Energy Systems Commons^™

Analysis Of Fluid Flow In Redox Flow Batteries, Erfan Asadipour

McKelvey School of Engineering Graduate Student Theses & Dissertations

Redox flow batteries (RFB) hold great potential for large-scale stationary energy storage. However, their low energy density compared to other energy storage systems must improve for feasibility. Electrolyte flow distribution affects current density distribution and providing a uniform current density distribution is one way to improve RFB performance. Additionally, reducing the power consumption of the electrolytes’ pump as a source of energy loss in RFB systems increases their efficiency. Investigating both subjects requires analysis of the fluid dynamics in RFB cells.

In this thesis, a novel, computationally cost-effective hydraulic-electrical analogous model (HEAM) was developed to study fluid dynamics by implementing …

Nanoscratch Study Of Diamond-Like Carbon Coatings With A Polydopamine + Sio2 Adhesive Underlayer, Anna Fisher

Mechanical Engineering Undergraduate Honors Theses

Diamond-like carbon (DLC) coatings have a wide array of desirable characteristics such as low friction, high hardness, and scratch resistance. Due to high residual stress and thermal mismatch, DLC films experience adhesion difficulties when bonded with metallic substrates, leading to cracking and delamination. In this study, the properties of a new coating with a polydopamine underlayer and silica nanoparticles bonded to a stainless-steel substrate (PDA+SiO2/DLC) were studied alongside three other samples, one with a polydopamine underlayer (PDA/DLC), one with a trimethylsilane (TMS) underlayer (TMS/DLC), and one with no underlayer (DLC only). Nanoscratch tests were performed with a 1 μm spheroconical …

Evaluation And Sizing Of Solar Powered Reverse Osmosis Water Desalination System, Sandip Subedi

Honors Theses

About 71 % of the surface of Earth is water, out of which around 2.5 % is freshwater. The majority of the surface of Earth is occupied by seawater which also contains dissolved salt. The salt concentration in seawater makes it toxic to humans because the human body is unable to get rid of the salt that comes from seawater. The demand for fresh water is increasing due to the rise in global population. In this context, desalinated seawater is considered as a viable resource to meet the growing demand for fresh water. Desalination process is highly energy intensive due …

Feasibility Study Of Portable Solar Powered Blood Storing Refrigerator, Saroj Subedi

Honors Theses

This report is focused on the preliminary feasibility of portable solar-powered blood-storing refrigerators primarily based on calculations of energy required to maintain the temperature of the refrigerator, the electricity required throughout the day, calculating sufficiency of power supplied by the solar panel, and selection of battery for power storage. The method and the trend of a feasibility study involve the study of blood properties, separation of blood components after donation, and their storage conditions. Then, the portable size of the refrigeration has been proposed with three different compartments for storage of each blood component. The further methods involve the selection …

Performance And Economics Of Solar Inverters And Module Level Power Electronics In A 1 Mw Photovoltaic System, Maxwell Criswell

Biological and Agricultural Engineering Undergraduate Honors Theses

Photovoltaic solar panels convert sunlight to electricity in the form of direct current; therefore, a necessary component of every photovoltaic system is an inverter to convert the electricity to usable alternating current. There are various commercially available inverter technologies manufactured today such as microinverters, string inverters, and central inverters, as well as module level power electronic devices such as DC optimizers that are capable of improving system performance in string and central inverter systems. This thesis compares the performance and economics of five different inverter and module level power electronic systems through model simulation using Helioscope software. The five alternatives …

Sizing And Economics Of Solar Powered Indoor Swimming Pool, Aman Bhatta

Honors Theses

With increasing global population and aspiration for higher standards for living, there is a rapid increase in demand for energy. With the concerns of climate change becoming ever more pressing, a shift from the conventional energy source to an alternative green version to meet the energy demand could be of significant interest. A large amount of energy is required to maintain water temperature in the swimming pool at a human comfort temperature. Several studies have been performed to calculate and evaluate the feasibility of powering thermal systems for swimming pools using solar energy. Still, extensive analysis using solar thermal energy …

Parametric Design Of Flywheel For An Electric Punch Press, Prashant Dhakal

Honors Theses

Almost all designs start with a design requirement. These may be weight, volume, clearance, and even custom calculations. Finding a solution that meets these requirements often involves tedious and time-consuming iterations. Once the solution has been found, the design must be optimized to find the best possible solution. Finding the ‘best possible design’ requires substantial time and effort dedicated to iterating and analyzing the potential model solutions. This is where Parametric design comes into play. The Parametric design aids in specifying the key parameters of the design and makes changes interactively, with the model updating automatically. The purpose of this …

Computational Study On Suppression Of Airfoil Flow Separation Using High-Frequency Translational Surface Actuation, Bibek Gupta

Honors Theses

Flow separation is a phenomenon that occurs when pressure increases in the streamwise direction of a flow, making a distinctive boundary layer or separation bubble. It causes aircraft to experience an increase in drag and noise and a decrease in a lift, hence degrading their aviation performance. This study uses numerical simulations to understand better the effects of high-frequency translational surface actuation (HFTSA) on flow separation control. The numerical simulations mimic the experimental parameters of an experiment performed by Okoye et al. on using the HFTSA system to control flow separation. A symmetrical airfoil structure of chord length of 0.3 …

Design Of Smart Trashcan, Haoran Song

Senior Theses

A smart trashcan has been designed which can bring convenience to people for throwing their garbage away during the COVID-19 pandemic. A prototype is made from cardboard to demonstrate its function. This trashcan can sense people who are coming and leaving, and it can open and close automatically. The trashcan is powered by solar energy. A solar panel is mounted on top of the trashcan supporter. This design is specifically for use in China.

Survey Of Unvented Attics In Climate Zone 2a, Florida Solar Energy Center, Eric Martin

FSEC Energy Research Center®

Moisture risk must be managed in unvented attics to ensure durability of components and longevity of the system. The FSEC Energy Research Center (FSEC), at the University of Central Florida tested and collected data in six homes in the northern Florida portion of IECC Climate Zone 2A built after 2015 with unvented (semi-conditioned) attics to add to the body of knowledge on the accumulation of moisture in the attic and its effects on roof moisture that can impact durability.

Relative International Energy Conservation Code (Iecc) Energy Impacts By Compliance Path, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

The EnergyGauge® USA (v.6.2) residential building energy simulation software tool is used to examine energy impacts in two-story, 2,376 ft², single-family homes configured in accordance with the minimum requirements of Section R402-R404 of the 2018 IECC in fourteen representative U.S. cities.⁴ EnergyGauge USA is a RESNET-accredited HERS software tool capable of evaluating not only the HERS Index and the IECC Section R406 Energy Rating Index Compliance Alternative but also the IECC Section R405 Simulated Performance Alternative as well as the IECC Section R402 R-Value and Total UA Alternative prescriptive methods along with all of the IECC mandatory …

Accelerated Controller Tuning For Wind Turbines Under Multiple Hazards, Aly Mousaad Aly, Milad Rezaee

Faculty Publications

During their lifecycle, wind turbines can be subjected to multiple hazard loads, such as high-intensity wind, earthquake, wave, and mechanical unbalance. Excessive vibrations, due to these loads, can have detrimental effects on energy production, structural lifecycle, and the initial cost of wind turbines. Vibration control by various means, such as passive, active, and semi-active control systems provide crucial solutions to these issues. We developed a novel control theory that enables semi-active controller tuning under the complex structural behavior and inherent system nonlinearity. The proposed theory enables the evaluation of semi-active controllers’ performance of multi-degrees-of-freedom systems, without the need for time-consuming …

Smud Solar Regatta, Logan Garby, Nam Le, Jacob Singer, Alejandro Carrera, Laura Casas

Mechanical Engineering

The Sacramento Municipal Utility District (SMUD) hosts the Solar Regatta every year in Rancho Seco, CA, a competition which consists of teams building a solar powered boat to compete in three races: the sprint race, endurance race, and slalom race. The Cal Poly Solar Regatta team was informed mid-project by SMUD that the competition has been canceled once again for spring 2021, but the team decided to move forward with the construction of the boat. The previous Cal Poly team from 2019/2020 designed the hull and propulsion system of the boat. The 2020/2021 team worked with the previous team in …

Improving Vertical Axis Wind Turbine (Vawt) Performance With Placement Strategies: Final Report, Patrick A. Tebbe, Nazli A. Yilmaz Wodzinski, Namyong Lee

Mechanical and Civil Engineering Department Publications

This project was focused on the use and placement of vertical axis wind turbines (VAWTs). Studies were focused on areas not typically addressed in previous work; small wind at very low elevations (i.e. within the boundary layer). Numerical studies were made of how VAWTs function as well as the potential wind environments they may be placed in. A simplified numerical code, based on two-dimensional potential flow functions, was developed to model flow around buildings and other structures. The code allows a rapid determination of regions where flow may experience speed-up and where turbulence may result.

Experimental facilities were designed and …

Resilient Florida Buildings: Alternative Fuel Options For Maintaining Power During Outages, Brochure, Florida Solar Energy Center, Colleen Mccann Kettles

FSEC Energy Research Center®

Electricity outages impact buildings as well as the fueling infrastructure that delivers energy resources for power generation and transportation. A fueling infrastructure with minimal downtime during power outages is needed to increase the resiliency of buildings and the economy. This brochure describes alternative fuels to consider for a buildings resiliency plan. This material is based upon work supported by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) under the Energy Technology Development Program Award Number DE-EE0008880. FSEC Art#: BLDG-89 Updated: 05/20/2021

Metal And Flexible Duct Systems Impacts Upon Cooling Energy And Performance, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

Flexible duct is commonly used throughout the U.S. in residential construction. It performs well when installed in accordance with industry standards, however, they are often not installed as such. Issues such as not cutting ducts to the exact length needed, and instead using significantly more duct, result in compression and higher static pressure. Poorly supported ducts or turns without proper radius also increase static pressure. A research project was completed to evaluate the differences in performance between a metal duct and flexible duct systems in two side-by-side otherwise identical residential laboratories. Testing evaluated three different flex duct system configurations compared …

Nebraska Summary: S1150a Fendt 1050, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Renewable Energy Production By Solar Chimney: The Influence Of Curved Guide Vanes On The Performance Of A Solar Chimney Using Cfd Simulation, Haokun Xue

Theses, Dissertations and Capstones

The aim of this study is to investigate the effect of the guide vanes on the efficiency of the turbine of solar chimney power plant using Computational Fluid Dynamics (CFD). In this study, a 3-Dimentional CFD simulation of solar chimney power plant based on the Manzanares prototype is performed. The CFD simulation is validated by comparing the experimental data from the Manzanares prototype and simulation data with both 2D and 3D cases. To capture turbulent flow inside the chimney, the SST 𝑘 − 𝜔 turbulence model is used. The first object is to investigate the flow performance under the influence …

Nebraska Summary 1218s: Fendt 724 Vario Gen6, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Solar Thermal Dish Storage System Project: A Novel Receiver Experiment Model, Forrest Osborn

Undergraduate Research Posters 2021

Solar energy utilizes sunlight to generate electricity but inefficiencies in energy storage limits this technology. Transferring sunlight into thermal energy can contribute to solve this problem. The goal of this study was to determine feasibility of a heat exchanger to be used with an existing solar parabolic dish. For this purpose, a heat gun was used to measure the thermal properties of a novel receiver design. This system was used to analyze different receiver configurations for a copper tube containing water as a heat transfer fluid. The inlet and outlet water temperatures and the effect of HTF flow rate were …

Test 2235: John Deere 8rt 340, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Harvesting Heat From Safer, Energy-Dense Slow Pyrolant Mixtures For Future Space Missions, Katerina Chagoya

Electronic Theses and Dissertations, 2020-2023

Energy sources powering space missions range from highly energetic nuclear reactions to short-lifetime and low-output batteries. The proper selection of a power system is dependent on the mission duration and destination and oftentimes energy sources that may be optimal for the former may be unsuitable for the latter. Various limitations of these power sources hinder the capacity for regular and frequent space exploration. However, the ability to harvest heat for electrical power generation would allow for long-distance and long-duration missions at a reduced cost. By employing a regulated, self-propagating, exothermic chemical reaction between solid fuel and oxidizer, we hope to …

Kinetics Of Photolysis And Photocatalytic Oxidation Of Ammonium Sulfite For Hydrogen Production, Moustafa A. Soliman, Maryam Zakaria

Chemical Engineering

The production of hydrogen via photocatalytic water splitting is one of the most promising technologies for obtaining chemical energy from direct solar energy while maintaining the least possible waste and pollutants. In this paper, we obtain the kinetic parameters necessary for the design of a photoreactor for photolysis and photocatalysis of ammonium sulfite solution. For the case of photolysis, we obtain the kinetics for the effect of changing the pH on the produced amount of hydrogen. For the case of photocatalysis, the intrinsic kinetic parameters of photocatalysis of water splitting reaction of ammonium sulfite and water in the presence of …

Analysis Of A Solar Hybrid Sulfur Ammonia Copper Oxide Thermochemical Cycle For Hydrogen Production, Moustafa A. Soliman, Abdel Moniem Abomosalam, Noran Shedid, Mohamed Othman, Toka Hatem, Marc Samer

Chemical Engineering

Solar energy conversion to hydrogen by water splitting is a promising technique because it is sustainable and environmentally friendly. One option for water splitting is through thermochemical cycles in which one of the steps is electrolytic or photocatalytic. In this paper, the economics of a thermochemical process that combines photocatalysis, photovoltaics, high temperature thermal energy and energy storage to harvest solar energy is assessed. This paper focuses on the standard hybrid sulfur ammonia thermochemical cycle (SA) in which the electrolytic step of the hydrogen production from ammonium sulfite solution is augmented by a photocatalytic step. Trying to make use of …

Test 2090a: John Deere 7r 230, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2085a: John Deere 7r 250, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2179a: John Deere 7r 210, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1148a Fendt 1042, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1147a Fendt 1038, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1149a Fendt 1046, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …