Systems Engineering Commons^™

Design Of A Fuzzy Set-Point Tracking Controller Based On The State-Dependent Control Characteristics Of Fuzzy Logic And Pid For Temperature Control Systems In Electrical Equipment, Rahim Mammadzada

Chemical Technology, Control and Management

This paper presents a Fuzzy-SPT (Fuzzy Set-Point Tracking) controller designed to combine the strengths of FLC (Fuzzy Logic Control) and PID (Proportional-Integral-Derivative) control while mitigating their limitations across varying operating conditions. Inspired by state-dependent reasoning but implemented within a single controller, the method uses internal logic to adapt the control effort across different operating regions. FLC handles rapid changes and nonlinear transients, enabling fast system response without overshoot, while PID-like integral action is activated when the FLC reaches steady state or enters a threshold region near the set point, eliminating residual errors and maintaining stable performance. By applying each behavior …

Warehouse Reconfiguration With Ats Lab, Ed Cantor, Dana Pazhouhesh, Mathew Oshinski, Samantha Sanchez

Senior Design Project For Engineers

The ATS Lab Warehouse Reconfiguration project is a collaborative effort between Kennesaw State University’s Department of Industrial and Systems Engineering and ATS Lab, located in Marietta, GA. The goal of this project is to redesign the current warehouse layout to enhance operational efficiency, reduce travel time, and implement sustainable inventory management practices, including 5S and Kanban. Aaron Roob, ATS Operations Manager, and Franklin Hungerford, Continuous Improvement Manager, led this initiative. Our team, “Sick Sigma’s,” is composed of Ed Cantor, our Project Manager, who is working as an intern at ATS during this process; Dana Pazhouhesh (Process Engineer); Matthew Oshinski (Quality …

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …

Kinship Infrastructure Design: Evaluating Diversity And Resilience In Emergency Response Systems Through Agent-Based Modeling, Fayruz Maysha

Doctoral Dissertations and Master's Theses

Traditional infrastructure systems are often designed for predictable scenarios, making them vulnerable to disruption when real-world conditions change unexpectedly. This research addresses that limitation by introducing Kinship Infrastructure Design (KID), a bioinspired framework based on the kinship coefficient (Φ). Adapted from studies of genetic relatedness in eusocial insects, the kinship coefficient (Φ) measures similarity and diversity among system components by calculating the degree to which their functional traits—encoded as a synthetic genome—match. This research investigates whether a system design can achieve a “Goldilocks Zone” of functional diversity where systems achieve optimal adaptability and coordination under uncertainty."

Rather than relying on …

Barriers To Modernizing Aviation Maintenance Technician Education To Meet Emerging Industry Needs, Durwa Chavan

All Theses

Modernizing aviation maintenance education is essential to keep pace with emerging technologies, including electric propulsion systems and advanced avionics. As aircraft systems become more digitized and interconnected, there is a growing demand for qualified technicians who can conduct advanced diagnostics and maintenance. However, training programs have not kept pace with these technological shifts, creating a gap between workforce preparation and industry needs.

Using a qualitative research approach, this study conducted semi-structured interviews with industry professionals, educators, and regulatory personnel to identify gaps in existing training programs and Airman Certification Standards (ACS). This study addresses the disconnect between current aviation maintenance …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …

Engineering Risk And Indigenous Resilience Toward Intelligent Decision Support For Mining In Ancestral Lands, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

Mining within ancestral territories reveals an ongoing conflict between technical viability and Indigenous consent. This collaborative study, conducted by an engineering scholar and a policy researcher of Indigenous heritage in Benguet among the Ibaloi and Kankanaey peoples, investigates how risk transparency and policy alignment can bridge existing divides, while formulating principles applicable to other Indigenous mining contexts. The study provides an initial evaluation of the feasibility of a proposed large-scale mining operation within a risk-informed, data-driven governance framework. Three elements of engineering risk were assessed utilizing literature-derived and proxy parameters: (1) Land degradation is indicated by a Soil Productivity Index …

Comparative Analysis Of Emergent Behaviors Of Three Drone Swarm System Models For Targeting Using Agent-Based Modeling And Simulation, Arsenio T. Gumahad Ii

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation introduces a novel computational simulation framework for evaluating the emergent behaviors of three swarm drone models using Agent-Based Modeling and Simulation (ABMS). The three swarm models are a Leader-Follower swarm model based on Bruckstein's antline theory, a Flocking model based on a simplified Reynolds 'Boids’ model, and a Stigmergic model with pheromone-based coordination. The primary objective of the simulation is to evaluate the performance of these models in delivering a user-defined number of drones of each type to a target area of interest in four separate scenarios, resulting in 50,000 separate simulation trials. Each scenario was structured to …

Exploring The Link Between Emotional States And Coding Task Quality: A Pilot Study, Aquib Reshad, Valentina Nino, Maria Valero, Adriane Randolph, Yang Shi

Faculty Articles

Emotions play a crucial role in shaping cognitive performance, yet their influence on programing remains understudied. This pilot study investigates the relationship between emotional states and coding task quality. Ten participants completed a programing task while their brain activity was recorded using electroencephalography (EEG), with frontal alpha asymmetry (FAI) applied as a neural marker of emotional valence. Emotional self-reports were collected using the Scale of Positive and Negative Experience (SPANE), and coding quality was evaluated through a structured rubric. Preliminary findings indicate a potential association between FAI and coding performance, whereas self-reported affect showed weaker or inconsistent patterns. Given the …

Experiential Learning And The Revitalization Of Manufacturing Education At The University Of Dayton, Sean Cahill

Research and Reflection on Learning and Teaching in Higher Education

This perspective paper explores the role of experiential learning in preparing future-ready manufacturing engineers at the University of Dayton, set against the backdrop of Dayton’s legacy as an industrial innovator and the broader national movement to revitalize domestic manufacturing. As automation, cyber-physical systems, and Industry 4.0 technologies reshape the manufacturing landscape, there is a growing need for engineers who possess both technical fluency and systems-thinking capabilities. To meet this need, the manufacturing engineering technology department implemented hands-on, integrated lab-and-lecture modules through support from the Experiential Learning Innovation Fund for Faculty (ELIFF). Grounded in Kolb’s Experiential Learning Theory and constructivist learning …

Acoustic-Based Quality Monitoring In Fused Deposition Modeling (Fdm) 3d Printing, Madeleine Howard

College of Engineering Summer Undergraduate Research Program

This project investigates the use of acoustic signals captured during Fused Deposition Modeling (FDM) 3D printing to predict part quality and detect process anomalies. Traditional quality monitoring in FDM often relies on visual inspection or post-process evaluation, which can be slow and inconsistent. This research explores a low-cost, non-contact alternative using microphones and accelerometers to capture real-time audio and vibration signatures of the printing process. By applying signal processing and machine learning techniques to these acoustic signals, the project aims to classify part quality and identify defects such as under-extrusion, layer misalignment, or nozzle clogging. The outcomes have potential applications …

Resilience Engineering Via Bifurcation And Ecological Network Analysis: Demonstrated In An Electric Power Case Study, Rogelio Gracia Otalvaro

Doctoral Dissertations and Master's Theses

Modern systems are increasingly complex, interconnected cyber-physical systems that combine digital controls with physical infrastructure. This integration, along with the constant introduction of new technologies and actors into the network, enables reliable operation but introduces vulnerabilities to unexpected and varied disruptions and cascading failures, making resilience a critical concern. Traditional risk management and resilience assessment methods often struggle with the nonlinearity and dynamic behavior of these systems. This dissertation proposes a novel approach combining Bifurcation Analysis (BA) and Ecological Network Analysis (ENA) to enhance the understanding and improvement of system resilience. BA, a mathematical method from dynamical systems theory, is …

Dynamic Flowsheet Modeling Of Shot Peening Processes, Langdon Feltner, Paul Mort

15th International Conference on Shot Peening

Process flowsheet modeling is used to map and predict performance by integrating sub-models within a system. This paper presents a dynamic flowsheet for shot peening used to track the effects of media characteristics, removal of worn media, and replenishment thereof. Input parameters include media characteristics, media feed rate, velocity (i.e., air pressure), effective impact area (i.e., nozzle setup), and recharge replenishment. The media working mix is described dynamically using tri-modal size and shape characteristics: as-manufactured, conditioned, and worn modes, each having impact-dependent rate coefficients for transition to the next mode, i.e., as-manufactured > conditioned > worn > debris. The flowsheet includes the effect …

Scalable And Adaptive Agile Framework For Semiconductor Foundry: Advanced Packaging And Heterogeneous Integration Perspective, Pravin Thorat

Harrisburg University Dissertations and Theses

This research addressed the critical requirement for a scalable and adaptive agile framework specifically designed for the unique demands of semiconductor foundries specializing in advanced packaging and heterogeneous integration (HI). The semiconductor industry was encountering growing pressure to innovate and respond quickly to rapidly evolving demands, yet traditional manufacturing processes often struggled to adapt. Existing agile frameworks, mainly developed for the software industry, lacked the necessary adaptations to address the complexities of semiconductor manufacturing, including extended lead times, high capital investment, rigorous quality requirements, and the integration of various technologies. This research gap hindered the ability of semiconductor foundries to …

Understanding The Elements Of Sterile Processing Workflow: Or, Sterilization And Personnel, Sayed Rezwanul Islam

All Dissertations

The Sterile Processing Department (SPD), also known as the Central Sterile Services Department (CSSD), is an essential part of hospitals and healthcare facilities and is responsible for ensuring the cleanliness, sterility, and proper functioning of medical instruments. Sterile processing departments (SPDs) are key drivers of productivity, effectiveness, safety, and infection control in hospitals. A well-designed SPD workflow can enhance patient safety, reduce operating room (OR) delays, and improve productivity. To understand the flow of sterile processing and interactions between the OR and SPD, process maps and task analyses were developed through direct observations of the basic SPD functions: decontamination, assembly, …

Advancing Real-World Implementation Of The Well Optimized Linear Finder (Wolf) High-Speed Atmospheric Turbulence Compensation Method, Timothy Evan Coon

Theses and Dissertations

This dissertation advances the real-world implementation of the Well Optimized Linear Finder (WOLF) method for high-speed Atmospheric Turbulence Compensation (ATC). Atmospheric turbulence introduces phase aberrations into optical wavefronts and degrades image quality in terrestrial imaging systems. Traditional phase diversity methods are computationally intensive and poorly suited to real-time operation. The WOLF method addresses these limitations through a novel, point-wise formulation of the optical transfer function (OTF) as a structured autocorrelation of the generalized pupil function (GPF). This formulation enables the estimation of phase aberrations at individual spatial coordinates with distributed computational complexity.

The research begins by developing a MATLAB-based simulation …

A Methodology For Model-Based Certification, Jay Albert Silverman

Engineering Management & Systems Engineering Theses & Dissertations

A need for a single source of knowledge for design decisions has led to the development of a new field of systems engineering, model-based systems engineering (MBSE) (Delligati, 2014). System certification is defined as affirming that regulatory requirements for a system have been met (Goodwin & Juzaitis, 2006). System certification is a specific application of system validation. System verification can be defined as ensuring that the system of interest (SOI), as designed, is in accordance with the design inputs/requirements. System validation can be defined as ensuring that the SOI, as designed, meets the defined system needs (Wolfgand, Katz, & Wheatcraft, …

Systems Statistical Engineering – Hierarchical Fuzzy Constraint Propagation, Hengameh Fakhravar

Engineering Management & Systems Engineering Theses & Dissertations

Driven by the growing need in the 21st century for integrating rigorous statistical analysis into engineering research, there is a movement to develop an integrated statistical engineering science within statistics and quality communities (Hoerl & Snee, 2010; Anderson-Cook et al., 2012). Systems Statistical Engineering research seeks to integrate the Causal Bayesian hierarchical modeling (Pearl, 2009) and cybernetic control theory within Beer’s Viable System Model (1972, 1979, 1985) and the Complex Systems Governance framework (Keating, 2014; Keating & Katina, 2015, 2016) to produce multivariate systemic models for robust dynamic systems mission performance. Cotter & Quigley (2018) set forth the Bayesian systemic …

Complex System Governance And Cyber Operations, Willie Gernard Mccallister

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation examines the potential integration of Complex System Governance (CSG) within cybersecurity, emphasizing the development of a reference model for Cybersecurity Infrastructures. Traditional strategies for securing digital environments have struggled to address the intricate and dynamic layers inherent in modern cybersecurity systems. The purpose of this research is to explore the applicability of CSG as a framework to assess cybersecurity infrastructure using a case study research design. The research addresses two key questions: (1) How can the CSG reference model be adapted to explore cybersecurity infrastructure? (2) What results from CSG based exploration of cybersecurity infrastructure through a case …

Phase Nanoscopy With Correlated Frequency Combs, Xiaobing Zhu

Optical Science and Engineering ETDs

In this dissertation a sensing method applying to any physical quantity that modifies optical phase is developed. Two pulses are produced inside a synchronously pumped Optical Parametric Oscillator, generating two identical, undistinguishable frequency combs. The physical quantity to be measured applies a small phase shift/round trip to one of the pulses, resulting in a frequency shift of the corresponding comb. The latter frequency is measured as a beat by interfering the two combs on a detector. A world record resolution, close to the quantum limit, of 0.033 nanoradian (corresponding to 0.006 fm in displacement) is achieved. A detailed analysis of …

The Design And Effect Of Continuum Robot Compliance On Locomotion, Parsa Molaei

LSU Doctoral Dissertations

Continuum robots, due to their compliant structures and ability to navigate through constrained environments, offer significant advantages in applications requiring safe physical interaction and dexterous motion. However, challenges related to limited structural stiffness, payload capacity, and precise control remain open problems in the field. This dissertation presents novel contributions aimed at addressing these limitations through two main actuation units of continuum robots: tendon-driven continuum robots (TDCRs) and concentric tube robots (CTRs). In the first part, we focus on methods to improve the stability and modify the stiffness of the TDCR. A tendon decoupling strategy is introduced for planar TDCRs. The …

Algorithms For Combined Regular Synthesis Of Controller Parameters In Control Systems For Dynamic Objects, Khusan Zakirovich Igamberdiev, Latafat Abbas Gizi Gardashova, Yulduz Mukhtarkhodjayevna Abdurakhmanova, Uktam Farkhodovich Mamirov

Technical science and innovation

Nonlinear control system that includes m-dimensional input control signal and extended (n+s) - dimensional state vector, the last s components of which form a vector of unknown parameters θ satisfying a general difference equation is being considered. The quality criterion is determined by the loss function. The optimal control must satisfy the Bellman equation with respect to the optimal loss function. To be defined an approximate solution that preserves an active use of information. For this purpose, the system is linearized in accordance to the nominal trajectory. This problem is seen as incorrectly stated. The values of the preliminary data …

Mission Engineering Competencies Workshop Report: Roles, Responsibilities, And Skills, James D. Moreland, Jr. (Editor), Thomas Irwin, Robert-Allen Baker

Center for Mission Engineering (CME) Publications

This report summarizes the findings of a two-day Old Dominion University Mission Engineering Workshop involving the U.S. Navy, U.S. Marine Corps, U.S. Air Force, National Aeronautics and Space Administration, the University of New South Wales, and Old Dominion University, focused on defining the roles, competencies, and skills essential to Mission Engineering. It presents a structured competency framework and offers recommendations to guide workforce development, training, and cross-agency collaboration in support of complex, mission-driven systems.

How’S It Growing? Tools For Observing Snow And Sea Ice In A Changing Arctic Ocean, Ian Alexander Raphael

Dartmouth College Ph.D Dissertations

September Arctic sea ice extent has diminished by roughly 50% in the 45 years since satellite observations began. The Arctic Ocean may experience ice-free summers within the next decade, with implications for habitat, resource extraction, geopolitics, and local and global climate change. To predict how Arctic sea ice will change in the future, we need to understand its behavior in the present. In situ sea ice mass balance measurements (snow accumulation, ice growth, snow and ice surface melt, and bottom melt) are essential for studying the processes driving rapid changes in the ice pack, and for validating remote sensing measurements …

Rotating Scatter Mask System Optimization Study For Determining Optimal Image Recreation, Seth L. Grover

Theses and Dissertations

The Rotating Scatter Mask (RSM) system is a radiation imaging technology currently limited by the mask design and governing identification algorithm parameters. To optimize the RSM design, Dakota—an optimization software—was integrated with a ray tracing code that simulates particle interactions with the RSM detector, and with the Locally Competitive Algorithm (LCA), which reconstructs the source image based on the ray tracing code’s Detector Response Matrix (DRM). Since the original ray tracing code was developed in MATLAB, it was translated into Python to improve compatibility with both Dakota and LCA. The Python version of the ray tracing code was then integrated …

Machine Learning And Optimization For Intelligent Decision-Making, Elson Cibaku

Dissertations

This dissertation presents a series of innovative machine learning and optimization model designs that address complex operational challenges across logistics and power systems. By integrating advanced neural architectures with robust optimization techniques, the work delivers scalable solutions designed to improve efficiency, reliability, and decision-making in dynamic and real-world environments. The first study introduces a two-stage approach to effective vaccine distribution. This framework tackles the capacitated vehicle routing problem by combining adaptive clustering techniques with reinforcement learning and a simulated annealing pickup policy. Through extensive computational experiments, the approach demonstrates substantial improvements in routing efficiency, reducing both computational time and logistical …

Air And Missile Defense Threat Scenario Variation To Reduce Pretest Sensitization, Video Games As A Case Study, Julie Renee Szekerczes

All-Inclusive List of Electronic Theses and Dissertations

This study uses fixed and variable video game types to measure pretest sensitization as a proxy for repeated and varied threat test scenarios in system performance testing of air and missile defense systems. The pretest sensitization phenomenon exists when repeated exposure to a test condition influences the participant's response. Research shows air and missile defense development correlates with video games, resulting in similar interfaces and computer operating environments. Department of Defense acquisition test and evaluation results must reflect system performance without prior knowledge of the threat scenarios confounding the results. System performance results inform acquisition decisions, such as further funding …

Tradespace Exploration With Statistical Modeling Techniques And Immersive Visual Representation In Virtual Environments, Nikhil Raj

All Theses

Statistical modeling techniques combined with virtual reality (VR) visualization offer powerful new approaches to tradespace exploration in engineering design. The research presented addresses the challenge of analyzing and communicating insights from complex multidimensional datasets, particularly for autonomous ground vehicle systems.

Beginning with a review of statistical methods—including Principal Component Analysis (PCA), Analysis of Variance (ANOVA), and correlation analysis—the study examines their applications in tradespace exploration. Building on this foundation, three distinct visualization pathways connecting MATLAB data to virtual environments are developed and evaluated: VRML representation, STL conversion, and Blender integration. Each approach is assessed for its ability to maintain data …

A Causal Model Of Performance Shaping Factors For Human Reliability Analysis In Manufacturing., Prameet Ranjan Jha

Electronic Theses and Dissertations

Human reliability analysis is a critical component of probabilistic risk assessment, aimed at predicting and mitigating human errors in complex systems. This dissertation develops a novel approach to human reliability analysis in manufacturing by integrating structural equation modeling and Bayesian networks to improve the estimation of human error probabilities. Traditional human reliability assessment methods, such as the Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) and the Technique for Human Error Rate Prediction (THERP), provide structured techniques for estimating human error probabilities. However, these methods often fail to capture the complex interdependencies among performance shaping factors (PSFs), limiting their applicability in …

An Msbe–Driven Advanced Air Mobility Post–Disaster Response System, Olabode A. Olanipekun

Graduate Theses and Dissertations (2019 - present)

In this work, an overarching conceptual design model towards the realization of a proposed Advanced Air Mobility Post–Disaster Response System (AAMPDR system) was explored through the focal lenses of systems thinking (ST), socio–technical systems (STS) and model–based systems engineering (MBSE) paradigms. Initially aimed at providing intervention for casualties and aerial support to emergency rescue workers on the ground in the event of a hurricane disaster around the Gulf shore of the Mobile bay area, Mobile city, AL., the scope of this research subsequently expanded to include a global outlook. Thereafter, culminating in the development of a generalized AAMPDR system model …