Optics Commons^™

Interferometric Lithography- An Approach To Large Area And Cost Effective Nanopatterning, Vineeth Sasidharan

Optical Science and Engineering ETDs

In this dissertation interferometric lithography is approached in two different ways to address two important constraints of nanopatterning. One approach solves the problem of scaling up interferometric lithography to wafer scale (4 inch or larger) area. Through the second approach we have developed a nanopatterning technique based on interferometric lithography by using an inexpensive (~$100) diode laser as source, making interferometric lithography a very cost-effective technique.

Wafer-scale large-area nanopatterning was developed using an amplitude grating mask as a grating beam splitter along with spatial averaging of laser intensity by wobbling. The longitudinal and transverse coherence issues both are eased by …

Single-Molecule Localization Microscopy Of 3d Orientation And Anisotropic Wobble Using A Polarized Vortex Point Spread Function, Tianben Ding, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Within condensed matter, single fluorophores are sensitive probes of their chemical environments, but it is difficult to use their limited photon budget to image precisely their positions, 3D orientations, and rotational diffusion simultaneously. We demonstrate the polarized vortex point spread function (PSF) for measuring these parameters, including characterizing the anisotropy of a molecule’s wobble, simultaneously from a single image. Even when imaging dim emitters (∼500 photons detected), the polarized vortex PSF can obtain 12 nm localization precision, 4°–8° orientation precision, and 26° wobble precision. We use the vortex PSF to measure the emission anisotropy of fluorescent beads, the wobble dynamics …

Spatiotemporal Non-Uniformly Correlated Beams, Milo W. Hyde Iv

Faculty Publications

We present a new partially coherent source with spatiotemporal coupling. The stochastic light, which we call a spatiotemporal (ST) non-uniformly correlated (NUC) beam, combines space and time in an inhomogeneous (shift- or space-variant) correlation function. This results in a source that self-focuses at a controllable location in space-time, making these beams potentially useful in applications such as optical trapping, optical tweezing, and particle manipulation. We begin by developing the mutual coherence function for an ST NUC beam. We then examine its free-space propagation characteristics by deriving an expression for the mean intensity at any plane z ≥ 0. To validate …

Uncertainty Analysis For Ccd-Augmented Casi® Brdf Measurement System, Todd V. Small, Samuel D. Butler, Michael A. Marciniak

Faculty Publications

This work presents a measurement uncertainty analysis for a system designed to simultaneously capture specular in-plane and out-of-plane bidirectional reflectance distribution function (BRDF) data with high spatial resolution by augmenting the Complete Angle Scatter Instrument (CASI®) with a charge-coupled device (CCD) camera. Various scatter flux, incident flux, scatter angle, and detector solid angle uncertainty contributions are considered and evaluated based on imperfectly known system parameters. In particular, incident flux temporal fluctuation, detector noise and non-linearity, and out-of-plane aperture misalignment considerations each require significant adjustment from original CASI® uncertainty analysis, and expressions for neutral density (ND) filter, scatter angle, and solid …

Resampling And Super-Resolution Of Hexagonally Sampled Images Using Deep Learning, Dylan Flaute, Russell C. Hardie, Hamed Elwarfalli

Electrical and Computer Engineering Faculty Publications

Super-resolution (SR) aims to increase the resolution of imagery. Applications include security, medical imaging, and object recognition. We propose a deep learning-based SR system that takes a hexagonally sampled low-resolution image as an input and generates a rectangularly sampled SR image as an output. For training and testing, we use a realistic observation model that includes optical degradation from diffraction and sensor degradation from detector integration. Our SR approach first uses non-uniform interpolation to partially upsample the observed hexagonal imagery and convert it to a rectangular grid. We then leverage a state-of-the-art convolutional neural network (CNN) architecture designed for SR …

Method Of Making Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Hengky Chandrahalim, Jonathan W. Smith

AFIT Patents

A method of making passive microscopic Fabry-Pérot Interferometer (FPI) sensor includes forming a three-dimensional microscopic optical structure on a cleaved tip of an optical fiber that reflects a light signal back through the optical fiber. The reflected light is altered by refractive index changes in the three-dimensional structure that is subject to at least one of: (i) thermal radiation; and (ii) volatile organic compounds.

A Unified Framework Of Deep Learning-Based Facial Expression Recognition System For Diversified Applications, Sanoar Hossain, Saiyed Umer, Vijayan K. Asari, Ranjeet Kumar Rout

Electrical and Computer Engineering Faculty Publications

This work proposes a facial expression recognition system for a diversified field of appli- cations. The purpose of the proposed system is to predict the type of expressions in a human face region. The implementation of the proposed method is fragmented into three components. In the first component, from the given input image, a tree-structured part model has been applied that predicts some landmark points on the input image to detect facial regions. The detected face region was normalized to its fixed size and then down-sampled to its varying sizes such that the advantages, due to the effect of multi-resolution …

Solar Cell Brdf Measurement And Modeling With Out-Of-Plane Data, Todd V. Small, Samuel D. Butler, Michael A. Marciniak

Faculty Publications

In this work, a CCD-augmented complete angle scatter instrument (CASI) with a visible red laser source was used to measure the BRDF of a commercially available solar cell designed for small satellites, simultaneously capturing both in-plane and out-of-plane data with high angular resolution surrounding the specular direction. The measurements exhibited three distinct scatter features: a central specular peak, an offset specular peak, and a diffraction pattern. The two peaks were caused by different material surfaces with slightly different normal directions, and the diffraction pattern arose from periodically-spaced metal conducting bars running in one direction across the solar cell surface. The …

Analysis Of Space To Ground Ladar Performance With Non-Traditional Optics, Prayant P.S. Hanjra

Theses and Dissertations

Two major obstacles to space-based LADAR systems are low power returns from targets and limitations on size and weight for transporting large optics into orbit. Signals incur significant losses during roundtrip propagation through the atmosphere and from diffuse scattering off of targets. Models, such as the Laser Environmental Effects Definition and Reference (LEEDR) simulator and High Energy Laser End to End Operational Simulation (HELEEOS) can predict these losses due to the atmosphere and optical components for a variety of atmospheric and environmental conditions across the globe. A transmissometer is used to validate these models. These losses are used to determine …

Linear And Non Linear Properties Of Two-Dimensional Exciton-Polaritons, Mandeep Khatoniar

Dissertations, Theses, and Capstone Projects

Technology has been accelerating at breakneck speed since the first quantum revolution, an era that ushered transistors and lasers in the late 1940s and early 1960s. Both of these technologies relied on a matured understanding of quantum theories and since their inception has propelled innovation and development in various sectors like communications, metrology, and sensing. Optical technologies were thought to be the game changers in terms of logic and computing operations, with the elevator pitch being "computing at speed of light", a fundamental speed limit imposed by this universe’s legal system (a.k.a physics). However, it was soon realized that that …

Improved Out-Of-Plane Brdf Measurement And Modeling, Todd V. Small

Theses and Dissertations

The bi-directional reflectance distribution function (BRDF) describes the directional (spatial) nature of light’s reflectance from a material surface. When incident light of a particular wavelength strikes a material surface from a particular direction, portions of that incident light will be reflected into various directions in various amounts, depending on the material’s surface characteristics. Historically, the vast majority of BRDF measurement and modeling research has focused on reflection within the plane-of incidence (in-plane) and dealt primarily with simplified isotropic BRDFs. Remote sensing applications, such as satellite light curve analysis, typically rely on closed-form microfacet models for efficiency. There are many factors, …

Publication-Driven Research Experience For Undergraduates (Reu) Program In Optics And Photonics In The Philippines Using Circuit Analogue-Based Research Experiments, Benjamin Dingel, Clint Dominic Bennett

Physics Faculty Publications

We summarize a unique publication-driven Research Experience for Undergraduates program in optics/photonics that uses electronic circuit analogue-based research to strengthen students’ engagement in research. At present, we have published 4 journal and conference papers.

Robust Method Of Determining Microfacet Brdf Parameters In The Presence Of Noise Via Recursive Optimization, Michael W. Bishop, Samuel D. Butler, Michael A. Marciniak

Faculty Publications

Accurate bidirectional reflectance distribution function (BRDF) models are essential for computer graphics and remote sensing performance. The popular microfacet class of BRDF models is geometric-optics-based and computationally inexpensive. Fitting microfacet models to scatterometry measurements is a common yet challenging requirement that can result in a model being fit as one of several unique local minima. Final model fit accuracy is therefore largely based on the quality of the initial parameter estimate. This makes for widely varying material parameter estimates and causes inconsistent performance comparisons across microfacet models, as will be shown with synthetic data. We proposed a recursive optimization method …

Nonlinear Optical Studies Of Interfacial Ferroelectricity And Strain Distribution In Perovskite Dielectric Films, Tony Le

Dissertations, Theses, and Capstone Projects

Dielectric and ferroelectric perovskite films have been model energy storage structures for their low-dielectric loss, extremely high charge-discharge speed, and good temperature stability, yet there is still much to understand about the material’s limitations. This dissertation presents a detailed understanding of the strain-induced ferroelectricity at the boundary between a strontium titanate (SrTiO₃) ultrathin film epitaxially grown on a germanium (Ge) substrate through optical second harmonic generation (SHG), and the polydomain distribution in the Zr-doped BaTiO₃ (BZT) films by time-resolved pump-probe spectroscopy.

First, SHG measurements were performed to reveal interfacial ferroelectricity in the epitaxial SrTiO₃/Ge (100) …

Topological Classical Wave Systems With Modulations, Interactions, And Higher-Order Topological States, Mengyao Li

Dissertations, Theses, and Capstone Projects

Topological phases in classical wave systems, such as photonic and acoustic, have been actively investigated and applied for wave guiding, lasing, and numerous other novel phenomena and device applications Topological phase transitions enable robust boundary states, and the field has been broadening recently into a vast variety of systems with temporal modulations and interactions. Floquet modulation, for example, is the modulation applied periodically in time which may break symmetries and leads to novel topological phases.

Introducing non-Hermitian Floquet modulation enables more interesting phenomena including bandgap in imaginary part of the spectrum and gainy/lossy topological edge states with complex energy values. …

Wave Excitation And Dynamics In Disordered Systems, Yiming Huang

Dissertations, Theses, and Capstone Projects

This thesis presents studies of the field and energy excited in disordered systems as well as the dynamics of scattering.

Dynamic and steady state aspects of wave propagation are deeply connected in lossless open systems in which the scattering matrix is unitary. There is then an equivalence among the energy excited within the medium through all channels, the Wigner time delay, which is the sum of dwell times in all channels coupled to the medium, and the density of states. But these equivalences fall away in the presence of material loss or gain. In this paper, we use microwave measurements, …

Data-Driven Algorithm To Classify The Degree Of Isotropy In The Bidirectional Reflectance Distribution Function, Anne W. Werkley, Samuel D. Butler, Todd V. Small, Michael A. Marciniak

Faculty Publications

The bidirectional reflectance distribution function (BRDF) is used to describe reflectances of materials by calculating the ratio of the reflected radiance to the incident irradiance. While it was found that the isotropic models maintained symmetry about ϕ_s  =  π, such symmetry was not maintained about the θ_s  =  θ_i axis, except for close to the specular peak. This led to the development of a data-driven metric for how isotropic a BRDF measurement is. Research efforts centered around developing an algorithm that could determine material anisotropy without having to fit to models. This algorithm was tested using high …

Re-Visiting Acoustic Sounding To Advance The Measurement Of Optical Turbulence, Steven T. Fiorino, Santasri Bose-Pillai, Kevin J. Keefer

Faculty Publications

Optical turbulence, as determined by the widely accepted practice of profiling the temperature structure constant, C²_T, via the measurement of ambient atmospheric temperature gradients, can be found to differ quite significantly when characterizing such gradients via thermal-couple differential temperature sensors as compared to doing so with acoustic probes such as those commonly used in sonic anemometry. Similar inconsistencies are observed when comparing optical turbulence strength derived via C²_T as compared to those through direct optical or imaging measurements of small fluctuations of the index of refraction of air (i.e., scintillation). These irregularities are especially apparent …

Non-Hermitian Physics And Engineering In Whispering Gallery Mode Microresonators, Changqing Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Non-Hermitian physics describes the behaviors of open systems which have interactions with the environment. It can be applied to a wide range of classical and quantum systems. Exotic physical phenomena are unveiled in such non-Hermitian systems, especially around a singular point in the parameter space, i.e., the exceptional point (EP), where the eigenvalues and the associated eigenvectors are degenerate. A plethora of demonstrations have been found in optics and photonics, where the non-Hermitian effects are ubiquitous due to the existence of optical dissipation or amplification. In particular, whispering gallery mode (WGM) resonators are ideal candidates for studying light-matter interactions in …

Photoluminescence Spectra Of Silicon Doped With Cadmium, N A. Sultanov, E T. Rakhimov, Z Mirzajonov, F T. Yusupov

Scientific-technical journal

Cadmium and zinc, as transition metals, are deep-level impurities (DL) and have a significant effect on the electrical, photoelectric, recombination, and other properties of semiconductor crystals.This paper presents the results of experimental studies of the optical and electrical properties of silicon crystals containing impurity atoms of cadmium and zinc using DLTS and low-temperature photoluminescence (PL).