Biochemical and Biomolecular Engineering Commons^™

The Yin And Yang Actions Of North American Ginseng Root In Modulating The Immune Function Of Macrophages, Chike Godwin Azike, Paul Abrahams Charpentier, Jirui Hou, Hua Pei, Edmund Man King Lui

Physiology and Pharmacology Publications

BACKGROUND: Immuno-modulatory effects of ginseng, including both immuno-stimulatory and immuno-suppressive effects, have been widely reported. This study aims to determine whether the paradoxical immuno-modulatory effect is related to unique phytochemical profiles of different North American (NA) ginseng, namely aqueous (AQ) and alcoholic (ALC) extracts.

METHODS: AQ and ALC extracts were prepared and their immuno-bioactivity were studied in vitro in murine macrophages (Raw 264.7) through measuring the direct stimulatory production of pro-inflammatory mediator and cytokines as well as the suppression of lipopolysaccharide (LPS)-stimulatory response by the two extracts. Gel permeation chromatography was used to fractionate and isolate phytochemicals for characterization of …

Epoxy/Pcl/Cnf Nanocomposite Towards Electrically Triggered Self-Healing And Reversible Adhesion, Lawrence Matthew Levy

Renée Crown University Honors Thesis Projects - All

In this report, we summarize the results of research related to development of an electrically-triggered reversible-adhesive material. The material is made of an epoxy comprised of diglcidyl ether of bisphenol-A (DGEBA) and 4,4’-diaminodiphenylsulfone (DDS). By combining the epoxy with PCL a “bricks and mortar” morphology is created with reversible adhesion properties. A phenomenon known as differential expansive bleeding (DEB) is the driving force of the self-healing and reversible-adhesion. The epoxy/PCL was embedded within electrically conductive carbon nanofibers (CNF) created from electrospun poly(acrylonitrile) (PAN). The material’s high conductivity allowed convenient heating with a power source. Initial tests revealed a lack of …

De Novo Gene Synthesis By Rapid Polymerase Chain Assembly Coupled With Immunoaffinity Purification: A Novel Process And Workstation, Joel R. Termaat

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

The de novo synthesis of genes is emerging as a powerful tool in biotechnology. The ability to synthesize genes of any desired sequence opens the door to seemingly unlimited research possibilities. Major advances have been made recently in de novo gene synthesis, with Polymerase Chain Assembly (PCA) routinely used to construct functional sequences from short single-stranded oligonucleotides. However, current PCA techniques are lacking in speed and fidelity. Additionally, substantial undesired reactants/products are present in the final reaction. A novel process and accompanying workstation has been developed that incorporates rapid PCA synthesis coupled with subsequent affinity purification of the synthesis mixture. …

Leaching Of Potential Hazardous Elements Of Coal Cleaning Rejects, Luis F.O. Silva, Maria Izquierdo, Xavier Querol, Robert B. Finkelman, Marcos L.S. Oliveira, Marcus Wollenschlager, Mark R. Towler, Rafael Pérez-López, Felipe Macias

Chemical and Biochemical Engineering Faculty Research & Creative Works

The geochemical characteristics of coal cleaning rejects (CCR) in Santa Catarina State, Brazil, were investigated. Around 3.5 million ton/ year of coal waste are dumped in Santa Catarina State. Coal beneficiation by froth flotation results in large amounts of CCR composed of coaly and mineral matter, the latter characterized by the occurrence of sulphide minerals and a broad array of leachable elements. The total and leachable contents of more than 60 elements were analyzed. Atmospheric exposure promotes sulphide oxidation that releases substantial sulphate loads as well as Ca²⁺, K⁺, Mg²⁺, Cl- and Al^{3+ …}

Hemocompatibility Of Silicon-Based Substrates For Biomedical Implant Applications, Lingyan Liu

Chemical, Biomolecular, and Corrosion Engineering Faculty Research

Silicon membranes with highly uniform nanopore sizes fabricated using microelectromechanical systems (MEMS) technology allow for the development of miniaturized implants such as those needed for renal replacement therapies. However, the blood compatibility of silicon has thus far been an unresolved issue in the use of these substrates in implantable biomedical devices. We report the results of hemocompatibility studies using bare silicon, polysilicon, and modified silicon substrates. The surface modifications tested have been shown to reduce protein and/or platelet adhesion, thus potentially improving biocompatibility of silicon. Hemocompatibility was evaluated under four categories—coagulation (thrombin–antithrombin complex, TAT generation), complement activation (complement protein, C3a …

Verification And Validation Of Cfd Simulations For Local Flow Dynamics In A Draft Tube Airlift Bioreactor, Hu Ping Luo, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Airlift Reactors Have Been Recognized as One of the Promising Photobioreactors for Biomass/bio-Energy Production, Where Mixing Has Significant Impact on the Reactor Performance. in Recent Years, using CFD Simulations to Track Microorganism Cells and to Generate their Trajectories in the Reactor for Reactor Performance Evaluations Becomes More Common. However, there is a Lack of Systematic and Rigorous Verifications and Validations of the Reliability of CFD Models in Particle Tracking Against Experimental Measurements in the Open Literature, Which is Vital for the Faithful Application of CFD in Reactor Design and Scale-Ups. in This Work, We Attempt to Evaluate the Reliability of …

The Structural Role Of Titanium In Ca-Sr-Zn-Si/Ti Glasses For Medical Applications, A. W. Wren, F. R. Laffir, A. Kidari, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glasses for medical applications are used in particulate form or as a cement component. This work was undertaken to determine structural changes in 0.48SiO₂-0.36ZnO-0.12CaO-0.04SrO glass when the SiO₂ is substituted with 5 mol% increments of TiO2. X-ray Diffraction (XRD) was used to determine the presence of crystallinity. This occurred after additions of 20 mol% TiO₂. Differential Thermal Analysis (DTA) and Network connectivity (NC) calculations determined that by increasing the TiO₂ content, the T_g and NC reduced (T_g 670 °C to 632 °C, NC 1.83 to -1.14) suggesting that TiO₂ acts as …

Flow Regime Identification In A Bubble Column Via Nuclear Gauge Densitometry And Chaos Analysis, S. Nedeltchev, A. Shaikh, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Bubble Column Performance Can Change Significantly as a Result of Flow Regime Change. Since Reactor Volume Productivity, Mass and Heat Transfer as Well as Mixing Are Affected by the Prevailing Flow Regime, It is Very Important to Know How to Identify It. in This Work, Flow Regime Identification Was Performed on the Basis of the Kolmogorov Entropy (KE) Algorithm Applied to Nuclear Gauge Densitometry Data. in Addition, the Average Cycle Time Was Used for Validation of the Results. Three Transition Velocities Were Identified that Delineated the Boundaries of the Three Main Hydrodynamic Regimes. the First Two Transition Points Were …

A Critical Review On Recent Methods Used For Economically Viable And Eco-Friendly Development Of Microalgae As A Potential Feedstock For Synthesis Of Biodiesel, Yogesh C. Sharma, Bhaskar Singh, John Korstad

College of Science and Engineering Faculty Research and Scholarship

Microalgae are being considered as a viable feedstock for large-scale production of biodiesel. However, though it may look simpler to obtain lipids from microalgae, the overall process of choosing an algal strain, cultivation, harvesting, dewatering, and extraction of oil is quite complicated and not economically prudent at this time. A thorough understanding of algae and the overall biodiesel production process discussed in this paper is vital so that focused research might lower the costs involved. Various diverse species of microalgae are currently being used as feedstocks for biofuel. Heterotrophic culture may be preferred over photoautotrophic cultivation. For cultivation, specially fabricated …

The Bioactivity And Ion Release Of Titanium-Containing Glass Polyalkenoate Cements For Medical Applications, A. W. Wren, N. M. Cummins, F. R. Laffir, S. P. Hudson, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The ion release profiles and bioactivity of a series of Ti containing glass polyalkenoate cements. Characterization revealed each material to be amorphous with a T_g in the region of 650-660°C. The network connectivity decreased (1.83-1.35) with the addition of TiO₂ which was also evident with analysis by X-ray photoelectron spectroscopy. Ion release from cements were determined using atomic absorption spectroscopy for zinc (Zn^₂₊), calcium (Ca^₂₊), strontium (Sr^₂₊), Silica (Si^₄₊) and titanium (Ti4+). Ions such as Zn^₂₊ (0.1-2.0 mg/l), Ca²⁺ (2.0-8.3 mg/l,) Sr²⁺ (0.1-3.9 mg/l), and S^{i4+ …}

The Response Of Pseudomonas Aeruginosa Biofilm To The Presence Of A Glass Polyalkenoate Cement Formulated From A Silver Containing Glass, A. Coughlan, M. P. Ryan, N. M. Cummins, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

No abstract provided.

A Novel Biodiesel And Glycerol Carbonate Production Plant, Nghi T. Nguyen, Yaşar Demirel

Yaşar Demirel Publications

Crude glycerol is the byproduct of biodiesel production plant and the economic value of glycerol may affect the profitability of the biodiesel production plant. As the production rate of bioglycerol increases, its market values drop considerably. Therefore, conversion of bioglycerol into value-added products can reduce the overall cost, hence, leading to a more economical biodiesel production plant. In a direct carboxylation reaction, CO₂ reacts with glycerol to produce glycerol carbonate and water. This study presents a direct comparison of the economic analysis of the conventional biodiesel production plant and the possible next generation biodiesel-glycerol carbonate production plant. At the …

Stability Of Affinity Based Layer-By-Layer Polymeric Self-Assemblies For Oral Wound Applications, Sundar Prasanth Authimoolam

Theses and Dissertations--Chemical and Materials Engineering

Oral mucositis is a painful and debilitating chronic inflammatory condition that can result from chemo and/or radiotherapy. While current treatment strategies which provide temporary relief exist, there is still an unmet clinical need for a robust long active barrier strategy which can simultaneously provide protection and release drug to enhance the wound healing response. It is proposed that an affinity based layer-by-layer self-assembled barrier administered as a series of mouth rinses can allow for wound specific drug delivery, providing an effective regenerative therapy.

In this work, biotinylated poly(acrylic acid) is used to develop LBL assemblies based upon biotin-streptavidin affinity interactions. …

Polymer (Su-8) Optofluidic Device With Embedded Hydrogel Oxygen Sensing Elements, Zhan Gao, David B. Henthorn, Chang-Soo Kim

Chemical and Biochemical Engineering Faculty Research & Creative Works

The SU-8 photopolymer is an excellent alternative for traditional materials used in fluidic devices such as glass- or silicon-Based inorganic materials. We describe a new chemically anchored, lithographically patterned hydrogel sensing element embedded in a completed SU-8 fluidic channel structure after the channel bonding process. Polyethylene glycol (PEG) hydrogel films incorporating oxygen-responsive ruthenium-complex fluorophores are grafted and patterned by photopolymerization of solution-phase precursors on the modified SU-8 channel surface. the optofluidic sensing platform with this embedded sensing elements exhibited excellent performance in measuring dissolved oxygen content. a unique advantage of this method is the selective growth of various functional films …

Fibronectin For Use In Hemostats And Wound Stabilization In Trauma, Mohammed Halhouli

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Exploring the phase during wound healing when fibrinogen (FBG) and fibronectin (FN) interact forming a small thin layer for cells to migrate and proliferate at the injury site is necessary for the primary building blocks and initial stages of skin recovery. The aim of this thesis is to illustrate that administrating a reasonable amount of (FN) and FBG, in a semi-organizational technique, to the wound site will encourage cell population and ECM formation, as well as, improve the wound healing process. WE hypothesized that FBG and FN interactions will configure the construction of dermal cells and their final fate to …

Enhancing Oxygen Reduction Reaction Activity Via Pd-Au Alloy Sublayer Mediation Of Pt Monolayer Electrocatalysts, Yangchuan Xing, Yun Cai, Miomir B. Vukmirovic, Wei Ping Zhou, Hiroko Karan, Jia X. Wang, Radoslav R. Adzic

Chemical and Biochemical Engineering Faculty Research & Creative Works

New Pt monolayer electrocatalysts were prepared using galvanic displacement of a copper monolayer deposited at underpotentials on a Pd core. by performing underpotential deposition twice, two monolayers were deposited, forming a core-shell structure with double shells. the double shells consist of an outermost shell of Pt monolayer and a sublayer shell of Pd-Au alloy. It was found that by adjusting the compositions of the alloy sublayer, it is possible to mediate the oxygen reduction reaction (ORR) activity of the Pt catalysts. an alloy with 10% (atomic) Au was found to be the most active among the catalysts tested. Furthermore, the …

Labyrinthine Instability In Thin Liquid Films, P. Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

When a thin liquid film on a solid surface has a thickness corresponding to a particular part the spinodal region of the disjoining pressure versus thickness isotherm, the film breaks down. One of the patterns that emerges on the breakdown has been referred to as wavy instability. It is compared here to the labyrinthine instability seen in magnetic films. the system is modeled following the procedure used in magnetic systems, and the pattern of wavy instability is broken down into a curved thick-thin film in equilibrium with a flat thin-thin film of constant thickness. Minimization of free energy leads to …

Optofluidic Biosensors Based On Color Imaging, Jongwon Park, Chang-Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

A color CCD (charge-coupled device) camera is used as a chemical detector to quantify fluorescence emission intensities from two kinds of optofluidic device platforms. the fluorophores responsive to oxygen are immobilized in photo-patternable hydrogel matrices. the first device is a hydrogel sensor array formed within a commercial silicone elastomer imaging chamber. the second one involves a double-chamber fluidic device composed of a permeable membrane layer and dry film photoresist layers. the results suggest that digital color imagers, in combination with a simple color separation method, can serve as the high-quality chemical detectors for fluidic biosensors and biological culture platforms. © …

Color Intensity Method For Hydrogel Oxygen Sensor Array, Jongwon Park, Wonhak Hong, Chang-Soo Kim

Electrical and Computer Engineering Faculty Research & Creative Works

The oxygen imaging technique to obtain a 2-D distribution is a convenient method because it does not require individual addressing of each sensing element in a sensor array. Until recently, color charge coupled devices (CCDs) have rarely been used for oxygen imaging in spite of usefulness for analyzing the spectral content of images. in this work, a color CCD camera was used for luminescence intensity imaging. Two methods of color intensity analysis are investigated and compared. the first method is to analyze the total Red-Green-Blue (RGB) color intensity of the original color image. the second method involves extracting the red …

Synthesis And Analytical Evaluation Of Folate Conjugates For Use In Cancer Cell Detection, Sneha Reddy Kuthuru

All Capstone Projects

Recent clinical studies have shown the importance of folate receptor in drug delivery system as they increase the potency and reduce toxicity of many cancer therapies. The folate receptor alpha ( FR-a) binds with high affinity for folic acid and serves for receptor mediated transport of folate into cells. Folate is necessary for DNA metabolism and thus it is speculated that rapidly dividing cancer cells have an increased requirement for folic acid. It is known that FR-a levels are elevated in specific malignant diseases (solid tumors, leukemia) and thus the FR receptor serves as useful targeting moiety for the diagnosis …