Optics Commons^™

Simultaneous Measurement Of Complementary Observables With Compressive Sensing, Gregory A. Howland, James Schneeloch, Daniel J. Lum, John C. Howell

Mathematics, Physics, and Computer Science Faculty Articles and Research

The more information a measurement provides about a quantum system’s position statistics, the less information a subsequent measurement can provide about the system’s momentum statistics. This information trade-off is embodied in the entropic formulation of the uncertainty principle. Traditionally, uncertainly relations correspond to resolution limits; increasing a detector’s position sensitivity decreases its momentum sensitivity and vice versa. However, this is not required in general; for example, position information can instead be extracted at the cost of noise in momentum. Using random, partial projections in position followed by strong measurements in momentum, we efficiently determine the transverse-position and transverse-momentum distributions of …

Midlatitude Mesospheric Temperature Anomalies During Major Ssw Events As Observed With Rayleigh-Scatter Lidar, Leda Sox, Vincent B. Wickwar, Chad Fish, Joshua P. Herron

Graduate Student Posters

While the mesospheric temperature anomalies associated with Sudden Stratospheric Warmings (SSWs) have been observed extensively in the polar regions, observations of these anomalies at midlatitudes are sparse. The original Rayleigh-scatter lidar that operated at the Atmospheric Lidar Observatory (ALO; 41.7°N, 111.8°W) in the Center for Atmospheric and Space Sciences (CASS) on the campus of Utah State University (USU) collected a very dense set of temperature data for 11 years, from 1993 through 2004. The temperatures derived from these data extended over the mesosphere, from 45 to 90 km. This work focuses on the extensive Rayleigh lidar observations made during seven …

Intensity Interferometry Experiment, Christy Rose Pedraza

Physics

In this experiment we investigate the correlations in the intensity of diffracted light using an interferometer similar to Hanbury Brown and Twiss’. We use a pseudo-thermal light source composed of a laser and a rotating ground-glass screen with detection by silicon photodiodes. The experimental results agree with the theory that describes the correlation between spatially separated parts of the intensity field.

Laser Doppler Velocimetry: Flow Measurement Using A Digital Micromirror Device, Dawei Kuo

Physics

In this experiment we utilize a Texas Instruments Digital Micromirror Device to impart a phase shift to the beams of a laser Doppler velocimeter. The advantages of this approach include low cost, low power consumption, a precisely known phase-stepping frequency, and the capability of working with a broad range of optical wavelengths. The velocities measured with the set up shown here are of order 1 cm/s.

Improving Hybrid Solar Cells: Overcoming Charge Extraction Issues In Bulk Mixtures Of Polythiophenes And Zinc Oxide Nanostructures, Grant T. Olson

Master's Theses

Organic photovoltaics (OPVs) have received a great deal of focus in recent years as a possible alternative to expensive silicon based solar technology. Current challenges for organic photovoltaics are centered around improving their lifetimes and increasing their power conversion efficiencies. One approach to improving the lifetime of such devices has been the inclusion of inorganic metal oxide layers, but interaction between the metal oxides and common conjugated polymers is not favorable. Here we present two methods by which the interactions between polythiophenes and nanostructured ZnO can be made to be more favorable. Using the first method, direct side on attachment …

Zinc Oxide Random Laser Threshold Enhancement Via Addition Of Passive Scatterers, Zachariah M. Peterson, Rolf Könenkamp, Robert Campbell Word

Student Research Symposium

Zinc oxide (ZnO) is a wide bandgap n-type semiconductor with a variety of optical and electrical applications and many methods of fabrication. Strong optical scattering and photoluminescence from ZnO nanoparticles and films makes the material an ideal candidate for a random laser. Previous studies have shown both incoherent and coherent random lasing from ZnO films and particles agglomerations. When used as a passive scatterer in a laser dye gain medium, the addition of ZnO has been shown to improve the threshold for lasing. By combining active scattering ZnO with a passive scatterer, MgO, we show here that the lasing threshold …

A Study Of Scattering Characteristics For Micro-Scale Rough Surface, Yonghee Won

Graduate Theses - Physics and Optical Engineering

Defining the scatter characteristics of surfaces plays an important role in various technology industries such as the semiconductor, automobile, and military industries. Scattering can be used to inspect products for problems created during the manufacturing process and to generate the specifications for engineers. In particular, scattering measurement systems and models have been developed to define the surface properties of a wide variety of materials used in manufacturing. However, most previous research has been focused on very smooth surfaces as a nano-scale roughness. The research in this paper uses the Bidirectional Reflectance Distribution Function (BRDF) and focuses on defining the scattering …

Atomic-Scale Characterization And Manipulation Of Freestanding Graphene Using Adapted Capabilities Of A Scanning Tunneling Microscope, Steven Barber

Graduate Theses and Dissertations

Graphene was the first two-dimensional material ever discovered, and it exhibits many unusual phenomena important to both pure and applied physics. To ensure the purest electronic structure, or to study graphene's elastic properties, it is often suspended over holes or trenches in a substrate. The aim of the research presented in this dissertation was to develop methods for characterizing and manipulating freestanding graphene on the atomic scale using a scanning tunneling microscope (STM). Conventional microscopy and spectroscopy techniques must be carefully reconsidered to account for movement of the extremely flexible sample.

First, the acquisition of atomic-scale images of freestanding graphene …

Study Of The Motility Of Biological Cells By Digital Holographic Microscopy, Xiao Yu

USF Tampa Graduate Theses and Dissertations

In this dissertation, I utilize digital holographic microscopy (DHM) to study the motility of biological cells. As an important feature of DHM, quantitative phase microscopy by digital holography (DH-QPM) is applied to study the cell-substrate interactions and migratory behavior of adhesive cells. The traction force exerted by biological cells is visualized as distortions in flexible substrata. Motile fibroblasts produce wrinkles when attached to a silicone rubber film. For the non-wrinkling elastic substrate polyacrylamide (PAA), surface deformation due to fibroblast adhesion and motility is visualized as tangential and vertical displacement. This surface deformation and the associated cellular traction forces are measured …

Supersymmetric Mode Converters, Matthias Heinrich, Mohammad-Ali Miri, Simon Stützer, Ramy El-Ganainy, Stefan Nolte, Alexander Szameit, Demetrios N. Christodoulides

Department of Physics Publications

Originally developed in the context of quantum field theory, the concept of supersymmetry can be used to systematically design a new class of optical structures. In this work, we demonstrate how key features arising from optical supersymmetry can be exploited to control the flow of light for mode division multiplexing applications. Superpartner configurations are experimentally realized in coupled optical networks, and the corresponding light dynamics in such systems are directly observed. We show that supersymmetry can be judiciously utilized to remove the fundamental mode of a multimode optical structure, while establishing global phase matching conditions for the remaining set of …

Numerical Examination Of The Nonlinear Dynamics Of A Hybrid Acousto-Optic Bragg Cell With Positive Feedback Under Profiled Beam Propagation, Fares S. Almehmadi, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

In standard weak interaction theory, acousto-optic Bragg analysis typically assumes that the incident light and sound beams are uniform plane waves. Acousto-optic Bragg diffraction with nonuniform profiled input beams is numerically examined under open loop via a transfer function formalism. Unexpected deviations in the first-order diffracted beam from the standard theory are observed for high �� values. These deviations are significant because the corresponding closed-loop system is sensitive to input amplitudes and initial conditions, and the overall impact on the dynamical behavior has not been studied previously in standard analyses. To explore the effect of such nonuniform output profiles on …

Multiframe Adaptive Wiener Filter Super-Resolution With Jpeg2000-Compressed Images, Barath Narayanan Narayanan, Russell C. Hardie, Eric J. Balster

Electrical and Computer Engineering Faculty Publications

Historically, Joint Photographic Experts Group 2000 (JPEG2000) image compression and multiframe super-resolution (SR) image processing techniques have evolved separately. In this paper, we propose and compare novel processing architectures for applying multiframe SR with JPEG2000 compression. We propose a modified adaptive Wiener filter (AWF) SR method and study its performance as JPEG2000 is incorporated in different ways. In particular, we perform compression prior to SR and compare this to compression after SR. We also compare both independent-frame compression and difference-frame compression approaches. We find that some of the SR artifacts that result from compression can be reduced by decreasing the …

Microfiber Coupler Based Label-Free Immunosensor, Lin Bo, Christy Charlton O'Mahony, Yuliya Semenova, Niamh Gilmartin, Pengfei Wang, Gerald Farrell

Articles

Optical microfibers and related structures which incorporate large evanescent field and minimal size offer new opportunities for biosensing applications. In this paper we report the development of an immunosensor based on a tapered microfiber coupler embedded in a low refractive index polymer. Biomolecules adsorbed on the microfiber coupler surface modify the surrounding refractive index. By immobilizing antigens on the surface of the sensing area, the microfiber coupler was able to operate as a label-free immunosensor to detect specific antibodies. We experimentally demonstrated for the first time the sensing ability of this sensor using a fibrinogen antigen-antibody pair. By monitoring the …

Memristor-Based Neuron Circuit And Method For Applying Learning Algorithm In Spice, Christopher Yakopcic, R. Hasan, T.M. Taha, M. Mclean, D. Palmer

Electrical and Computer Engineering Faculty Publications

The learning of nonlinearly separable functions in cascaded memristor crossbar circuits is described and the feasibility of using them to develop low-power neuromorphic processors is demonstrated. This is the first study evaluating the training of memristor crossbars through SPICE simulations. It is important to capture the alternate current paths and wire resistance inherent in these circuits. The simulations show that neural network learning algorithms are able to train in the presence of alternate current paths and wire resistances. The fact that the approach reduces the area by three times and power by two orders of magnitude compared with the existing …

Model Uncertainty And Test Of A Segmented Mirror Telescope, Luke C. Dras

Theses and Dissertations

The future of large aperture telescopes relies heavily on the development of segmented array designs. Today's monolithic mirror technology has reached a barrier, particularly for space-based telescopes. These large diameter, dense mirrors allow stable high-resolution imaging but are incompatible with optimized space launch. Segmented mirror telescopes are designed to balance lightweight with compact stowage. The structure necessary to support the flexible mirror array often combines isogrid geometry and complex actuation hardware. High-fidelity finite element models are commonly used to economically predict how the optics will perform under different environmental conditions. The research detailed herein integrates superelement partitioning and complexity simplifying …

Direct Emissivity Measurements Of Painted Metals For Improved Temperature Estimation During Laser Damage Testing, Sean M. Baumann

Theses and Dissertations

A database of spectral, temperature dependent emissivities was created for a range of painted aluminum laser damage testing targets with the purpose of improving accuracy in temperature estimates on front and back target surfaces during laser damage tests. Previous temperature estimations were made by fitting an assumed graybody radiance curve to the radiance measured from the back surface via a Telops imaging Fourier transform spectrometer. In this work, spectral emissivity measurements were made using an SOC-100 hemispherical directional reflectometer and Nicolet Fourier transform infrared spectrometer. Of particular interest was a high temperature matte black enamel paint used to coat the …

Numerical Analysis Of First-Order Acousto-Optic Bragg Diffraction Of Profiled Optical Beams Using Open-Loop Transfer Functions, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

In standard acousto-optic Bragg analysis, the incident light and sound beams are assumed to be uniform plane waves (with constant profiles) leading to the results based on standard weak interaction theory. As a follow-up to earlier work dealing with nonuniform incident optical beams, we revisit the problem of Bragg diffraction under nonuniform profiles, and include Gaussian, third-order Hermite–Gaussian, and zeroth-order Bessel profiles in our investigation, along with a few others. The first-order diffracted beam is examined (using a transfer function formalism based on angular spectra) under several parametric limits [such as the Klein–Cook parameter Q, the effective profile width, and …

Range Finding With A Plenoptic Camera, Robert A. Raynor

Theses and Dissertations

The plenoptic camera enables simultaneous collection of imagery and depth information by sampling the 4D light field. The light field is distinguished from data sets collected by stereoscopic systems because it contains images obtained by an N by N grid of apertures, rather than just the two apertures of the stereoscopic system. By adjusting parameters of the camera construction, it is possible to alter the number of these `subaperture images,' often at the cost of spatial resolution within each. This research examines a variety of methods of estimating depth by determining correspondences between subaperture images. A major finding is that …

Comparative Analysis Of Reconstructed Image Quality In A Simulated Chromotomographic Imager, Ryan L. Tervo

Theses and Dissertations

A hyperspectral chromotomographic instrument has been developed to determine the spatial and spectral distribution of a target. It does this by recording the dispersed images produced by a rotating direct vision prism with a high speed camera. The recorded images are processed through a tomographic reconstruction algorithm to produce a reconstructed hypercube. A physics-based system model was developed to investigate three areas. The first was how the prism angle selection and range of angles used impacted the reconstructed image quality. The second was an assessment of a new iterative reconstruction algorithm developed to remove artifacts produced in the Back Projection …

Monitoring Atom Traps For Neutral Atom Quantum Computing, Taylor Shannon

Physics

To increase computing power for numerous practical advantages, scientists are actively researching the field of quantum computing. Neutral atom quantum computing is a promising avenue towards building a quantum computer that satisfies four of the five DiVincenzo criteria. This involves a magneto-optical trap to cool the atoms and move them to a cloud in the center of a vacuum chamber. Then laser light will be shone through an array of pinholes to trap the atoms in an array of dipole traps. In order to ensure the atoms are trapped, I have set up an imaging system that consists of a …