Biological Engineering Commons^™

Enhanced Anthocyanin Extraction From Red Cabbage Using Pulsed Electric Field Processing, Tanya K. Gachovska, David A. Cassada, Jeyamkondan Subbiah, Milford Hanna, Harshavardhan Thippareddi, Daniel D. Snow

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This study was conducted to evaluate the effect of pulsed electric field (PEF) treatment on anthocyanin extraction from red cabbage using water as a solvent. Mashed cabbage was placed in a batch treatment chamber and subjected to PEF (2.5 kV/cm electric field strength; 15 μs pulse width and 50 pulses, specific energy 15.63 J/g). Extracted anthocyanin concentrations (16 to 889 μg/mL) were determined using HPLC. Heat and light stabilities of the control and PEF-treated samples, having approximately the same initial concentrations, were studied. PEF treatments enhanced total anthocyanin extraction in water from red cabbage by 2.15 times with a higher …

Evaluation Of Ethanol And Water Introduction Via Fumigation On Efficiency And Emissions Of A Compression Ignition Engine Using An Atomization Technique, Grant S. Janousek

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Performance of a diesel engine, equipped for ethanol and water fumigation, was studied. The method implemented allowed for non-destructive introduction of liquids in advance of the turbocharger. Engine torque, speed, emission components, diesel and ethanol fuel rates were recorded and analyzed for each mixture of inputs. Based on the results of the study, thermal efficiency was not significantly different from the baseline diesel performance when using several ethanol and water mixtures. On the other hand, ethanol fumigation caused a significant reduction in NOx emissions and an increase in HC and CO emissions. No significant changes in CO2 or O2 occurred.

Department Of Biological Systems Engineering Newsletter, Volume 6, Number 2, July 2010

BSE Department Magazine

No abstract provided.

Securing Foreign Oil: A Case For Including Military Operations In The Climate Change Impact Of Fuels, Adam J. Liska, Richard K. Perrin

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Military operations are major industrial activities that use massive amounts of fuel and materials that significantly contribute to climate change. In this article, we assert that military activity to protect international oil trade is a direct production component for importing foreign oil— as necessary for imports as are pipelines and supertankers—and therefore the greenhouse gas (GHG) emissions from that military activity are relevant to U.S. fuel policies related to climate change. Military security for protection of global maritime petroleum distribution is part of the acquisition process, but in addition, recent Middle Eastern wars may also be related to securing petroleum …

Ultrasound Transient Shear Wave Elasticity Imaging For Tendon Tissue, Pengfei Song

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Degeneration of tendon tissue is a common cause of tendon dysfunction with the symptoms of repeated episodes of pain and palpable increase of tendon thickness. Tendon mechanical properties are directly related to its physiological composition and the structural organization of the interior collagen fibers which could be altered by tendon degeneration due to overuse or injury. Thus, measuring mechanical properties of tendon tissue may represent a quantitative measurement of pain, reduced function, and tissue health. Ultrasound elasticity imaging has been developed in the last two decades and has proved to be a promising tool for tissue elasticity imaging. To date, …

Cell Culture Method And Apparatus For Mechanically Stimulating Cells, Seth W. Donahue

Michigan Tech Patents

A cell culture assembly and a method for culturing cells that provide mechanical stimulation to cells. The cell culture assembly can include a flow chamber positioned in a fluid path and a support comprising cells positioned within the flow chamber to expose the cells to the fluid path. The cell culture assembly can further include a means for producing a steady flow of fluid in the fluid path, and a means for producing an oscillatory flow of fluid in the fluid path simultaneously with producing the steady flow of fluid in the fluid path to mechanically stimulate the cells. The …

The Gel Documentation System: A Cornerstone To The Implementation Of The Introduction To Biotechnology And Introduction To Bioinformatics Cross-Disciplinary Course Series, Marcy Kelly, Gregory Lampard, Constance Knapp

Cornerstone 3 Reports : Interdisciplinary Informatics

No abstract provided.

Development Towards A Protocol To Test For The Creation Of A “Diabetic” Environment In A Blood Vessel Mimic, Kaitlyn Kirk, Development Towards A Protocol To Test For The Creation Of A “Diabetic” Environment In A Blood Vessel Mimic

Biomedical Engineering

Diabetes mellitus affects a huge proportion of people; about 6% of the population in the US had diabetes in 2007 (16). Diabetes promotes dyslipidemia, an imbalance in the circulating levels of lipids and lipoproteins, and diabetes is one of the leading risk factors for coronary artery and peripheral vascular diseases (11, 51, 52).  There are two types of diabetes; type 1 diabetes accounts for about 10% of diagnosed cases and type 2 accounts for about 90% (11).  Diabetic patients react differently to stents and there is a great need to enhance the treatment.  The goal of this project was, and …

Antenna Development For Radio Frequency Hyperthermia Applications, Sergio Curto

Doctoral

This thesis deals with the design steps, development and validation of an applicator for radio frequency hyperthermia cancer therapy. An applicator design to enhance targeted energy coupling is a key enabler for preferential temperature increments in tumour regions. A single-element, near-field approach requires a miniaturised solution, that addresses ergonomic needs and is tolerant to patient anatomy. The antenna war-field rriodality and the high-dielectric patient loading introduce significant analytical and computational resource challenges. The antenna input impedance has to be sufficiently insensitive to in-band resonant cletuning and the fields in the tissue can he targeted to selected areas in the patient. …

Liquid Crystalline Elastomers: Effects Of Substrate Anisotropy On Cell Behavior, Christine Depompeo

Renée Crown University Honors Thesis Projects - All

One of the major challenges in tissue engineering today is inducing organization at the cellular level in vitro. Most biological tissues exhibit anisotropic behavior. They perform differently and have different mechanical properties in different directions. This environment is difficult to mimic with traditional cell culturing methods. The development of anisotropic cell substrates may have the potential to encourage the organization required at the cellular level to induce in vitro tissue formation, an exciting prospect for the advancement of the field of tissue engineering.

It is well known that liquid crystalline elastomers (LCEs) are highly organized polymers with temperature-dependent properties. …

Uncertainty In Indirect Land Use Change Emissions In The Life Cycle Of Biofuels: Implications For Legislation, Adam Liska

Adam Liska Papers

Current EPA life cycle analysis (LCA) of greenhouse gas (GHG) emissions from corn-ethanol will be the foundation for regulations for advanced biofuels. It appears regulatory policies that include emissions from indirect land use change (and other indirect emissions) in the biofuel life cycle are moving faster than the underlying science; there is no comparable scientific study that approaches the complexity in methods currently used by the EPA. There is substantial uncertainty in quantifying direct and indirect emissions from fuels, as evidenced by conflicting results from state and federal regulators and from within the scientific community. If indirect emissions from land …

Isolated Cellulose Synthase Promoter Regions, Chandrashekhar P. Joshi

Michigan Tech Patents

The invention relates to methods of inducing expression of coding sequences including cellulose synthase coding sequences in transgenic plants using promoters of cellulose synthase genes from Populus plant species and transgenic plants produced by the methods.

Controlling Nonviral Gene Delivery Through The Cell-Biomaterial Interface, Beth A. Duensing

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Controlling Nonviral Gene Delivery through the Cell-Biomaterial Interface
Beth Ann Duensing, M.S. University of Nebraska, 2010
Adviser: Angela Pannier

Cell-biomaterial interactions and the corresponding cellular behaviors are poorly understood. Therefore, in this study, the ability of biomaterial surface properties to control nonviral gene delivery was investigated through surface chemistry and protein adsorption and subsequently correlated to cellular behaviors controlled by cell-biomaterial interactions. Self-assembled monolayers (SAMs) of alkanethiols on gold were used as model biomaterials to investigate the effect of surface properties on nonviral gene transfer to cells adhered to these surfaces. SAMs presenting terminal CH₃, OH, COO^{- …}

Life Cycle Greenhouse Gas Emissions From Biofuels: Variability, Uncertainty, And Steps Toward Accurate Regulation, Adam J. Liska, Bruce E. Dale

Adam Liska Papers

a)Variability in life cycle greenhouse gas (GHG) emissions from corn-ethanol:
biorefineries
cropping systems
co-product feeding to livestock

b) EPA regulation of life cycle GHG emissions from biofuels & use of life cycle analysis (LCA):
uncertainties & inaccuracies
indirect effects

c) Building accurate knowledge infrastructure, theory, and research teams for accurate LCA methods for biofuels

Department Of Biological Systems Engineering Newsletter, Volume 6, Number 1, January 2010

BSE Department Magazine

No abstract provided.

Effect Of Magnetron Frequency On Heating Pattern In Domestic Oven, Sohan Birla, Krishnamoorthy Pitchai, Jeyamkondan Subbiah, David D. Jones

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

In this study a computer model was developed to simulate microwave heating of a model food with a range of magnetron frequencies. The range was decided upon performing the frequency spectrum analysis of microwave leakage from the microwave oven. Simulation results showed that the magnetron input as sinusoidal frequency from 2.44 GHz to 2.48 GHz generates different heating profiles. The simulated heating profiles were compared with experimental heating profiles obtained by using an IR camera. None of simulations with individual frequency exactly matches with experimental temperature profile. The closet match between simulated and observed temperature profiles was found with 2.46 …

Sodium Hydroxide Pretreatment And Enzymatic Hydrolysis Of Coastal Bermuda Grass, Ziyu Wang, Deepak R. Keshwani, Arthur P. Redding, Jay J. Cheng

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Coastal Bermuda grass was pretreated with NaOH at concentrations from 0.5% to 3% (w/v) for a residence time from 15 to 90 minutes at 121 °C. The pretreatments were evaluated based on total lignin removal and production of total reducing sugars, glucose and xylose from enzymatic hydrolysis of the pretreated biomass. Up to 86% lignin removal was observed. The optimal NaOH pretreatment conditions at 121 °C for total reducing sugars production as well as glucose and xylose yields are 15 minutes and 0.75% NaOH. Under these optimal pretreatment conditions, total reducing sugars yield was about 71% of the theoretical maximum, …

Modeling Changes In Biomass Composition During Microwave-Based Alkali Pretreatment Of Switchgrass, Deepak R. Keshwani, Jay J. Cheng

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This study used two different approaches to model changes in biomass composition during microwave-based pretreatment of switchgrass: kinetic modeling using a time-dependent rate coefficient, and a Mamdani-type fuzzy inference system. In both modeling approaches, the dielectric loss tangent of the alkali reagent and pretreatment time were used as predictors for changes in amounts of lignin, cellulose, and xylan during the pretreatment. Training and testing data sets for development and validation of the models were obtained from pretreatment experiments conducted using 1–3% w/v NaOH (sodium hydroxide) and pretreatment times ranging from 5 to 20 minutes. The kinetic modeling approach for lignin …

Dual-Stage Sugar Substitution In Strawberries With A Stevia-Based Sweetener, Juan Garcia-Noguera, Curtis L. Weller, Francisca I. P. Oliveira, Sueli Rodrigues, Fabiano A. N. Fernandes

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The present study introduces and analyzes a new process denominated dual-stage sugar substitution (D3S). This process aims to induce sugar substitution in strawberries. In a first stage, high-calorie sugars (sucrose, fructose and glucose) are partially removed from the fruit samples and in a second stage, low-calorie sugar (stevioside and rebaudioside) is incorporated to the fruit to maintain its sweetness. The process was evaluated by studying the use of ultrasound application in one or both stages of the D3S process. Best performance of the process was obtained by subjecting the fruit samples to ultrasound in the sugar removal stage followed by …

Cytocompatible Cross-Linking Of Electrospun Zein Fibers For The Development Of Water-Stable Tissue Engineering Scaffolds, Quiran Jiang, Narendra Reddy, Yiqi Yang

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This paper reports a new method of cross-linking electrospun zein fibers using citric acid as a non-toxic cross-linker to enhance the water stability and cytocompatibility of zein fibers for tissue engineering and other medical applications. The electrospun structure has many advantages over other types of structures and protein-based biomaterials possess unique properties preferred for tissue engineering and other medical applications. However, ultrafine fiber matrices developed from proteins have poor mechanical properties and morphological stability in the aqueous environments required for medical applications. Efforts have been made to improve the water stability of electrospun protein scaffolds using cross-linking and other approaches, …