Open Access. Powered by Scholars. Published by Universities.®

Materials Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2671 - 2700 of 3585

Full-Text Articles in Materials Chemistry

Composite Electroplating And Characterizations Of Sn-Sba15 Anode For Lithium-Ion Batteries, Xiao-Yong Fan, Jin-Mei Xu, Quan-Chao Zhuang, Hong-Hong Jiang, Ling Huang, Yan-Xia Jiang, Quan-Feng Dong, Shi-Gang Sun Feb 2007

Composite Electroplating And Characterizations Of Sn-Sba15 Anode For Lithium-Ion Batteries, Xiao-Yong Fan, Jin-Mei Xu, Quan-Chao Zhuang, Hong-Hong Jiang, Ling Huang, Yan-Xia Jiang, Quan-Feng Dong, Shi-Gang Sun

Journal of Electrochemistry

Sn-SBA15 anode was prepared by composite electroplating. The first discharge and charge capacity was 1075mAh/g and 630mAh/g respectively. After fifty charge/discharge cycles, the charge and discharge capacity of Sn-SBA15 were retained above 400mAh/g. XRD patterns indicated that the Sn-SBA15 has tetragonal crystal type. SEM images showed that the Sn-SBA15 had a honeycombed surface. EIS results indicated that there was SEI film formed on the surface of Sn-SBA15 electrode.

Go to article

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang Feb 2007

Comparison Of The Electrochemical Reactivity Of Electrodes Modified By Carbon Nanotubes With Different Sizes, Guo-Feng Yang, Neng-Qin Jia, Zhi-Yong Wang

Journal of Electrochemistry

The electrochemical activity of multi-walled carbon nanotubes(MWNTs) with different sizes,including four different MWNTs with the same length and different diameter,two different MWNTs with the same diameter and different length has been assessed and compared.The various MWNTs modified electrodes were prepared by immobilizing the suitable amount of MWNTs onto a glassy carbon electrode,and their voltammetric responses to ferricyanide,uric acid and dopamine were examined.The corresponding cyclic voltammetric data was showed that the electrochemical and electrocatalytic activities are depended on the nanotube length.The electrochemical reactivity of short MWNT(S-MWNT) is better than that of long MWNT(L-MWNT),which may be mainly attributed to the existence of …

Go to article

Mwnts Modified Gc Electrode For Hydrogen Peroxide Determination, Hong-Juan Wang, Chun-Mei Zhou, Hao Yu, Feng Peng, Jin-Kun Fang Feb 2007

Mwnts Modified Gc Electrode For Hydrogen Peroxide Determination, Hong-Juan Wang, Chun-Mei Zhou, Hao Yu, Feng Peng, Jin-Kun Fang

Journal of Electrochemistry

A MWNTs modified GC electrode was constructed successfully to be used to detect hydrogen peroxide.Two methods of maximum anodic current of cyclic voltommogram and chronoamperometry were adopted to measure the concentration of hydrogen peroxide.The results show that the MWCNTs can enlarge the effective surface area of GC electrode and can enormously enhance the electron transfer.The sensitivity and correlation coefficient for hydrogen peroxide detection are 2.84 μA/mmol·L-1,0.997 and 1.5 μA/mmol·L-1,0.971 for cyclic voltammetry and chronoamperometry,respectively.The procedure of the two methods to detect hydrogen peroxide is simple,and the results obtained are satisfied.

Go to article

Influence Of Electrolyte On The Preparation And Electrocatalytic Properties Of Pt/Gc Electrodes, Sheng-Pei Chen, Yan-Xin Chen, Tao Huang, Xiao-Wen Hou, Shi-Gang Sun Feb 2007

Influence Of Electrolyte On The Preparation And Electrocatalytic Properties Of Pt/Gc Electrodes, Sheng-Pei Chen, Yan-Xin Chen, Tao Huang, Xiao-Wen Hou, Shi-Gang Sun

Journal of Electrochemistry

Influence of electrolyte on the electrocatalytic properties of Pt/GC electrodes for formic acid oxidation were studied by using cyclic voltammetry, SEM and electrochemical in situ FTIR spectroscopy. It has demonstrated that the surfaces of Pt/GC electrodes prepared in H2SO4 (Pt/GC1) or in HClO4(Pt/GC2) are all composed of platinum particles, but which crystals are some differences in size and shape.Diameters of platinum particles on the surface Pt/GC1 are of 100~200 nm, and with spheral shape in the majority. The sizes of platinum particles on the Pt/GC2 electrode are larger in general,part of particles is of cube …

Go to article

Study On The Electrochemical Machining Of Titanium Alloys Tc4 With The Method Of Uniform Design, Mei-Li Zhang, Di Zhu, Zheng-Yang Xu Feb 2007

Study On The Electrochemical Machining Of Titanium Alloys Tc4 With The Method Of Uniform Design, Mei-Li Zhang, Di Zhu, Zheng-Yang Xu

Journal of Electrochemistry

For the electrochemical machining of titanium alloys,a passivating film tends to form on the machining surface,which holdbacks the process of machining;and some corrosive pittings can appear on the non-machining surface,which leading to the poor surface quality.So how to improve the machining surface quality,this is a hot problem in aerospace industries.An experiment plan has been made with the method of uniform design and the variance analysis has been carried out using the result data of the previous experiments.The experimental results show that an excellent machining surface with Ra 0.38 μm would be obtained in the electrolyte of 10% NaCl solution,4% Na …

Go to article

Investigations On Edlcs Using Pmma-Based Gel Polymer Electrolytes, Xiang-Li Meng, Jin-Ling Yin, Juan Ren, Bao-Hong Zhang Feb 2007

Investigations On Edlcs Using Pmma-Based Gel Polymer Electrolytes, Xiang-Li Meng, Jin-Ling Yin, Juan Ren, Bao-Hong Zhang

Journal of Electrochemistry

Polymethyl methacrylate(PMMA) based gel polymer electrolytes electrochemical double layer capacitors(GPE-EDLCs) were fabricated by an in situ polymerisatonal method with actived carbon electrodes,using propylene carbonate(PC) and ethylene carbonate(EC) as plasticizer,lithion perchlorate as surporting electrolytes.The ion conductivity values of GPEs were evaluated by AC impedance.The properties of PMMA-based GPEs capacitors were researched by impedance spectrum,cyclic voltammetry,galvanostatic charge-discharge.It showed that the ion conductivities of the PMMA-based gel polymer electrolytes reached to 3.7 mS·cm-1 at ambient tempreture.The working voltage of the capacitors reached to 3.0 V.The specific capacitance of the capacitor was obtained as high as 41.6 F·g-1(I=1 mA·cm-2).The …

Go to article

Electrochemical Characteristics Of La0.7-XCeXMg0.3Ni2.4Co0.6(X=0～0.4) Hydrogen Storage Alloys, Ling-Ling Xiao, Yi-Jing Wang, Yi Liu, Jian-Sheng Cao, Da-Wei Song, Li-Fang Jiao, Hua-Tang Yuan Feb 2007

Electrochemical Characteristics Of La0.7-XCeXMg0.3Ni2.4Co0.6(X=0～0.4) Hydrogen Storage Alloys, Ling-Ling Xiao, Yi-Jing Wang, Yi Liu, Jian-Sheng Cao, Da-Wei Song, Li-Fang Jiao, Hua-Tang Yuan

Journal of Electrochemistry

The effect of partial substitution of Ce for La on the structure and the electrochemical properties of the La0.7-xCexMg0.3Ni2.4Co0.6(x=0～0.4)hydrogen storage alloys have been investigated systematically.The result of X-ray powder diffraction(XRD) show that the alloys are all consisted of the LaNi3 phase and the LaNi5 phase.The maximum discharge capacity is decreased gradually with increase of the Ce contents,but the cycling life is improved obviously.

Go to article

Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen Feb 2007

Fabrication And Performance Of Ni-Scsz Cermet Anode Modified By Coating With Gd0.2Ce0.8O2 For A Sofc, Ren-Zhu Liu, Bo Huang, Xiao-Feng Ye, Shao-Rong Wang, Jia-Di Cao, Huai-Wen Nie, Ting-Lian Wen

Journal of Electrochemistry

A Ni-scandia-stabilized zirconia(Ni-ScSZ) cermet anode modified by coating with nano-sized gadolinium-doped ceria(GDC,Gd0.2Ce0.8O2) was prepared using a simple combustion process for the solid oxide fuel cell(SOFC) running on methane fuel. X-ray diffraction(XRD) and scanning electron microscopy(SEM) indicated that the surface of Ni-ScSZ was coated by nano-sized GDC particles(<100nm). Single cell testing showed that the 2.0%(by mass) GDC-coated Ni-ScSZ anode had better performance. The highest power densities of the cell with this anode were 825 and 848mW/cm2 at 850℃ in humidified hydrogen and methane, respectively, whereas the corresponding values were 584 and 586mW/cm2 for the cell with Ni-ScSZ anode.Electrochemical impedance spectra(EIS) illustrated that the cell with Ni-ScSZ anode exhibited far greater impedances than the cell with 2.0%(by mass) GDC-coated Ni-ScSZ anode.Then the …

Go to article

Electrochemical Oxidation Of The Phenol In The Chloride System, Yong Liu, Dan Liu, Shi-Lin Zhao, Jing-Jing Lai Feb 2007

Electrochemical Oxidation Of The Phenol In The Chloride System, Yong Liu, Dan Liu, Shi-Lin Zhao, Jing-Jing Lai

Journal of Electrochemistry

The Ru-Ir /Ti electrode as cathode to electrolysis the synthetic phenolic wastewater was studied. The effect of the initial chloride concentration on the electrolytic treatment result has been discussed. Experiment result shows that the electrochemical oxidation of phenol suits to one kinetics equation in given electrolytic time. If the initial chloride concentration in wastewater increases, the time of the electrochemical oxidation of phenol can be shorten, in other words the apparent rate constant is greater. The middle matters of electrochemical oxidation of phenol in the chloride system detected out by HPLC and GC-MS is mainly 1-chloro-phenol, 4-chloro-phenol, 2,4-dichloro-phenol, 2,6-dichloro-phenol, 2,4,6-trichloro-phenol, …

Go to article

Diamond-Like-Carbon Film Prepared On Stainless Steel Substrates By Liquid Phase Electrochemical Deposition, Jing-Yong Du, Gui-Feng Zhang, Guo-Qing Li, Xiao-Duo Hou Feb 2007

Diamond-Like-Carbon Film Prepared On Stainless Steel Substrates By Liquid Phase Electrochemical Deposition, Jing-Yong Du, Gui-Feng Zhang, Guo-Qing Li, Xiao-Duo Hou

Journal of Electrochemistry

Diamond-like carbon (DLC) films were deposited on stainless steel substrates at atmospheric pressure and low temperature (60 ℃) by electrolysis in a methanol solution with a pulseddirect current power supply. The morphology and microstructure of the resulting DLC films were analyzed using atomic force microscopy(AFM), scanning electron microscopy (SEM), Raman spectroscopy and Fourier transformation infrared spectrometry (FTIR). The experimental results show that the hydrogenated diamond-like carbon filmsare smooth and compact. Raman spectroscopy analysis confirmed the presence of a strongpeak at 1332.51 cm-1, which is assigned to crystalline diamond. The deposition rate can be enhanced to 0.5 μm/h by …

Go to article

Investigation Of Auni5 Films Deposited By Laser Ablation For Rf Mems Switches, Noha Sameh Ahmed Farghal Feb 2007

Investigation Of Auni5 Films Deposited By Laser Ablation For Rf Mems Switches, Noha Sameh Ahmed Farghal

Archived Theses and Dissertations

No abstract provided.

Go to article

Synthesis Of The Giant Dielectric Constant Material Cacu3ti4o12 By Wet-Chemistry Methods, Jianjun Liu, Robert W. Smith, Wai-Ning Mei Jan 2007

Synthesis Of The Giant Dielectric Constant Material Cacu3ti4o12 By Wet-Chemistry Methods, Jianjun Liu, Robert W. Smith, Wai-Ning Mei

Chemistry Faculty Publications

CaCu3Ti4O12 (CCTO) has a giant dielectric constant of up to 105 at room temperature and great potential for technological application. In this work, we report two wet-chemistry methods to synthesize CCTO at relatively low temperatures and short reaction times. The pure-phase sample was obtained at 800 °C for 0.5 h, and the grain size of a pellet sample sintered at 1030 °C has a homogeneous distribution in the range of 0.4–1.5 μm.

Go to article

Single -Walled Carbon Nanotubes Separation And Redox Chemistry And Their Applications For Optical Biosensing And Scaffold Materials, Xiaomin Tu Jan 2007

Single -Walled Carbon Nanotubes Separation And Redox Chemistry And Their Applications For Optical Biosensing And Scaffold Materials, Xiaomin Tu

Theses and Dissertations

Single-walled carbon nanotubes (SWNTs) have drawn great attention worldwide for their unique electronic, mechanical and optical properties. This dissertation details studies of some of the most important areas including: (1) Single-stranded DNA (ssDNA) assisted separation of SWNTs using high performance liquid chromatography; (2) Optical sensitivity and kinetic studies of redox reaction of ssDNA functionalized SWNTs with hydrogen peroxide (H 2 O 2 ); (3) Effects of Ag + on the redox reaction of ssDNA-encased SWNTs with hydrogen peroxide; (4) Single-walled carbon nanotube based optical sensors for DNA detection; and (5) SWNTs as scaffolds for promoting stem cell differentiation into bone …

Go to article

Four Novel Co-Precipitation Procedures For The Synthesis Of Lanthanum-Strontium Manganites, Vuk Uskoković, Miha Drofenik Jan 2007

Four Novel Co-Precipitation Procedures For The Synthesis Of Lanthanum-Strontium Manganites, Vuk Uskoković, Miha Drofenik

Pharmacy Faculty Articles and Research

Lanthanum-strontium manganites were synthesized using co-precipitation method with a reverse micellar microemulsion. Either oxalic acid, sodium hydroxide or tetramethylammonium hydroxide was used for the precipitation of precursor cations in a form that was subsequently calcined under various conditions in order to obtain perovskite manganite phase. Correlations between the properties of the synthesized powder and the calcination conditions have been put forth. The properties of the microemulsion-assisted synthesized material were compared with the samples prepared by following the supposedly similar chemical recombinations in bulk solutions, with an aim to challenge the fact that microemulsions in general have only templating effects on …

Go to article

The Shape Of Pulverized Bituminous Vitrinite Coal Particles, Jonathan P. Mathews, Patrick G. Hatcher, Alan W. Scaroni Jan 2007

The Shape Of Pulverized Bituminous Vitrinite Coal Particles, Jonathan P. Mathews, Patrick G. Hatcher, Alan W. Scaroni

Chemistry & Biochemistry Faculty Publications

The shape of pulverized bituminous coal particles (vitrinites) was determined by optical and laser light scattering. Vitrain samples were collected from obvious tree remains located in the ceilings of two Appalachian coal mines. Wet sieving produced narrow size cuts. The particles were determined to be oblong or blocky in shape, with average length-to-width ratio of 1.7 and sphericity of 0.78. They were analogous in shape to a square ended, rectangular "house brick". The two bituminous coals and different size cuts of each coal had essentially the same shape parameters. Characteristic heating times and terminal velocities were higher by 22 and …

Go to article

Improved Nitrate Sensing Using Ion Selective Electrodes Based On Urea–Calixarene Ionophores, Benjamin Schazmann, Dermot Diamond Jan 2007

Improved Nitrate Sensing Using Ion Selective Electrodes Based On Urea–Calixarene Ionophores, Benjamin Schazmann, Dermot Diamond

Articles

Urea–calix[4]arenes 1 and 2 were synthesised and incorporated into ISE membranes for assessment as sensors for inorganic anions in water. 1 revealed a strong response to all anions following the Hofmeister selectivity order. For ISEs of 2, the response to a portion of the anion series was suppressed, increasing the margin of selectivity of nitrate over chloride, a common interferant of nitrate in fresh and marine water samples. The performance of ISEs containing 2 was compared to commercially available alkylammonium nitrate ion-exchange salts used for nitrate sensing. Our ISEs performed favourably in terms of sensitivity, linear range and LOD performing …

Go to article

A Novel Tio2 / Pvc Layer For Use In A Photoelectrochemical Cell, Faiza Touati, John Cassidy, Kevin Mcguigan Jan 2007

A Novel Tio2 / Pvc Layer For Use In A Photoelectrochemical Cell, Faiza Touati, John Cassidy, Kevin Mcguigan

Articles

A novel method of coating titanium dioxide on a glassy carbon electrode as a polyvinylchloride composite , is described. On illumination , there is an enhanced voltammetric current at this TiO2/PVC composite in aqueous formic acid solution. This electrode is used as the basis of a formic acid fuel cell where oxygen is reduced at a platinum cathode. The system yields 100 cm-2 for 0.01 mol dm-3 HCOOH in 0.1 mol dm-3 NaOH under illumination from a 150 W xenon lamp. The current without illumination is 0.5 cm-2.

Go to article

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu Nov 2006

Synergistic Functions Of Trimethl Phosphate And Vinylene Carbonate As Additives For The Li-Ion Batteries, Zhi-Yuan Tang, Yan-Bing He, Quan-Sheng Song, Yu-Hong Chen, Yuan-Gang Liu, Qiang Liu

Journal of Electrochemistry

The cooperative effects of trimethl phosphate and vinylene carbonate as additives for Li-ion batteries are investigated by using the cyclic voltammetry,electrochemical impedance spectroscopy and scanning electronic micro-photographs.The results show that the combination application of TMP and VC as additives for Li-ion batteries not only enhances safety of the batteries,but also improves their cycling performance.The reason may be ascribed to firstly VC being reduced and the reduction product polymerized to form excellent solid electrolyte interface(SEI) layer on the surface of graphite electrode during the first charge and discharge process,which prevents effectively the decomposition of TMP on the surface of the graphite …

Go to article

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou Nov 2006

Facilitated Effect Of Ag To Oxygen Transportation In Pem Fuel Cell Air Cathodes, Hong-Feng Xu, Jian-Hua Dong, Xiang-Li Hou

Journal of Electrochemistry

Silver(Ag) was deposited in the pores of Nafion membrane by ion exchange and succedent hydrogen reduction;the structures of Nafion-Ag membrane were measured by TEM and XRD,the diffusion coefficients of oxygen in Nafion-Ag was determined by electrochemical limited current method.The results showed that after deposited silver,the pores in the Nafion were enlarged by silver grains;the oxygen diffusion coefficient was increased about four times.By introducing silver in the thin Nafion film around the cathode catalyst,the performance of PEM fuel cell have a evident increasing in high current density, which shows the facilitated effects of silver to oxygen transportation in PEM fuel cell.

Go to article

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li Nov 2006

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li

Journal of Electrochemistry

Cathode materials LiNi1/3Co1/3Mn1/3O2 were prepared by low-heating solid-state reaction.The micro-structure and morphology of as-synthesized materials have been investigated by using XRD and SEM. The compatibilities of LiNi1/3Co1/3Mn1/3O2 with purchased LiPF6/ EC+DMC+DEC electrolyte and prepared LiBOB/EC+DEC+EMC electrolyte have also been studied. The Li/LiNi1/3Co1/3Mn1/3O2 batteries showed excellent electrochemical properties in the LiPF6/EC+DMC+DEC electrolyte. Reversible discharge capacities of 167, 163, 163, 157, 147mAh/g at 0.5C, 1C, 1.5C, 2C, 3C rate between 2.7~4.35 V, with stable cycling performances have …

Go to article

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen Nov 2006

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen

Journal of Electrochemistry

Electrochemical behavior of Bup has been investigated by means of cyclic voltammetry,linear sweep voltammetry,differential pulse voltammetry and square wave voltammetry.The results indicate that the electrochemical behavior of Bup on the surface of glassy carbon electrode is corresponding to a irreversible two-protons and two-electrons process with absrption.The square wave voltammetry for determination of Bup in actual samples has been established.

Go to article

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai Nov 2006

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai

Journal of Electrochemistry

A new electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate,gadolinium hexacyanoferrate(GdCHF),was prepared by electrochemically deposition on the surface of a glassy carbon electrode with a potential cycling procedure.The result of SEM indicated that the GdHCF was in the form of particles adhered on the surface of electrode.There were two different shapes and sizes of GdHCF forming on the surface of electrode.FTIR spectrum of GdHCF showed a very strong and sharp peak,which located at 2062.5 cm-1 and corresponded to the stretching vibration of the C≡N group in the GdHCF.The cyclic voltammetric results indicated that the GdHCF/GC electrode exhibited two …

Go to article

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang Nov 2006

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang

Journal of Electrochemistry

Monolithic carbon/nickel oxide composite materials were synthesized by carbonization of phenol formaldehyde gels that were ion-exchanged with Ni2+.Atomic absorption spectroscopy and powder X-ray diffraction technique were used to characterize the chemical composition and physical structure of the materials.The nickel dope amount for this method can reach 5.9 %(by mass).Subsequent cyclic voltammetry experiments indicate that the materials exhibit best capacitive performance at the nickel content of 4.4 %.

Go to article

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou Nov 2006

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou

Journal of Electrochemistry

A rapid process is described to produce single or multiple electrodes of any shape based on CO2 laser ablation for microfluidic chip.The method is as follow: coating a kind of material as sacrifice layer on a piece of glass with sputtered Cr and Au;designing the needed pattern on a computer;selecting proper parameters and ablating with CO2 laser;wiping of Au/Cr and sacrifice layer,and obtain electrodes at last.The microfluidic chip was gotten by reversely bonding with a piece of PDMS,and sealing around with PDMS prepolymer.The mask' effect is the main factor that influencing electrode quality.The width of electrodes could be …

Go to article

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma Nov 2006

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma

Journal of Electrochemistry

Gold nanocrystals with controllable size were synthesized through a simple electroreduction method using poly(N-vinylpyrrolidone)(PVP) of different polymerization degree as both stabilizer and shape-controller for gold nanoclusters.Individual gold nanoparticles spontaneously assembled into the wire-and ring-shaped nanoparticle aggregates depending on the PVP's dynamic stretching and curling,and precursor nanoparticles grew into flat,single-crystalline nanoprisms with thickness of dozens of nanometers based on the oriented aggregation between particles.Besides,core-shell Au/Ag nanoparticles were conveniently synthesized through two-step electroreduction of noble metal ions in the presence of PVPK30.The electrochemical synthetic method based on PVP provides a new path for preparation of noble metal nanostructured materials with different shape …

Go to article

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen Nov 2006

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen

Journal of Electrochemistry

Oxide and Pd on carbon composite catalysts have been prepared by intermittent microwave heating(IMH) method.The performance of the catalysts for glycerol oxidation in alkaline solution is studied by electrochemical techniques.It is shown that the Pd/C catalyst is active for glycerol electrooxidation.However,the oxide-Pd/C catalysts are even better in terms of the onset potential that is more negative and peak current density.The ratio of oxide to Pd is optimized according to the electrochemical measurement.The results reveal that the addition of oxide into the Pd/C induces the synergistic effect for glycerol electrooxidation.

Go to article

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia Nov 2006

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia

Journal of Electrochemistry

Treatment of pulping wastewater by using a novel electrochemical reactor,i.e.the three phase fluidized bed electrode,reactor were invesigated.The effects of air flow rate,applied voltage,pH value and FeSO4 concentration on electrolysis efficiency were investigated.It was clearly shown that the 20 V of voltage,0.3 m3·h-1 of air flow rate,1000 mg L-1 of FeSO4 concentration and pH≈2.5 were its best conditions.COD removal could be 70.1% under these conditions.

Go to article

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma Nov 2006

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma

Journal of Electrochemistry

Powder micro-electrodes were prepared from raw carbon nanotubes and carbon nanotubes modified by carboxyl.The electro-reduction properties of both the raw and open-ended carbon nanotubes in p-Nitrophenol solution were investigated.The FTIR spectrum result indicated that the functional groups are successfully fixed on the surface of the carbon nanotubes after nitric acid treatment.The cyclic voltammetry results show that the electrochemical activity of carboxyl-modified carbon nanotubes was improved.The mechanism of electro-(reduction) for the carbon nanotubes after acid treatment was discussed.

Go to article

Stm Tip-Induced Nanostructuring-Replacement Method To Construct Pt Surface Nanostructures, Jin-Gang Wang, Jing Tang, Zhao-Bin Chen, Bing-Wei Mao Nov 2006

Stm Tip-Induced Nanostructuring-Replacement Method To Construct Pt Surface Nanostructures, Jin-Gang Wang, Jing Tang, Zhao-Bin Chen, Bing-Wei Mao

Journal of Electrochemistry

STM tip-induced surface nanostructuring based on "Jump-to-contact" mechanism is a nanostructuring technique that has the highest resolution in aqueous solutions.However,for metals that have high cohesive energy,atoms would transfer from surface to tip instead,which limits the wide application of this technique.In this paper,we present a two-step Nanostructuring-Replacement method to construct metal nanoclusters that cannot be obtained directly via the "Jump-to-contact" mechanism.The method is demonstrated to construct Pt nanoclusters that are of great interest in catalysis and electrocatalysis but cannot be constructed via the "Jump-to-contact" mechanism.Since Cu is the most intensively studied and successful system in the tip-induced nanostructuring,it is utilized as …

Go to article

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen Nov 2006

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen

Journal of Electrochemistry

The rate-determining step of V(Ⅳ) /V(Ⅴ) redoxreaction was investigated at graphite felt(GF)composite electrode by various techniques: cyclic voltammetry,polarization curve and impedance spectroscopy.Cyclic voltammetry analysis indicated that V(Ⅳ) /V(Ⅴ) redox reaction at GF electrode is quasi reversible.Acertain chemical reaction step is suspected to follow the electron transfer step of this reaction.The Tafel slopevalue(0.124) obtained from the polarization curve agrees well with theoretical value(0.12),which supposingthe electron transfer step was the rate-determining step.Impedance Spectroscopies at various potentials werestudied and simulated by equivalentcircuits.The impedance value of the electron transfer step modified is greatlyhigher than the others,which shows that the electron transfer step is the …

Go to article

First Prev Next Last