Complex Fluids Commons^™

Principles Of Eliminating The Impact Of Disturbances On Integrated Information And Analytical Systems, Orifjon Olimovich Zaripov, Umidjon Sharabidinovich Hamrakulov, Fatima Faxritdinovna Isxakova

Chemical Technology, Control and Management

Today, production management using integrated information and analytical systems and their integration with the elements of Industry 4.0 is considered one of the most pressing problems in all areas of production. The correct formation of the structure of information systems in their development contributes to the formation of elements of Industry 4.0 and their further full and high-quality integration into other areas. When implementing these processes, one of the most important steps is to reduce the impact of disturbances on integrated information and analytical systems. Taking into account the above, the article considers mathematical models of the principles of eliminating …

Investigative Study Of Microalgal And Electrochemical Wastewater Treatment Systems And Modeling Of The Wafer-Enhanced Electrodeionization Using Supervised Learning, Humeyra Betul Ulusoy Erol

Graduate Theses and Dissertations

Wastewater has a serious impact on environment and public health due to its high concentration of nutrients and toxic contaminants. Without proper treatment, excess nutrients discharged in wastewater can cause a damage to the ecosystem such as undesirable pH shifts, cyanotoxin production, and low dissolved oxygen concentrations.

Main objectives of this dissertation work were to investigate i) the biofuel potential of P. cruentum when grown in swine wastewater, ii) the influence of four most commonly used ion exchange resins on the system efficiency and selectivity for the removal of sodium, calcium, and magnesium ions, and iii) the modeling of wafer-enhanced …

Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil

Electronic Theses and Dissertations

Colloids are suspensions of two or more phases and have been topics of research for advanced, tunable materials for decades. Stabilization of colloids is typically attributed to thermodynamic mechanisms; however, recent studies have identified transport or entropic mechanisms that can potentially stabilize a thermodynamically unstable colloidal system. In this study, suspensions of silsesquioxane microparticles and zirconia nanoparticles were dispersed in a nitric acid solution and allowed to aggregate for 8-12 days in microgravity aboard the International Space Station. The suspensions were subsequently imaged periodically at 2.5x magnification. Due to the inadequacy of existing image analysis programs, the python package “Colloidspy” …

Synthesis Of Control Systems For Multidimensional Dynamic Objects Under Parametric Uncertainty Based On The Invariance Theory, U.F Mamirov

Chemical Technology, Control and Management

The problems of synthesis of control systems for multidimensional dynamic objects in the conditions of parametric uncertainty which are based on invariance theory are considered. When constructing stable synthesis algorithms, a recurrent method for determining pseudo-solutions of linear algebraic systems of equations is used. Computational algorithms for the solution based on singular matrix expansions are given. These computational procedures allow us to regularize the problem of synthesis of the considered algorithms for the synthesis of control systems for multidimensional dynamic objects under conditions of parametric uncertainty and improve the quality indicators of control processes.

Intellectual Educational Technologies Of Coherent Maintenance Of Digital Transformations, Igor Ivanovich Gancherenok, Ulugbek Mannanov, A.G. Davydovsky, Yu.A. Chernyavsky

Chemical Technology, Control and Management

The problems of forming adequate educational technologies and supporting digital transformations for the formation and development of relevant professional competencies as innovative receptivity are interpreted. The fundamental principles of educational technologies that act as a catalyst for educational innovations in the context of digital transformation of economic and social processes are described. The main modern educational platforms of educational support of professional activity are analyzed. The author's interpretation of the synergetic effects in the education system, as well as loans as an educational cryptocurrency is suggested.

Estimating The Bubbling Process Of Ozone-Containing Gases In The Water, M.P. Parpiev, А.А. Simonov, Aleksey Kamardin, Abdulaziz M. Nazarov

Chemical Technology, Control and Management

Theoretical estimates were made and significant factors of dissolution of ozone-containing gases in water during bubbling in tanks were determined. The expediency of using microbubbles for more efficient saturation of water and aqueous solutions with ozone and generation of ozone with maximum concentration is shown. It is shown that when bubbling gas in water, including ozone-containing gas, the most important indicator is the volume gas content, which determines the ratio of the volume of the gas phase to the volume of the gas-liquid mixture in the contact apparatus. In the presence of a set of bubbles in the water, the …

To Increasing The Absorption Area Of Column Apparatus With Tubular Lattice Nozzles, Nurmukhamedov Habibulla Sagdullaevich, Batir Babatulaev, Elbek Mavlanov, Samukdjan Nigmadjanov

Chemical Technology, Control and Management

The problem of creating a compact refrigeration zone for absorbers with tubular-lattice nozzles made of pipes with spiral turbulators is discussed. Research has been carried out on the influence of the groove depth h/D and α/α_гл of the step of their placement t/D on the degree of heat transfer intensification α/α_о in the transition region of the gas-liquid flow. An intensification of heat transfer has been achieved only by increasing the groove depth from h/D = 0,003 to 0,095 and the optimal pitch of the grooves, the intensity of heat transfer is 2 or more times. Research has …

Study Of The Rheological Properties Of The Suspension Formed During The Production Of Caustic Soda By The Lime Method, Aktam Ulashovich Erkaev, Dildora Tursunova

Chemical Technology, Control and Management

The process of obtaining sodium hydroxide - caustic soda by conversion of soda ash with lime milk in the presence of natural mirabilite - has been investigated. The influence of temperature, Na₂CO₃: Na₂SO₄ ratio, concentration of lime milk and duration of the conversion process on this process was studied by identifying their optimal values. The study of the rheological properties of the reaction pulp showed that it is mobile and well filtered, which makes it possible to obtain rapidly settling large crystals of Na₂CO₃·2Na₂SO₄, Na …

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva

Chemical Technology, Control and Management

The main goal of this work is to obtain a preparation of acetamizole based on local raw materials by a more convenient method of acylation of 2-methoxycarbonylaminobenzimidazole with glacial acetic acid, this synthesis method is proposed for the first time. On the basis of the conducted experiments, favorable conditions for the reaction were found, the influence of the nature of the acid, the temperature, the duration of the reaction and other factors on the course of the reaction was studied, the technology was developed and implemented at the experimental production of "IHRV AN RUz". Based on experiments conducted by scientists …

Mathematical Model Of A System For Controlling And Diagnosing The Safety State Of Oil And Gas Territory, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Gayrat Bakhtiyarovich Tadzhitdinov, Sherzod Kholmuminovich Eshkuvatov

Chemical Technology, Control and Management

In this article, the way of creation mathematical model of a control system and diagnostics of the security status of the oil and gas territory is considered. For performing diagnostics of the safety of a status of the oil and gas territory as a mathematical apparatus it is suggested to use a boolean algebra. The main controlled objects and their technological parameters which define safety, integrity of saving, operational carrying out monitoring status as separate objects and all oil and gas territory, prediction of the expected threats, economic social, and economic damage are selected. For the creation of a mathematical …

Mathematical Models Of New Magnetoelastic Sensor For Measure Of Power And Vibration Parameters, Javhar Sulton Ugli Fayzullayev

Chemical Technology, Control and Management

In the paper, the mathematical models of the new magnetoelastic sensor for measuring power and vibration parameters are developed taking into account the aggregation or scattering of the parameters of electromagnetic chains and the characteristics of the magnetization curve of the magnetic conductor material. The analysis of the generated mathematical models and graphs based on them showed that the magnetic chain in which the coils are assembled does not take into account the nonlinearity of the magnetization curve of the magnetic conductive material (electrotechnical steel), the result is 12 ÷ 15% of the experimental results. It varies by 6 ÷ …

Methodology For Determination And Assessment Of Uncertainty Sources Of Textile Materials Total Thermal Resistance, Abdurauf Abdurashidovich Abdukayumov, Ortagoli Sharipovich Hakimov

Chemical Technology, Control and Management

The problems of improving of methods for determination of the total thermal resistance of textile materials are considered. A comparative analysis of the applied methods based on stationary and non-stationary heat exchange is performed. A higher accuracy of non-stationary methods based on measuring the cooling time of a heat cell with subsequent determination of the cooling rate and the total thermal resistance of the material under study is noted. A method is proposed for estimating the variance of the main values required for calculating the total thermal resistance of materials. The results of the study of the relationship between sources …

Analysis Of Consistency Of Similarity Predicates To Measures Of Similarity And Advantages Of Their Application In Digital Systems For Solving Intellectual Problems, Makhmudjon Abdullaev, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The results of the analysis of the correspondence of similarity predicates to similarity measures used in various metric methods used for signal classification and the feasibility of using similarity predicates in the construction of digital systems for solving intellectual problems, for which the simplification of computational operations is of no small importance, are presented. Some general and distinctive features of the similarity predicate are considered in comparison with the euclidean metric in relation to one-dimensional and two-dimensional spaces, and generalized to the case of n-dimensional metric spaces. The expediency of using methods based on the calculation of similarity predicates, which …

Relating Modified Ergun's Equation To Hindered Settling Correlations, Ryan Zahniser

Williams Honors College, Honors Research Projects

Correlations were developed between the Modified Ergun’s and Hindered settling correlations under the condition of dense packing of particles in the bed. As the porosity of the slurry increases, so does the interference between particles in the solution which mimics the behavior of a packed or densely concentrated fluidized bed. The similarity between the two sets of conditions was modeled using mathematical equations to calculate settling velocities and pressure drops by means of the Hindered Settling correlations and Modified Ergun’s equation at porosities ranging from 0.4242 to 0.89. The results showed that a porosity of 0.52 and 0.009 ft particle …

Modeling Residence Time Distribution Of Chromatographic Perfusion Resin For Large Biopharmaceutical Molecules: A Computational Fluid Dynamic Study, Kevin Vehar

KGI Theses and Dissertations

The need for production processes of large biotherapeutic particles, such as virus-based particles and extracellular vesicles, has risen due to increased demand in the development of vaccinations, gene therapies, and cancer treatments. Liquid chromatography plays a significant role in the purification process and is routinely used with therapeutic protein production. However, performance with larger macromolecules is often inconsistent, and parameter estimation for process development can be extremely time- and resource-intensive. This thesis aimed to utilize advances in computational fluid dynamic (CFD) modeling to generate a first-principle model of the chromatographic process while minimizing model parameter estimation's physical resource demand. Specifically, …

Flow Patterns, Velocity Distributions And Mixing Time In Stirred Tank Reactor Under A Range Of Operating Conditions, Nor Haslina Abdullah

Student Works (2020-2029)

The present work employed a two-dimensional Particle Imaging Velocimetry (PIV) technique to determine the flow patterns and velocity distributions of a down-pumping pitched-blade turbine (4PB) and a Rushton turbine (RT) in a flat-bottom fully baffled stirred vessel (T=0.155m) using distilled water and glycerin as liquids. Fluid velocities increased as the impeller speed increased from 50rpm to 300rpm for both fluids and the RT impeller reached a maximum value of velocity of 1.42m/s at the blade tip. The 4PB had higher velocity compared to RT in glycerin, but RT had higher velocity than 4PB in distilled water. In water, radial flow …

An Improved Foam Modeling Technique And Its Application To Petroleum Drilling And Production Practice, Yanfang Wang

LSU Doctoral Dissertations

Foam is one of the most common used multiphase fluid in Underbalanced Drilling (UBD) and Managed Pressure Drilling (MPD). Because of its low density, high capacity of lifting and carrying cuttings, low cost and compatibility with formations, foam has become more superior than the conventional drilling mud when depleted reservoir pressure, severe lost circulation, or unstable borehole are encountered. In general, the success of foam applications rely on the understanding of the fundamentals of foam rheology in downhole conditions.

Foam rheology has been studied for decades. Conventional foam rheological models such as Power Law, Bingham Plastic, Herschel-Bulkley to explain foam …

Preparation Characterization And Tribological Behavior Of Lube Oil With Nanoparticles Additives, Waleed Alghani

Student Works (2020-2029)

There are many companies worldwide that would like to improve and upgrade the lube oil and enhance its performance. There is a big concern for the enhancement of lube oil by using nanotechnology and more precisely with using nanomaterial additives. Much work has made to explore and develop new sorts of lubricating oil nano-additives to diminish wear and friction in tribological configurations and to enhance surface morphology. It has noted that the use of dual nano-additives should examine the lubricating capacity and durability of lubricant. (TiO2 Anatase + Graphene) and (ZnO + Graphene) nanoparticles have selected to formulate nano-additives that …

Process Improvement And Microbial Characterisation Of Biological Nitrogen Removal For Tropical Wastewater With Low Chemical Oxygen Demand/Nitrogen Ratio, How Seow Wah

Student Works (2020-2029)

Malaysia has one of the most established biological nitrogen removal in wastewater treatment plants (WWTPs) among the developing Southeast Asian countries. The current WWTPs’ design and operating guidelines in Malaysia are mainly derived from other developed countries with more experiences in operating biological nitrogen removal. These design guidelines are good practices for WWTPs in the temperate climate region, but may not be optimal for the local wastewater characteristics and tropical climate in Malaysia. The local wastewater industry is keen to improve the design and operation of WWTPs to reduce the energy consumption and operating cost, which helps to foster a …

Fractionation And Characterization Of Extracted Lignin From Oil Palm Empty Fruit Bunch Using Synthesized Deep Eutectic Solvents, Tan Yee Tong

Student Works (2020-2029)

Deep eutectic solvent (DES), a new generation green solvent has been introduced as an alternative pretreatment solvent due to its ability for lignocellulosic biomass fractionation and lignin extraction. Numerous types of compounds can be adopted as DES constituents, which has resulted in abundant variation of DES with varying properties. Selection of the suitable chemical compound category is therefore essential for optimum DES performance. However, investigation on the performance comparison between the different DES categories is lacking. In addition, despite its widely acknowledged effectiveness in biomass fractionation, the properties of DES-fractionated biopolymers, especially lignin are not well understood. Hence, this project …