Optics Commons^™

Optimization-Free Optical Focal Field Engineering Through Reversing The Radiation Pattern From A Uniform Line Source, Yanzhong Yu, Qiwen Zhan

Electro-Optics and Photonics Faculty Publications

A simple and flexible method is presented for the generation of optical focal field with prescribed characteristics. By reversing the field pattern radiated from a uniform line source, for which the electric current is constant along its extent, situated at the focus of a 4Pi focusing system formed by two confocal high-NA objective lenses, the required illumination distribution at the pupil plane for creating optical focal field with desired properties can be obtained. Numerical example shows that an arbitrary length optical needle with extremely high longitudinal polarization purity and consistent transverse size of ~0.36λ over the entire depth of focus …

Simulation Of Light Scattering From Brownian Particles, Raymond Mullen

Physics

This project is a computational exploration of the light scattering from Brownian particles. We simulate laser light scattering to produce fluctuating light intensity at a detector located in the far-field. By analyzing the statistical properties of this intensity fluctuation, and knowing physical parameters of the system, we can deduce the size of the scattering particles. The computer simulation is in excellent agreement with theory.

Demonstrating Continuous Variable Einstein–Podolsky–Rosen Steering In Spite Of Finite Experimental Capabilities Using Fano Steering Bounds, James Schneeloch, Samuel H. Knarr, Gregory A. Howland, John C. Howell

Mathematics, Physics, and Computer Science Faculty Articles and Research

We show how one can demonstrate continuous-variable Einstein–Podolsky–Rosen (EPR) steering without needing to characterize entire measurement probability distributions. To do this, we develop a modified Fano inequality useful for discrete measurements of continuous variables and use it to bound the conditional uncertainties in continuous-variable entropic EPR-steering inequalities. With these bounds, we show how one can hedge against experimental limitations including a finite detector size, dead space between pixels, and any such factors that impose an incomplete sampling of the true measurement probability distribution. Furthermore, we use experimental data from the position and momentum statistics of entangled photon pairs in parametric …

Coherent Digital Holographic Adaptive Optics, Changgeng Liu

USF Tampa Graduate Theses and Dissertations

A new type of adaptive optics (AO) based on the principles of digital holography (DH) is proposed and developed for the use in wide-field and confocal retinal imaging. Digital holographic adaptive optics (DHAO) dispenses with the wavefront sensor and wavefront corrector of the conventional AO system. DH is an emergent imaging technology that gives direct numerical access to the phase of the optical field, thus allowing precise control and manipulation of the optical field. Incorporation of DH in an ophthalmic imaging system can lead to versatile imaging capabilities at substantially reduced complexity and cost of the instrument. A typical conventional …

Tunable Narrow Band Difference Frequency Thz Wave Generation In Dast Via Dual Seed Ppln Opg, Brian Dolasinski, Peter E. Powers, Joseph W. Haus, Adam Cooney

Electro-Optics and Photonics Faculty Publications

We report a widely tunable narrowband terahertz (THz) source via difference frequency generation (DFG). A narrowband THz source uses the output of dual seeded periodically poled lithium niobate (PPLN) optical parametric generators (OPG) combined in the nonlinear crystal 4-dimthylamino-N-methyl-4-stilbazolium-tosylate (DAST). We demonstrate a seamlessly tunable THZ output that tunes from 1.5 THz to 27 THz with a minimum bandwidth of 3.1 GHz. The effects of dispersive phase matching, two-photon absorption, and polarization were examined and compared to a power emission model that consisted of the current accepted parameters of DAST.

Secure Transmission Of Static And Dynamic Images Via Chaotic Encryption In Acousto-Optic Hybrid Feedback With Profiled Light Beams, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Secure information encryption via acousto-optic (AO) chaos with profiled optical beams indicates substantially better performance in terms of system robustness. This paper examines encryption of static and time-varying (video) images onto AO chaotic carriers using Gaussian-profile beams with diffracted data numerically generated using transfer functions. The use of profiled beams leads to considerable improvement in the encrypted signal.

While static image encryption exhibits parameter tolerances within about ±10% for uniform optical beams, profiled beams reduce the tolerance to less than 1%, thereby vastly improving both the overall security of the transmitted information as well as the quality of the image …

Multiple Object Detection In Hyperspectral Imagery Using Spectral Fringe-Adjusted Joint Transform Correlator, Paheding Sidike, Vijayan K. Asari, Mohammad S. Alam

Electrical and Computer Engineering Faculty Publications

Hyperspectral imaging (HSI) sensors provide plenty of spectral information to uniquely identify materials by their reflectance spectra, and this information has been effectively used for object detection and identification applications. Joint transform correlation (JTC) based object detection techniques in HSI have been proposed in the literatures, such as spectral fringe-adjusted joint transform correlation (SFJTC) and with its several improvements.

However, to our knowledge, the SFJTC based techniques were designed to detect only similar patterns in hyperspectral data cube and not for dissimilar patterns. Thus, in this paper, a new deterministic object detection approach using SFJTC is proposed to perform multiple …

Two-Dimensional Temperature Analysis Of Nuclear Fireballs Using Digitized Film, Robert C. Slaughter, Tyler R. Peery, John W. Mcclory

Faculty Publications

Researchers at Lawrence Livermore National Laboratory have begun digitizing technical films spanning the atmospheric nuclear testing operations conducted by the United States from 1945 through 1962. Each atmospheric nuclear test was filmed by Edgerton, Germeshausen, and Grier, Inc., using between 20 to 40 cameras per test. These technical film test data represent a primary source for advancing the knowledge of nuclear weapon output as well as the understanding of nonnuclear high-temperature gases. This manuscript outlines the procedures followed in order to perform two-dimensional temperature calculations for early time nuclear fireballs using digitized film. The digitized optical densities of the film …

Macular Pigment Spatial Distribution Effects On Glare Disability, Christopher Putnam, Carl Bassi

College of Optometry Faculty Works

Purpose This project explored the relationship of the macular pigment optical density (MPOD) spatial profile with measures of glare disability (GD) across the macula. Results The cHFP identified reliable MPOD spatial distribution maps demonstrating a 1st-order exponential decay as a function of increasing eccentricity. There was a significant negative correlation between both measures of foveal MPOD and GD using 6cycles per degree (cpd) and 9cpd stimuli. Significant correlations were found between corresponding parafoveal MPOD measures and GD at 2 and 4° of eccentricity using 9cpd stimuli with greater MPOD associated with less glare disability. Conclusions These results are consistent with …

Geometry Induced Magneto-Optic Effects In Lpe Grown Magnetic Garnet Films, Ashim Chakravarty

Dissertations, Master's Theses and Master's Reports - Open

This dissertation addresses dimensionality-induced magneto-optic effects in liquid-phaseepitaxy magnetic garnet thin films. It is found that the Faraday rotation (FR) per unit length evinces a marked and steady enhancement as the film thickness is reduced below ~100 nm in Bi_0.8Gd_0.2Lu₂Fe₅O₁₂, although it remains constant in the micron- and most of the submicron- regime. The reported specific FR change in such reduced dimensions is due to sizedependent modifications in diamagnetic transition processes in the garnet film. These processes correspond to the electronic transitions from the singlet ⁶S ground state to …

Role Of Antenna Modes And Field Enhancement In Second Harmonic Generation From Dipole Nanoantennas, Domenico De Ceglia, Maria Antonietta Vincenti, Costantino De Angelis, Andrea Locatelli, Joseph W. Haus, Michael Scalora

Electro-Optics and Photonics Faculty Publications

We study optical second harmonic generation from metallic dipole antennas with narrow gaps. Enhancement of the fundamental-frequency field in the gap region plays a marginal role on conversion efficiency. In the symmetric configuration, i.e., with the gap located at the center of the antenna axis, reducing gap size induces a significant red-shift of the maximum conversion efficiency peak. Either enhancement or inhibition of second-harmonic emission may be observed as gap size is decreased, depending on the antenna mode excited at the harmonic frequency. The second-harmonic signal is extremely sensitive to the asymmetry introduced by gap’s displacements with respect to the …

Impact Of Detector-Element Active-Area Shape And Fill Factor On Image Sampling, Restoration, And Super-Resolution, Russell C. Hardie, Douglas R. Droege, Alexander J. Dapore, Mark E. Greiner

Electrical and Computer Engineering Faculty Publications

In many undersampled imaging systems, spatial integration from the individual detector elements is the dominant component of the system point spread function (PSF). Conventional focal plane arrays (FPAs) utilize square detector elements with a nearly 100% fill factor, where fill factor is defined as the fraction of the detector element area that is active in light detection. A large fill factor is generally considered to be desirable because more photons are collected for a given pitch, and this leads to a higher signal-to-noise-ratio (SNR). However, the large active area works against super-resolution (SR) image restoration by acting as an additional …

True Linearized Intensity Modulation For Photonic Analog To Digital Conversion Using An Injection-Locked Mode-Locked Laser, Edris Sarailou

Electronic Theses and Dissertations

A true linearized interferometric intensity modulator for pulsed light has been proposed and experimentally presented in this thesis. This has been achieved by introducing a mode-locked laser into one of the arms of a Mach-Zehnder interferometer and injection-locking it to the input light (which is pulsed and periodic). By modulating the injection-locked laser, and combining its output light with the light from the other arm of interferometer in quadrature, one can achieve true linearized intensity modulator. This linearity comes from the arcsine phase response of the injection-locked mode-locked laser (as suggested by steady-state solution of Adler's equation) when it is …

An Optical Sprayer Nozzle Flow Rate Sensor, Joseph S. Dvorak, Luke E. Bryant

Biosystems and Agricultural Engineering Faculty Publications

Ensuring proper flow rates from each nozzle on an agricultural sprayer has become even more important as advances continue to be made in precision application technology. In this article, we describe the structure and testing of a sensor technology based on optical cross-correlation to determine the flow rate of individual sprayer nozzles. An advantage of this technology is that it does not require that impellers or other components be placed in the flow, which could cause plugging. The only moving part in the entire system is a solenoid used to inject a tracer dye. The objective of this study was …

A Collaborative Adaptive Wiener Filter For Multi-Frame Super-Resolution, Khaled M. Mohamed, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Factors that can limit the effective resolution of an imaging system may include aliasing from under-sampling, blur from the optics and external factors, and sensor noise. Image restoration and super-resolution (SR) techniques can be used to improve image resolution. One SR method, developed recently, is the adaptive Wiener filter (AWF) SR algorithm. This is a multi-frame SR method that combines registered temporal frames through a joint nonuniform interpolation and restoration process to provide a high-resolution image estimate. Variations of this method have been demonstrated to be effective for multi-frame SR, as well demosaicing RGB and polarimetric imagery. While the AWF …

Robust Super-Resolution By Fusion Of Interpolated Frames For Color And Grayscale Images, Barry K. Karch, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Multi-frame super-resolution (SR) processing seeks to overcome undersampling issues that can lead to undesirable aliasing artifacts in imaging systems. A key factor in effective multi-frame SR is accurate subpixel inter-frame registration. Accurate registration is more difficult when frame-to-frame motion does not contain simple global translation and includes locally moving scene objects. SR processing is further complicated when the camera captures full color by using a Bayer color filter array (CFA). Various aspects of these SR challenges have been previously investigated. Fast SR algorithms tend to have difficulty accommodating complex motion and CFA sensors. Furthermore, methods that can tolerate these complexities …

Construction And Optimization Of A Tapered Amplifier System For Applications In Ultra-Cold Plasma Research, Ryan Cole

Honors Theses

The number density of cold atoms confined in a magneto-optical trap (MOT) is critically dependent on the intensity of the lasers used to cool the sample. To generate large optical powers while retaining the practicality of homemade external cavity diode lasers (ECDLs), a tapered amplifier (TA) system was designed and constructed to amplify the output of an existing 780 nm, continuous-wave ECDL. The amplifier’s performance is discussed in terms of its gain and power output. Under standard operating conditions, optical amplification of 12 dB is achieved, with a maximum power output of 0.75 W. The completed amplifier is installed into …

Novel Techniques For Quasi Three-Dimensional Nanofabrication Of Transformation Optics Devices, Paul R. West

Open Access Dissertations

Current nanofabrication is almost exclusively limited to top-down, two-dimensional techniques. As technology moves more deeply into the nano-scale regime, fabrication of new devices with quasi three-dimensional geometries shows great potential. One excellent example of an emerging field that requires this type of non-conformal 3D fabrication technique is the field of Transformation Optics. This field involves transforming and manipulating the optical space through which light propagates. Arbitrarily manipulating the optical space requires advanced fabrication techniques, which are not possible with current two-dimensional fabrication technologies. One step toward quasi three-dimensional nanofabrication involves employing angled deposition allowing new growth mechanisms, and enabling a …

Optical Metrology For Directed Self-Assembly Patterning Using Mueller Matrix Spectroscopic Ellipsometry Based Scatterometry, Dhairya J. Dixit

Legacy Theses & Dissertations (2009 - 2024)

The semiconductor industry continues to drive patterning solutions that enable devices with higher memory storage capacity, faster computing performance, lower cost per transistors, and higher transistor density. These developments in the field of semiconductor manufacturing along with the overall minimization of the size of transistors require cutting-edge metrology tools for characterization.

An Assessment Of Critical Dimension Small Angle X-Ray Scattering Metrology For Advanced Semiconductor Manufacturing, Charles Michael Settens

Legacy Theses & Dissertations (2009 - 2024)

Simultaneous migration of planar transistors to FinFET architectures, the introduction of a plurality of materials to ensure suitable electrical characteristics, and the establishment of reliable multiple patterning lithography schemes to pattern sub-10 nm feature sizes imposes formidable challenges to current in-line dimensional metrologies. Because the shape of a FinFET channel cross-section immediately influences the electrical characteristics, the evaluation of 3D device structures requires measurement of parameters beyond traditional critical dimension (CD), including their sidewall angles, top corner rounding and footing, roughness, recesses and undercuts at single nanometer dimensions; thus, metrologies require sub-nm and approaching atomic level measurement uncertainty.