Polymer Chemistry Commons^™

Design And Synthesis Of Dynamic Covalent Polymer Scaffolds With Controlled Architectures, Emily Annette Hoff

Dissertations

The design and synthesis of functional, controlled polymer architectures is essential to the development of new materials with precise and tailorable properties or applications. The work described in this dissertation focuses on the development of controlled polymer architectures with dynamic linkages for the design of multifunctional materials and surfaces via robust, efficient, and stimuli-responsive strategies.

In Chapter III, a post-polymerization modification strategy based on ambient temperature nucleophilic chemical deblocking of polymer scaffolds bearing N-heterocycle blocked isocyanate moieties is reported. Room temperature RAFT polymerization of three azole-N-carboxamide methacrylates, including 3,5-dimethyl pyrazole, imidazole, and 1,2,4-triazole derivatives, afforded reactive polymer scaffolds …

Diazonium 4-(Trifluorovinyloxy) Perfluorobutanesulfonyl Benzenesulfonimide Zwitterionic Monomer Synthesis, Isaac D. Addo

Electronic Theses and Dissertations

3-Diazonium- 4-(trifluorovinyloxy) - perfluorobutanesulfonyl benzenesulfonimide zwitterionic monomer (see figure 1) is proposed to be polymerized and further act as a new electrolyte for Polymer exchange membrane fuel cells (PEMFCs). One reason is that, the aromatic trifluorovinyl aryl ether (TFVE) group can easily be homopolymerized to aromatic perfluorocyclobutane (PFCB) polymer. Furthermore, the diazonium moiety in the monomer is expected to covalently attach the electrolyte to the carbon electrodes support. The perfluoroalkyl(aryl) sulfonimide (PFSI) pendant provides good chemical and mechanical stability as well as better proton conductivity. Several multi-step synthetic schemes are designed to obtain such monomer from perfluoroalkyl(aryl) sulfonimide (PFSI). Among …

Direct Attachment Of 4-Hydroxybenzoic Acid Polymers And Capture Agents To Flat Sheet And Microdialysis Membranes For Improved Mass Transport, Sarah Jane Phillips

Graduate Theses and Dissertations

Microdialysis (MD) sampling is a diffusion-based separation method which has the ability to sample any analyte that can diffuse across the semi-permeable membrane. However one challenge for MD is that for soluble proteins greater than 10 kDa, the relative recovery (RR) using a 100 kDa MD probe is between 1-5%.1 There are two major barriers that lead to these low recovery values - nonspecific adsorption (NSA) and poor solute mass transport. To overcome these two barriers, the modification of PES-based MD membranes has been initiated by laccase. Previous researchers have used laccase to modify PES flat sheet and hollow fiber …

Post-Polymerization Functionalization Of Poly (Ethylene Oxide)–Poly (Β-6-Heptenolactone) Diblock Copolymers To Tune Properties And Self-Assembly, Elizabeth Gillies, Brooke M. Raycraft, Jarret Macdonald

Chemistry Publications

Polyester-based amphiphilic block copolymers and their nanoassemblies are of significant interest for a wide range of applications due to the degradability of the polyester block. However, the commonly used polyesters lack functional groups on their backbones, limiting the possibilities to chemically modify these polymers. Described here are new poly(ethylene oxide) (PEO)–poly(β-6-heptenolactone) (PHEL) block copolymers having pendant alkenes at each repeat unit on the PHEL block. First, the self-assembly of these block copolymers in aqueous solution was studied and it was found that they formed solid nanoparticles and vesicles depending on the relative block lengths. Next the alkene moieties of the …

Synthesis And Characterization Of Novel Polyurethanes And Polyimides, Kenneth Kull

USF Tampa Graduate Theses and Dissertations

Four novel high performance soft thermoplastic polyurethane elastomers utilizing methylene bis(4-cyclohexylisocyanate) as a hard segment, 1,4 butanediol as a chain extender and modified low crystallinity carbonate copolymer as a soft segment were synthesized. The samples were characterized by infrared spectroscopy (FTIR), tensile, elongation, hardness, abrasion resistance and atomic force microscopy (AFM). SAXS data shows evidence of an interdomain "center-to-center" distance of 45Å. DSC traces show evidence of one glass transition temperature and a weak melting region. DMA analysis reveals a low temperature secondary relaxation and the glass to rubber transition followed by a rubbery plateau. All samples demonstrated the ability …

Recent Approaches In Designing Bioadhesive Materials Inspired By Mussel Adhesive Protein, Pegah Kord Forooshani, Bruce P. Lee

Department of Biomedical Engineering Publications

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhe-sion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized poly- mers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface …

Effect Of Surface Treatment On Liquid Adhesion Inside 3-D Structures, Madani A. Khan, Jeffrey Alston, Andrew Guenthner, Jacob Zavala

STAR Program Research Presentations

This study explores the relationship between chemical surface treatments on the interior of glass tubes and their resistance to fluid flow. By treating the interior of the tubes with functional silanes we can decrease or increase the interaction of the tube walls with the fluid column, which translates to changes in fluid column height for a given pressure differential. Resistance to fluid flow is quantified by using the tubes as integral parts of a barometric pressure column and measuring the changes in column height as the fluid is pulled into the tube by a set pressure differential. The barometric pressure …

Characterization Of S-Swcnt/Pf-Pd Dispersions And Networks, Tamara N. El-Hayek Ms., Jeffrey Blackburn, Andrew Ferguson, Tammy Pheuphong

STAR Program Research Presentations

Single-Walled Carbon Nanotubes (SWCNTs) are being investigated for their use in a wide variety of renewable energy applications. Their unique physical properties contribute to desirable traits such as a high carrier mobility, strong optical absorption and tunable electronic band gap. Unfortunately, due to variability in certain parameters, SWCNTs are limited in their application. The major drawback is that SWCNTs are variable in size and type and typical synthetic methods are not selective. As a result, selective methods must be developed in order to sort these tubes and extract those which are desirable for a particular application. Though there are several …

Synthesis, Self-Assembly, And Immunological Activity Of Α-Galactose-Functionalized Dendron–Lipid Amphiphiles, John Trant, Namrata Jain, D. M. Mazzuca, J Trevor Mcintosh, Bo Fan, S M Mansour Haeryfar, Sebastien Lecommandoux, Elizabeth Gillies

Chemistry Publications

Nanoassemblies presenting multivalent displays of biologically active carbohydrates are of significant interest for a wide array of biomedical applications ranging from drug delivery to immunotherapy. In this study, glycodendron–lipid hybrids were developed as a new and tunable class of dendritic amphiphiles. A modular synthesis was used to prepare dendron–lipid hybrids comprising distearylglycerol and 0 through 4th generation polyester dendrons with peripheral protected amines. Following deprotection of the amines, an isothiocyanate derivative of C-linked α-galactose (α-Gal) was conjugated to the dendron peripheries, affording amphiphiles with 1 to 16 α-Gal moieties. Self-assembly in …

Photocontrolled Degradation Of Stimuli-Responsive Poly(Ethyl Glyoxylate): Differentiating Features And Traceless Ambient Depolymerization, Bo Fan, John Trant, Rebecca Yardley, Andrew Pickering, Francois Lagugne-Labarthet, Elizabeth Gillies

Chemistry Publications

The depolymerization of coatings prepared from a 6-nitroveratryl carbonate end-capped poly(ethyl glyoxylate) (PEtG) self-immolative polymer was studied. This polymer undergoes end-to-end depolymerization following cleavage of the end-cap by UV light. Several important fundamental diff erences between this class of polymers and conventional degradable polymers were revealed. For example, polymer backbone cleavage and depolymerization exhibited different dependencies on pH, emphasizing the decoupling of these processes. Probing of the coating erosion mechanism illustrated an interesting combination of features from surface erosion and bulk degradation mechanisms that arise from the end-to-end depolymerization mechanism and further differentiate these polymers from convention degradable polymers. It …

Relating Side Chain Organization Of Pnipam With Its Conformation In Aqueous Methanol, Debashish Mukherji, Manfred Wagner, Mark D. Watson, Svenja Winzen, Tiago E. E. De Oliveira, Carlos M. Marques, Kurt Kremer

Chemistry Faculty Publications

Combining nuclear magnetic resonance (NMR), dynamic light scattering (DLS), and μs long all-atom simulations with two million particles, we establish a delicate correlation between increased side chain organization of PNIPAm and its collapse in aqueous methanol mixtures. We find that the preferential binding of methanol with PNIPAm side chains, bridging distal monomers along the polymer backbone, results in increased organization. Furthermore, methanol–PNIPAm preferential binding is dominated by hydrogen bonding. Our findings reveal that the collapse of PNIPAm is dominated by enthalpic interactions and that the standard poor solvent (entropic) effects play no major role.

A Comparison Of Solvent And Water-Borne Alkyd Coatings And The History Of Voc Regulations In The United States, Molly Elise Burns

Master's Theses

A Comparison of Solvent and Water-Borne Alkyd Coatings Abstract

Conventional solvent based alkyd coatings have gone out of favor due to concerns over volatile organic compound (VOC) content. However, due to recent focus on renewable raw materials, alkyds are making a comeback in waterborne form. Water based alkyd coatings are known to have poor shelf stability and corrosion resistance, as well as other problems during the formulation process. This project focused on comparing solvent borne to two types of water-borne alkyds, water reducible alkyds and alkyds emulsions. The purpose was to understand the differences between the three types of alkyds …

Fluorescent Conjugated Polymers With A Bodipy-Based Backbone And Uses Thereof, Haiying Liu

Michigan Tech Patents

The present invention provides various fluorescent conjugated polymers with a BODIPY-based backbone. The invention also provides methods of using the polymers of the invention, such as for imaging and detection of cells, tumors, bacteria and viruses.

Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou

STAR Program Research Presentations

Metal organic frameworks are synthetic porous materials with great capacity for adsorption of carbon dioxide and methane. They chemically appear as a chain-link fence with nodes of metal connected by organic linkers. The pores between the nodes define the characteristics of the material, allowing gas particles of specific size to pass through while blocking larger particulates. While there has been success in synthesizing small amounts of metal organic frameworks, the mechanistic details behind their assembly remain unknown. Understanding the synthesis mechanism is necessary to understand the kinetics involved and be able to produce this useful material on an industrial scale. …

Correlation Of Polymer Performance And Hansen Solubility Parameters, Daniel Jobse Mania

Master's Theses

Ready-to-use (RTU) grout is becoming more important to the finish and remodeling construction industry. Market research shows it is a fast-growing product that not only is creating its own space, but is beginning to supplant existing technology.

The original intent of this research was to investigate formulation parameters and how they affect grout performance. It was learned that particle size and oil absorption (OA) value are important filler properties that affect performance as much as adequate packing density and optimal pigment volume concentration (PVC) without going beyond critical PVC (CPVC).

Polymer architecture was also determined to be extremely important, but …

Multipurpose Tenofovir Disoproxil Fumarate Electrospun Fibers For The Prevention Of Hiv-1 And Hsv-2 Infections., Kevin Tyo

Electronic Theses and Dissertations

Sexually transmitted infections affect hundreds of millions of worldwide. Both human immunodeficiency virus (HIV-1 and -2) and herpes simplex virus-2 (HSV-2) remain incurable, urging the development of new prevention strategies. While current prophylactic technologies are dependent on strict user adherence to achieve efficacy, there is a dearth of delivery vehicles that provide discreet and convenient administration, combined with prolonged-delivery of active agents. To address these needs, we created electrospun fibers (EFs) comprised of FDA-approved polymers, poly(lactic-co-glycolic acid) (PLGA) and poly(DL-lactide-co-ε-caprolactone) (PLCL), to provide sustained-release and in vitro protection against HIV-1 and HSV-2. PLGA and PLCL EFs, incorporating the antiretroviral, tenofovir …

Proximal Effects In Bimetallic Catalysts For Olefin Polymerization, In Cross Metathesis Of Poly(3-R-Cyclooctenes), And In Multiblock Polymers, Madalyn Radlauer, Theodor Agapie, Marc Hillmyer

Faculty Publications, Chemistry

Proximity and sterics play a large role in polymerization and polymer chemistry. In the development and testing of bimetallic polymerization catalysts where the two metal centers are held on the same side of the molecule by a rigid ligand framework, the proximity of the second metal changes reactivity at the first. The resulting enhancements of polar group tolerance or isoselecitivity in olefin polymerization are not observed in related bimetallic systems with distal metal centers or in monometallic analogues. In cross metathesis between poly(cyclooctene) chains, high E-stereoregularity and head-to-tail regioregularity are achieved with Grubbs second or third generation catalysts when there …

Electrospinning Of Polymeric Solutions Using Opuntia Ficus-Indica Mucilage And Iron Oxide For Nanofiber Membranes For Treating Arsenic Contaminated Water, Venkatesh Eppili

USF Tampa Graduate Theses and Dissertations

Water is the essential part of every organism and it is also a vital constituent of healthy living and diet. Unfortunately water contamination over the past decade has increased dramatically leading to various diseases. As technology advances, we are detecting many pollutants at smaller levels of concentrations. Arsenic (As) is one of those major pollutants, and Arsenic poisoning is a condition caused due to excess levels of arsenic in the body. The main basis for Arsenic poisoning is from ground water which naturally contains high concentrations of arsenic. A case study from 2007 states that over 137 million people in …

Synthesis, Properties, And Antibacterial Activity Of Polyphosphonium Semi-Interpenetrating Networks, Tyler John Cuthbert, Tristan Harrison, Paul J. Ragogna, Elizabeth Gillies

Chemistry Publications

The development of new approaches to antibacterial surfaces is of growing interest to combat the spread of harmful bacterial infections. Relative to polyammoniums, polyphosphoniums can exhibit enhanced chemical and thermal stability, but have not yet been widely explored for the preparation of antibacterial surfaces. In this work, polyphosphoniums of varying chain lengths were synthesized by reversible addition-fragmentation chain-transfer polymerization of 4-vinylbenzyl derivatives of triethyl, tributyl, and trioctylphosphonium. These polyphosphoniums were then incorporated into semi-interpenetrating networks (SIPNs) based on tetra(ethylene glycol) diacrylate (TEGDA) via a UV light-initiated curing process. Measurements of cure percentage, gel content, water contact angle, and surface charge …

Development And Characterization Of Reagent Pencils For Microfluidic Paper Based Analytical Devices, Cheyenne H. Liu

Master's Theses

Microfluidic paper based analytical devices (microPADs) are a novel platform for point of care (POC) diagnostics. Limitations of reagent shelf life have been overcome with the introduction of reagent pencils as a method for solid-based reagent deposition. While useful, little work has been reported on the characterization and optimization of reagent pencils. Herein, an investigation on reagent pencil composition and efficiency is conducted via colorimetric release profile tests utilizing an erioglaucine disodium salt that yields a quantifiable blue colored product in the presence of water. Within this work, an investigation on the molecular weight dependence, polymer chain end functionality, and …