Catalysis and Reaction Engineering Commons^™

Assembling Of Niox/Mwcnts-Gc Anodic Nanocatalyst For Water Electrolysis Applications, Yaser M. Asal Mr., Islam M. Al-Akraa Dr, Saher D. Khamis Eng

Chemical Engineering

Glassy carbon (GC) electrode is intended to be modified with nickel oxide (NiOx) and multiwalled carbon nanotubes (MWCNTs) in the anodic reaction of water electrolysis. NiOx deposition time is optimized and a 5 min was enough to attain the maximum activity. A further modification of the catalyst with MWCNTs could greatly enhance its stability during continuous electrolysis. As an outcome, an energy amount of 21.7 kWh/KgO₂ is minimized. Several electrochemical and materials characterization setups will be utilized to test the catalyst activity and to know its geometry and structure.

An Aqueous All-Metal Oxide Asymmetric Supercapacitor With High Gravimetric And Volumetric Energy Densities, Xin Jing, Xu Zhang, Wei Wang, Jun-Wei Lang

Journal of Electrochemistry

Only with both high gravimetric and high volumetric energy densities, can supercapacitors find more extensive applications.In this paper, by making good use of the interesting nanostructures and the high packing densities of RuO₂ (nanoshpheres,1.69 g·cm^-3) and Co-Ni oxide (nanoflakes, 2.14 g·cm^-3), the RuO₂//KOH//Co-Ni oxide all-metal oxide asymmetric supercapacitors with high performance were successfully fabricated, which led to the maximum specific capacitance of 217.5 F·g^-1 (412.3 F·cm^-3) and specific energy density of 61.8 Wh·kg^-1 (121 Wh·L^-1) in a cell voltage between 0 and 1.5 V in KOH electrolyte. …

Electrochemical Performances Of Neodymium Doped Lead Dioxide Composite Anode, Hong-Hui Wang, Ming-Jie Ma, Jie Feng, Huang-Ya Kang, Wen-Jie Huang

Journal of Electrochemistry

Neodymium (Nd) doped titanium (Ti)-based lead dioxide (PbO₂) composite anode was prepared by electrodeposition. The surface morphologies and crystal structures of the as-prepared anodes were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) technique, respectively. The electrochemical performances of PbO₂-Nd anode were studied by electrochemical impedance spectroscopy, linear sweep voltammetry and cyclic voltammetry. Additionally, the electrocatalytic activity and durability of PbO₂-Nd anode were investigated through the degradation of simulative refractory organic wastewater of phenol. The results showed that Nd doping made the PbO₂ anode surface structure dense and uniform with smaller …

Highly Crystalline Nickel Borate Nanorods As Oxygen Evolution Reaction Electrocatalysts, Xi Xu, Juan Liu, Hua-Zong Wu, Wen-Jie Jiang

Journal of Electrochemistry

Hydrogen energy, a kind of clean and renewable energy, is considered to be the solution to the problems of energy crisis and environmental deterioration. Electrochemical water splitting is an efficient and promising technology for the production of high-purity hydrogen. However, oxygen evolution reaction (OER) at the anode of water electrolyzer limits the efficiency of water splitting due to the high overpotential. Therefore, the challenges still remain for the exploration of highly active, stable and low-cost catalysts with superior activity for OER. Herein, nickel borate nanorods with high crystallinity were prepared via high-temperature calcination. The as-obtained nickel borate nanorods with 2 …

Fabrication Of Mnox/Mwcnts-Gc Nanocatalyst For Oxygen Evolution Reaction, Yaser M. Asal Mr, Islam M. Al-Akraa Dr, Amr M. Arafa Eng.

Chemical Engineering

Manganese oxide (MnOx) and multiwalled carbon nanotubes (MWCNTs) are intended to modify the GC electrode for oxygen evolution reaction (OER). Optimization of MnOx loading is carried out and the deposition of 55 cycles was sufficient to obtain the highest activity toward OER. The stability of the catalyst is enhanced by the addition of MWCNTs. As a result, an amount of 22 kWh/Kg of O₂ of energy is saved. Several techniques including cyclic voltammetry, linear sweep voltammetry, chronoamperometry, chronopotentiometry, field-emission scanning electron microscopy, and energy dispersive X-ray spectroscopy will be combined to track the catalyst activity and to determine its …

Identification Of Proximal And Isolated Aluminum Heteroatoms In Zeolites By Infrared Spectroscopy, Melanie A. Brunet Torres, Philip Kester, Rajamani Gounder

The Summer Undergraduate Research Fellowship (SURF) Symposium

High demand for energy production and limited fossil fuel reserves are two factors that motivate intense research for new alternative energy resources. While we are still far from completely moving to renewable energy solutions, a new solution that replaces crude oil and coal with shale gas is currently under investigation. For this modern technology, new zeolite catalysts need to be developed for the conversion of light hydrocarbons gases to liquid transportation fuels. These catalysts are of special interest in the production of liquid fuels since they exhibit high reaction rates, molecular sieving properties and selectivity behavior. In this work, the …

Platinum-Gallium (Pt-Ga) Intermetallic Alloys For Propane Dehydrogenation, Brittany K. Roopnarine, Nicole J. Libretto, Johnny Zhuchen, Zhenwei Wu, Evan Wegener, Griffin Canning, Abhaya K. Datye, Jeffrey T. Miller

The Summer Undergraduate Research Fellowship (SURF) Symposium

Natural gas is a source of energy for the United States. The Center for Innovative Strategic Transformation of Alkane Resources (CISTAR) plans to use shale gas extracted from shale rock formations as a bridge fuel to replace coal and oil while the US transitions to renewable energy like solar and wind. After methane, the largest components in shale gas are light alkanes such as ethane and propane. These can be catalytically converted to olefins, which can be further reacted to produce fuels, for example. Olefins from alkanes can be accomplished by dehydrogenation by promoted platinum alloys. This study compares the …

Investigation Of The Effects Of Solid-State Treatments On The Structure And Mobility Of Copper In Zeolites, Jiayang Wu, Laura Wilcox, Rajamani Gounder

The Summer Undergraduate Research Fellowship (SURF) Symposium

Zeolites are microporous, aluminosilicate catalysts that play an important role in industrial applications as well as studies for the fundamental understanding of catalysts for emerging reactions of interest. The introduction of aluminum into the zeolite lattice introduces a negative charge on the framework that can be balanced with extra-framework cations. The control of the aluminum distribution and the choice of charge balancing cations allows for the ability to tailor the active sites to facilitate a desired reaction. This research focuses on studying copper active sites in zeolites. Copper oxide was used as a copper precursor to introduce copper ions in …

Computational Catalysis: Creating A User-Friendly Tool For Research And Education, Kevin P. Greenman, Peilin Liao

The Summer Undergraduate Research Fellowship (SURF) Symposium

Catalysis is used in a significant portion of production processes in the industrialized world, including most processing of chemicals and fuels. This makes maximizing the efficiency of catalysts a high priority. However, the immense number of candidates for new catalysts precludes the possibility of testing all of them by experiments. Density functional theory (DFT) has been widely and successfully used to calculate material properties relevant to catalysis and to screen promising candidates for experimental testing, but there currently exists no publicly- available, user-friendly tool for performing these DFT calculations. This work details the development of such a tool for nanoHUB.org …

Scaling Relationships Across Chemically Related Adsorbates For Fast Screening Of Alloy Catalysts For Propane Dehydrogenation, Anne Esther Serban, Ranga Rohit Seemakurthi, Brandon C. Bukowski, Jeffrey Greeley

The Summer Undergraduate Research Fellowship (SURF) Symposium

A catalyst is a material which speeds up the rate of a specific reaction. A reaction that is of significant importance to the chemical industry is the selective transformations of light alkanes (ethane, propane), which are largely available in shale gas, to olefins. These olefins can then be converted into higher-value chemicals, materials, and fuels. However, there are several undesired reactions that take place alongside the main dehydrogenation reaction, so a catalyst of high selectivity is desired. Apart from the industrially used PtSn catalyst, work by our experimental collaborators has shown that various other Pt and Pd alloys (In, Zn) …

Electrocatalytic Properties Of Ni-Fe Basedalloys Toward Oxygen Evolution Reaction, Xiaodan Cui

LSU Doctoral Dissertations

In this dissertation, laser-based manufacturing was applied to develop NiFe-based alloys, with focus on their electrochemical characteristics toward oxygen evolution reaction during water electrocatalysis. The targeted electrocatalysts were designed by combining catalysis principles of absorption energy, electronic effect and geometry effect. Firstly, a one-step laser-based manufacturing method was applied to prepare a thin layer of NiFe-based electrodes with varied Ni to Fe ratios to replace high-cost noble metals as the electrocatalyst for oxygen evolution reaction (OER). Since each Ni has 0.6 d-vacancy and each Fe atom has 2.2 d-vacancies. The alloying of Ni-Fe allows electrons flowing from Ni to Fe, …

Chemical Stability Investigations Of Catalyst Layer In Pemfc, Yan-Yan Gao, Ming Hou, Yong-Yi Jiang, Dong Liang, Jun Ai, Li-Min Zheng

Journal of Electrochemistry

This work was intended to study the effect of free radicals on the chemical stability of catalyst layer via ex situ accelerated stress test (AST). Fenton reagent was used as the free radical provider in this research. Apart from the decomposition of Nafion in catalyst layer, the agglomerated Pt nanoparticles and the corroded carbon support were also observed after being treated in Fenton reagent for 100 h. Firstly, the existence of fluoride (F) ions evidenced the chemical decomposation of Nafion after being attacked by trace radical species, which was supported by the intensity decrease in the C-F stretching and vibration …

Recent Progress For Fe-N-C Electrocatalysts In Alkaline Fuel Cells, Xin Deng, Heng-Quan Chen, Ye Hu, Qing-Gang He

Journal of Electrochemistry

Fuel cells are highly recommended nowadays due to their intrinsic advantages such as high energy conversion efficiency, nearly no pollution, and convenient operation. With the development of anion exchange membrane, alkaline fuel cells have gone through a renaissance thanks to their superiorities such as faster reaction kinetics, wider choices for both fuels and electrocatalysts. It is essential to find an appropriate electrocatalyst for oxygen reduction reaction (ORR) to improve the performance of alkaline fuel cells. Further commercialization of the widely used Pt-based materials has suffered from disadvantages such as scarcity and high cost. As alternatives to largely investigated Pt-based materials, …

Pt/G-C3N4 Nanosheet For Visible Light-Induced Enhancement Of The Activity For Formic Acid Electro-Oxidation, Yong-Rong Sun, Chun-Yu Du, Guo-Kang Han, Ya-Jing Wang, Yun-Zhi Gao, Ge-Ping Yin

Journal of Electrochemistry

By using graphitic carbon nitride nanosheet (g-C₃N₄ nanosheet) as a support,Pt/g-C₃N₄ nanosheet catalyst was fabricated by microwave assisted polylol process. The nanoparticles size,composition,structure and optical properties of Pt/g-C₃N₄ nanosheet were characterized by TEM,XRD,XPS and UV-Vis diffuse reflectance spectroscopy. Comparing with the catalytic activities toward formic acid electro-oxidation under dark and visible light illumination,the superior activity of Pt/g-C₃N₄ nanosheet catalyst was achieved under visible light illumination. This visible light-driven enhancement in the formic acid performance could be attributed to the plasmon-induced electron-hole separation on g-C₃N₄ with …

Carbon Composite Fe3O4 Nanoparticles Based Electrochemical Sensor For Hydrogen Peroxide Detection, Si-Yu Zhang, Hui-Juan Wang, Shu-Fang Li, Jian-Ying Qu

Journal of Electrochemistry

In this work, a novel hydrogen peroxide electrochemical sensor was constructed with ferroferric oxide (Fe₃O₄) magnetic nanoparticles, which demonstrated good electrocatalytic activity for hydrogen peroxide. There existed a good linear relationship between the concentration of hydrogen peroxide and the oxidation peak current in the range of 1.00 × 10^-6 ~ 1.00 × 10^-3 mol·L^-1 (R = 0.9980) with the detection limit of 6.60 × 10-7 mol·L^-1. The sensor exhibited good anti-interference ability, high reproducibility and stability.

Lead Modified Nanoporous Platinum Electro-Catalysts For Formic Acid Oxidation, Yuan-Yuan Zhang, Qing-Feng Yi, Ge-Kun-Kun Zuo, Tao Zou, Xiao-Ping Liu, Xiu-Lin Zhou

Journal of Electrochemistry

Platinum (Pt) catalysts modified by other suitable metals significantly enhance their electrochemical activities for formic acid oxidation. In this work, a titanium-supported nanoporous network platinum (nanoPt/Ti) electrode was prepared using a hydrothermal method. The as-prepared nanoPt/Ti electrode was modified with a certain amount of lead by using cyclic voltammetry for different scan cycle numbers (n), namely, n = 10, 15, 20 and 30, to synthesize the novel lead-modified nanoporous Pt (nanoPb_(n)-Pt/Ti) electrodes. Electro-oxidation of formic acid on these electrodes was studied with cyclic voltammetry (CV), chronoamperometry and chronopotentiometry in sulfuric acid solution. CV curves showed that both nanoPt/Ti …

Increased Energy Yield Through Fast Pyrolysis: Empowering Malawian Villages, Diehl Mutamba

Undergraduate Honors Theses

Biomass contributes to several renewable energy technologies. This project will explore the use of fast pyrolysis to produce fuels by designing an apparatus for fast pyrolysis. Malawian people harvest firewood from the forests, which is a major contributor to deforestation. Furthermore, they convert some of it to charcoal with about 10-15% efficiency to sell to city dwellers. The project will enable herbaceous fuels to replace wood, increase charcoal yields and create new products. Firewood and charcoal produce smoke and carbon monoxide (CO) that compromises the villagers’ health.

This project will address deforestation problems, improve sustainability, decrease health hazards and improve …

Experimental Evaluation Of Lignocellulosic Biomass Pyrolysis By Dielectric Heating And Thermocatalytic Upgrading Of Pyrolysis Vapors Via Iron-Doped Montmorillonite Clay Catalyst, Candice Raffaela Ellison

LSU Doctoral Dissertations

This work is an investigation of microwave-assisted biomass pyrolysis and thermocatalytic upgrading of pyrolysis vapors. In the first two chapters, the microwave susceptibility of mixtures of biomass with potential microwave absorbers are characterized by dielectric measurements at microwave frequencies. Dielectric constant and dielectric loss factor of biomass mixtures with char and biomass mixtures with bentonite are found to increase quadratically with increasing weight percent of char or bentonite.

Chapter 3 presents a finite element model, developed in COMSOL Multiphysics, comparing two waveguide applicator configurations for microwave processing using biomass as a model material. A standing wave configuration results in intense …

Method Of Increasing Mass Transfer Rate Of Acid Gas Scrubbing Solvents, Cameron Anthony Lippert, Kunlei Liu, Christine Marie Brandewie, Joseph Eugene Remias, Moushumi Sarma

Center for Applied Energy Research Faculty Patents

A method and catalysts for increasing the overall mass transfer rate of acid gas scrubbing solids is disclosed. Various catalyst compounds for that purpose are also disclosed.

Addition Of Exothermic Reaction Scale-Up Lab To Unit Operations Curriculum., Lisa A Anderson

Electronic Theses and Dissertations

According to the Chemical Safety Board’s 2002 report entitled "Improving Reactive Hazard Management,” the CSB identified 167 serious accidents involving uncontrolled chemical reactions in the United States between 1980 and 2001 causing 108 deaths and hundreds of millions of dollars in property damage. Of the 167 accidents, 35% involved runaway reactions. One noteworthy incident from recent history is the fatal explosion that occurred at T2 Laboratories in Jacksonville, FL as a result of improper scale-up and an insufficient cooling design for the system.

One recommendation resulting from the CSB investigation of the incident was that the Accreditation Board for Engineering …