Ergonomics Commons^™

Hardy Diagnostics Facility Redesign, Jamie W. Lam

Industrial and Manufacturing Engineering

This senior project is a facilities design for the plate production room at Hardy Diagnostics. This project was completed using a systematic layout planning approach. The main reason for this redesign was to consolidate all plate line production into one room. This would ensure better visability for the managers. After the project was defined, the different departments were established and the relationships between those departments were found. The space requirements needed for those departments were then measured out to also include the aisle widths and any machinery or carts needed to complete each function. Having determined all requirements for this …

Design Of Assembly Lines With The Concurrent Consideration Of Productivity And Upper Extremity Musculoskeletal Disorders Using Linear Models, Zhan Xu

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The productivity of assembly lines is considerably affected by the health condition of assembly workers, and work-related musculoskeletal disorders (WMSDs) are common occupational diseases among assembly workers due to repetitive motions or heavy working loads. The conventional approaches to decreasing WMSD risks in the assembly lines include slowing the work-pace or applying job rotations. These adjustments usually focus on individual assembly workers at the station level but not the work allocation among the workers at the whole assembly line level, and thus may decrease the line productivity. To avoid these negative effects, some research started considering ergonomic characteristics at the …

Ergonomic Methods To Improve Safety In The Construction Sector And Reduce Costs, Mona Barjasteh

Industrial and Manufacturing Engineering

Many small construction companies have difficulty providing a safe working environment for their employees because of their lack of resources. There is a need to provide a manual for small construction companies employing 10 or fewer workers with the best ergonomic solutions of the top most common injuries. Accidents in the construction field are very high with nearly 175,00o nonfatal injuries and 1,121 deaths in 2002. The nonfatal cases occur 7.1 times per 100 full time workers, while serious injuries occur 2.8 times per 100 full time workers. This information reveled the importance of focusing on minor injuries in order …

Assessing Living Arrangements In Residential Halls, Romel Penaflor Auza

Industrial and Manufacturing Engineering

Hundreds of thousands of high school graduates head off to college each fall not knowing the environment they'll be living in for the next four years. The factors that predict success in the academic, social, and personal aspect of these freshmen students' lives revolves around one aspect that is often times overlooked. Freshmen students are subjected to the fast paced lifestyle of college and often times they need to feel “at home”. Their personal space becomes a matter that is important to them in relation to their success in the three aspects of academic success, social integration, and personal health. …

The Use Of Factor Analysis In The Development Of Hand Sizes For Glove Design, Trevor M. Mclain

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Factor analysis was used to develop a more detailed description of the human hand to be used in the creation of glove sizes; currently gloves sizes are small, medium, and large. The created glove sizes provide glove designers with the ability to create a glove design that can provide fit to the majority of hand variations in both the male and female populations. The research used the American National Survey (ANSUR) data that was collected in 1988. This data contains eighty-six length, width, height, and circumference measurements of the human hand for one thousand male subjects and thirteen hundred female …

Recycling Made Easy: An Ergonomic Approach To Home Recycling And Trash Containers, Landon P. Boisclair

Industrial and Manufacturing Engineering

The purpose of this project is to create an ergonomically sound recycling/trash container, with the ultimate hope of making the recycling process easier and more intuitive, thereby increasing recycling rates. Currently, while there are many recycling/trash containers available for purchase, there is no product that has a design without glaring ergonomic flaws. An ergonomic design and product prototype was created as a part of this project, and was subsequently tested against a conventional prototype model. The data collected from the experiments conducted suggests that the new ergonomic model makes the waste disposal process and the container transportation process easier, while …

Design, Reconstruction And Evaluation Of A Dynamometer For Quarter Scale, Samuel Sanchez

BioResource and Agricultural Engineering

This project discusses the design, reconstruction, and evaluation of a dynamometer. A new test stand for the Quarter Scale team would improve the testing of the engines and the Continuously Variable Transmission (CVT). All the readings will be done electronically in order to provide the most accurate data collection. The dynamometer will be a closed hydraulic system for ease of use. This system will be able to test all of Quarter Scale engines. The data collected will be used to determine which engines are in the best condition, and which may need to be fixed. With the new design, the …

Abatteuses Forestières : Dispositif Et Circuits De Commande Relatifs À La Sécurité, Laurent Giraud, Yuvin Chinniah, Damien Burlet-Vienney, Joseph-Jean Paques, Marina Koutchouk, Renaud Daigle

Rapports de recherche scientifique

Les abatteuses forestières sont des engins tout-terrains conçus pour évoluer en forêt, qui servent de véhicule moteur pour déplacer une tête d’abattage.

L’utilisation d’abatteuses avec une tête d’abattage multifonctionnelle s’est largement répandue au Québec ces dernières années pour deux raisons :

• Cette méthode d’abattage réduit la machinerie car une seule machine tronçonne et façonne les arbres en billots, là où il en fallait plusieurs avec les anciennes méthodes;
• La méthode d’abattage abîme moins le sol de la forêt car le façonnage des arbres se fait sur place et crée ainsi un tapis végétal.

L’IRSST a lancé une série d’études sur …

Ergonomic Analysis Of A Hair Salon, Joseph Keebler, David Schuster, Scott Ososky

Publications

Cosmetology involves a number of diverse tasks that have been implicated in cumulative trauma disorders and in other workplace injuries. This case study presents an analysis of injury risk and prevalence in a salon. Individual, occupational, and organizational factors are considered, and potential areas where risk can be reduced are presented.

The Effect Of Camera Placement And Display Configuration On A Remote Manipulation Task, Debra Clark

Master's Theses - Daytona Beach

A remote manipulation task was presented to 80 Introduction to Psychology students from Embry-Riddle Aeronautical University. The participants viewed the task via two displays showing two camera views. For the camera views, one camera was always in a top-down position, while the other camera changed positions from normal, right-side, reverse, and left-side positions. For the displays, the camera views were shown in either Configuration 1, with the top-down view on the left display and the other camera view on the right display, or Configuration 2, with the top-down view on the right display and the other camera views on the …

Study On Human Elements In The Application Of Automatic Identification System (Ais), Xilei Lu

World Maritime University Dissertations

No abstract provided.

Effect Of Sound Cue Frequency Filters On Front/Back Localization Performance For Three-Dimensional Verbal And Non-Verbal Warnings, Angelica A. Hernandez

Master's Theses - Daytona Beach

In aviation, as technology becomes more advanced and more demands are placed on the human operator, warnings have become an important part of display design. Although warnings have made a significant contribution to safety, problems still plague their design. Recent technological advances have been able to give sounds and warnings a three-dimensional quality (3D). This technology enables a person to perceive sound from any direction around the listener without having the sound physically come from that direction. Three-dimensional sounds have been shown to improve target acquisition and collision avoidance in flight (Oving & Bronkhorst, 1999), and may have other future …

The Effect Of Level Of Automation And Operator-To-Vehicle Ratio On Operator Workload And Performance In Future Uav Systems, Ryan J. Wasson

Master's Theses - Daytona Beach

The military intends to increase the number of UAVs in service while at the same time reducing the number of operators (Dixon, Wickens & Chang; 2004). To meet this demand, many of the current UAV operator functions will need to be automated. How automation is applied to modern systems is not fixed. Levels of automation exist along a continuum from fully manual to fully automatic. Two proposed levels of automation for future UAV systems are Management by Consent (MBC), where the operator selects the task to be executed, and Management by Exception (MBE), where the computer selects the task to …

A Study Of Fidelity Level And Task/Non-Task Based Testing Scenarios On The Effectiveness Of Usability Testing, Joshua R. Dolecal

Master's Theses - Daytona Beach

Advances in usability are directing developers towards creating a better and all around friendlier environment for users. Unlike when buying a physical product where you purchase it first and then experience its usability, web site usability is immediately present. So, if a site doesn't meet our needs, we as users, are quick to look elsewhere. Some research has suggested that fidelity makes no significant impact on users' ability to locate errors or problems in a web site. This paper is intends to investigate the interaction between fidelity and task vs. non-task user testing with regards to the types of problems …

An Analysis Of The Effects That Several Design Variables Have On The Accuracy And Precision Of Glass’ Delta And Hedges’ G, Joshua N. Dryer

Master's Theses - Daytona Beach

Effect size is the standardized effect that some treatment has on a sample of a population. In particular, Hedges' g and Glass delta are mean difference effect size estimators that are used to compute the effect sizes found in an experimental situation. A confidence interval is an interval placed around a point estimate that indicates the precision with which the point estimate can be made. This paper provides an explanation of the concept of effect size estimation and confidence interval calculation, the different methods that can be used to calculate effect sizes and confidence intervals, and applies these methods in …

How Many Slides? Documented Cytotechnologist Workload, Sophie K, Thompson, Eileen Mason

School of Medical Diagnostics & Translational Sciences Publications

(First paragraph) This paper relays workload information obtained as part of an ergonomics survey.1 Data were obtained on the number of slides evaluated daily, workplace setting, hours worked, and demographic information.

Variations In Control And Display Gain In A First Control Order Compensatory Manual Tracking Task, Micah N. Morris

Master's Theses - Daytona Beach

There exist many factors that contribute to the optimal manual control of a system by a human operator (HO). Two such variables include control gain and display gain. Of particular interest to the following experiment is the contribution of these two variables to the manual tracking performance of any HO conducting a compensatory tracking task while using a first control-order tracking system. Since the optimal level of control gain required for maximal manual control of a tracking device is system dependent, it may be expected that the same holds true of display gain. Regardless, it is the purpose of the …

The Search For The Opto-Kinetic Cervical Reflex And Reduced Roll Reversals In Pilots Viewing A 3-D Perspective Display, John Carl Faust

Master's Theses - Daytona Beach

Pilots using conventional instrumentation can suffer spatial disorientation (SD) when unexpectedly forced to transition from visual flight to instrument flight during roll maneuvers. This simulator study was conducted to see if a 3-D perspective display could prevent this form of spatial disorientation by eliciting the opto-kinetic cervical reflex (OKCR), an instinctive postural response that humans use to maintain awareness of their spatial orientation. The current research found evidence of the OKCR in pilots viewing both a 3-D perspective display and an electronic attitude indicator. Pilots viewing a standard moving-horizon attitude indicator produced little or no OKCR response. However, pilots still …

Copious Electronic Text On Small Screen Interfaces: A New Method Of Displaying Text On Cell Phones, William Fitzpatrick

Master's Theses - Daytona Beach

A modified form of RSVP (rapid serial visual presentation) was presented to 15 male and 15 female undergraduate and graduate students from Embry-Riddle Aeronautical University. The participants read 9 short passages electronically presented as 2, 4, or 6 lines of text in rapid sequence on a simulated cell phone display interface, at three speeds. Comprehension of text passages was examined in an attempt to find an ideal method of presenting lengthy text on a small screen interface. The results indicated that as participants were exposed to greater speeds and an increasing number of lines their comprehension of the passages decreased. …

An Experimental Investigation Of The Differences In Subjective Pilot Workload Across Simulated And Real Flight Conditions, Todd V. Denning

Master's Theses - Daytona Beach

An investigation was undertaken to determine the difference in workload between simulated and real flight conditions. The results from the Modified Cooper-Harper and NASA-TLX did not show significance, however, the theoretical implications from the NASA-TLX subscales were of interest. As this is the first study comparing these two environments utilizing subjective workload measures, more research needs to take place in order to provide reliable and valid findings.

Auditory Stimulation And Its Effect On Spatial Temporal Ability, Cynthia G. Edwards

Master's Theses - Daytona Beach

This thesis was designed to detect the type of spatial ability most effected by auditory stimulation, as described in the Mozart effect. Previous research has shown enhancement of performance on the paper-folding and cutting subtest of the Stanford-Binet Intelligence Scale IV with failures to replicate in research using other measures. Seventy-five college students enrolled in introductory psychology classes were exposed to one of three types of auditory stimulation, followed by two measures of spatial ability. The Purdue Visualization of Developments test correlates with tests of spatial orientation and require analytical processing, while the Vandenberg and Kuse Mental Rotation Test is …

The Type And Nature Of Ergonomic Programs In Iowa Manufacturing, Gary Holland

Graduate Research Papers

The purpose of this research is to analyze the relationship of the different types of ergonomic programs according to company employment size.

The Effect Of Cockpit Noise On Aircraft Pilot Psychomotor Performance, Kelechi (Kc) Nwabeke

Master's Theses - Daytona Beach

The purpose of this study was to evaluate the effect of cockpit noise on aircraft pilot psychomotor performance on a simulated tracking task. The performance of thirty-two participants was measured on a vertical and horizontal tracking task. In the control group, eight participants were used in a quiet condition. In the experimental group, eight participants were exposed to low intensity cockpit noise (50 dBA), eight participants were exposed to medium intensity cockpit noise (60 dBA) and eight participants were expose to high intensity cockpit noise (70 dBA). The performance of the control and experimental groups was measured in an advanced …

Effects Of Handedness On Completion Time During Performance Of Multiple Tasks Using “Proper” And “Improper” Tools, Lisnnette M. Nieves Suarez

Master's Theses - Daytona Beach

Handedness is a very critical factor involving single or multiple tasks that are designed for a specific hand. The purpose of this research was to investigate the effect of proper tool design. This research identified the dominant hand and measured task completion time between each of two tasks, 1) the use of left and right-handed scissors using the right hand, and 2) Mouse Manipulation Task using the calculator provided by the computer with a left and right-handed mouse using the right hand. Annett’s (1995) 12-item questionnaire was used to identify the preferred hand. This questionnaire consisted of having the participants …

The Effects Of Sound Cue Characteristics On Overcoming Front/Back Localization Errors In A 3-D Auditory Display, Robert J. Ehmann

Master's Theses - Daytona Beach

The purpose of this study was to investigate the performance effects of adding an additional sound cue characteristic to a 3-D auditory display sound stimulus to increase localization accuracy. Previous literature has provided evidence that localization accuracy for direct front and direct back regions is significantly worse than that of locations in the periphery for virtual 3-D auditory stimuli. In the study conducted, a highpass filter addition or a lowpass filter addition was compared to a "normal" condition for both the front and back locations. Results of the study showed that the best localization performance for the front location occurred …

Fulfilling The Bargain: How The Science Of Ergonomics Can Inform The Laws Of Workers’ Compensation, Jason M. Solomon

Faculty Publications

In the last decade, cumulative trauma disorders have become a significant percentage of reported workplace injuries and litigated workers'compensation claims. Arising from the accumulated impact of daily work activities on the body, these injuries do not fall neatly within "disease" categories which comprise workers' compensation laws. As a result, courts and legislatures have struggled to properly evaluate workers' compensation claims for these injuries. This Note looks at the legal treatment of cumulative trauma injuries in light of the "original bargain" of workers' compensation, where workers give up a tort remedy against their employers in exchange for guaranteed, but limited, compensation …

An Analysis Of The Influence Of Age And Ionizing Radiation On Cognitive Performance, Elizabeth L. Gerhardt

Master's Theses - Daytona Beach

This thesis was designed to study whether age has a significant effect on cognitive test results among persons exposed to ionizing radiation. The data for this investigation came from the fourth year of a 1995-98 longitudinal study of subjects exposed to radiation from the 1986 Chernobyl, Ukraine, nuclear power plant accident. Accuracy and efficiency scores from four cognitive tests taken by 84 Ukrainian volunteers were divided into two age groups and three radiation dosage groups for analysis. The results of this study found that decrements in human performance on tasks involving spatial processing increase with age in persons who have …

General Aviation Aircraft: A Comparative Analysis Of Analog Instrument Display And Conceptual Primary Flight Display, Ungul Laptaned

Master's Theses - Daytona Beach

The primary purpose of this study was to evaluate the effects that analog instrument display versus primary flight display (PFD) had on pilot performance. Pilot performance was evaluated by: (a) time, and (b) number of errors. There were twenty subjects with a minimum of a private pilot license selected from the Aeronautical Science department at Embry-Riddle Aeronautical University. Three flight conditions (spoiler problem, engine problem, and flap failure) acting as a control group was given to the flight students while flying a traffic pattern. A Silicon Graphics® flight simulation software program and a video camera were used as the data …

The Impact Of The Simulated Digital Data Radio Communication Induced Interference On Voice Radio Communication, Daniela T. Kratchounova

Master's Theses - Daytona Beach

The transition of air/ground communications, from its present analog structure to a new digital communications architecture, will span a 10-year time frame. Testing to date indicates that the potential for interference from the digital system to the analog system would be critical, especially for General Aviation (GA) aircraft. This type of interference can be described as short, random bursts of noise capable of completely obliterating parts of the voice communication. The subsequent degrading effects on voice radio communications could jeopardize flight safety. The masking of parts of important information would result in distracted attention, debilitated cognitive performance, high level of …

Numeric Keyboard Layouts: An Ergonomic Approach, Tricia S. Lowe

Master's Theses - Daytona Beach

This study investigated the most effective method of numeric data entry, by means of a numeric keypad. The methods of numeric data entry were (a) two keypads with different numerical configurations, (b) two keypads with identical numerical configurations, and (c) one keypad with only a single numerical configuration. The two configurations utilized were the telephone and the calculator. An experimental design, with focus on the post-test only control group, was utilized. Sixty randomly selected students from the population attending Embry-Riddle Aeronautical University were assigned to five experimental groups.

The results indicated no significant differences: (a) for the number of errors …