Ergonomics Commons^™

Impact Of Sustainable Product Design On Elderly Ergonomics, Tris Kee, Alex King

Faculty of Design & Environment (THEi)

No abstract provided.

Effects Of Motion Segment Simulation And Joint Positioning On Spinal Loads In Trunk Musculoskeletal Models, F. Ghezelbash, A. H. Eskandari, A. Shirazi-Adl, N. Arjmand, Z. El Ouaaid, A. Plamondon

Études primaires

Musculoskeletal models represent spinal motion segments by spherical joints/beams with linear/nonlinear properties placed at various locations. We investigated the fidelity of these simplified models (i.e., spherical joints with/without rotational springs and beams considering nonlinear/linear properties) in predicting kinematics of the ligamentous spine in comparison with a detailed finite element (FE) model while considering various anterior-posterior joint placements. Using the simplified models with different joint offsets in a subject-specific musculoskeletal model, we computed local spinal forces during forward flexion and compared results with intradiscal pressure measurements. In comparison to the detailed FE model, linearized beam and spherical joint models failed to …

The Effect Of Task Load, Automation Reliability, And Environment Complexity On Uav Supervisory Control Performance, Sarah M. Sherwood

Doctoral Dissertations and Master's Theses

Over the last decade, military unmanned aerial vehicles (UAVs) have experienced exponential growth and now comprise over 40% of military aircraft. However, since most military UAVs require multiple operators (usually an air vehicle operator, payload operator, and mission commander), the proliferation of UAVs has created a manpower burden within the U.S. military. Fortunately, simultaneous advances in UAV automation have enabled a switch from direct control to supervisory control; future UAV operators will no longer directly control a single UAV subsystem but, rather, will control multiple advanced, highly autonomous UAVs. However, research is needed to better understand operator performance in a …

Ambulatory Clinic Exam Room Design With Respect To Computing Devices: A Laboratory Simulation Study, Dustin T. Weiler, Tyler Satterly, Shakaib U. Rehman, Maury A. Nussbaum, Neale R. Chumbler, Gary M. Fischer, Jason J. Saleem

Faculty and Staff Scholarship

Background—Challenges persist regarding how to integrate computing effectively into the exam room, while maintaining patient-centered care. Purpose—Our objective was to evaluate a new exam room design with respect to the computing layout, which included a wall-mounted monitor for ease of (re)-positioning. Methods—In a lab-based experiment, 28 providers used prototypes of the new and older “legacy” outpatient exam room layouts in a within-subject comparison using simulated patient encounters. We measured efficiency, errors, workload, patient-centeredness (proportion of time the provider was focused on the patient), amount of screen sharing with the patient, workflow integration, and provider situation awareness. Results—There were no statistically …

Evaluation Of A Scientifically Developed Anesthesiology Handoff Protocol, Kristen Lise Welsh Webster

Doctoral Dissertations and Master's Theses

Communication failures have been cited as the leading cause of avoidable adverse events in healthcare. Specifically, within handoffs, these communication failures can cause error in the transfer of patient information. A multitude of factors can affect the transmission of patient information between providers including transactive memory, power distance, and conversational noise; however, literature suggests that the use of handoff protocols assist in improving communication and efficiency during handoffs. Studies regarding handoffs have typically centered on the content or delivery of the information during the handoff. To date, none have targeted the underlying mechanisms of the communication and their effects on …

Determination Of Recovery Time For A Simple Lifting Task Based On Weight, Frequency, And Duration Of The Lift, Milad Amini

LSU Master's Theses

Musculoskeletal disorders (MSDs) are a leading cause of injury in American workplaces which cost the economy billions of dollars each year. Extensive research has shown that job fatigue is one of the causes of MSDs. Allocating frequent and adequate rest break is suggested to be an effective method in mitigating the work overload and fatigue prevention. The objective of this research was to determine rest periods for lifting tasks based on the activity heart rate and by using a set of task variables. Twenty-four university male students took part in this study. The two response variables were perceived level of …

The Effect Of Magnification Loupes On Dental Hygienists' Posture While Exploring, Emily Ludwig, Gayle B. Mccombs, Susan L. Tolle, Daniel M. Russell

Dental Hygiene Faculty Publications

Purpose: The purpose of this study was to determine the effects of dental magnification loupes on posture during instrumentation.

Methods: A convenience sample of 27 right-handed dental hygienists, with no prior history of injuries or disabilities of the head, neck, or trunk region, enrolled in the study. Baseline posture calibration was taken and tri-axial accelerometers were placed on four locations of the head and trunk (occipital region of head; cervical vertebrae C5; thoracic vertebrae T5; lumbar vertebrae L1) to measure acceleration and the orientation of the body to gravity. Participants were randomly assigned to wear self-supplied magnification loupes during either …

An Ergonomics Investigation Of The Application Of Virtual Reality On Training For A Precision Task, Delaney M. Bales

Master's Theses

Virtual reality is rapidly expanding its capabilities and accessibility to consumers. The application of virtual reality in training for precision tasks has been limited to specialized equipment such as a haptic glove or a haptic stylus, but not studied for handheld controllers in consumer-grade systems such as the HTC Vive. A straight-line precision steadiness task was adopted in virtual reality to emulate basic linear movements in industrial operations and disability rehabilitation. This study collected the total time and the error time for the straight-line task in both virtual reality and a physical control experiment for 48 participants. The task was …

The Issues And Complexities Surrounding The Future Of Long Duration Spaceflight, Solomon Miiro

Graduate Student Works

The Comprehensive Exam put forward by this proposal is intended to address the learning objectives covered by the Master of Aeronautical Science Degree with specializations in Aviation Aerospace Safety Systems and some limited aspects in Human Factors in Aviation Systems. This will be accomplished by researching the following topics: effects of long duration spaceflight on crew performance and functioning and the steps that should be taken to enable long term spaceflight mission crews in lieu of accomplishing important missions; a human factor analysis should current human-machine design interfaces be enhanced to make manual rendezvous and docking in space easier to …

Liquid Force Kite Control System Design, Brendan Kerr, Brodie Sutherland, Alden Simmer

Industrial and Manufacturing Engineering

Kiteboarding is an ocean sport wherein the participant, also known as a kiter, uses a large inflatable bow shaped kite to plane across the ocean on a surfboard or wakeboard. The rider is connected to his or her kite via a control bar system. This control system allows the kiter to steer the kite and add or remove power from the kite, in order to change direction and increase or decrease speed. This senior project focused on creating a new control bar system to replace a control bar system manufactured by a kiteboarding company, Liquid Force. The current Liquid Force …

Bio-Mimicry Of A Leopard Tortoise’ Shoulder Girdle In Space Frame Design Of An Ambulance Body, Sarah A. Matiko

Doctoral Dissertations and Master's Theses

It appears that there is a need for affordable, functional and safe emergency medical support service vehicles in rural Sub-Saharan Africa (SSA). It is inferred that the road conditions have an influence on the availability, durability and affordability of motorized and non-motorized vehicles in rural areas. Also, it is deduced that locally modified bicycle and motorcycle ambulances are not conducive to maternal patients during emergencies. This study investigates the feasibility of modelling an ergonomically and crashworthy patient compartment for road conditions in rural SSA. The patient compartment is modelled by establishing geometrical requirements via a design standard for emergency medical …

Chocolate Bar Wrapping Machine, Austin M. Hoff, Daniel R. Trepke, Caleb B. Krichbuam

Williams Honors College, Honors Research Projects

Gilbert Chocolates has proposed to manufacture a machine to wrap chocolate bars. This machine is intended to replace two people wrapping the chocolate bars by hand, which is a time consuming method. This is especially apparent between October and January when the workers are working long hours in preparation for the Christmas rush of customers. Currently wrapping a bar takes about a minute and Gilbert Chocolates wants this time reduced down to 20-30 seconds. The budget for this project is set at $1000, and is being funded by the company. This machine needs to fit in a cubic foot of …

Accuracy And Repeatability Of Single-Pose Calibration Of Inertial Measurement Units For Whole-Body Motion Analysis, Xavier Robert-Lachaine, Hakim Mecheri, Christian Larue, André Plamondon

Études primaires

Portable inertial measurement units (IMUs) are suitable for motion analysis outside the laboratory. However, IMUs depend on the calibration of each body segment to measure human movement. Different calibration approaches have been developed for simplicity of use or similarity to laboratory motion analysis, but they have not been extensively examined. The main objective of the study was to determine the accuracy and repeatability of two common single-pose calibrations (N-pose and T-pose) under different conditions of placement (self-placement and passive placement), as well as their similarity to laboratory analysis based on anatomical landmarks. A further aim of the study was to …

Difference Between Male And Female Workers Lifting The Same Relative Load When Palletizing Boxes, André Plamondon, Christian Larivière, Denys Denis, Hakim Mecheri, Iuliana Nastasia

Études primaires

A few biomechanical studies have contrasted the work techniques of female and male workers during manual material handling (MMH). A recent study showed that female workers differed from males mostly in the strategy they used to lift 15-kg boxes from the ground, especially regarding task duration, knee and back postures and interjoint coordination. However, the lifting technique difference observed in females compared to males was perhaps due to a strength differences. The objective of this study was to test whether female workers would repeat the same lifting technique with a load adjusted to their overall strength (females: 10 kg; males: …

Effect Of Local Magnetic Field Disturbances On Inertial Measurement Units Accuracy, Xavier Robert-Lachaine, Hakim Mecheri, Christian Larue, André Plamondon

Études primaires

Inertial measurement units (IMUs), a practical motion analysis technology for field acquisition, have magnetometers to improve segment orientation estimation. However, sensitivity to magnetic disturbances can affect their accuracy. The objective of this study was to determine the joint angles accuracy of IMUs under different timing of magnetic disturbances of various durations and to evaluate a few correction methods. Kinematics from 12 individuals were obtained simultaneously with an Xsens system where an Optotrak cluster acting as the reference system was affixed to each IMU. A handling task was executed under normal laboratory conditions and imposed magnetic disturbances. Joint angle RMSE was …

Effects Of Early Exposure To Sign Language On The Biomechanics Of Interpreting, Abigail Donner, Matthew Marshall, Jacqueline Mozrall

Journal of Interpretation

Sign language interpreters are routinely exposed to the high physical and cognitive demands inherent to the profession. Unfortunately, many interpreters suffer from musculoskeletal disorders as a result of this exposure. There are a myriad of factors that can contribute to the development of a musculoskeletal disorder, but many of these are not under the control of the interpreter. However, individual technique is something that affects upper extremity biomechanics and is something that an interpreter can regulate. Research with musicians has demonstrated that early exposure to musical technique can lead to the development of a technique that is more biomechanically efficient …

Leveraging Smart Infusion Pump Data For Workflow, Patient Care And Usability Improvement In Human Factors, Yan Ni Ding, Denny Yu, Poching Delaurentis, Kang-Yu Hsu, Joon Hong Kim

The Summer Undergraduate Research Fellowship (SURF) Symposium

Infusion pumps are medical devices that deliver fluids like medication, and nutrients in a precise, timely, and controlled manner that is critical to patient care. It is widely used in clinical settings especially in hospitals, nursing homes and sometimes at home. Smart infusion pumps technology are supposed to be reduce nurses’ workload, but due to the recurring number of alarms which disrupt the workflow of the infusion process, most nurses prefer to use the traditional infusion pumps or work-around the safety features of the smart pumps. Thus, the aim of this research is to leverage Smart Infusion Pump data to …

Impact Of Microscope, Loupes, And Video Displays On Microsurgeons’ Risk For Musculoskeletal Injuries, Yiyu Shi, Denny Yu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microsurgery is commonly performed with operating microscopes or loupes to repair traumatic injuries, damage from cancer surgery, etc.; however, the prolonged, awkward, and constrained postures from using these equipment puts microsurgeons at risk for musculoskeletal pain and injuries. An alternative heads-up displays may improve surgeons’ ergonomics by allowing microsurgeons to perform the procedure in a more comfortable and ergonomic position. The study compares the effect of microscope, loupes and video displays on postures during microsurgical targeting task. This study incorporated three steps to contrast displays. Firstly, 12 participants wearing six reflective markers completed a surgery simulation using all three displays, …

Solar Turbines Compressor Blade Installation Tools, Ryan Bruce, Carolyn Honeycutt, Stephen Oltrogge, Emmett Ross

Mechanical Engineering

The following report documents a California Polytechnic State University, Mechanical Engineering Senior Project sponsored by the gas turbine manufacturer, Solar Turbines. The senior project team consisted of four senior mechanical engineering students at Cal Poly, all with general concentrations; Ryan Bruce, Carolyn Honeycutt, Steve Oltrogge, and Emmett Ross. Kenneth Thomas sponsored the group and serves as the point of contact between the senior project team and Solar Turbines. He is a member of the Solar Turbines Mechanical Design Engineering Team and a Cal Poly graduate. Christoph Maurer served as the project team’s on-campus advisor.

A gas turbine uses internal combustion …

An Ergonomics Analysis Of Redundancy Effect In Touch Screen Design For The Aged Population, Sarah Riesenberg

Master's Theses

Touch screen technology is rapidly increasing, and at the same time there is a shifting, aging population. As the percentage of the population over the age of 65 increases, adults of the age group are adopting smartphones and tablets more now than ever before. Although older adults are adopting touch screen devices, they face many challenges when interacting with said devices, such as not knowing how to navigate between pages, not knowing where to click for an action to occur, and the touch screen interface is often too sensitive or the buttons are not big enough. Furthermore, the challenges of …

How Trust Influences Adoption: Creating Human-Centered Autonomous Vehicles, David R. Garcia

Human Factors and Applied Psychology Student Conference

No abstract provided.

Ergonomics In Space Flight – Past, Present, & Future, Robert Consolo

Human Factors and Applied Psychology Student Conference

From the days of “The Rocket Men” to the uprising of SpaceX, spaceflight has always inspired awe in humanity. If you examine the men that were apart of those first missions, you will find that they were not only the most capable, but won the genetic lottery to become this nations first astronauts. Looking to the times of Mercury, you see the extreme constraints that potential astronaut candidates had to meet in order to go to space. Aside from the rigorous medical testing, potential candidates also had to meet strict height and weight requirements. Early candidates could not be taller …

Creation And Implementation Of An Underwater-Capable Vr Headset Through The Use Of Additive Manufacturing, Matthew D. Meyers, Nathan Sonnenfeld

Human Factors and Applied Psychology Student Conference

No abstract provided.

Designing A Mobile Space Habitat Analog, Victor Kitmanyen, Matthew Burkhard, Timothy Disher

Human Factors and Applied Psychology Student Conference

No abstract provided.

"Smart" Airport App, Jacob A. Collins, Alyssa Williams, Vikrant Neb, Pranav Gupta

Engagement & Service-Learning Summit

We are going to make an app that can be used by people traveling through or from ORD airport (Chicago), which will provide live time update for security check line (in terms of time), change of gate for the flight and whether or not the flight is on time. The reason for developing this application is to simplify and improve the passenger’s overall airport experience in order to make it more enjoyable, informative, and time efficient while decreasing the current negative mentality towards traveling. Resources needed to create the prototype would include softwares that help in creating wireframes of the …

A Biomechanical Comparison Between Expert And Novice Manual Materials Handlers Using A Multi-Joint Emg-Assisted Optimization Musculoskeletal Model Of The Lumbar Spine, Denis Gagnon, André Plamondon, Christian Larivière

Études primaires

Expertise is a key factor modulating the risk of low back disorders (LBD). Through years of practice in the workplace, the typical expert acquires high level specific skills and maintains a clean record of work-related injuries. Ergonomic observations of manual materials handling (MMH) tasks show that expert techniques differ from those of novices, leading to the idea that expert techniques are safer. Biomechanical studies of MMH tasks performed by experts/novices report mixed results for kinematic/kinetic variables, evoking potential internal effect of expertise. In the context of series of box transfers simulated by actual workers, detailed internal loads predicted by a …

Subject-Specific Biomechanics Of Trunk: Musculoskeletal Scaling, Internal Loads And Intradiscal Pressure Estimation, F. Ghezelbash, A. Shirazi-Adl, N. Arjmand, Z. El-Ouaaid, A. Plamondon

Études primaires

Development of a subject-specific computational musculoskeletal trunk model (accounting for age, sex, body weight and body height), estimation of muscle forces and internal loads as well as subsequent validation by comparison with measured intradiscal pressure in various lifting tasks are novel, important and challenging. The objective of the present study is twofold. First, it aims to update and personalize the passive and active structures in an existing musculoskeletal kinematics-driven finite element model. The scaling scheme used an existing imaging database and biomechanical principles to adjust muscle geometries/cross-sectional-areas and passive joint geometry/properties in accordance with subjects’ sex, age, body weight and …

Ergonomic Analysis Of Mobile Cart–Assisted Stocking Activities Using Electromyography, Sohyung Cho

SIUE Faculty Research, Scholarship, and Creative Activity

Workers in grocery stores are exposed to numerous musculoskeletal risks that can be reduced using assistive devices while performing stocking tasks. A regional grocery store has recently deployed a mobile cart without comprehension of its ergonomic impact on workers, which this article investigates using normalized electromyography data (%MVC). This article studies not only ergonomic impact based on %MVC values but also work performance represented by a muscle force metric (MFM). The results from this study showed highest muscle groups in %MVC and MFM were the erector spinae and triceps. Interestingly, muscle activations on erector spinae were reduced when mobile cart …

Ergonomics Analysis Of Touchscreen Utilization As A Function Of Preferred Hand And Gender, Jordan E. Odell

Master's Theses

The growth of touchscreen technology has changed the way users interface with a wide range of computing and communication products and systems. Examples range from personal tablets and laptops to industrial applications such as process control, point-of-sales, and ticketing kiosk systems. An important area of application is the automobile industry which is designing cars with touchscreen control panels to replace the previously designed mechanical knobs and buttons. However, interacting with touchscreens does not provide the same tactile feedback as physical mechanisms, therefore they require more precise movement and visual attention, which distracts the user from the primary task.

The purpose …

Identifying Mode Confusion In Recorded Aircraft Data, James Douglas Thomas, Yul Kwon, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

In recent decades, commercial aviation accidents have occurred due to human-machine interaction (HMI) problems known as “mode confusion.” This is caused, in some cases, by a lack of understanding of onboard systems by pilots. Large amounts of Flight Operational Quality Assurance (FOQA) data are available, analysis of which could assist in identification of safety risks in daily operations. Through analysis of pilot reactions and recorded aircraft data, methods to detect mode confusion are developed to improve aviation safety. This study was conducted by inducing mode confusion into a flight simulation scenario and analyzing aircraft data to detect emerging patterns. Three …