboratory sessions, a remote-learning open-ended final project was assigned to student teams. The assignment involved aspects related to entrepreneurial-minded learning (EML) and community-based learning (CBL). Results show correlations between self-directed learning and the EML framework. Continuous support and involvement of a community partner correlate to students' m

Anti-Corrosion Protection Of Metal Parts Of Transportation Equipment With A Polymer Coating Based On Epoxiurethane, Aida Barkhanadjyan, Ravshan Khakimov, Botir Ibragimov, Oybek Vafayev, Dmitriy Ayrapetov

CHEMISTRY AND CHEMICAL ENGINEERING

Automotive vehicles are constantly exposed to corrosion processes, and the durability of metal parts depends on the intensity of corrosion. The loss of metals from corrosion is 8-10% of the initial metal mass. In total, losses from corrosion are 4-6% of national income in many countries. This indicates the need for research and the importance of scientific and technical work in this area. This can be achieved by developing a technology for producing anticorrosive compounds and applying them as protective coatings. The anticorrosive protection of a coating synthesized on the basis of local raw materials - epoxyurethane with an additive …

Analytical Model For Electromagnetic Induction In Pulsating Ferrofluid Pipe Flows, Huiyu Wang, John G. Monroe, Swati Kumari, Serhiy O. Leontsev, Erick S. Vasquez, Scott M. Thompson, Matthew J. Berg, Dibbon Keith Walters, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

No abstract provided.

Mixed Metal Oxide Nanowires Via Solid State Alloying., Veerendra Atla

Electronic Theses and Dissertations

Mixed metal oxide materials with composition control find applications in energy conversion and storage processes such as heterogenous catalysis, photoelectrochemical catalysis, electrocatalysis, thermal catalysis, and lithium-ion batteries. Mixed metal oxides and/or complex oxides with composition control and in one-dimensional form as nanowires could be interesting to various catalysis applications due to control on single crystal surfaces, active sites, acidity versus basicity site density, and oxygen vacancies. The major challenge is to synthesize mixed metal oxide nanowires beyond binary oxides with composition control. In this dissertation, solid state alloying of binary oxide nanowires with solid and liquid precursors is studied to …

Room Temperature Alkali Treatment Of Rice Straw For Enhanced Enzymatic Hydrolysis., Seth Mains

Electronic Theses and Dissertations

Due to the pollution of fossil fuels due to greenhouse emissions, researchers continue to search for alternative methods that allow for the clean production of energy, fuels, and polymer fibers. A method currently under investigation is the use of lignocellulosic biomass as a solution to current problems with energy and polymer fiber production. Through the process of pretreatment, possibilities for lignocellulosic biomass expand due to improved accessibility of the cellulose and hemicellulose which can be broken down via enzymatic hydrolysis into C5 and C6 sugars such as xylose and glucose. This study investigated the fermentation of the rice straw into …

Wetting And Drying Dynamics For Tio2 With Pbs Quantum Dots., Kelly M. Lee

Electronic Theses and Dissertations

Initial solar cells utilized silicon and alloys for their economic viability. Photoelectrochemical photovoltaic cells were discovered with technological advancement which increased solar efficiency and further improved economic feasibility leading to quantum dot sensitized solar cells. Lead sulfide quantum dots and titanium dioxide were studied for wetting and drying effects. Zeta potential, pH values, SEM, and optical microscopes quantified or observed the colloidal suspension and dried sample behavior. Combined mixtures of lead sulfide and titania were dried at 3.6 pH and 12.56 pH values. This due to the observed zeta potential isoelectric point of titania, and behavior showed increased stability occurring …

The Study Of Copper Corrosion Mechanisms Using Electrochemical Experimental Techniques., Evan Grimm

Electronic Theses and Dissertations

The purpose of this study was to discover and thoroughly explain the corrosion mechanisms of copper in saltwater, tap water and deionized water, and to apply these methods and findings when testing the corrosion mechanisms of other materials. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, and Tafel analysis.

The copper was found to corrode at a greater rate in saltwater, followed by tap water then deionized water, with a larger difference between saltwater and tap water than between tap water and deionized water. Each reaction was found to be both kinetically …

Facile Fabrication And Characterization Of Kraft Lignin@Fe3o4 Nanocomposites Using Ph Driven Precipitation: Effects On Increasing Lignin Content, Frankie A. Petrie, Justin M. Gorham, Robert T. Busch, Serhiy O. Leontsev, Esteban E. Ureña-Benavides, Erick S. Vasquez

Chemical and Materials Engineering Faculty Publications

This work offers a facile fabrication method for lignin nanocomposites through the assembly of kraft lignin onto magnetic nanoparticles (Fe3O4) based on pH-driven precipitation, without needing organic solvents or lignin functionalization. Kraft lignin@Fe3O4 multicore nanocomposites fabrication proceeded using a simple, pH-driven precipitation technique. An alkaline solution for kraft lignin (pH 12) was rapidly injected into an aqueous-based Fe3O4 nanoparticle colloidal suspension (pH 7) under constant mixing conditions, allowing the fabrication of lignin magnetic nanocomposites. The effects of increasing lignin to initial Fe3O4 mass content (g/g), increasing in ratio from 1:1 to 20:1, are discussed with a complete chemical, structural, and …

A Study Of Hygrometer Based On The Method Of Intracavity Laser Absorption, Abdulaziz Muminovich Nazarov Prof, Mirkomil Mirhidoyat Ogli Xasanov

Chemical Technology, Control and Management

The article presents the results of experimental studies of a fiber-optic humidity sensor, the principle of operation of which is based on the method of intracavity laser absorption. A method of intracavity laser absorption is described, which makes it possible to dramatically increase the sensitivity of the fiber humidity sensor by switching to it. A schematic diagram of a fiber optical humidity sensor using a differential detection scheme and a design of an active ring laser fiber consisting of a diode pump laser, a fiber pump beam splitter, two directional couplers, a measuring ring laser, a ring comparison laser, two …

Bimetallic Catalyst For Lignin Depolymerization, Qishen Lyu

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis is motivated by concerns regarding the need to develop more sustainable and economic technologies to meet rising global manufacturing and energy demands. These concerns have renewed governmental, industrial, and societal determination to reduce the world’s dependence on conventional natural resources and has led to considerable research on producing fuels and chemicals from feedstocks other than petroleum. Lignocellulosic biomass represents an abundant and renewable resource that could displace petroleum feedstock producing biofuels and multiple valuable chemical products with reduced greenhouse gas emissions. Lignin is the second abundant biopolymer source in nature and is found almost everywhere. Since the 1950’s, …

Exploration Of The Sludge Biodiesel Pathway, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater sludge is an overlooked source of fat, oil, and grease (FOG) that could be converted into biodiesel. The United States produces about 8 million tons of sludge per year. The disposal cost for this amount of sludge is about 2 billion US dollars. The widespread availability and low cost of sludge compared to other biodiesel raw materials make it an economical choice for a renewable fuel. Using sludge as a raw material can produce 25 to 30 mg per gram of fatty acid methyl ester (FAME); the main component of biodiesel. Sludge biodiesel has the potential of transforming a …

2020-21 Aiche Student Design Competition: Naphtha Processing, Brenna Kathleen Flynn, Hannah Orebaugh, Paul Deaton

Honors Capstone Projects and Theses

No abstract provided.

Economic Feasibility Of Mixed Plastic Waste Pyrolysis Using Twin Reactor System In Northwest Arkansas, Carol Rogers, Patricia Means, Renato Gonzalez, Kaida Sheets, Hayden Townsend

Chemical Engineering Undergraduate Honors Theses

Plastic waste generation is increasing at an unsustainable rate while recycling solutions remain stagnant. As a chemical means of recycling, mixed plastic waste pyrolysis can generate synthetic oil appropriate for use as fuel in power generation from plastic waste that otherwise accumulates in landfills. With the scaling of a commercial plastic pyrolysis process in Northwest Arkansas (NWA) modeled after an operational sawdust pyrolysis unit in Huntsville, Arkansas, economic analysis resulted in 26.3% internal rate of return. Therefore, construction of a commercial mixed plastic-to-fuel pyrolysis plant is economically justified and should be pursued. To effectively implement the proposed design, NWA must …

Household Income And Air Pollution At Public Schools In The United States, Katyland Facas, Kristina Wagstrom

Honors Scholar Theses

Poor air quality at schools may negatively impact students’ academic performance.1 2 3 In this study we look at the relationship between ambient, outdoor air quality and student socioeconomic status at United States public schools. We used free and reduced lunch eligibility, as part of the USDA’s National School Lunch Program, as an indicator of household income. We focus on nitrogen dioxide (NO2), ozone (O3), and particulate matter smaller than 2.5 microns (PM2.5). We used ambient pollutant concentration estimates at census block group resolution (Kim et al.) as the outdoor air pollution concentration at each school.4 We found a positive …