Deformation Mechanism And Process Optimization Of Mechanical Clinching Joining Technology Used For Steel And Aluminum Alloy Sheets, 2016 Wuhan University of Technology; Hubei Collaborative Innovation Center for Automotive Components Technology
Deformation Mechanism And Process Optimization Of Mechanical Clinching Joining Technology Used For Steel And Aluminum Alloy Sheets, Yanli Song, Genpeng Zhu, Lin Hua, Dingguo Dai
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Plastic Deformation And Microstructure Evolution Of Bearing Ring Blank During Cold Rolling Process, 2016 Wuhan University of Technology
Plastic Deformation And Microstructure Evolution Of Bearing Ring Blank During Cold Rolling Process, Song Deng
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
The Influence Of Welding Parameters On Initial Instability Dynamics During Solidification, 2016 Nanjing University of Aeronautics and Astronautics
The Influence Of Welding Parameters On Initial Instability Dynamics During Solidification, Fengyi Yu, Yanhong Wei, Xiaohong Zhan
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Prediction Of The Graphite Morphology And Nodularity Based On The Quantitative Sample Solidification Cooling Curves, 2016 Nanchang University
Prediction Of The Graphite Morphology And Nodularity Based On The Quantitative Sample Solidification Cooling Curves, Han Ye, Chao Li, Qingyou Han, Xiangjie Yang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Process Optimization Of Water Chamber Based On Numerical Simulation, 2016 Sichuan University
Process Optimization Of Water Chamber Based On Numerical Simulation, Yang Jian Ning, Yang Yi, Yang Gang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Mhd Modeling Of A Copper Slag Cleaning Process, 2016 Central Institute of Engineering, Electronics and Analytics (ZEA) – Engineering and Technology (ZEA-1)
Mhd Modeling Of A Copper Slag Cleaning Process, Hongkun Yang, Jörg Wolters, Helmut Soltner, Phillip Pischke, Sven Eckert, Jochen Fröhlich
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Acoustic Holographic Rendering With Two-Dimensional Metamaterial-Based Passive Phased Array., 2016 Rowan University
Acoustic Holographic Rendering With Two-Dimensional Metamaterial-Based Passive Phased Array., Yangbo Xie, Chen Shen, Wenqi Wang, Junfei Li, Dingjie Suo, Bogdan-Ioan Popa, Yun Jing, Steven A Cummer
Henry M. Rowan College of Engineering Faculty Scholarship
Acoustic holographic rendering in complete analogy with optical holography are useful for various applications, ranging from multi-focal lensing, multiplexed sensing and synthesizing three-dimensional complex sound fields. Conventional approaches rely on a large number of active transducers and phase shifting circuits. In this paper we show that by using passive metamaterials as subwavelength pixels, holographic rendering can be achieved without cumbersome circuitry and with only a single transducer, thus significantly reducing system complexity. Such metamaterial-based holograms can serve as versatile platforms for various advanced acoustic wave manipulation and signal modulation, leading to new possibilities in acoustic sensing, energy deposition and medical …
Influence Of Imperfections On Carbon Nanotube Properties, 2016 University of Rijeka
Influence Of Imperfections On Carbon Nanotube Properties, Marino Brcic, Marko Canadija, Josip Brnic
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Temperature Filed Numerical Simulation Of Laser Welding For Ta15 Titanium Alloy By Coupling Thermal And Phase Transformation, 2016 Nanjing University of Aeronautics and Astronautics
Temperature Filed Numerical Simulation Of Laser Welding For Ta15 Titanium Alloy By Coupling Thermal And Phase Transformation, Wenmin Ou, Yanhong Wei, Xiaohong Zhan, Gaoyang Mi
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Numerical Simulation Of The Influence Of Ceramic Preform On The Infiltration Process Of Metal Matrix Composites, 2016 Huazhong University of Science and Technology
Numerical Simulation Of The Influence Of Ceramic Preform On The Infiltration Process Of Metal Matrix Composites, Chang-Chun Dong, Jian-Xin Zhou, Ya-Jun Yin, Xu Shen
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Modeling On Tail Pinch In Finishing Rolls During Hot Strip Rolling, 2016 National Chung Cheng University
Modeling On Tail Pinch In Finishing Rolls During Hot Strip Rolling, Jong-Ning Aoh, Han-Kai Hsu, Ming-Fa Chen
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Multi-Dome Forming Of A Ti–Al–Mn Alloy, 2016 National Research University Higher School of Economics
Multi-Dome Forming Of A Ti–Al–Mn Alloy, Sergey Aksenov, Aleksey Kolesnikov, Ivan Zakhariev
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Numerical Simulation Of The Through Process Of Aerospace Titanium Alloy Casting Filling, Solidification, And Hot Isostatic Pressing, 2016 Huazhong University of Science and Technology
Numerical Simulation Of The Through Process Of Aerospace Titanium Alloy Casting Filling, Solidification, And Hot Isostatic Pressing, Jian-Xin Zhou, Zhao Guo, Ya-Jun Yin, Chang-Chang Liu
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Analysis On The Action Of Oxidant In Chemical Mechanical Polishing Of 304 Ultra-Thin Stainless Steel, 2016 Henan Institute of Science and Technology
Analysis On The Action Of Oxidant In Chemical Mechanical Polishing Of 304 Ultra-Thin Stainless Steel, Jianxiu Su
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Deformation And Stress Control Study On H-Beam Welded By Ultra High-Strength Steel, 2016 Welding and Corrosion Protection Technology Department Research Institute
Deformation And Stress Control Study On H-Beam Welded By Ultra High-Strength Steel, Zhaoxia Qu, Xiaojie Wang, Liqian Xia, Zhongqu Sun
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Properties That Characterize The Material X46cr13 Steel, 2016 University of Rijeka
Properties That Characterize The Material X46cr13 Steel, Josip Brnic, Sanjin Krscanski, Marino Brcic, Jitai Niu
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Dynamic Visualization Of Weld Pool And Appearance For Manual Arc Welding Based On Quasi 3d Mesh Method, 2016 Xi’an Jiaotong University
Dynamic Visualization Of Weld Pool And Appearance For Manual Arc Welding Based On Quasi 3d Mesh Method, Zhe Li, Zhenzhen Xu, Jianxun Zhang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Simulation On The Sealing Of Aluminum Ball Joint, 2016 Shanghai Second Polytechnic University
Simulation On The Sealing Of Aluminum Ball Joint, Haobin Tian, Xiaohang Liu, Xuelei Li, Jun Feng
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
Simulation Of The Influence Of Preheating On Stress Distribution During Multi-Pass Repair Welding Of Cast Steel, 2016 Huazhong University of Science and Technology
Simulation Of The Influence Of Preheating On Stress Distribution During Multi-Pass Repair Welding Of Cast Steel, Wen Wang, Jian-Xin Zhou, Ya-Jun Yin
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.
The Phenomenon Of High Frequency Confinement On Tig Arc In Tig Arc Welding, 2016 Shenyang University of Technolgy
The Phenomenon Of High Frequency Confinement On Tig Arc In Tig Arc Welding, Yunlong Chang
The 8th International Conference on Physical and Numerical Simulation of Materials Processing
No abstract provided.