Systems Engineering Commons^™

A Structured Project-Risk Management And Life Cycle Framework For Complex Systems: Ship Repair And Maintenance (Sr&M) Projects, Michael Craig Plumb

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation contributes to insights regarding the implications of using Project Risk Management (PRM) and Life Cycle Assessment (LCA) in managing projects for a complex system. The PRM approach apprehends many forms of risk both internal and external within a given project and assists the manager in determining the level of importance of each individual project phase and component to optimize project success. The life cycle approach to project management is used with short-term limitations with respect to a product's life cycle over several years. The literature discusses many tools and techniques that assist project managers in implementing optimal solutions, …

A Method To Improve The Sustainment Of Systems Based On Probability And Consequences, Michael Ashton Gaintner

Engineering Management & Systems Engineering Theses & Dissertations

The FROST Method is presented which improves the efficiency of long-term sustainment of hardware systems. The FROST Method makes sustainment and scheduling decisions based on the minimization of the expected value of current and future costs. This differs from current methods which tend to base decisions not on the expected value of costs, but on the expected inventory demand found through projections using data which is often inaccurate.

Distributions are used to account for randomness and inaccuracy in inputs such as failure rates and vendor-claimed dates for end of production. A Monte Carlo technique is then used to convert these …

A Hybrid Lehmer Code Genetic Algorithm And Its Application On Traveling Salesman Problems, Jun Zhang

Engineering Management & Systems Engineering Theses & Dissertations

Traveling Salesman Problems (TSP) is a widely studied combinatorial optimization problem. The goal of the TSP is to find a tour which begins in a specific city, visits each of the remaining cities once and returns to the initial cities such that the objective functions are optimized, typically involving minimizing functions like total distance traveled, total time used or total cost.

Genetic algorithms were first proposed by John Holland (1975). It uses an iterative procedure to find the optimal solutions to optimization problems.

This research proposed a hybrid Lehmer code Genetic Algorithm. To compensate for the weaknesses of traditional genetic …

A Primary Care Workload Production Model For Estimating Relative Value Unit Output, Rachel G. Murphy

Theses and Dissertations

Health care costs have grown to unsustainable levels nationally and within the Department of Defense. Military health care costs have historically been difficult to isolate, causing budget cuts to be the vehicle for cost control. Maximum efficiency, therefore, is the goal in order to show improvement. With the Air Force’s new preventive health plan, they aim to drive a long-term posture for cost reduction through prevention. This research effort aimed to develop a tool to assist in future efforts to understand and improve efficiency in workload output, and whether a relationship exists between patient workload demand and the per-encounter variables …

Application And Validation Of Concept Maturity Assessment Framework, Mathews C. Scharch, Jeremy J. Homan

Theses and Dissertations

Far too often decision makers select concepts based on insufficient data, resulting in projects that are over-budget, over-schedule, and not what the customer wants. Research efforts have proposed a stage-gated concept maturity framework as a tool to assess and increase the maturity of concepts. This research uses multiple validation techniques to demonstrate the value this framework can provide. Interviews with acquisition professionals capture qualitative and quantitative data on the utility of the elements of the framework and the acquisition process. This research also applies the framework to a current acquisition program to determine if it can be broadly applied for …

Design Of Online Student Fee Committee Proposal Information System, Kenneth Cairns, Gregory (Greg) Jacobson

Industrial and Manufacturing Engineering

The purpose of this project is to overhaul the IME department’s Student Fee Committee (SFC) proposal system. A web enabled database was designed in order to improve this system. A significant amount of time was spent researching different programming languages, paradigms, and frameworks in order to determine the most logical approach to the system redesign. After a few false leads, it was determined that the most appropriate solution to the problem was to design a C# based web form application using asp.NET technology, developed in Microsoft Visual Studio. A mockup was created in Access in an attempt to determine if …

Ambulatory Healthcare Utilization In The United States: A System Dynamics Approach, Rafael Diaz, Joshua G. Behr, Mandar Tulpule

VMASC Publications

Ambulatory health care needs within the United States are served by a wide range of hospitals, clinics, and private practices. The Emergency Department (ED) functions as an important point of supply for ambulatory healthcare services. Growth in our aging populations as well as changes stemming from broader healthcare reform are expected to continue trend in congestion and increasing demand for ED services. While congestion is, in part, a manifestation of unmatched demand, the state of the alignment between the demand for, and supply of, emergency department services affects quality of care and profitability. The central focus of this research is …

Standardization For Retail Facility Layout For Patagonia, Inc., Derek King

Industrial and Manufacturing Engineering

The purpose of this project is to create a standard layout for Patagonia retail stores. Currently, Patagonia has no standard layouts to follow when they update or open a new store; this has resulted in improper layouts and not fulfilling customers’ needs. This project will develop a way for Patagonia to solve both of these problems based on statistical engineering. The outcome of this project will result in a standard way for determining the optimal layout for new or updated Patagonia retail stores while meeting the business needs of the location.

Mh-53j/M Pave Low Iii/Iv Systems Engineering Case Study, Air Force Center For Systems Engineering, William Albery, Raymond L. Robb, Lee Anderson

AFIT Documents

No abstract provided.

Achieving Ultrafine Grains In Mg Az31b-O Alloy By Cryogenic Friction Stir Processing And Machining, Anwaruddin Mohammed

Theses and Dissertations--Manufacturing Systems Engineering

This thesis presents results from the application of cryogenic cooling on multiple-pass friction stir processing and the subsequent orthogonal machining on friction stir processed and as-received Mg AZ31B-O disks, and shows their combined effects on microstructure and microhardness values. A simple friction stir tool, a specially designed fixture and liquid nitrogen are used to perform multiple-pass friction stir processing experiments on Mg AZ31B-O alloy. The friction stir processed and as-received sheets are then made into disks for the orthogonal machining experiments. This study analyzes the microhardness, microstructure changes by cryogenic friction stir processing and the effect of machining conditions such …

Development Of Risk Uncertainty Factors From Historical Nasa Projects, Tahani R. Amer

EMSE Doctoral Projects

NASA is a good investment of federal funds and strives to provide the best value to the nation. NASA has consistently budgeted to unrealistic cost estimates, which are evident in the cost growth in many of its programs. In this investigation, NASA has been using available uncertainty factors from the Aerospace Corporation, Air Force, and Booz Allen Hamilton to develop projects' risk posture. NASA has no insight into the developmental of these factors and, as demonstrated here, this can lead to unrealistic risks in many NASA Programs and projects (P/p). The primary contribution of this project is the development of …

Architecture Value Mapping: Using Fuzzy Cognitive Maps As A Reasoning Mechanism For Multi-Criteria Conceptual Design Evaluation, Atmika Singh

Doctoral Dissertations

"The conceptual design phase is the most critical phase in the systems engineering life cycle. The design concept chosen during this phase determines the structure and behavior of the system, and consequently, its ability to fulfill its intended function. A good conceptual design is the first step in the development of a successful artifact. However, decision-making during conceptual design is inherently challenging and often unreliable. The conceptual design phase is marked by an ambiguous and imprecise set of requirements, and ill-defined system boundaries. A lack of usable data for design evaluation makes the problem worse. In order to assess a …

The Effects Of Anti-Price Gouging Legislation On Supply Chain Dynamics, Jason Edward Maynard

Master's Theses

The purpose of this thesis is to model the effects of anti-price gouging (APG) legislation on the costs to businesses during the recovery period of a disaster. A system dynamics model of a business’s replenishment procedures is used to simulate the effects of APG legislation on business performance. Economists have published expansive research on the effects of price ceilings on supply and demand, but there is little research evidence on the operational consequences of price ceiling legislation on business costs. APG legislation increases consumer’s forward buying and shortage gaming after a disaster by removing price incentives to be frugal. Forward …

Proving Sustainability: The International Development Monitoring Initiative, Evan A. Thomas, Zdenek Zumr

Mechanical and Materials Engineering Faculty Publications and Presentations

Nearly a billion people in the world lack access to safe drinking water, two billion have inadequate sanitation facilities, three billion use biomass for their daily energy needs and nearly half the world's population live in rural isolation, lacking access to the most basic human services. Combined, these limitations are a leading cause of the perpetuating cycle of poverty and political insecurity. Meanwhile, the majority of international development agencies are responsible for self-reporting project outcomes. At best, expert spot-checks are conducted in the field occasionally. These results tend to show individual project success, while meta- surveys indicate on-going challenges in …

Delayed-Bang Approach Towards More Sustainable Critical Infrastructure Risk Management, C. Ariel Pinto, Michael K. Mcshane, Abhishek S. Pathak

Finance Faculty Publications

This article describes the Delayed Bang Approach for determining the value of risk management alternatives in critical infrastructure security. The discussion includes (1) the need for sustainable risk management (2) the importance of time valuation in evaluating competing loss prevention and loss reduction alternatives, (3) the convergence of deterministic engineering economics, survivability analysis, and probabilistic analysis, and (4) hypothetical examples of the Delayed-Bang Approach and significance towards more sustainable risk management.

Design And Analysis Of A Speed-Aware Routing Protocol For Mobile Ad Hoc Networks, Kirthana Akunuri

Masters Theses

"The flexibility of movement for the wireless ad hoc devices, referred to as node mobility, introduces challenges such as dynamic topological changes, increased frequency of route disconnections and high packet loss rate in Mobile Ad hoc Wireless Network (MANET) routing. This research proposes a novel on-demand routing protocol, Speed-Aware Routing Protocol (SARP) to mitigate the effects of high node mobility by reducing the frequency of route disconnections in a MANET. SARP identifies a highly mobile node which forms an unstable link by predicting the link expiration time (LET) for a transmitter and receiver pair. When the nodes have high relative …

Quantifying The Carbon Footprint Of Lean Waste, Kristen Donovan Balinski

Masters Theses

"The objective of this paper is to provide a method of quantifying lean wastes in terms of carbon dioxide emissions by using value stream mapping. Lean manufacturing, a process based on waste identification and reduction, is a growing trend in industry and a proven method of lowering costs. The environmental impact of these wastes can be quantified by identifying the metrics associated with them, and using existing reports to convert those metrics into measurements of carbon dioxide. Growing environmental concerns are prompting federal government regulation of greenhouse gas or carbon dioxide emissions, as seen in the American Clean Energy and …

Integration Of Model-Based Systems Engineering And Virtual Engineering Tools For Detailed Design, Akshay Kande

Masters Theses

"Design and development of a system can be viewed as a process of transferring and transforming data using a set of tools that form the system's development environment. Conversion of the systems engineering data into useful information is one of the prime objectives of the tools used in the process. With complex systems, the objective is further augmented with a need to represent the information in an accessible and comprehensible manner. The importance of representation is easily understood in light of the fact that the stakeholder's ability to make prompt and appropriate decisions is directly related to his understanding of …

Presentation: Proving Sustainability: The International Development Monitoring Initiative, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

Presentation detailing the activities and products of the Sustainable Water, Energy and Environmental Technologies Laboratory at Portland State University (SWEETLab). The lab also works to develop standards to help evaluate and compare projects and outcomes around the world. Water treatment and sanitation practices, as well as newly designed cookstoves, are highlighted.

Developing A Time And Motion Study For A Lean Healthcare Environment, Michael Winston Patton Jr.

University of Kentucky Master's Theses

This thesis outlines the development of a standard methodology for performing a time and motion study in a lean healthcare environment. Time and motion studies have been used in healthcare environments in the past, however they have nearly all been exclusive to a particular healthcare enterprise. To develop the time and motion study methodology, a study was designed to examine how resident doctors spend their time. This study was performed in response to coming changes in the work hours for all residents. Once the methodology was developed, trial observations were conducted. The data from these observations was analyzed to determine …

Assessing System Architectures: The Canonical Decomposition Fuzzy Comparative Methodology, Jason Paul Dauby

Doctoral Dissertations

"The impacts of decisions made during the selection of the system architecture propagate throughout the entire system lifecycle. The challenge for system architects is to perform a realistic assessment of an inherently ambiguous system concept. Subject matter expert interpretations, intuition, and heuristics are performed quickly and guide system development in the right overall direction, but these methods are subjective and unrepeatable. Traditional analytical assessments dismiss complexity in a system by assuming severability between system components and are intolerant of ambiguity. To be defensible, a suitable methodology must be repeatable, analytically rigorous, and yet tolerant of ambiguity. The hypothesis for this …

Development Of Stem Tools Using Nasa's Systems Engineering Design Approach, J Chevallier, D Hamilton, B Landers, W Landers, B Setayesh

Von Braun Symposium Student Posters

No abstract provided.

Implementation Of Nasa's System Engineering Design Process In The Development Of An Optical Guitar Pickup, Stephanie Buckner, Jared Nelson, Ben Fowler, Samuel Hobbs, Chris Kirchner

Von Braun Symposium Student Posters

No abstract provided.

How A Systems Engineer Starts..., Herman Migliore

Systems Science Friday Noon Seminar Series

Dr. Migliore will review systems engineering as a process for developing products, processes, and services and suggest views that encourage systems thinking. As an example, he will focus on the beginning of the development process, the fuzzy front end, and discuss a method, ConOps, for getting started using examples from PSU's masters program.

International Space Station Systems Engineering Case Study, Air Force Center For Systems Engineering, Bill Stockman, Joe Boyle, John Bacon

AFIT Documents

This case study on the International Space Station considers what many believe to have been the ultimate international engineering project in history. The initial plans involved the direct participation of 16 nations, 88 launches and over 160 spacewalks-more space activities than NASA had accomplished prior to the 1993 International Space Station decision. Probably more important was the significant leap in System Engineering (SE) execution that would be required to build and operate a multi-national space station. In a short period of time, NASA and its partners had to work out how to integrate culturally different SE approaches, designs, languages and …

Second-Generation International Space Station Total Organic Carbon Analyzer Verification Testing And On-Orbit Performance Results, Nicole L. Bentley, Evan A. Thomas, Michael Van Wie, Chad Morrison

Mechanical and Materials Engineering Faculty Publications and Presentations

The International Space Station (ISS) total organic carbon analyzer (TOCA) is designed to autonomously assess recovered water quality by providing an indication of total organic carbon (TOC). The current TOCA has been on the ISS since November 2008. Functional checkout and operations revealed complex operating considerations. Specifically, failure of the hydrogen (H2) catalyst resulted in development of an innovative oxidation analysis method. This method reduces activation time and limits the H2 produced during analysis, while retaining the ability to indicate TOC concentrations within 25% accuracy. Subsequent testing and comparison to archived samples returned from the station and tested on the …

Developing Sustainable Life Support System Concepts, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long-duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long-term reliability and sustainability of the hardware. This paper presents point-of-departure Sustainable System Mass (SSM) evaluation criteria for life support systems that may allow more robust technology development, testing, and comparison. An example sustainable water recovery system concept is presented.

Post-Project Risk Perception And Systems Management Reaction, Baqer Alali

Engineering Management & Systems Engineering Theses & Dissertations

The objective of this research is to identify whether risk management in projects has any role in risk management in systems. Projects, systems, and risk management are three integral concepts in the management of various enterprises and agencies. Risk management is a common concept in systems and project processes. To avoid failures or crisis during their life cycles, projects and systems managers practice risk management. Projects and systems have well defined life cycles during which the risk is defined, controlled, and managed. Risk management is conducted in each phase of projects and systems. Projects are initiated to close certain operational …

Lean Inventory Management System For Boeing Missile Defense, Danielle Partridge

Industrial and Manufacturing Engineering

Lean inventory management is influential for business. One of the wastes businesses aim to reduce, using lean principles, is inventory. Inventory management provides the essential tools for eliminating extra inventory and cost that is tied up in capital.

Boeing’s Ground Based Missile Defense inventory area was failing at meeting their proprietary lean manufacturing goals. There was a need for an inventory system that included: lean principles, inventory management and user-friendly capability. The goal of this project’s inventory management database process was to minimize inventory investment while still meeting functional requirements. The deliverables for this project met the needs of Boeing’s …

Ergonomic Methods To Improve Safety In The Construction Sector And Reduce Costs, Mona Barjasteh

Industrial and Manufacturing Engineering

Many small construction companies have difficulty providing a safe working environment for their employees because of their lack of resources. There is a need to provide a manual for small construction companies employing 10 or fewer workers with the best ergonomic solutions of the top most common injuries. Accidents in the construction field are very high with nearly 175,00o nonfatal injuries and 1,121 deaths in 2002. The nonfatal cases occur 7.1 times per 100 full time workers, while serious injuries occur 2.8 times per 100 full time workers. This information reveled the importance of focusing on minor injuries in order …