Biomechanics and Biotransport Commons^™

Characterization Of Poly(Dimethylsiloxane) Blends And Fabrication Of Soft Micropillar Arrays For Force Detection, Thomas J. Petet Jr

Theses and Dissertations

Diseases involving fibrosis cause tens of thousands of deaths per year in the US alone. These diseases are characterized by a large amount of extracellular matrix, causing stiff abnormal tissues that may not function correctly. To take steps towards curing these diseases, a fundamental understanding of how cells interact with their substrate and how mechanical forces alter signaling pathways is vital. Studying the mechanobiology of cells and the interaction between a cell and its extracellular matrix can help explain the mechanisms behind stem cell differentiation, cell migration, and metastasis. Due to the correlation between force, extracellular matrix assembly, and substrate …

Anatomy, Implant Selection And Placement Influence Spine Mechanics Associated With Total Disc Replacement, Justin F.M. Hollenbeck

Electronic Theses and Dissertations

Through aging and injury, the intervertebral disc of the lumbar spine can undergo degeneration, leading to collapse of the vertebrae and low back pain, a symptom that affects half the adult population in any given year. In an effort to reduce low back pain, total disc replacement treatment removes the degenerated disc, restores natural height and lordosis of the segment, and preserves motion at the joint. Patient anatomy, implant selection, and implant placement play significant roles in a patient's outcomes after total disc replacement surgery. Thus, the objective of the work presented in this thesis was to develop a suite …

A Microfluidic-Based Tactile Sensor For Palpating Mice Tumor Tissues, Yichao Yang, Garett Johnson, Dean Krusienski, Siqi Guo, Cheng Lin, Zhili Hao

Mechanical & Aerospace Engineering Faculty Publications

In light of the need of tissue palpation for Robotics-assisted Minimally Invasive Surgery (RMIS), this paper presents a microfluidic-based tactile sensor for palpating mice tissues for tumor localization. The core of the sensor is a 3x3 sensing-plate/transducer array built into a single polydimethylsiloxane (PDMS) microstructure, with a transducer spacing of 3.75mmx1.5mm. Mounted on a robot, the sensor is pressed against a tissue region with a pre-defined indentation depth pattern, and consequently the stiffness distribution across the tissue region translates to the deflection distribution of the sensing-plate array and is captured by the transducer array underneath as resistance changes. Thus, the …

Investigation Of The Inherent Chemical, Structural, And Mechanical Attributes Of Bio-Engineered Composites Found In Nature: Alligator Gar’S Exoskeleton Fish Scales, Wayne Derald Hodo

Graduate Theses and Dissertations

The U.S. Army has determined a huge cost savings of up to 51% can be accomplished by reducing the gross vehicle weight, for their personnel carrier, by 33%. To cut cost, composite materials are needed. Man-made composites can have superior material properties (high-strength, high-fracture toughness, and lightweight), but they are prone to delamination at the glued-layered interface. In contrast, fish scale is a natural composite that has the same material properties and, additionally, tend not to delaminate.

The focus of this study was to learn how nature integrates hard and soft materials at each length scale to form a layered …

Rupture In Abdominal Aortic Aneurysm, Qusay Alfaori

Graduate Theses and Dissertations

Quantification of abdominal aortic aneurysm development, its growth kinetics, and rupture criteria are important to decrease the risk of this life-threatening event. Uniaxial testing of healthy and collagen degraded aortic specimens from pigs was performed. A mathematical model, from the literature, for the stress-strain relationship that is suitable for describing the behavior of abdominal aortic tissue was used to derive specific tissue properties/parameters as a function of strain rate and as a function of specimen orientation. Analyses consisting of Finite Element Modeling of healthy and collagen degraded abdominal aortas were performed using ABAQUS finite element code and the measured properties. …

Prediction Of Rupture In Abdominal Aortic Aneurysm, Qusay Alfaori

Graduate Theses and Dissertations

Studying the development of abdominal aortic aneurysm (AAA) through quantification of its growth kinetics and rupture criteria is important to decrease the risk of this life-threatening event. Uniaxial and biaxial testing of healthy and time-dependent Type-I collagen degraded aortic specimens from pigs was performed. Stress-strain suitable mathematical models describing the behavior of abdominal aortic tissue were utilized to derive specific tissue properties and parameters. Reduction in Type-I collagen fraction was observed using picrosirius red staining method, bright field microscopy, and MATLAB. Finite Element Modeling (FEM) of healthy and time-dependent Type-I collagen degraded abdominal aortas were performed using ABAQUS finite element …

Modeling Viscoelastic Behavior In Compact Bone Through A Distribution Of Collagen D-Spacing: A Finite Element Analysis, Christopher Ha

Master's Theses

Osteoporosis affects nearly 54 million people in the United States. The cost associated with treatment is estimated to be $19 billion per year and is expected to grow yearly. D-spacing is the staggering of collagen molecules found at the nanoscopic level. Previously thought to have a constant value, recent studies have found that D-spacing has a distribution of values throughout the tissue. As part of an ongoing effort in understanding the mechanisms that are affected by osteoporosis, a finite element model was developed to explore the effects of D-spacing distribution on the viscoelastic material properties of bone tissue. The goal …

Investigation Of Bovine Serum Albumin (Bsa) Attachment Onto Self-Assembled Monolayers (Sams) Using Combinatorial Quartz Crystal Microbalance With Dissipation (Qcm-D) And Spectroscopic Ellipsometry (Se), Hanh T.M. Phan, Shannon L. Bartelt-Hunt, Keith B. Rodenhausen, Mathias Schubert, Jason C. Bartz

Department of Civil and Environmental Engineering: Faculty Publications

Understanding protein adsorption kinetics to surfaces is of importance for various environmental and biomedical applications. Adsorption of bovine serum albumin to various selfassembled monolayer surfaces including neutral and charged hydrophilic and hydrophobic surfaces was investigated using in-situ combinatorial quartz crystal microbalance with dissipation and spectroscopic ellipsometry. Adsorption of bovine serum albumin varied as a function of surface properties, bovine serum albumin concentration and pH value. Charged surfaces exhibited a greater quantity of bovine serum albumin adsorption, a larger bovine serum albumin layer thickness, and increased density of bovine serum albumin protein compared to neutral surfaces at neutral pH value. The …

Characterization Of Electrophorectic Separations On A Cellulose Paper-Microfluidic Chip, Kyle Robert Fast

Master's Theses

The purpose of this thesis project is to demonstrate the ability to utilize electrophoresis in a cellulose paper microfluidic chip to manipulate charged particles. Materials were selected and a manufacturing protocol was created to successfully apply the electric field onto the paper chip. Experiments were performed to characterize the separation rates for charged, colorimetric dye, Orange G in the membrane as a function of an applied electric field, dye concentration, and distance traveled. The experiments confirmed that the electric field can be applied to the chip and particle separation rates were characterized. Next, the determined rates results were used to …

Changes In Vessel Properties During Early Progression Of Murine Abdominal Aortic Aneurysms From In Vivo Ultrasound, Luis R. Avila Murati, Evan H. Phillips, Craig J. Goergen

The Summer Undergraduate Research Fellowship (SURF) Symposium

Abdominal aortic aneurysms (AAA) are a common and frequently fatal disease characterized by the weakening and dilation of the aorta. The larger the aneurysm, the higher the chances are of rupturing and life-threatening hemorrhage. The aim of this study is to apply the angiotensin II (AngII) model of AAAs in male apolipoprotein-E-deficient mice (apoE^-/- C57Bl/6J), in order to analyze, quantify, and understand the pathologies and characteristics associated with early AAA development. To date, many studies focusing on the evaluation of AAA characteristics have been performed ex vivo. Therefore, we focused on in vivo assessment, through the use of …

Development And Validation Of A Tibiofemoral Joint Finite Element Model And Subsequent Gait Analysis Of Intact Acl And Acl Deficient Individuals, Nicholas Czapla

Master's Theses

Osteoarthritis (OA) is a degenerative condition of articular cartilage that affects more than 25 million people in the US. Joint injuries, like anterior cruciate ligament (ACL) tears, can lead to OA due to a change in articular cartilage loading. Gait analysis combined with knee joint finite element modeling (FEM) has been used to predict the articular cartilage loading. To predict the change of articular cartilage loading during gait due to various ACL injuries, a tibiofemoral FEM was developed from magnetic resonance images (MRIs) of a 33 year male, with no prior history of knee injuries. The FEM was validated for …

A Finite Element Analysis On The Viscoelasticity Of Postmenopausal Compact Bone Utilizing A Complex Collagen D-Spacing Model, Austin C. Cummings

Master's Theses

The nanoscale dimension known as D-spacing describes the staggering of collagen molecules, which are fundamental to the biphasic makeup of bone tissue. This dimension was long assumed to be constant, but recent studies have shown that the periodicity of collagen is variable. Given that the arrangement of collagen molecules is closely related to the degree of bone mineralization, recent studies have begun to look at D-spacing as a potential factor in the ongoing effort to battle postmenopausal osteoporosis. The theoretical models presented by previous studies have only opted to model a single collagen-hydroxyapatite period, so the creation of an intricate …

Modeling The Contributions Of Hand Loads To Cervical Spine Compressive Forces, Mohamed R.S. Amar

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The purpose for this study is threefold. All involve single handed lifting tasks where the height of the lifted object, the distance of the lifted object from the body, and the angle of the lift relative to the body were varied. First, examine the activity of each of the shared musculature of selected shared muscles between the shoulder and cervical spine. Second, attempt to empirically model the activations of the shared muscles. Third, to understand the relationship between the active and antagonistic contraction. Finally, to establish a biomechanical model to estimate the compressive forces on the cervical spine.

Ten subjects …

Magnetic Manipulation And Multimodal Imaging For Single Cell Direct Mechanosensing, Robert L. Wilson

Open Access Theses

The study of internal mechanics of single cells is paramount to understand mechanisms of mechanoregulation. External loading and cell-mediated force generation result in changes in cell shape, rheology, and the deformation of subcellular structures such as the nucleus. Moreover, alterations in the processes that regulate these responses have been further correlated to specific pathologies. Cellular deformation is often studied through application of forces in the environment of the cell, relying on strain and stress transfer through focal adhesions and the cytoskeletal system. However, the transfer of these external forces to internal mechanics can introduce uncertainties in the interpretation of subcellular …

Characterization And Evaluation Of Head Impact Sensors And Varsity Football Helmets, Brian R. Cummiskey

Open Access Theses

An increased understanding of the effects of brain injury in recent years has led to greater attention being given to the topic. A desire to investigate the causal agents of these injuries in athletes has led to the development and use of several devices that track head impacts as well as improving helmet technology to protect players from said impacts. In order to determine which devices are able to best measure head impacts, a Hybrid III headform was used to quantify the accuracy for translational and angular accelerations. Testing was performed by means of administering impacts to a helmet on …

Measurement, Characterization, And Effects Of Head Impacts In Women's Soccer, Emily C. Mccuen

Open Access Theses

The potential for long term neurological deficits resulting from repetitive head trauma is a major concern for collision sport athletes. Research conducted on football played has found neurophysiologic changes in the absence of concussion in athletes as early as high school age. Given that female soccer players show the highest rate of concussion for female athletes and a higher rate of concussion than their male counterparts, it is important to characterize the types of impacts female soccer athletes receive and assess female soccer athletes for neurophysiologic changes due to these impacts. This work paired head impact sensors with functional MRI …

A Three Constituent Mixture Theory Model Of Cutaneous And Subcutaneous Tissue In The Context Of Neonatal Pressure Ulcer Etiology And Prevention, Anne Dye Zakrajsek

Open Access Dissertations

Localized ischemia, impaired interstitial fluid flow, and sustained mechanical loading of cells have all been hypothesized as mechanisms of pressure ulcer (PrU) etiology. Time-varying loading has experimentally been shown to increase fluid flow in human skin in vivo. Towards the design of prophylactic protocols and treatment modalities for PrU management there is a need for an analytical model to investigate the local fluid flow characteristics of skin tissue under time-varying loading. In this study, a triphasic mixture theory model with constituents of extracellular matrix, interstitial fluid, and blood was calibrated and validated and used to investigate stress and fluid velocity …

Unveiling The Mechanical Behavior Of The Rod-Like Microstructure In The Radular Teeth Of Cryptochiton Stelleri, Enrique Escobar De Obaldia

Open Access Dissertations

Natural ceramics provided with high volume fractions of mineralized materials that are surrounded by a weak organic interface combine the stiff mechanical behavior of building blocks, like hydroxyapatite or aragonite, and the compliance of the organic surroundings. Unique mechanical properties (e.g. light density and toughness) distinguish bio-composites from common engineering materials. A key example is the highly mineralized shell of the radular teeth of the Crypochiton stelleri. Nature has provided the radular teeth with a highly oriented rod-like microstructure of nano-scale dimensions embedded in a matrix of chitin sheaths. Compared to other biological materials, the external iron oxide layer of …

Collagen Crosslinking Reagent Utilized To Modify The Mechanical Properties Of The Soft Palate In Equine Snoring And Apnea Applications, Stephanie L. Hunt

Theses and Dissertations--Biomedical Engineering

Snoring is a sleep disruption that can lead to obstructive sleep apnea (OSA), which interrupts breathing by obstructing the airway. Injecting a protein crosslinker, such as genipin, into the soft palate could decrease the severity of snoring and OSA by stiffening the soft palate. Equine soft palates modeled human palates due to a high incidence of awake snoring and apnea.

The pilot in vivo study treated six horses with two 100 mM injections of the buffered genipin reagent. The efficacy phase horses underwent respiratory audio recordings to document snoring changes using Matlab and ImageJ in the time and frequency domains. …

Du05, Center For Orthopaedic Biomechanics, Michael D. Harris, Phd, Kevin Shelburne, Phd

Natural Knee Data

No abstract provided.