Biomedical Devices and Instrumentation Commons^™

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

A Wheelchair-Bed Transfer Device For Patients With Limited Mobility, Malachie Nichols

Biomedical Engineering Undergraduate Honors Theses

As the population ages, eldercare becomes more important than ever, yet many caregivers lack the resources they need to safely do their jobs. For those who take care of a disabled loved-one at home or work as home health aides, basic tasks can be frustrating and even dangerous. The high physical demands of moving and lifting patients make injuries common among home health care workers. Musculoskeletal injuries to the back, shoulders, wrists, and hands are especially common. The use of transfer devices such as Hoyer lifts, slide boards, and gait belts help to make moving patients easier and safer, but …

A Proof Of Concept For Detection Of Palato-Lingual Contact Without Intraoral Electrodes In A Human Participant, Amitava Biswas

Master's Theses

The author of this thesis conceived and investigated an unexpected electrical signal that may not be noticed during regular electroglottography (EGG) when electrodes are conventionally placed on the anterior surface of the throat. It appears that there is a measurable electrical signal from the EGG equipment when electrodes are placed over the frontal cheek (belly of zygomatic muscle), and the tongue is elevated to contact the hard palate, or the tongue is lowered to break the contact. Therefore, this phenomenon is designated as unconventional electroglottography (UEGG, Dr. Steven Cloud, private communication, July 17, 2022).

Two distinctive patterns of waveforms were …

Characterizing And Quantifying Shear-Induced Hemolysis In A Hollow Fiber Membrane System, Siddhi Bhat

Chemical Engineering Undergraduate Honors Theses

Clinical studies have shown that patients undergoing renal replacement therapy are more susceptible to developing hemolysis, or the rupturing of red blood cells. Rapid hemolysis can cause symptoms such as anorexia, vomiting, and even death in severe cases. The aim of this study is to identify how shear stress within a hollow fiber membrane impacts the level of hemolysis that occurs. This allows for the optimization of the ultrafiltration membranes that are typically used for hemofiltration treatments. The variables being studied are the radii of hollow fibers, number of fibers, and volumetric flow rate of blood being circulated. Here, we …

Wireless, Handheld Diffuse Reflectance Spectroscopy To Quantify Tissue Microvascular Hemodynamics, Linh Luong, Alex Moazzen, Mark Romine, Katie Cho, Paul Lee

Symposium of Student Scholars

Diffuse Reflectance Spectroscopy (DRS) is a non-invasive optical method to characterize tissue optical properties for disease diagnosis and health monitoring. Two optical fibers are often used in a DRS system: one to deliver light to the tissue and the other to gather diffuse reflectance spectra, which provide quantitative details about the structure and composition of the tissue. The conventional DRS system, however, is expensive, bulky, and composed of fragile optical fibers and multiple electrical connections. Here we propose to build a wireless, handheld, and fiber-less diffuse optical spectroscopy system. Unfortunately, the diffusion approximation utilized for data analysis of the conventional …

3d Reconstruction Of Syndactylized Hand In Autodesk Recap Photo With Arduino, Caleb E. Scheideger

ONU Student Research Colloquium

Syndactyly is one of the most common congenital malformations of the hand and is a result of a failed separation of adjacent digits. These digits are common among congenital limb malformations that affect 1 out of 2,000-3,000 people at birth. A reconstructive surgery would be needed to separate the digital skin, reconstruct the web space between fingers, and cover the separated digits with soft tissues. Finding the optimal shape and size for a dorsal flap in the web commissure reconstruction is important to avoid web creep. Conducting a numerical study with known mechanical properties, such as Young’s Modulus of the …

Image Analysis Methodology For Evaluating Coating Uniformity Of Drug-Coated Angioplasty Balloons, Allison Dobson Zieschang

LSU Master's Theses

Percutaneous transluminal balloon angioplasty (PTA) is a surgical procedure to treat peripheral artery disease, but restenosis causes suboptimal outcomes in many patients. Drug-coated angioplasty balloons (DCBs) were developed to reduce the risk of restenosis by delivering anti-proliferative drugs to the lesion. The efficacy of DCBs depends on factors like drug loading and drug release rate, both of which are directly impacted by the coating uniformity. This thesis evaluates the uniformity of DBCs using fluorescence microscopy, scanning electron microscopy (SEM), qualitative analysis, and an image processing algorithm. Uniformity was quantified by three measurements: histogram standard deviation, histogram percentage of coverage, and …

A Device For Measuring Acoustic Output Intensity Of Transcranial Doppler Ultrasound Transducers For Comparison With Fda Regulations, Sarah Altman, Gregory Bashford, Benjamin Hage

Honors Program: Senior Projects (Public)

Transcranial Doppler Ultrasonography (TCD) is a non-invasive methodology which can evaluate cerebral blood flow velocity in real time. Single-element focused circular transducers placed on the scalp produce ultrasound waves capable of penetrating the skull with minimal aberration, enabling measurement of the Doppler shift. As such, TCD can measure blood flow velocity in the internal carotid and vertebral arteries, as well as the arteries of the Circle of Willis: the Anterior Cerebral (ACA), Posterior Cerebral (PCA), and Middle Cerebral Arteries (MCA). Intracranial aneurysm and ischemic stroke are serious conditions in which ballooning or occlusion of cerebral vessels cause insufficient perfusion, leading …

Evaluation Of A Portable Gynecological Examination Table On Increasing Access To Cervical Cancer Screenings, Brennan Burrows, Giuliana Motta, Vibhasri Davuluri, Urvee Deo, Aman Tahir, Brindha Rajakumar, Jacob Blumenstein, Eliza Steinberg, Mariam Tobia, Asmita Tuladhar, Abigail Ahn

Medical Student Research Symposium

Introduction: Cervical cancer is a preventable disease affecting millions of women worldwide, with higher prevalence and mortality in developing countries. One explanation of this disparity is due to reduced access to screenings, especially in rural communities where mobile health clinics are limited by what medical equipment they can bring. To address these barriers, an engineering team called Project MESA (Making Examinations Safe and Accessible) designed a gynecological examination table that is portable, lightweight, and easily sanitizable.

Objective: This study aims to (1) evaluate whether the implementation of this device improves the clinician’s ability to perform pap smears as opposed to …

Postpartum Hemorrhage Detection Device, Kaitlyn Bailey, Adrian Diaz, Alcides Caballero

Biomedical Engineering

During a cesarean section, blood loss greater than 1000 mL is classified as a hemorrhage. Quantified blood loss methods are used to detect hemorrhage, however existing methods are inaccurate and time consuming. Our proposed device is inserted vaginally during a cesarean section to collect and quantify blood lost via the cervix during and after the procedure. The device also applies light suction to the uterus, which can aid in uterus collapse and decrease the risk of postpartum hemorrhage.

Gait Analysis Device For Elderly Fall Prediction, Ryan Hahn, Claudia Miller, Evan Yakligian

Biomedical Engineering

This document serves to outline the design process and final design for our project to address elderly independent living in collaboration with Apple. Included in this document is necessary academic literature of current fall risk assessments and descriptions of the current market of wearable gait analysis devices. Based on this research and data, we then outline a plan for design, manufacturing, prototyping, and testing a device to fulfill the original prompt given by our sponsors: create a device that will increase the ability of an aging loved one to live at home safely. This device is a wearable that collects …

Deutj: An Imagej Plugin For Improved Automatic Masking And Segmentation Of Images From Confocal Microscopy, Sunny Cui

Independent Student Projects and Publications

Due to advances in microscopic imaging, there are a plethora of biological molecules that can now be tagged and subsequentially imaged from almost any cell, organism, or tissue. However, the ability of software to analyze these images remains to be a challenge. ImageJ is open source software that allows for the processing of these images, but faces challenges when dealing with images that show weak contrast between objects of interest and background. DeutJ is an ImageJ plugin that color corrects and brightness corrects gradients that inhibit segmentation in confocal microscopy images. It can analyze hundreds of images from a given …

Concurrent Validity Study Of 3d Motion Measurement Systems: Vicon Vs. Xsens, Pias Das

Masters Theses

As the Inertial Measurement System (IMS) being a potential alternative to the Optoelectronic Measurement System (OMS) in terms of capturing comprehensive and objective musculoskeletal data, they need to be verified concurrently with the OMS before we start using the IMS in clinical motion analysis. To achieve this, a concurrent validity experiment of the Xsens system (IMS) in comparison to the Vicon system (OMS) was conducted for both upper and lower extremity movements during walk, squat, and lateral lunge (left and right) to quantify the degree of similarity of kinematic data between the two systems by direct comparison, root mean square …

Gesture-Based American Sign Language (Asl) Translation System, Kayleigh Moore, Stefano Pecile, Mahdi Yazdanpour

Posters-at-the-Capitol

According to the World Health Organization (WHO), over 5% of the world's population experiences severe hearing loss. Approximately 9 million people in the U.S. are either functionally deaf or have mild-to-severe hearing loss. In this research, we designed and implemented a translation interface which turns American Sign Language (ASL) gestures captured from a pair of soft robotic gloves into text and speech instantaneously.

We used a combination of flex sensors, tactile sensors, and accelerometers to recognize hand gestures and to record hand and fingers positions, movements, and orientations. The digitized captured gestures were then sent to our proposed translation interface …

Zinc Oxide Based Nanomaterials And Device Designs - For Bioenergy Harvesting, Sensing And Water Purification, Congran Jin

Dartmouth College Ph.D Dissertations

Biomechanical energy harvested from the human body can power implantable electronics such as cardiac pacemakers, replacing conventional batteries and offering a lifelong energy solution. The electrical signals converted from biomechanical motions contain vital physiological information, making them suitable as a sensor to monitor one's health condition. Zinc Oxide (ZnO) is a versatile material with various intriguing properties, including piezoelectricity, photo-catalytic and piezo-catalytic properties. This thesis aims to exploit and enhance these properties of ZnO by rationally designing its nano- and micron-structures and employing them, along with other functional materials, in the development of novel biomechanical energy harvesting, water purification, and …

A Wearable Fiber-Free Optical Sensor For Continuous Measurements Of Cerebral Blood Flow And Oxygenation, Xuhui Liu

Theses and Dissertations--Biomedical Engineering

Wearable technologies for continuous monitoring of cerebral hemodynamics in freely behaving subjects not only advance our understanding of cognitive processing and adaptive behavior, but also provide vital information for diagnosis and therapeutic assessment of cerebral diseases associated with hypoxia/ischemia. Wearable near-infrared diffuse optical techniques have been used at the bedside to probe deep cerebral hemodynamics, including near-infrared spectroscopy (NIRS) for cerebral oxygenation measurement and diffuse correlation spectroscopy (DCS) for cerebral blood flow (CBF) measurement, respectively. However, most systems are relatively large and expensive, and use rigid fiber-optic probes that significantly constrain subject’s movement. A novel, wearable, fiber-free diffuse speckle contrast …

Nanomaterials For Cardiovascular Engineering, Roya Bagheri

Dissertations, Master's Theses and Master's Reports

Cardiovascular diseases and disorders (i.e., those related to heart and blood vessels) are the main reasons for mortality worldwide. Nanomaterials, with their unique morphologies and properties, have a great potential for advancing cardiovascular engineering to treat diseases and disorders. In this dissertation, several cardiovascular applications of conductive nanomaterials were investigated. First, a conductive nanomaterial was explored to fabricate biohybrid nanomaterial-cardiomyocyte (CM – heart muscle cell) systems. Using Carbon Nanotube (CNT) forest as a 3D porous and conductive scaffold was investigated. The influence of the CNT forest on the viability, attachment, and spreading of CMs and their genetic information was …

Advanced Tools For Time-Resolved Imaging Of Tissue Metabolism, Arthur Petusseau

Dartmouth College Ph.D Dissertations

Medical imaging is a crucial tool in diagnosing and treating diseases, and by far the most common set of tools used for point-of-care guidance between a physician and patient are optical devices. For example, visible light imaging has unique applications in endoscopy, dermatology, microscopy, and this range of devices utilize a wide range of optical signals for sensing the tissue. Fluorescence imaging has become a niche but growing methodology in medical diagnostics and treatment because of its simplicity and the ability to integrate reporter molecules, that can reveal detailed information about cellular structures, metabolism, signaling, and other biomolecular features of …

Longitudinal Oxygen Imaging In 3d (Bio)Printed Models, Ryan Curtis O'Connell

Graduate Theses, Dissertations, and Problem Reports (ETD)

Electron paramagnetic resonance (EPR), and its molecular imaging modality, is a powerful tool to noninvasively map various biological and chemical markers within objects of interest. Reliable data acquisition is a major impeding factor for longitudinal hands-off measurements. Measurements are especially challenging in biomedical applications, as live objects are not static. Frequent changes occur that require constant fine recalibration of the EPR detection system, called the resonator. To enable longitudinal imaging, a technology permitting automatic digital control of resonator coupling, tuning, and EPR data acquisition was developed. Automation was achieved through the utilization of a microcontroller and digital peripheral components such …

Advancing Medical Technology For Motor Impairment Rehabilitation: Tools, Protocols, And Devices, Matthew Yough

Graduate Theses, Dissertations, and Problem Reports (ETD)

Excellent motor control skills are necessary to live a high-quality life. Activities such as walking, getting dressed, and feeding yourself may seem mundane, but injuries to the neuromuscular system can render these tasks difficult or even impossible to accomplish without assistance. Statistics indicate that well over 100 million people are affected by diseases or injuries, such as stroke, Parkinson’s Disease, Multiple Sclerosis, Cerebral Palsy, peripheral nerve injury, spinal cord injury, and amputation, that negatively impact their motor abilities. This wide array of injuries presents a challenge to the medical field as optimal treatment paradigms are often difficult to implement due …