Optics Commons^™

The Hitran2016 Molecular Spectroscopic Database, I. E. Gordon, L. S. Rothman, C. Hill, R. V. Kochanov, Y. Tan, P. F. Bernath, M. Birk, V. Boudon, A. Campargue, K. V. Chance

Chemistry & Biochemistry Faculty Publications

This paper describes the contents of the 2016 edition of the HITRAN molecular spectroscopic compilation. The new edition replaces the previous HITRAN edition of 2012 and its updates during the intervening years. The HITRAN molecular absorption compilation is composed of five major components: the traditional line-by-line spectroscopic parameters required for high-resolution radiative-transfer codes, infrared absorption cross-sections for molecules not yet amenable to representation in a line-by-line form, collision-induced absorption data, aerosol indices of refraction, and general tables such as partition sums that apply globally to the data. The new HITRAN is greatly extended in terms of accuracy, spectral coverage, additional …

Raman Microscopic Analysis Of Internal Stress In Boron-Doped Diamond Thin Films, Emma M.A. Sundin

Open Access Theses & Dissertations

The correlations between induced stress on undoped and boron-doped diamond (BDD) thin films, sample chemical composition, and fabrication substrate are investigated in this study via confocal Raman microspectroscopic analysis. Stability of BDD films is relevant to fast-scan cyclic voltammetry, as film delamination and dislocation of BDD-coated electrodes that can occur during neurosurgical electrode implantation can negatively impact the biosensing reliability of this technique. Electrodes were fabricated by coating cylindrical tungsten rods using a custom-built chemical vapor deposition reactor. The results of the analysis reveal a direct correlation between regions of pure diamond and enhanced material stress, as well as preferential …

Bragg Gratings In Polarization Maintaining Optical Fiber As Three Dimensional Strain Sensor, Joel Quintana

Open Access Theses & Dissertations

Fiber-Bragg Gratings (FBG) for Structural Health Monitoring (SHM) have been studied extensively as they offer electrically passive operation, electromagnetic interference (EMI) immunity, high sensitivity and multiplexing as compared to conventional electric strain sensors. FBG sensors written within polarization maintaining (PM) optical fiber offer ad- ditional dimensions of strain measurement, greatly reducing the number of sensors needed to properly monitor a structure. This reduction however, adds complexity to the dis- crimination of the sensorâ??s optical response to its corresponding applied strains. This Dissertation defines the set of algorithms needed to measure planar strain using PM-FBGs exclusively. It defines the minimum number …

Imaging Live Drosophila Brain With Two-Photon Fluorescence Microscopy, Syeed Ehsan Ahmed

Open Access Theses & Dissertations

Two-photon fluorescence microscopy is an imaging technique which delivers distinct benefits for in vivo cellular and molecular imaging. Cyclic adenosine monophosphate (cAMP), a second messenger molecule, is responsible for triggering many physiological changes in neural system. However, the mechanism by which this molecule regulates responses in neuron cells is not yet clearly understood. When cAMP binds to a target protein, it changes the structure of that protein. Therefore, studying this molecular structure change with fluorescence resonance energy transfer (FRET) imaging can shed light on the cAMP functioning mechanism. FRET is a non-radiative dipole-dipole coupling which is sensitive to small distance …

Advancing Vibrational Spectroscopy For Cellular And Sub Cellular Analysis: Raman Spectroscopy As An In Vitro Chemotherapeutic Screeening And Assessment Protocol, Zeineb Farhane

Doctoral

Vibrational spectroscopy, including Raman micro-spectroscopy, has attracted considerable attention over the last few years, as a powerful, non-invasive tool for clinical applications, especially in cancer diagnosis, in vivo and ex vivo. As a molecular fingerprinting technique with optical resolution, Raman micro-spectroscopy is able to monitor biochemical processes, drug uptake, efficacy and mode of action and mechanisms of interaction of chemotherapeutic drugs at a subcellular level. In vitro applications may be more strategically achievable, and can help guide drug design and discovery, and eventually evaluate To this end, different lung cell lines were used and Raman micro-spectroscopy was coupled to valuable …

High Performance Liquid Crystals For Displays And Spatial Light Modulators, Fenglin Peng

Electronic Theses and Dissertations

Liquid crystals (LCs) are an amazing class of soft materials which have been widely used in the visible, infrared (IR), millimeter wave, and terahertz spectral regions. Both amplitude modulation (e.g. displays) and phase modulation (e.g. spatial light modulators (SLMs) for adaptive optics and adaptive lens) have been investigated extensively. Thin-film-transistor liquid crystal displays (TFT-LCDs) have become ubiquitous in our daily lives. Its widespread applications span from TVs, monitors, tablets, smartphones, augmented reality, virtual reality, to vehicle displays. LCD shows advantages in 1) high resolution, 2) long lifetime, 3) vivid colors using quantum dots backlight, and 4) high dynamic contrast ratio …

Mode Evolution In Fiber Based Devices For Optical Communication Systems, Bin Huang

Electronic Theses and Dissertations

Space division multiplexing (SDM) is the most promising way of increasing the capacity of a single fiber. To enable the few mode fiber (FMF) or multi-mode fiber (MMF) transmission system, several major challenges have to be overcome. One is the urgent need of ideal mode multiplexer, the second is the perfect amplification for all spatial modes, another one is the modal delay spread (MDS) due to group velocity difference of spatial modes. The main subject of this dissertation is to model, fabricate and characterize the mode multiplexer for FMF transmission. First, we designed a novel resonant mode coupler (structured directional …

Thermal And Waveguide Optimization Of Broad Area Quantum Cascade Laser Performance, Matthew Suttinger

Electronic Theses and Dissertations

Quantum Cascade Lasers are a novel source of coherent infrared light, unique in their tunability over the mid-infrared and terahertz range of frequencies. Advances in bandgap engineering and semiconductor processing techniques in recent years have led to the development of highly efficient quantum cascade lasers capable of room temperature operation. Recent work has demonstrated power scaling with broad area quantum cascade lasers by increasing active region width beyond the standard ~10 ?m. Taking into account thermal effects caused by driving a device with electrical power, an experimentally fitted model is developed to predict the optical power output in both pulsed …

System For Metal Coated Fiber Fabrication, Da Zhang

Electronic Theses and Dissertations

For many specific applications, such as sensors, aerospace, chemical industry, deep-well oil-field industry, metal-coated fiber shows strong abilities to satisfy people's requirement. With in-line coating technology, we are able to coat Aluminum on the fibers. Using electromagnetic induction, we can easily heat an electrically conducting thing such as a metal with the eddy current. This process is defined as Induction heating. And we will melt the Aluminum by this induction heating during drawing the fibers on the tower. Introduce the fiber tower system. The drawing process of in-line technology is formed of the following steps: Position, Melting, Forming into fibers, …

Picosecond Yb-Doped Fiber Amplifier, Weibin Zhu

Electronic Theses and Dissertations

Due to its versatility, rare earth doped fiber amplifier (RDFA) has attracted a lot of researchers worldwide in recent years. Depends on different kinds of rare earth ion, RDFA can be categorized into neodymium doped fiber amplifier (NDFA), erbium doped fiber amplifier (EDFA), thulium doped fiber amplifier (TDFA), and so forth. Among many kinds of RDFA, the ytterbium doped fiber amplifier (YDFA) has received even more interest, especially in high power application, mainly because of its broad gain bandwidth and high conversion efficiency which are due to its relatively simple electronic structure. The purpose of this research is to study …

Photothermal Lensing In Mid-Infrared Materials, Justin Cook

Electronic Theses and Dissertations

A thorough understanding of laser-materials interactions is crucial when designing and building optical systems. An ideal test method would probe both the thermal and optical properties simultaneously for materials under large optical loads where detrimental thermal effects emerge. An interesting class of materials are those used for infrared wavelengths due to their wide spectral transmission windows and large optical nonlinearities. Since coherent sources spanning the mid-wave and long-wave infrared wavelength regions have only become widely available in the past decade, data regarding their thermal and optical responses is lacking in literature. Photothermal Lensing (PTL) technique is an attractive method for …

Filament Wavefront Evolution, Daniel Thul

Electronic Theses and Dissertations

Filamentation is a complex process that gives rise to many nonlinear interactions. However, the fundamentals of filament formation and propagation can be explained in terms of two dominant mechanisms: Kerr self-focusing and plasma defocusing. The first to occur, self-focusing, is responsible for an increase in irradiance through beam collapse. This process requires sufficient initial peak power, on the order of gigawatts for near infrared beams in air. Plasma defocusing then arrests the collapse process once the irradiance reaches the ionization threshold of the medium. These two processes balance each other in an extended plasma channel known as a filament. A …

Novel Photonic Resonance Arrangements Using Non-Hermitian Exceptional Points, Hossein Hodaei

Electronic Theses and Dissertations

In recent years, non-Hermitian degeneracies also known as exceptional points (EPs) have emerged as a new paradigm for engineering the response of optical systems. EPs can appear in a wide class of open non-Hermitian configurations. Among different types of non-conservative photonic systems, parity-time (PT) symmetric arrangements are of particular interest since they provide an excellent platform to explore the physics of exceptional points. In this work, the intriguing properties of exceptional points are utilized to address two of the long standing challenges in the field of integrated photonics- enforcing single mode lasing in intrinsically multimode cavities and enhancing the sensitivity …

Generation Of High-Flux Attosecond Pulses And Towards Attosecond-Attosecond Pump-Probe Experiments, Yang Wang

Electronic Theses and Dissertations

At present, the energy of a single isolated attosecond pulse is limited to nanojoule levels. As a result, an intense femtosecond pulse has always been used in combination with a weak attosecond pulse in time-resolved experiments. To reach the goal of conducting true attosecond pump-attosecond probe experiments, a high flux laser source has been developed that can potentially deliver microjoule level isolated attosecond pulses in the 50 eV range, and a unique experimental end station has been fabricated and implemented that can provide precision control of the attosecond-attosecond pump-probe pulses. In order to scale up the attosecond flux, a unique …

Light Soaking Phenomena In Organic-Inorganic Mixed Halide Perovskite Single Crystals, Hye Ryung Byun, Dae Young Park, Hye Min Oh, Gon Namkoong, Mun Seok Jeong

Electrical & Computer Engineering Faculty Publications

Recently, organic inorganic mixed halide perovskite (MAPbX₃; MA = CH₃NH₃^+, X = Cl^-, Br^-, or I^-) single crystals with low defect densities have been highlighted as candidate materials for high-efficiency photovoltaics and optoelectronics. Here we report the optical and structural investigations of mixed halide perovskite (MAPbBr_3-xI_x) single crystals. Mixed halide perovskite single crystals showed strong light soaking phenomena with light illumination conditions that were correlated to the trapping and detrapping events from defect sites. By systematic investigation with optical analysis, we found that the …

Quantitative Analysis And Process Of High Speed Live Cell Interferometry Measurements, Daniel Guest

Theses and Dissertations

The application of auto focus, using an optical beam deflection technique, to existing live cell interferometry measurements was developed and examined. The benefit to relevant experiments, currently being performed, is shown as well as its performance across various magnifications. Enough information is given so that the system can be reproduced to fit any end users needs.

Quantum Inspired Symmetries In Laser Engineering, Mohammad Hosain Teimourpour

Dissertations, Master's Theses and Master's Reports

In this thesis, quantum inspired symmetries including Parity-Time (PT) symmetry and Supersymmetry (SUSY) have been studied in the context of non-Hermitian engineered laser systems. This thesis starts with a short review of semiconductor lasers theory in second chapter, followed by an introduction to quantum inspired symmetries: PT symmetry and SUSY in optics and photonics in chapter three.

In chapter four, we have studied the robustness and mode selectivity in PT symmetric lasers. We investigate two important aspects of PT symmetric photonic molecule lasers, namely the robustness of their single longitudinal mode operation against instabilities triggered by spectral hole burning effects, …

N-Isopropylacrylamide-Based Photopolymer For Holographic Recording Of Thermosensitive Transmission And Reflection Grating, Tatsiana Mikulchyk, Suzanne Martin, Izabela Naydenova

Articles

In recent years, functionalized photopolymer systems capable of holographic recording are in great demand due to their potential use in the development of holographic sensors. This work presents a newly developed Nisopropylacrylamide(NIPA)-based photopolymer for holographic recording in reflection and transmission modes. The optimized composition of the material is found to reach refractive index modulation of up to 5  10-3 and 1.6  10-3 after recording in transmission and reflection mode, respectively. In addition to fulfilling the requirements for holographic recording materials, the NIPA-based photopolymer is sensitive to temperature and has lower toxicity than acrylamide-based photopolymers. Possible application of the …

Humidity And Temperature Induced Changes In The Diffraction Efficiency And The Bragg Angle Of Slanted Photopolymer-Based Holographic Gratings, Tatsiana Mikulchyk, James Walshe, Dervil Cody, Suzanne Martin, Izabela Naydenova

Articles

This work explores the humidity and temperature response of volume phase slanted gratings recorded in photopolymers with varied chemical composition. Acrylamide and diacetone acrylamide were used as monomers and triethanolamine and N-phenylglycine were used as photoinitiators. The study demonstrates that the response of photopolymer-based holographic gratings to relative humidity (RH) and temperature (T) can be tuned by alteration of the photopolymer composition.Humidity and temperature response of the holograms has been characterized by recording Bragg selectivity curves of transmission gratings and by monitoring the position of the maximum intensity in the spectral response of reflection gratings. Investigation of the humidity response …

Development And Characterisation Of A Bath-Based Vertical Blackbody Cavity Calibration Source For The Range −30 °C To 150 °C, Sam Boles, Igor Pušnik, Dubhaltach Mac Lochlainn, David Fleming, Izabela Naydenova, Suzanne Martin

Articles

Industrial use of Radiation Thermometers (RTs) is becoming increasingly common due to the perceived advantages and wide market availability. Blackbody Cavity Radiation Sources (BCRSs) are typically used for calibration of these instruments, and these cavities are oriented horizontally in most cases. For BCRSs based in thermal baths, this necessitates the use of custom-built baths with side openings. This paper presents a unique design of vertical bath-based BCRS that may be immersed in conventional calibration baths without modifications to the baths. The method, results, and analysis of an international comparison comparing this vertical BCRS, standard horizontal BCRSs, and a previous iteration …