Systems Engineering Commons^™

Increasing Production Capacity At A Start Up Biomedical Company, Traci J. Otsuji

Industrial and Manufacturing Engineering

The following senior project was first introduced during a summer internship at a biomedical company called Asthmatx Inc. Asthmatx is responsible for the development and manufacturing of a catheter‐based device for moderate to severe cases of asthma. Upon the approval of FDA, Asthmatx had planned to ramp up their production capacity significantly in order to accommodate the potential growth.

The first step in the process improvement was a facility reconfiguration that involved the adjustment of process sequencing and the implementation of ergonomic catheter channels. Next, time studies were conducted to gain more accurate time standards of the production process. After …

Process Improvement For The Department Of Surgery Sierra Vista Medical Center, Jessica Paz

Industrial and Manufacturing Engineering

This report proposes and analyzes process improvement methods for the Surgical Services Department at Sierra Vista Regional Medical Center. The department currently operates with an average of 25% of elective cases starting on time. This can be attributed to a number of inefficiencies that occur throughout the hospital.

The following Industrial Engineering methods were utilized to improve patient flow:  creation of a data collection system to quantify delays  use of simulation and facility redesign techniques to determine feasibility and benefits of moving towards a surgical center model  development of a user interfaced database to record and analyze …

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Ground Support Equipment For Northrop Grumman Massive Heat Transfer Experiment, Michael A. Manuel, Christopher J. Sparber, Greg A. Trent

Aerospace Engineering

California Polytechnic State University students designed, built, and certified ground support equipment for the Northrop Grumman Massive Heat Transfer Experiment. The Cal Poly design team built the 10000, 20000, and 30000 assemblies to meet Northrop Grumman requirements. The requirements included interface limitations, design load factors, delivery, and testing specifications. The design process consists of requirements generation, conceptual design, preliminary design, design reviews, manufacturing, and certification. The hardware was successfully completed and is used at the Johnson Space and Kennedy Space Center.

Polyenvi, Stephen Beard, Josh Engel, Paul Fake, Diego Flores, Alvaro Nunez, Miguel Wong

Electrical Engineering

Poor indoor air quality is a problem that is recognized by the Environmental Protection Agency (EPA) to cause health issues. In order to raise awareness of this problem, this document outlines the construction of a device that economically measures air quality through five metrics: dust, smoke, ozone, humidity, and temperature. The device integrates with a router to provide users access to information about their indoor air quality anywhere over the internet as well as local access to the data via an LCD mounted on the router. By increasing indoor air quality awareness, this device will aid users in making adjustments …

Cable Time Estimation Database, Joshua L. Okerman

Industrial and Manufacturing Engineering

The use of time standards are the basis for a high efficiency system in the manufacturing environment. This project will investigate the process followed to design and develop a database used to calculate accurate cable assembly time standards used for scheduling at General Atomics. This project will then justify the use of the Cable Time Estimation Database, through an economic analysis compared to the current methods applied.

A Decision Making Construct For Complex Situations, Van Edward Brewer

Engineering Management & Systems Engineering Theses & Dissertations

The uncertainty inherently associated with complexity challenges decision-making processes, indicating a need for a construct for decision making in complex situations. A review of the literature on systems, complexity, and paradigms indicates that such a construct must be internally consistent with well-defined philosophical foundations and further that systems and complexity (as used in complex situations) are not necessarily internally consistent with traditional philosophical foundations. Therefore, a decision making construct for complex situations requires research into different foundations. This research addresses these gaps, deriving axiological and methodological components based on a set of principles consistent with the ontology and epistemology of …

Utilizing Knowledge Transfer To Promote Management Of Countervailing Risks In Value Stream Analysis, Jeffery A. Temple

Engineering Management & Systems Engineering Theses & Dissertations

Organizations are frequently faced with the challenges of modifying and streamlining their processes by utilizing the latest process improvement techniques such as Lean Thinking. They use these techniques to allow them to better perform their organizational purposes through the elimination of waste and non-value added steps. Personnel performing these modifications need to account for potential outcomes and risks when streamlining processes. An association of knowledge transfer and experience to the identification and handling of these countervailing or alternative risks when performing Lean Thinking value stream analysis is investigated. The elements of risk management, Lean Thinking and knowledge transfer are described. …

Towards A Formal Theory Of Interoperability, Saikou Y. Diallo

Computational Modeling & Simulation Engineering Theses & Dissertations

This dissertation proposes a formal theory of interoperability that explains 1) what interoperability is as opposed to how it works, 2) how to tell whether two or more systems can interoperate and 3) how to identify whether systems are interoperating or merely exchanging bits and bytes. The research provides a formal model of data in M&S that captures all possible representations of a real or imagined thing and distinguishes between existential dependencies and transformational dependencies. Existential dependencies capture the relationships within a model while transformational dependencies capture the relationships between interactions with a model. These definitions are used to formally …

Towards A Theory Of Understanding Within Problem Situations, Jose J. Padilla

Engineering Management & Systems Engineering Theses & Dissertations

The concept of understanding is ambiguously used across areas of study, such as philosophy and cognitive sciences. This ambiguity partly originates from understanding's generally accepted definition of 'grasping' of something. Further, the concept is confounded with concurrent processes such as learning and decision making. This dissertation provides a general theory of understanding (GTU) that explains the concept of understanding unambiguously and separated from concurrent processes.

The GTU distinguishes between the process of understanding and its outcomes. Understanding, defined as a process, is the matching of knowledge, worldview, and problem. The outcome of this process is the assignment of a truth …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Funeral Services Marketing Interface To Enhance Customer Service And Overall Productivity, Alyssa R. Habing

Industrial and Manufacturing Engineering

Customer satisfaction is the ultimate goal of any business regardless of the industry it resides in; it’s the sole driver of a company’s productivity levels and overall success within the market. Although numb to most market fluctuations, the funeral industry needs to reinvent their business strategies continuously in order to increase their market share. It’s especially important for smaller funeral homes across the world to take this idea to another level in order to stay competitive with the larger, corporate establishments. In the past twenty years, the industry has grown exponentially due to more interest and popularity. The increase in …

Nonprofit Management Through Effective Database Utilization, Jennifer Muscat

Industrial and Manufacturing Engineering

This project addresses problems found within a specific department within Lifewater International. Lifewater faces many unique challenges operating as a nonprofit. Like most nonprofits, elaborate costly solutions are simply not an option when solving department problems. This project addresses three interrelated problems within Lifewater’s Development and Communications Department. The three issues addressed are Volunteer Management, Donor Management, and Project Management. Each problem was examined to determine the areas for improvement that this project can handle and solve. Each problem was given an improved design. A Volunteer Management System was designed to increase volunteer utilization and appropriately match volunteers with appropriate …

Software Test Automation, Phillip Laplante, Fevzi Belli, Jerry Gao, Greg Kapfhammer, Keith Miller, W. Wong, Dianxiang Xu

Education Sciences and Professional Programs Faculty Works

No abstract provided.

Layout And Procedure Re-Design Of Dcpp Receiving Warehouse, Nicole Elizabeth Riegel

Industrial and Manufacturing Engineering

The receiving warehouse at Diablo Canyon Power Plant, owned by Pacific Gas and Electric, serves as a place to recognize the receiving of items into an ERP system, repackage and label items for long-term storage, and organize items for delivery inside the secured area. The warehouse managers would like to redesign the layout and procedures of the warehouse. Currently items are not received, scanned, or shipped in a timely manner. The flow of people and items in the receiving and shipping area is chaotic and space is limited especially during plant outages. The objective of this project is to: • …

Ernie Ball Guitars Woodshop Facilities Redesign, Cameron Lea Schlemer

Industrial and Manufacturing Engineering

This report details a facilities design for Ernie Ball’s guitar and bass guitar manufacturing facility in San Luis Obispo, CA. Specifically, this project will redesign the layout for the Woodshop, the largest of the 5 manufacturing cells in the facility. This project was completed using the Systematic Layout Planning procedure and focused mostly on phase II and III in which the specifics for a layout are determined, however, space requirements were not evaluated as it was not within scope.

The first step was to develop departments in the facilities; two master departments were identified for the neck manufacturing process and …

Non-Profit Management System For Friends Of The Elephant Seal, Matthew Justus, Robert Macasi, Jeff Zinn

Industrial and Manufacturing Engineering

Friends of the Elephant Seal (FES) are a non-profit organization based in San Simeon, California. Their current method of tracking and reporting information is inefficient. A project was proposed to develop a new information management system for FES, install it at their office and provide training including a user manual. The project was divided into three parts: Database Design and Implementation; User Interface Design and Ergonomics; and User Manual & Help System.

The objective of the project was to design a user-friendly interface specifically for the FES worker that allowed for easy access to data entry functions, reporting functions and …

Design For Manufacturing Of Sports Equipment, Cedrick Bit, Christopher L. Head

Industrial and Manufacturing Engineering

The purpose of this project was to validate industrial designs for a product in its conceptual stage and suggest/implement design changes that suit the contracting company’s needs while assuring the product maintains its basic functional requirements. Techniques and methods used to validate the design include 3‐D solid modeling, physical product application using rapid prototyping to produce the product. Methods of design for manufacturing were analyzed in the design. Processes used in the validation and verification of the design include solid modeling design, methods of measurements, fixture design and manufacturing processes. Full design specifications and solid model files were finalized and …

Digester Selection And Operation For Heybeli Island, Spencer Fackler, Joseph Violetti

Industrial and Manufacturing Engineering

The Heybeli Digester project originated with Sema Alptekin in her personal research and was incorporated into a Senior Project opportunity at California Polytechnic State University, San Luis Obispo. The aim of this project was to select and design a plan for the use of a digester for the island of Heybeli, Turkey. The objective of this plan was to incorporate economic, social, and environmental justifications to evaluate if a digester would be a benefit to the community.

Systems Engineering analysis is a vital tool when working with complicated projects that include multiple systems interfacing with one another. Through the use …

Determining A Reliability Factor For Photovoltaic's In San Luis Obispo, Ryan S. Roach

Industrial and Manufacturing Engineering

This project will analyze raw photovoltaic (PV) solar panel performance data in order to determine a reliability factor for solar panels in San Luis Obispo. This project is a subset of a larger project being performed by SLO RESCO, which is funded by a grant from the California Energy Commission. Their project will explore the use of solar, wind, geothermal, and biomass renewable resources. The scope of this project is limited to a small section of RESCO's analysis of solar panel technology and implementation in which a reliability factor will be generated.

The objective is to determine a reliability factor …

Application Of Radio Frequency Identification To An Asset Checkout System, Ma'ayan K. Bennaim

Industrial and Manufacturing Engineering

Radio Frequency Identification (RFID) is a growing technology which is increasingly utilized throughout industry. This senior project identifies an RFID alternative to the checkout system in the tool crib of the Cal Poly Aero Hanger. A new database is designed and built to interface with an RFIDeas AIR enroll reader. The system realizes vast time savings in check in times and increases student accountability for the tools which are checked out by tagging tools.

Visual Representations Of Queried Database Results Using Google's Mapping Technologies, Steven Michael Kilbert

Industrial and Manufacturing Engineering

Database queries have been used in business applications throughout the world to filter out specific information which is often used as a basis for making a decision. Despite the broad use of queries, there are only a limited number of ways to represent results, the most common being a dynaset, or results table. This paper describes the investigation of methods to create more visual representations of results using maps to show queried geospatial data. From these methods, applications were successfully developed to create customized maps in Google Earth and Google Maps based on queried geographical data from Microsoft Access databases. …

A Hybrid Problem-Based And Just-In-Time Inductive Teaching Method For Failure Analysis Instruction, Ryan Michael Arlitt

Masters Theses

"When engineers retire, they take their expert knowledge with them. Preservation of this expert knowledge in a usable form is beneficial for the advancement of any engineering field. Risk in Early Design (RED) is one method for preserving expert risk analysis knowledge. The first purpose of this paper is to examine the usability of RED when incorporated with a hybrid problem-based and just-in-time inductive teaching method for failure analysis instruction. The second purpose of this paper is to propose and perform steps toward verification and validation of the RED methodology and implementation. Evaluation metrics were developed, and several of these …

Risk And System-Of-Systems: Toward A Unified Concept, C. Ariel Pinto, Michael K. Mcshane, Rani Kady

Engineering Management & Systems Engineering Faculty Publications

The scope of this paper is the survey of both fundamental and most recent publications in system-of-systems, business and insurance, as well as risk analysis, modeling, and management for the purpose of better describing the concept of risk in recognition of emergence and complexity which characterizes many systems within the concern of engineering and business managers. The ultimate goal is to provide engineering and business managers the necessary perspective on the concept of risk and in its management for the next generation of sustainable systems - including various descriptions of risk and discussion of the relevance of properties of system-of-systems …

Goal Approach To Risk Scenario Identification In Systems Development, Cesar Ariel Pinto, Andreas Tolk, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

The scope of this paper is the exploration of fundamental issues in identifying risk scenarios during systems development. Systems development refers to a series of processes which span conceptualization, designing the architecture, obtaining the elements, and eventually integrating all these elements into the fully developed final system. For truly sustainable and green systems, identifying risk scenarios early and continuously over the system development processes is vital. This paper contains various descriptions of risk from the project (i.e. programmatic) and technical perspectives, an exploration of the generally accepted risk management process, and how these relate to systems development through system goals. …

T-6a Texan Ii Systems Engineering Case Study, Air Force Center For Systems Engineering, Bill Kinzig, Dave Bailey

AFIT Documents

No abstract provided.

Towards A Center For Modeling And Simulation: The Case For Jordan, Ghaith Rabadi, Hazem Kaylani, Joseph Barjis (Ed.), Murali Mohan Narasipuram (Ed.), Ghaith Rabadi (Ed.), Jolita Ralyt (Ed.), Pierluigi Plebani (Ed.)

Engineering Management & Systems Engineering Faculty Publications

Modeling and Simulation (M&S) has recently become an important area that is pursued by many researchers and practitioners due to the role it plays in understanding complex systems and problems. We have therefore witnessed the establishment of many M&S organizations in the last two decades especially in the more developed world. Less developed countries are starting to recognize the need for such capability especially that the problems they face are not less complex. In this paper, we present a preliminary study towards a business plan for establishing a scientific center for Modeling, Analysis, Simulation and Animation in Jordan (JoSAMA) and …

Development Of A Framework To Evaluate Human Risk Towards Sustainable Risk Management, Ra'ed M. Jaradat, Rani A. Kady, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

Risk managers are constantly faced with the challenge of making decisions at various levels of their organizations. One of the challenges, which often times is unavoidable, lies in assigning a monetary value to human risks. Such challenge necessitates engineering managers to make educated decisions on the level of risk that the organizations and businesses should accept when it comes to human. The purpose of this study is to suggest a suitable framework that captures this aspect of engineering Risk Management in order to make rational and sustainable decisions about such assessed risk. This will be accomplished by exploring the tools, …

Development Of A Contingency Capillary Wastewater Management Device, Evan A. Thomas

Mechanical and Materials Engineering Faculty Publications and Presentations

The personal body-attached liquid liquidator (PBALL) is conceived as a passive, capillary-driven, contingency wastewater disposal device. In this contingency scenario, the airflow system on the NASA crew exploration vehicle is assumed to have failed, leaving only passive hardware and vacuum vent to dispose of wastewater. To meet these needs, the PBALL was conceived to rely on capillary action and urine wetting conditions from 0° < θadv ∼ 90°, be adaptable for both male and female use, collect and retain up to 1 L of urine, minimize splash-back, and allow continuous draining of the wastewater to vacuum while minimizing cabin air loss. A subscale PBALL test article, which was tested on NASA's reduced-gravity aircraft in April 2010, successfully demonstrated key components of this design.

Detection Of Explosive Threats By Using Embedded Wireless Sensor Based Networks, Jake Daniel Hertenstein

Masters Theses

"This thesis focuses on the development of novel schemes for the detection of unintended electromagnetic emissions (UEE) from passive radio frequency (RF) receivers and chemical and biological (CB) agents for the purpose of locating explosive threats (ET) to improve survivability for equipment and personnel in the surrounding environment. The methods and architectures used in this work were developed for use with wireless sensor networks (WSNs). While previous work has shown that highly sensitive equipment is capable of long-range detection of UEE the intention of this work is to develop a network of small, low cost smart sensor nodes (SSNs) capable …