Polymer Chemistry Commons^™

An Investigation Of Cross-Links On Crystallization And Degradation In A Novel, Photocross-Linkable Poly (Lactic Acid) System

USF Tampa Graduate Theses and Dissertations

Polymeric molecular structure consists of repeating units bonded together. Mechanicalproperties can be altered without affecting chemical makeup by altering the number of these units. Small molecules can be introduced and/or polymers can be modified to form bonds between molecular chains. Cross-linking, as this is called, also introduces mechanical variation with minimal effects on chemical composition. Lastly, polymer chains reorient themselves in response to intermolecular forces. This temperature dependent response is known as crystallization. Although chemistry is unaltered, mechanical properties can depend highly on the percent of the sample that is crystallized.

Cross-linking is known to enhance the mechanical properties of …

Design, Synthesis And Applications Of Polymer Biomaterials, Frankie Costanza

Graduate Theses and Dissertations

The emergence of antibiotic resistant bacteria has prompted the research into novel kinds of antibacterial small molecules and polymers. Nature has solved this issue with the use of cationic antimicrobial peptides, which act as nonspecific antibiotics against invading species. Herein, we have tried to mimic this general mechanism in a biocompatible and biodegradable polymer micelle based on the polymerization of naturally occurring amino acids lysine and phenylalanine linked to a PEG tether. This amphiphilic structure allows for the spontaneous collapse into stable nanoparticles in solution, which contains a hydrophilic outer layer and a hydrophobic core. Our polymers have shown activity …

Fabrication Of Tissue Precursors Induced By Shape-Changing Hydrogels, Olukemi Akintewe

Graduate Theses and Dissertations

Scaffold based tissue reconstruction inherently limits regenerative capacity due to inflammatory response and limited cell migration. In contrast, scaffold-free methods promise formation of functional tissues with both reduced adverse host reactions and enhanced integration. Cell-sheet engineering is a well-known bottom-up tissue engineering approach that allows the release of intact cell sheet from a temperature responsive polymer such as poly-N-isopropylacrylamide (pNIPAAm). pNIPAAm is an ideal template for culturing cell sheets because it undergoes a sharp volume-phase transition owing to the hydrophilic and hydrophobic interaction around its lower critical solution temperature (LCST) of 32°C, a temperature close to physiological temperature. Compared to …

Dynamical Polymer Chain Heterogeneities And Their Impacts On The Glass Transition

USF Tampa Graduate Theses and Dissertations

The utilization of polymeric materials has endured since prehistory, at first unknowinglyin the form of natural biopolymers such as wood and leather, culminating and continuing through the development of the plastics industry in the early twentieth century. Polymers, along with other materials including silicate glasses, readily exhibit the glass transition upon quenching: a continuous but rapid change from viscous (liquid) to elastic (solid) behavior. The physics surrounding the glass transition have been studied for over a century; while considerable progress has been made, there remains no universally accepted predictive theory of the glass transition. Modern development of glassy materials consists …

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Jovar Khalel Maghari, Ruel Levida, Marvin Caya, Shervin Austin Huang

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

Large Area Projection Sintering Of Semicrystalline Polymers And Part Analysis Of The Printed Specimens

USF Tampa Graduate Theses and Dissertations

As the requirements posed to products have increased in recent years. The trend towards individualized serial products steps up the need for respective manufacturing techniques to be more and more flexible. Conventional techniques of serial production, such as injection molding, are unable to fully meet the requirements of this trend. Additive manufacturing techniques generate components directly from a CAD data set while requiring no specific mold, producing minimal waste, and reaching satisfactory geometric accuracy. This is how, as opposed to conventional techniques, they comply with these increased demands to processing technology. Over the last two decades, the research community has …

Real Bullets, Plastic Guns: Evaluating The Strength Of 3-D Printed Gun Parts, Maria Mayol

Student Theses

Privately made firearms (PMFs), often referred to as “ghost guns,” are firearms manufactured or assembled by individuals rather than federally licensed manufacturers. Although the terms are frequently used interchangeably, “ghost gun” more specifically describes an unserialized firearm, whereas PMFs include a broader range of firearms produced through nontraditional manufacturing methods. PMFs may be entirely 3-D printed, assembled from partially completed firearm kits, or constructed by integrating additively manufactured components with commercially manufactured firearm parts. The increasing accessibility of additive manufacturing and widespread dissemination of computer-aided design files have raised concerns about concealment, regulation, and forensic evasion, particularly when factory-manufactured components …

Expanding Polymer Chemical Space Utilizing Fischer Carbenes, Brown Allylations, And Electrochemistry, Breana Kyker

Doctoral Dissertations

Polymers have become ubiquitous in our everyday lives, and their various properties (which arise from the functional motifs found within the material) have helped them find a number of applications. Tuning material properties can be achieved either through polymerizing unique monomers with distinct chemical (or structural) elements, or post-polymerization modifications (which require the development of new synthetic methodologies). The research reported herein aims to address both of these grand challenges in materials science. We explore how the incorporation of metal and metalloid fragments affects polymer synthesis and bulk material properties, as well as how these synthetic handles can be subsequently …

Dual-Action Hygienic Coatings: Benefits Of Hydrophobicity And Silver Ion Release And Surface Analysis, Steven Hinder, Declan Mccormack, Brendan Duffy, Patrick Mchale, Niall Stobie, John Colreavy

Articles

Coatings that demonstrate reduced attachment of crystalline precipitates and the medical device colonising Staphylococcus epidermidis were prepared by the immobilisation of silver doped perfluoropolyether–urethane siloxane thin films on glass substrates. The presence of stratified hydrophobic perfluoropolyether groups protects the coating surface from the attachment of crystalline hydrophilic species such as chlorides and phosphates, whilst silver ion release inhibited attachment of S. epidermidis and subsequent biofilm formation in vitro. The release of silver ions protects the perfluoro groups from the hydrophobic interactions of S. epidermidis cells, which can reduce the hydrophobicity of the protective coating. These coatings also exhibited significant antibacterial …

Phase Behavior And Rheology Of Latex, Thickener, Surfactant Mixtures And Liquid Crystal Based Compositions For Printing High-Efficiency Flexible Electronics, Franceska Santos

Master's Theses

This project consists of two parts. One area of focus in the first part is understanding the interactions between a non-ionic, block copolymer type dispersant and hydrophobically-modified, ethoxylated urethane (HEUR) associative thickeners in water. The dispersant was mixed at various concentrations (0-2% by weight) with HEUR thickeners at 1% by weight concentration in the aqueous medium. This study is an integral part of our attempts to determine mechanisms of viscosity drop when colorant dispersions are added to latex tint base formulations thickened with associative thickeners. One of the HEUR thickeners is a product that has been available for over three …