Artificial Intelligence and Robotics Commons^™

Interview: Brenda Laurel, Jason Challas

SWITCH

This interview with Brenda Laurel, Virtual Reality (VR) author and thinker, discusses the applications and challenges of VR. Creating an emphatic experience using VR technology is possible, but the challenge lies in designing an environment that models the senses to stimulate emotions. VR enables experiences of different genders, but physiological differences between the sexes exist and are important to understand. However, technology used to create the environment and simulation of physical objects in VR is only in the developmental stage. Laurel believes in the importance of keeping the mind grounded in the physical body, in order to strengthen the appreciation …

Teaching Accommodation Task Skills: From Human Demonstration To Robot Control Via Artificial Neural Networks, Paul V. Whalen

Theses and Dissertations

A simple edge-mating task, performed automatically by accommodation control, was used to study the feasibility of using data collected during a human demonstration to train an artificial neural network (ANN) to control a common robot manipulator to complete similar tasks. The 2-dimensional (planar) edge-mating task which aligns a peg normal to a fiat table served as the basis for the investigation. A simple multi-layered perceptron (MLP) ANN with a single hidden layer and linear output nodes was trained using the back-propagation algorithm with momentum. The inputs to the ANN were the planar components of the contact force between the peg …

Comparing Traditional Statistical Models With Neural Network Models: The Case Of The Relation Of Human Performance Factors To The Outcomes Of Military Combat, William Oliver Hedgepeth

Engineering Management & Systems Engineering Theses & Dissertations

Statistics and neural networks are analytical methods used to learn about observed experience. Both the statistician and neural network researcher develop and analyze data sets, draw relevant conclusions, and validate the conclusions. They also share in the challenge of creating accurate predictions of future events with noisy data.

Both analytical methods are investigated. This is accomplished by examining the veridicality of both with real system data. The real system used in this project is a database of 400 years of historical military combat. The relationships among the variables represented in this database are recognized as being hypercomplex and nonlinear.

The …

Autonomous Robot Navigation In Unknown Terrains Using Parallel Numerical Artificial Potential Fields, John C. Schneider

Computer Science Theses & Dissertations

We present a new artificial potential field formulation for resolution complete robot navigation that unifies the purely geometric path planning problem with the lower level force control problem. Our formulation is designed for numerical computation over a massively parallel mesh of processors and is responsive to newly discovered terrain features. It does not suffer from many of the problems commonly associated with potential fields and with adequate resolution provides provably correct, collision free convergence to the goal. In addition, our formulation supports many desirable, practical features required for implementation, such as bounded actuator torques, attainable incremental constructability, realizable computation and …

Survey And Implementation Of Commercial Manual Controllers For A Generic Telerobotics Architecture, Thomas E. Deeter

Theses and Dissertations

The purpose of this study is to determine an input device for the Air Force's generic telerobotics architecture for large aircraft maintenance and repair. One area of concern is the human to machine interface, more specifically, which manual controller should be used for the specified tasks in this architecture. We mailed a survey to 68 companies in order to compile a list of possible input devices that the telerobotics architecture could use. 32 companies responded which gave me enough data to generate a list that described the physical traits of the input devices. We then divided the required tasks into …

Artificially Intelligent Air Combat Simulation Agents, Daniel E. Gisselquist

Theses and Dissertations

The Advanced Research Projects Agency (ARPA), in an effort to improve military simulations, has proposed a standard for Distributed Interactive Simulation (DIS). This network protocol will allow dissimilar applications to communicate simulation information. In the field of air combat, this will allow pilots in remote simulators to fly in a common simulation. The success of this standard is dependent on applications being able to work within that standard, as well as a large variety of Computer Generated Forces (CGFs) to complement interactive forces. CGFs are needed to help simulate the large combat scenarios that can only occur in wartime. By …

A Model Of Visual Recognition Implemented Using Neural Networks, Vincent C. Phillips

Theses: Doctorates and Masters

The ability to recognise and classify objects in the environment is an important property of biological vision. It is highly desirable that artificial vision systems also have this ability. This thesis documents research into the use of artificial neural networks to implement a prototype model of visual object recognition. The prototype model, describing a computtional architecture, is derived from relevant physiological and psychological data, and attempts to resolve the use of structural decomposition and invariant feature detection. To validate the research a partial implementation of the model has been constructed using multiple neural networks. A linear feed-forward network performs pre-procesing …

Using Discovery-Based Learning To Prove The Behavior Of An Autonomous Agent, David N. Mezera

Theses and Dissertations

Computer-generated autonomous agents in simulation often behave predictably and unrealistically. These characteristics make them easy to spot and exploit by human participants in the simulation, when we would prefer the behavior of the agent to be indistinguishable from human behavior. An improvement in behavior might be possible by enlarging the library of responses, giving the agent a richer assortment of tactics to employ during a combat scenario. Machine learning offers an exciting alternative to constructing additional responses by hand by instead allowing the system to improve its own performance with experience. This thesis presents NOSTRUM, a discovery-based learning DBL system …

Design And Construction Of The Aerobot Robotic Manipulator (Arm), William L. Cochran

Theses and Dissertations

This thesis designed, constructed, and tested a robotic arm for the Aerobot Aerial Robot. The main purpose of the ARM is to enable the Aerobot to retrieve objects for use in an annual robotics competition. Design of the ARM involved synthesizing the characteristics of simplicity, weight, strength, and size. The result was a three-degree-of-freedom manipulator that uses electric motors, cable linkages, and telescoping tubes to access a work space below the Aerobot. Forward and inverse kinematics were investigated to enable automation of the ARM. Data was collected from infrared sensors to validate the model. Manipulation of the ARM is presently …

Discovery Learning In Autonomous Agents Using Genetic Algorithms, Edward O. Gordon

Theses and Dissertations

As the new Distributed Interactive Simulation (DIS) draft standard evolves into a useful document and distributed simulations begin to emerge that implement parts of the standard, there is renewed interest in available methods to effectively control autonomous aircraft agents in such a simulated environment. This investigation examines the use of a genetics-based classifier system for agent control. These are robust learning systems that use the adaptive search mechanisms of genetic algorithms to guide the learning system in forming new concepts (decision rules) about its environment. By allowing the rule base to evolve, it adapts agent behavior to environmental changes. Addressed …

A Study Of Automated Estimating Of Software Cost, Steven Shouli Wang

Masters Theses

The objectives of this thesis are to survey software cost estimation methods and to discuss how the methods can be applied as conceptual knowledge in a software cost estimation expert database system. The various applications of expert database systems are discussed. Consequently, a new method to approach the software cost estimation has been proposed.

This proposed method is based upon a dozen years of analyzing software cost models which have been done by some dedicated scientists in universities, research organizations, and industry. A CASE tool called IASCE has been designed to assist the project manager to estimate a proposed project …

Real Time Texture Analysis From The Parallel Computation Of Fractal Dimension, Halford I. Hayes Jr.

Computer Science Theses & Dissertations

The discrimination of texture features in an image has many important applications: from detection of man-made objects from a surrounding natural background to identification of cancerous from healthy tissue in X-ray imagery. The fractal structure in an image has been used with success to identify these features but requires unacceptable processing time if executed sequentially.

The paradigm of data parallelism is presented as the best method for applying massively parallel processing to the computation of fractal dimension of an image. With this methodology, and sufficient numbers of processors, this computation can reach real time speeds necessary for many applications. A …

Recognition Of Quadric Surfaces From Range Data: An Analytical Approach, Ivan X. D. D'Cunha

Electrical & Computer Engineering Theses & Dissertations

In this dissertation, a new technique based on analytic geometry for the recognition and description of three-dimensional quadric surfaces from range images is presented. Beginning with the explicit representation of quadrics, a set of ten coefficients are determined for various three-dimensional surfaces. For each quadric surface, a unique set of two-dimensional curves which serve as a feature set is obtained from the various angles at which the object is intersected with a plane. Based on a discriminant method, each of the curves is classified as a parabola, circle, ellipse, hyperbola, or a line. Each quadric surface is shown to be …

Matching Points To Lines: Sonar-Based Localization For The Psubot, Kevin Blythe Stanton

Dissertations and Theses

The PSUBOT (pronounced pea-es-you-bought) is an autonomous wheelchair robot for persons with certain disabilities. Its use of voice recognition and autonomous navigation enable it to carry out high level commands with little or no user assistance. We first describe the goals, constraints, and capabilities of the overall system including path planning and obstacle avoidance. We then focus on localization-the ability of the robot to locate itself in space. Odometry, a compass, and an algorithm which matches points to lines are each employed to accomplish this task. The matching algorithm (which matches "points" to "lines") is the main contribution to this …

Graphical Evolution Experiments In Artificial Life, Gary R. Greenfield

Department of Math & Statistics Technical Report Series

Larry Yaeger's alife simulation running on a Silicon Graphics Iris Workstation is called Poly World. Our description of PolyWorld is based on notes taken during an oral presentation and video demonstration given in the Artificial Life Panel Session of SIGGRAPH '92: In PolyWorld the visual organisms roam on a bounded two dimensional grid. The organisms "brains" are small neural nets enabling the organisms to control their external visual appearance and to perceive the external world by processing pixmaps. The simulation controls for total energy while striving to explore competition and self-organization. Genes present are for size, strength, maximum speed, mutation …

Power Analysis In Flexible Automation, Nathan A. Titus

Theses and Dissertations

The performance of an automation or robotic device can be measured in terms of its power efficiency. Screw theory is used to mathematically define the task instantaneously with two screws. The task wrench defines the effect of the device on its environment, and the task twist describes the motion of the device. The tasks can be separated into three task types: kinetic, manipulative, and reactive. Efficiency metrics are developed for each task type. The output power is strictly a function of the task screws, while device input power is shown to be a function of the task, the device Jacobian, …

Reasoning By Analogy In A Multi-Level System Architecture For The Design Of Mechanisms, Ghassan F. Issa

Computer Science Theses & Dissertations

Since the first attempts to integrate AI technology and engineering design nearly two decades ago, few expert systems have been shown to demonstrate sufficient reasoning capabilities to solve real-world design problems. The complex nature of design, the lack of understanding of the design process, and the limitations of current expert system technology have all been shown to have adverse effects on the maturity of this research area. Therefore, our direction in this research concentrates on understanding the design process, investigating a novel area of research focusing on creative design, and incorporating the results into a system model feasible for production …

Formant Estimation From Dctc's Using A Feedforward Neural Network, Shubhangi U. Kelkar

Electrical & Computer Engineering Theses & Dissertations

Formants are the natural frequencies of the human vocal tract. Existing methods for estimating formants from speech signals are computationally complex and subject to errors for certain type of speech sounds. This thesis describes a method for estimating vowel formant frequencies from Discrete Cosine Transform Coefficients (DCTC's), a form of cepstral coefficients, using a feedforward neural network with back-propagation training. Experimental results are based on a large multispeaker data base. The results are obtained for both a linear transformation and a feedforward neural network with a nonlinear hidden layer. In general, the neural network transformation is superior to the linear …

Monitoring Computer Systems: An Intelligent Approach, Myron Zhihong Xu

Computer Science Theses & Dissertations

Monitoring modern computer systems is increasingly difficult due to their peculiar characteristics. To cope with this situation, the dissertation develops an approach to intelligent monitoring. The resulting model consists of three major designs: representing targets, controlling data collection, and autonomously refining monitoring performance. The model explores a more declarative object-oriented model by introducing virtual objects to dynamically compose abstract representations, while it treats conventional hard-wired hierarchies and predefined object classes as primitive structures. Taking the representational framework as a reasoning bed, the design for controlling mechanisms adopts default reasoning backed up with ordered constraints, so that the amount of data …

Hardware-Verification Through Logic Extraction, Michael A. Dukes

Theses and Dissertations

A Prolog-based system is described which employs logic-extraction to perform hardware-verification. The extraction rules are built automatically from hierarchical structural VHDL models, enabling the equivalence of a structural VHDL description and a layout specification to be verified. Pin-to-pin critical- path analysis is performed within the logic-extraction process; many noncritical paths are pruned early, making pin-to-pin critical path analysis of large circuits feasible. It is demonstrated that a design methodology based on logic extraction, VHDL, and a layout tool can provide a fabricated functionally- correct IC design without circuit-level or switch-level simulation. This methodology is shown to be practical for VLSI …

Some Developments In Information Technology In The Irish Hotel And Catering Industry, Sean Connell, Elaine Sunderland, Ciaran Mcdonnell

Conference papers

This paper describes the current and potential future use of computers in the Hospitality Industry in Ireland. It briefly outlines two research projects which are being carried out in the Dublin College of Catering in the application of computers to the Industry.

Robotic Tactile Sensors Fabricated From A Monolithic Silicon Integrated Circuit And A Piezoelectric Polyvinylidene Fluoride Thin Film, Craig S. Dyson

Theses and Dissertations

The purpose of this research effort was to design, fabricate, and test a tactile sensor system consisting of an external high impedance switch circuit, an external multiplexing circuit, and a tactile sensor IC. In order to accomplish this objective, a hardware design and selection process was implemented along with a logical test methodology. An external multiplexer circuit samples all of the array elements in 50 ms. The current prototype sensor has linearity spanning loads of 0.8 g to 135 g, a load resolution of 20 g, and a maximum bandwidth of 25 Hz. Using an elementary shape recognition algorithm the …

Heuristics For Hospital Inventory Management, Thomas G. Hibson

Theses and Dissertations

This study investigated the reasoning strategies used by hospital logistics management experts and was conducted at the Wright-Patterson AFB (WPAFB) Medical Center. An expert system was developed to verify the captured strategies. The particular area of interest of this study was the reasoning strategies involved in the reconciliation of the Monthly Stock Status Report within the Medical Logistics Branch. A literature review revealed there were few guidelines as to when and what action to pursue when reconciling the Monthly Stock Status Report. Though there were no references in the literature on expert systems that dealt with this particular report, there …

Representation Requirements For Supporting Decision-Model Formulation, Tze-Yun Leong

Research Collection School Of Computing and Information Systems

This paper outlines a methodology for analyzing the representational support for knowledge-based decision-modeling in a broad domain. A relevant set of inference patterns and knowledge types are identified. By comparing the analysis results to existing representations, some insights are gained into a design approach for integrating categorical and uncertain knowledge in a context sensitive manner.

Effectiveness Analysis Of Knowledge Bases, Shensheng Zhao

Computer Science Theses & Dissertations

Knowledge base systems (expert systems) are entering a critical stage as interest spreads from university research to practical applications. If knowledge base systems are to withstand this transition, special attention must be paid to checking their effectiveness. The issue of effectiveness analysis of knowledge base systems has been largely ignored and few works have been published in this field. This dissertation shows how the effectiveness of a knowledge base system can be defined, discussed and analyzed at the knowledge base system level and the knowledge base level. We characterize the effectiveness of a knowledge base system in terms of minimality, …

Kinematic Synthesis Of Deployable-Foldable Truss Structures Using Graph Theory, Dirk B. Warnaar

Mechanical & Aerospace Engineering Theses & Dissertations

A graph theoretic approach is applied to the conceptual design of deployable truss structures. The characteristics that relate to the inter-connectivity of the elements of a deployable truss structure can be captured in a schematic representation, called a graph. A procedure is presented that enables the exhaustive generation of these graphs for structures of any given number of nodes and links and which are foldable onto a plane or onto a line.

A special type of truss structures, called truss modules, is presented. Graphs of this class of structures form a subset of the graphs of truss structures. Two procedures …

Implementing A Neural Network In The Smalltalk Graphical Environment, John M. Damgaard

Presidential Scholars Theses (1990 – 2006)

Interest in artificial neural networks has grown rapidly over the past few years. The technology is intriguing and the potential applications of the technology are exciting and diverse. Another area of growing interest in the computer science field is that of object-oriented programming. The object-oriented paradigm is a very powerful tool which can improve software quality and streamline the development process. The most common object-oriented language is Smalltalk. I feel that Smalltalk is an excellent platform on which to implement artificial neural networks.

An Examination And Analysis Of The Boltzmann Machine, Its Mean Field Theory Approximation, And Learning Algorithm, Vincent Clive Phillips

Theses : Honours

It is currently believed that artificial neural network models may form the basis for inte1ligent computational devices. The Boltzmann Machine belongs to the class of recursive artificial neural networks and uses a supervised learning algorithm to learn the mapping between input vectors and desired outputs. This study examines the parameters that influence the performance of the Boltzmann Machine learning algorithm. Improving the performance of the algorithm through the use of a naïve mean field theory approximation is also examined. The study was initiated to examine the hypothesis that the Boltzmann Machine learning algorithm, when used with the mean field approximation, …

Integration Of Abductive And Deductive Inference Diagnosis Model And Its Application In Intelligent Tutoring System, Jingying Zhang

Computer Science Theses & Dissertations

This dissertation presents a diagnosis model, Integration of Abductive and Deductive Inference diagnosis model (IADI), in the light of the cognitive processes of human diagnosticians. In contrast with other diagnosis models, that are based on enumerating, tracking and classifying approaches, the IADI diagnosis model relies on different inferences to solve the diagnosis problems. Studies on a human diagnosticians' process show that a diagnosis process actually is a hypothesizing process followed by a verification process. The IADI diagnosis model integrates abduction and deduction to simulate these processes. The abductive inference captures the plausible features of this hypothesizing process while the deductive …

Three Degrees Of Freedom Compliant Motion Control For Robotic Aircraft Refueling, Clayton M. Andersen

Theses and Dissertations

The Air Force Institute of Technology (AFIT) supports on-going research in application of robotic technology to enhance assembly tasks. As a testbed, AFIT supports the ground-based aerial refueling project, with an emphasis on visual servoing techniques and compliant motion control. This thesis focuses on compliant motion control. Previous research developed the testing environment, which includes a PUMA-560 industrial manipulator, and a half scale mock-up of an aerial refueling system. This effort corrected and expanded the existing two degree of freedom (DOF) compliant controller to three DOF. Three DOF compliance was demonstrated by inserting the refueling nozzle into the receiver port. …