Engineering Commons^™

A Dc Distribution System For Power System Integration Of Plug-In Electric Vehicles; Modeling, Stability And Operation, Mansour Tabari

Electronic Thesis and Dissertation Repository

This thesis is mainly focused on (i) modeling of dc distribution systems for power system integration of plug-in electric vehicles (PEVs), (ii) proposing a method to enhance the stability of the dc distribution systems, and (iii) proposing an energy management strategy to control the power flow in the dc distribution system. The dc distribution system is expected to be more efficient and economical than a system of ac-dc battery chargers directly interfaced with an ac grid.

In the first part, a systematic method for developing a model for a dc distribution system, based on the configuration of the system is …

Computer Modeling And Simulation Of Implantable Medical Device Heating Due To Mri Gradient Coil Fields, Bryan David Stem

Open Access Theses

For patients with implantable medical devices, the ability to safely undergo MRI scanning is critical to ensuring the highest standard of care. The gradient coils of an MRI generate kilohertz frequency, time varying magnetic fields. These magnetic fields induce a voltage on the external case of metallic, implantable medical devices through electromagnetic induction. Since the magnetic field generated by a gradient coil is time varying, the induced voltage results in the flow of eddy currents which can cause heating effects. These heating effects have been successfully modeled using ANSYS Maxwell and ANSYS Mechanical software packages.

The multi-physics simulation and solution …

Analysis Of A Dual Scissored-Pair,Variable-Speed, Control Moment Gyroscope Driven Spherical Robot, Richard Chase

Wayne State University Dissertations

The objective of this research is to compare barycenter offset based designs of spherical robots to control moment gyroscope (CMG) based designs in order to determine which approach is most effective. The first objective was to develop a list of current state of the art designs in order to gain an overall understanding of what the obstacles in this area of research were. The investigation showed that barycenter offset designs can produce a low, continuous output torque, whereas CMG based designs can usually only produce a high, momentary output torque. The second objective was to develop a CMG based design …

Multifrequency Averaging In Power Electronic Systems, Fei Pan

Theses and Dissertations--Electrical and Computer Engineering

Power electronic systems have been widely used in the electrical power processing for applications with power levels ranging from less than one watt in battery-operated portable devices to more than megawatts in the converters, inverters and rectifiers of the utility power systems. These systems typically involve the passive elements such as inductors, capacitors, and resistors, the switching electronic components such as IGBTs, MOSFETS, and diodes, and other electronic circuits. Multifrequency averaging is one of the widely used modeling and simulation techniques today for the analysis and design of power electronic systems. This technique is capable of providing the average behavior …

Modeling And Fault Detection In Dc Side Of Photovoltaic Arrays, Mohd Akram

Electronic Theses and Dissertations

Fault detection in PV systems is a key factor in maintaining the integrity of any PV system. Faults in photovoltaic systems can cause irrevocable damages to the stability of the PV system and substantially decrease the power output generated from the array of PV modules. Among'st the various AC and DC faults in a PV system, the clearance of the AC side faults is achieved by conventional AC protection schemes,the DC side, however , there still exists certain faults which are difficult to detect and clear. This paper deals with the modeling, detection and classification of these types of DC …

Modeling And Simulation Of All-Electric Aircraft Power Generation And Actuation, David Woodburn

Electronic Theses and Dissertations

Modern aircraft, military and commercial, rely extensively on hydraulic systems. However, there is great interest in the avionics community to replace hydraulic systems with electric systems. There are physical challenges to replacing hydraulic actuators with electromechanical actuators (EMAs), especially for flight control surface actuation. These include dynamic heat generation and power management. Simulation is seen as a powerful tool in making the transition to all-electric aircraft by predicting the dynamic heat generated and the power flow in the EMA. Chapter 2 of this dissertation describes the nonlinear, lumped-element, integrated modeling of a permanent magnet (PM) motor used in an EMA. …

The Modeling, Analysis And Control Of Resilient Manufacturing Enterprises, Yao Hu

Theses and Dissertations--Electrical and Computer Engineering

The resilience of manufacturing enterprises is an important research topic, since disruptions have severe effects on the normal operation of manufacturing enterprises, especially as manufacturing supply chains become global. Although many case studies have been carried out to address resilience in organizations, a systematic method to model and analyze the resilience dynamics in manufacturing enterprises is not well developed. This study is intended to conduct research on quantitative analysis and control for resilience.

After reviewing the literature addressing resilience, a modeling framework is presented to characterize the resilience of a manufacturing enterprise responding to disruptive events, which includes inventory ow …

Modeling Of Sic Power Semiconductor Devices For Switching Converter Applications, Ruiyun Fu

Theses and Dissertations

Thanks to recent progress in SiC technology, SiC JFETs, MOSFETs and Schottky diodes are now commercially available from several manufactories such as Cree, GeneSiC and Infineon. SiC devices hold the promise of faster switching speed compared to Si devices, which can lead to superior converter performance, because the converter can operate at higher switching frequencies with acceptable switching losses, so that passive filter size is reduced. However, the ultimate achievable switching speed is determined not only by internal semiconductor device physics, but also by circuit parasitic elements. Therefore, in order to accurately predict switching losses and actual switching waveforms, including …

Influence Of Defects And Impurities On Solar Cell Performance, Vinay Budhraja

Dissertations

Multicrystalline silicon (mc-Si) solar cells exhibit high impurity content and higher density of crystal defects such as grain boundaries, dislocations, stacking faults and impurity precipitates. Even though the effect of dislocations on mc-Si solar cell performance has been studied, a severe lack of understanding of the quantitative effects of dislocations on cell parameters still exists. Some correlation has been reported under the assumption of a uniform distribution of dislocation density and a negligible effect of front and back surface recombination velocity. This assumption can cause a significant error as the current mc-Si technology provides good surface passivation by SiN:H and …

Modeling Of Sic P-Channel Insulated Gate Bipolar Transistors (Igbts), Mahmood Saadeh

Graduate Theses and Dissertations

A new physics-based IGBT compact model has been developed for circuit simulation of silicon (Si) or silicon carbide (SiC) devices. The model accurately predicts the steady-state output, transfer and switching characteristics of the IGBT under a variety of different conditions. This is the first IGBT model to predict the behavior of p-channel SiC IGBTs. Previous work on IGBT models has focused on Si n-channel IGBTs [1-3]. This unified model is not limited to SiC p-channel IGBTs; the user has the option to select between Si or SiC, and n-channel or p-channel, making it the first IGBT model that captures the …

Modeling And Development Of A Mems Device For Pyroelectric Energy Scavenging, Salwa Mostafa

Doctoral Dissertations

As the world faces an energy crisis with depleting fossil fuel reserves, alternate energy sources are being researched ever more seriously. In addition to renewable energy sources, energy recycling and energy scavenging technologies are also gaining importance. Technologies are being developed to scavenge energy from ambient sources such as vibration, radio frequency and low grade waste heat, etc. Waste heat is the most common form of wasted energy and is the greatest potential source of energy scavenging.

Pyroelectricity is the property of some materials to change the surface charge distribution with the change in temperature. These materials produce current as …

Development Of Reduced Complexity Models For Electromagnetic Modeling, Changyi Su

All Dissertations

The current and field distributions of various structures can be calculated using full-wave numerical modeling codes. However, this approach is limited by the complex models and extensive computational resources required to analyze the details of each structure. In addition, brute-force modeling of the entire geometry provides relatively little physical insight into the electromagnetic interference (EMI) source mechanisms. Alternatively an effective equivalent model can be obtained by eliminating sources and structures that do not contribute significantly to the radiated emissions and focusing on the features that could possibly be significant sources of EMI. Equivalent models are generally much simpler than model-everything …

Monitoring, Diagnosis, And Control For Advanced Anesthesia Management, Zhibin Tan

Wayne State University Dissertations

Modern anesthesia management is a comprehensive and the most critical issue in medical care. During the past dacades, a large amount of research works have been focused on the problems of monitoring anesthesia depth, modeling the dynamics of anesthesia patient for the purpose of control, prediction, and diagnosis.

Monitoring the anesthesia depth is not only for keeping the patient in adquate anesthesia level but also for preventing the patient from overdosing. Several EEG based indexes have been developed such as the BIS, and Entropy etc. for measuring depth. However, reports mentioned that those indexes in some cases fail in detecting …

Observer Incorporated Neoclassical Controller Design: A Discrete Perspective, Winston Alexander Baker

Master's Theses (2009 -)

Control theory has generally been divided into two categories, modern control and classical control. Modern control uses state feedback to alter the pole locations of a given system. Classical control uses pre-compensation to alter the zeroes of the system and uses output feedback to adjust the poles to bring stability to the system. The drawback is that the application of classical control techniques can be a lengthy, complicated and iterative design process and in the end, classical control techniques still do not give information about the state of the system. Neoclassical control combines classical control techniques with the state feedback …

Unified Large And Small Signal State-Space Based Modeling And Symbolic Simulation For Pwm Converters, Ehab Shoubaki

Electronic Theses and Dissertations

In this Dissertation, which concentrates on discrete modeling for control purposes of DC/DC converters and simulation through symbolic techniques. A Unified Discrete State-Space Model for power converters in CCM is presented. Two main approaches to arriving at the discrete model are used. The first approach involves an impulse function approximation of the duty cycle modulation of the converter switches, and this approach results in a small signal discrete model. The Second approach is direct and does not involve any approximation of the modulation, this approach yields both a large signal nonlinear discrete model and a linear small signal model. Harmonic …

High Voltage Dc Converter Systems Modeling, Simulation And Analysis, Manish A. Dalal

Browse all Theses and Dissertations

The thesis provides insights into important modeling techniques to model the converter system, machine design, control and power stages and integration of the various sub systems to simulate the system level performance. This innovative modeling and simulation project is very relevant to optimizing the system performance, designing the sub circuits, components selection, predicting the system stability and impulse responses. The thesis presents modeling and simulation of three different 270VDC converter systems and comparing their performances against each other. The 270VDC converter system accepts either Generator 3-phase AC voltages or fixed three voltage source followed by single or dual converter stages …

Modeling Of Liquid Crystal Display And Photonic Devices, Zhibing Ge

Electronic Theses and Dissertations

Liquid crystal (LC) materials have been widely applied in electro-optical devices, among which display is the most successful playground and numerous new applications in photonic areas (such as laser beam steering devices) are also emerging. To well guide the device design for optimum performance, accurate modeling is of prior and practical importance. Generally, the modeling of LC devices includes two parts in sequence: accurate LC molecule deformation extraction under external electric fields and optical calculation thereafter for the corresponding electro-optical behaviors. In this dissertation, first, hybrid finite element method and finite difference method are developed to minimize the free energy …

Four Terminal Junction Field-Effect Transistor Model For Computer-Aided Design, Hao Ding

Electronic Theses and Dissertations

A compact model for four-terminal (independent top and bottom gates) junction field-effect transistor (JFET) is presented in this dissertation. The model describes the steady-state characteristics with a unified equation for all bias conditions that provides a high degree of accuracy and continuity of conductance, which are important for predictive analog circuit simulations. It also includes capacitance and leakage equations. A special capacitance drop-off phenomenon at the pinch-off region is studies and modeled. The operations of the junction fieldeffect transistor (JFET) with an oxide top-gate and full oxide isolation are analyzed, and a semi-physical compact model is developed. The effects of …

Study Of Nanoscale Cmos Device And Circuit Reliability, Chuanzhao Yu

Electronic Theses and Dissertations

The development of semiconductor technology has led to the significant scaling of the transistor dimensions -The transistor gate length drops down to tens of nanometers and the gate oxide thickness to 1 nm. In the future several years, the deep submicron devices will dominate the semiconductor industry for the high transistor density and the corresponding performance enhancement. For these devices, the reliability issues are the first concern for the commercialization. The major reliability issues caused by voltage and/or temperature stress are gate oxide breakdown (BD), hot carrier effects (HCs), and negative bias temperature instability (NBTI). They become even more important …

Modeling And Simulation Of Long Term Degradation And Lifetime Of Deep-Submicron Mos Device And Circuit, Zhi Cui

Electronic Theses and Dissertations

Long-term hot-carrier induced degradation of MOS devices has become more severe as the device size continues to scale down to submicron range. In our work, a simple yet effective method has been developed to provide the degradation laws with a better predictability. The method can be easily augmented into any of the existing degradation laws without requiring additional algorithm. With more accurate extrapolation method, we present a direct and accurate approach to modeling empirically the 0.18-ìm MOS reliability, which can predict the MOS lifetime as a function of drain voltage and channel length. With the further study on physical mechanism …

Channel Probing For An Indoor Wireless Communications Channel, Brandon Hunter

Theses and Dissertations

The statistics of the amplitude, time and angle of arrival of multipaths in an indoor environment are all necessary components of multipath models used to simulate the performance of spatial diversity in receive antenna configurations. The model presented by Saleh and Valenzuela, was added to by Spencer et. al., and included all three of these parameters for a 7 GHz channel. A system was built to measure these multipath parameters at 2.4 GHz for multiple locations in an indoor environment. Another system was built to measure the angle of transmission for a 6 GHz channel. The addition of this parameter …

A Method Of Modeling Multirate Two-Dimensional Recursive Digital Filters Author, Albert P. Gerheim

Electrical & Computer Engineering Theses & Dissertations

This dissertation presents a method of modeling two dimensional sampled data systems with two sampling rates in each dimension. This methodology is applied to the problem of synthesizing two dimensional velocity filters using one dimensional prototypes and multirate concepts.

The modeling method includes the replacement of scalar z-transforms of signals by vectors of polynomials, and the replacement of scalar z-transforms of impulse responses by matrices of polynomials.

The synthesis of velocity filters is accomplished through the use of coordinate transformations in the z-transform domain which skew the ω₁ -ω₂ axes on the unit bidisc. The filters synthesized using …