Software Engineering Commons^™

A System For Structured Management Of Hypermedia Resources For The World Wide Web, Kevin L. Marlowe

Computer Science Theses & Dissertations

The World Wide Web (WWW) is arguably the preferred method for disseminating information across the Internet. Most of the work to support the advancement of WWW technology has focused on servers used in storing and retrieving information, browsers for viewing this information, and editors or filters for creating the information.

One area which has received little attention is that of actually managing this information at the local host. This thesis describes the development of a means for organizing local data prior to its publishing on the WWW, a method for gathering local pages together and preparing them for distribution, and …

On The Interaction Of Object-Oriented Design Patterns And Programming Languages, Gerald Baumgartner, Konstantin Läufer, Vincent F. Russo

Computer Science: Faculty Publications and Other Works

Design patterns are distilled from many real systems to catalog common programming practice. However, some object-oriented design patterns are distorted or overly complicated because of the lack of supporting programming language constructs or mechanisms. For this paper, we have analyzed several published design patterns looking for idiomatic ways of working around constraints of the implementation language. From this analysis, we lay a groundwork of general-purpose language constructs and mechanisms that, if provided by a statically typed, object-oriented language, would better support the implementation of design patterns and, transitively, benefit the construction of many real systems. In particular, our catalog of …

Data Compression Based On The Cubic B-Spline Wavelet With Uniform Two-Scale Relation, S. K. Yang, C. H. Cooke

Mathematics & Statistics Faculty Publications

The aim of this paper is to investigate the potential artificial compression which can be achieved using an interval multiresolution analysis based on a semiorthogonal cubic B-spline wavelet. The Chui-Quak [1] spline multiresolution analysis for the finite interval has been modified [2] so as to be characterized by natural spline projection and uniform two-scale relation. Strengths and weaknesses of the semiorthogonal wavelet as regards artificial compression and data smoothing by the method of thresholding wavelet coefficients are indicated.

An Investigation Into An Effective Method Of Automatically Analysing Oracle Applications To Count Function Points, J. L. Wong

Theses : Honours

Function Point Analysis (FPA) is a synthetic software estimation metric used for computing the size and complexity of applications. It was first introduced by Allan. J. Albrecht during the mid-seventies, as a result of a lengthy research based on applications that were developed using COBOL and PL/1 programming languages. The purpose of this research· is to investigate the possibility, and the most effective method, of automatically performing a Function Point Analysis on Oracle applications that consist of Oracle Forms and Oracle Reports. The research revealed a seemingly lack of other researches on this topic. As FPA was invented a few …

Application Of Autoregressive Moving Average Linear Prediction Filters To The Characterization Of Solar Wind-Magnetosphere Coupling, Carter N. Borst

Theses and Dissertations

Linear prediction filtering techniques have been used in studying the coupling processes between the solar wind and magnetosphere. The magnetosphere is a complex, dynamic system with at least two independent coupling methods for energy input, driven and unloading. Linear models were built and tested on the Bargatze data set, consisting of over 70 days of geomagnetic indices and solar wind data ordered in 34 intervals of increasing geomagnetic activity. Linear filtering techniques employing single-and multiple-input, autoregressive models predicted values of the magnetic index AL from solar wind data. The impulse response curves of the AL-coupling function groups showed amplitude peaks …

Towards A Model For Software Project Estimating, Stuart Hope

Theses : Honours

The use and development of software is an integral and critical part of modern industrial society. The outcomes of many software development and maintenance projects have been less than satisfactory with significant numbers being over schedule, lacking in functionality and over budget. These problems are the result of poor management of both the process and the product. One of the major problems to overcome in the management of software development projects is the ability to predict the outcomes early in the project when there are a large number of unknowns. The ability to reliably predict the outcomes in a repeatable …

The Design And Implementation Of A Toolkit For The Creation Of Virtual Environments, Jesse Kinross-Smith

Theses : Honours

Virtual Reality is a field that is steadily increasing in popularity and interest. New developments in both hardware and software have empowered developers with new devices allowing faster and better quality interaction with virtual environments. However, the emphasis of research in virtual environments has been more concerned with development of new display and input devices, as opposed to the investigation of different methods of interaction that a three-dimensional environment offers. This project designs and implements a three-dimensional, interactive, virtual environment development system upon an existing three-dimensional rendering engine. The aim of the project is to allow users to generate virtual …

Objectism 3.0: A Software Architecture For The Development Of Portable Visual Simulation Applications, Shawn M. Hannan

Theses and Dissertations

A visual simulation software architecture is a reusable design for visual simulation applications. This thesis effort was the third stage in an ongoing refinement of such an architecture, named ObjectSim. The primary goals of this stage were to improve the architecture by eliminating its dependence on two platform-specific graphics libraries (named GL and Performer, from Silicon Graphics, Inc.), and to examine the potential for expanding the architecture to accommodate distributed simulations. The effort resulted in a new version of the architecture which allows the development of visual simulation applications which take full advantage of the aforementioned libraries without calling those …

Transforming Algebraically-Based Object Models Into A Canonical Form For Design Refinement, Charles G. Beem

Theses and Dissertations

The understandability of object-oriented design techniques and the rigor of formal methods have improved the state of software development; however, both ideas have limitations. Object-oriented techniques, which are semi-formal, can still result in incorrect designs, while formal methods are complex and require an extensive mathematical background. The two approaches can be coupled, however, to produce designs that are both understandable and verifiable, and to produce executable code. This research proposes an approach where object-oriented models are first represented algebraically in a formal specification language such as LARCH and then transformed into a canonical form suitable for design refinement. In the …

An Object-Oriented, Formal Methods Approach To Organizational Process Modeling, Vincent S. Hibdon

Theses and Dissertations

This document presents a methodology for developing an organizational process model which is based on the principles of object oriented design and formal software engineering methods. The methodology begins with the development of an object oriented Rumbaugh model (27). The Rumbaugh model is then formally specified in Z (Zed) schemas. Finally, the Z specifications are translated into an executable model in the Software Refinery Environment(TM). This model is described based on the AF wing domain and developed in this domain. The proposed methodology is then shown to produce a very general model which is extendable across almost any domain. The …

Calibration Of The System Evaluation And Estimation Of Resources Software Estimation Model (Seer-Sem) For The Air Force Space And Missile Systems Center (Smc), Kolin D. Rathmann

Theses and Dissertations

This study examined whether calibration of the SEER-SEM impacted the effort estimates generated by the model for software developments- A historical database was provided by the Space and Missile System's Center Los Angeles, and used as the model's input data. The data was stratified into four usable platforms, military ground command and-control, military ground signal processing, military specification avionics, and military mobile. Each platform's data sets were split, the majority of points for calibration of the model, and the rest for model validation. The accuracy of SEER to this particular data set is limited, yet the model did respond to …

Calibration Of The Software Architecture Sizing And Estimation Tool (Saset), Carl D. Vegas

Theses and Dissertations

This study attempted to analyze the effect of calibration on the performance of the SASET computer software cost estimating model. Data used for input into the model were drawn from the most current USAF SMC Software Database (SWDB). Once all the records to be used for analysis were identified, the DBMS-Calibration tool (which is part of SASET) was used to perform regression analysis on the relationship between program size (measured in SLOC) and the effort required to develop the program (measured in man-months). Productivity information reported from this tool was then input into equations used to calculate the Productivity Calibration …

The Rotations Of Maxillary Molars, Mandibular Molars, And Maxillary First Premolars In Acceptable Occlusions, G. Kristian Hansen

Loma Linda University Electronic Theses, Dissertations & Projects

The rotation of the maxillary molars is considered important in the orthodontic treatment of malocclusions. In this study a computer analysis program was developed to examine the rotations of maxillary molars, mandibular molars, and maxillary first premolars in casts of permanent dentitions with acceptable occlusions. Ninety three sets of untreated "acceptable occlusion" models from the collection of the Foundation for Orthodontic Research (FOR) were scanned on a flat bed scanner at 600 dots per inch (dpi). The images were analyzed using custom software on a computer. Measurements were made by relating maxillary first permanent molars to the midline, the archform, …

Formal Foundations For The Specification Of Software Architecture, Mark J. Gerken

Theses and Dissertations

This investigation establishes a formal foundation for software architecture that allows for the specification of large, non-trivial software systems using well founded, consistency preserving construction techniques. Two fundamental problems were addressed: how to define and express architectures formally using the concept of theories, and how architecture theories can be practically applied in specification construction. The initial stages of this investigation sought to establish a formal, mathematical relationship between functional specifications of behavior and specifications defining system structure. Experimental results lead to the conclusion that architectures defining the structure of functional operations can be defined using functional logic, but more complex …

Object Interactions As First Class Objects: From Design To Implementation, Mahesh Dodani, Benjamin Kok Siew Gan, Lizette Velazquez

Research Collection School Of Computing and Information Systems

Collaborations between objects make up the dynamic behavior of OO software. These collaborations among objects require careful design and implementation. Treating the interactions as responsibilities that are integrated in the participating objects, results in tight coupling between objects. Tight coupling increases complexity and reduces reusability. Object interactions need to be first class objects from design to implementation. Our research provides a unified approach to model and implement these interactions as first class objects. During analysis and design, they are modeled using DynaSpecs. During implementation, they are coded with a new language construct called Compositions. DynaSpecs and Compositions provide a consistent …

Exploiting High Performance Fortran For Computational Fluid Dynamics, Volume 919, Ken Hawick, Geoffrey C. Fox

Northeast Parallel Architecture Center

We discuss the High Performance Fortran data parallel programming language as an aid to software engineering and as a tool for exploiting High Performance Computing systems for computational uid dynamics applications. We discuss the use of intrinsic functions, data distribution directives and explicitly parallel constructs to optimize performance by minimizing communications requirements in a portable manner. In particular we use an implicit method such as the ADI algorithm to illustrate the major issues. We focus on regular mesh problems, since these can be efficiently represented by the existing HPF definition, but also discuss issues arising from the use of irregular …

A Proposal For A Development Platform For Microcontroller-Based Devices, Michael L. Wetton

Theses: Doctorates and Masters

This thesis is concerned with designing, implementing and testing a miniaturised temperature data logging device. Investigations demonstrated that a microcontroller could provide a low-cost single-chip solution to this problem and after a detailed review of 8-bit microcontrollers, the MC68HCll was chosen for this task. This document also includes discussion on an environment that was developed for creating and testing MC68HC11 software and the use of Motorola's evaluation boards. To ensure that the device was designed to software engineering standards an investigation into software engineering analysis techniques took place. This resulted in the Jackson Structured Programming (JSP) methodology being adapted to …

Critical Success Factors For Organizational Case Success, Chad Strauss

Presidential Scholars Theses (1990 – 2006)

Practitioners and researchers have suggested that Computer Aided Software Engineering (CASE) technology can significantly improve the productivity of systems analysts and the quality of systems development. Before CASE can succeed, however, specific components must exist. This paper explores CASE and the components necessary for its widespread acceptance and use within information systems departments. Specifically, this paper will examine the systems development life cycle (SDLC), the possible benefits of CASE, the current state of CASE, critical success factors for CASE, and finally CASE use.

Software Reliability Issues: An Experimental Approach, Mary Ann Hoppa

Computer Science Theses & Dissertations

In this thesis, we present methodologies involving a data structure called the debugging graph whereby the predictive performance of software reliability models can be analyzed and improved under laboratory conditions. This procedure substitutes the averages of large sample sets for the single point samples normally used as inputs to these models and thus supports scrutiny of their performances with less random input data.

Initially, we describe the construction of an extensive database of empirical reliability data which we derived by testing each partially debugged version of subject software represented by complete or partial debugging graphs. We demonstrate how these data …

Analysis And Extension Of Model-Based Software Executives, Keith E. Lewis

Theses and Dissertations

This research developed a comprehensive description of the simulation environment of Architect, a domain-oriented application composition system being developed at the Air Force Institute of Technology to explore new software engineering technologies. The description combines information from several previous research efforts and Architect's source code into a single, comprehensive document. A critical evaluation of the simulation environment was also performed, identifying improvements and modifications that enhance Architecture's application execution capabilities by reducing complexity and execution time. The analysis was then taken one step further and presented extensions to the current simulation environment. The extensions included investigating the feasibility of mixed-mode …

Easy-Sim: A Visual Simulation System Software Architecture With An Ada 9x Application Framework, Jordan R. Kayloe

Theses and Dissertations

Software architectures increase productivity when used as the basis for developing applications in a problem domain. This thesis describes the creation of Easy-Sim, an object-oriented software architecture for visual simulation systems, and its corresponding implementation as an application framework in Ada 9X. The research built upon ObjectSim, an existing object-oriented simulation architecture implemented as a application framework. Both ObjectSim and Easy-Sim operate on Silicon Graphics platforms and use the IRIS Performer graphics programming library. Easy-Sim is implemented using version 1.83 of the GNAT compiler. The investigation for this thesis involved honing ObjectSim's design, implementing the improved result in both C++ …

The Re-Engineering Of The Air Force Institute Of Technology Student Information System, Douglas J. Wu

Theses and Dissertations

This research describes the design and implementation issues associated with re-engineering the Air Force Institute of Technology Student Information System (AFITSIS). Currently, AFITSIS executes on aging relational database technology and has unfriendly user interface mechanisms. The two research objectives met were to research current AFITSIS requirements, design, and implementation, and use object-oriented methods to design an alternative implementation based on proposed object database management system standards. This research explores how AFITSIS performance and capabilities might be enhanced by taking advantage of new object-oriented software engineering techniques. One of the primary benefits of this research is a detailed object modeling technique …

Multiple Model Adaptive Estimation And Head Motion Tracking In A Virtual Environment: An Engineering Approach, James E. Russell

Theses and Dissertations

Software engineering tools and techniques were applied to design and implement an application that reduces lag typically present in virtual environment displays. The application was a Multiple Model Adaptive Estimator (MMAE), composed of three Kalman filters, that predicted head orientation one sample period into the future. The environment rendering software used these predictions to generate the environment display. Each of the filters in the MMAE was designed for a different assumed head motion type (benign, moderate, or heavy), which allowed the MMAE to adapt to changes in head movement characteristics. The use of Ada 9X as an implementation language for …

A Comparison Of Error Categorization Schemes For Use In Software System Safety Programs, Richard Escobedo, Jim Thomas

Theses and Dissertations

Software safety is becoming increasingly important in the development of DoD advanced weapon systems. To make software safer, hazard conditions must be avoided along with the errors that accompany them. The first step in identifying errors is classifying error data. The area of software error classification is not as advanced as other software development areas. The technical literature lacks examples of comprehensive taxonomies that can be applied to various computer software domains and applications. The predominant approach is to organize errors into categories particular to the program currently in work. The typical error scheme is made of narrow categories that …

A Correlational Study Of The Sei's Capability Maturity Model And Software Development Performance In Dod Contracts, Robert M. Flowe, James B. Thordahl

Theses and Dissertations

The Software Engineering Institute's (SEl's) Capability Maturity Model (CMM) is to measure an organization's software development process maturity. The Department of Defense (DoD) has model with the belief that a more mature software development process will result in a more successful software subject. Although there is a growing body of anecdotal evidence supporting this presumed correlation, there is empirical evidence. Thus, the goal of our research was to determine the nature of the correlation, if any, :ware process maturity and software project success, where process maturity is based on a CMM rating and success based on the parameters of cost …

Knowledge-Based Safety Training System (Kbsts): A Prototype Implementation, Venky Shankararaman, B. S. Lee

Research Collection School Of Computing and Information Systems

A computer-based safety training system for process operators must be able to make effective presentation of textual material, test the trainee's understanding through quizzes and facilitate plant simulation. The general framework of such a system is presented in an earlier paper (Computers in Industry, Vol. 17, 1991, pp. 349–358). In this paper, we discuss the development and implementation of a prototype Knowledge-Based Safety Training System based on the framework. The design philosophy, system architecture and the plant modelling methodology are described.

Icdm: Integrated Cooperative Decision Making - In Practice, Leonard Myers, Jens G. Pohl

Collaborative Agent Design (CAD) Research Center

Multi-agent systems provide an attractive architecture for the implementation of complex systems. Much of the research is focussed on complete automation of the decision making process as a means of duplicating human abilities for working with new problems and environments. There as also a need for systems that employ the human as an agent and rely on human abilities for common sense and deep thought. The CAD Research Center at Cal Poly and CDM Technologies have significant experience in building systems of the latter type that assist human users in solving complex problems in planning, design and economics. This experience …

Design Of An Application Development Toolkit For Hpf/Fortran 90d, Manish Parashar, Salim Hariri, Tomasz Haupt, Geoffrey C. Fox

Northeast Parallel Architecture Center

The development of efficient application software capable of exploiting available High Performance Computing (HPC) systems is non-trivial and is largely governed by the availability of sufficiently high-level languages, tools, and application development environments. In this paper we describe the design and operation of a toolkit for HPF/Fortran 90D application development. The toolkit incorporates the following systems: (1) ESP: An Interpretive Framework for HPF/Fortran 90D Performance Prediction; (2) ESP-i: A HPF/Fortran 90D Functional Interpreter; and (3) ESPial: An Integrated Environment for HPF/Fortran 90D Application Development & Execution. The toolkit has been implemented on the iPSC/860 hypercube system, and is supported by …

A Study Of Software Development For High Performance Computing, Manish Parashar, Salim Hariri, Tomasz Haupt, Geoffrey C. Fox

Northeast Parallel Architecture Center

Software development in a High Performance Computing (HPC) environment is non-trivial and requires a thorough understanding of the application and the architecture. The objective of this paper is to study the software development process in a high performance computing environment and to outline the stages typically encountered in this process. Support required at each stage is also highlighted. The modeling of stock option pricing is used as a running example in the study.

Software Metrics For Monitoring Software Engineering Projects, Edwin C. Lim

Theses: Doctorates and Masters

As part of the undergraduate course offered by Edith Cowan University, the Department of Computer Science has (as part of a year's study) a software engineering group project. The structure of this project was divided into two units, Software Engineering l and Software Engineering 2. ln Software Engineering 1, students were given the group project where they had to complete and submit the Functional Requirement and Detail System Design documentation. In Software Engineering 2, students commenced with the implementation of the software, testing and documentation. The software was then submitted for assessment and presented to the client. To aid the …