Energy Systems Commons^™

Experimental Evaluation Of Membranes In The Recovery Of Hydrogen From Serpentinization, Rafael Dos Santos

LSU Master's Theses

Natural hydrogen generated through serpentinization reactions has emerged as a promising low-carbon energy resource. However, serpentinization-derived gas streams commonly contain methane (CH₄) and carbon dioxide (CO₂), requiring purification before hydrogen can be utilized in industrial applications. Membrane-based gas separation technologies offer a potentially cost-effective solution for hydrogen recovery; however, to the best of the author's knowledge, no previous studies have specifically investigated their application to serpentinization-derived gas streams.

This work evaluates the performance of two commercial polymeric membrane modules (Evonik and Generon) and one palladium-copper (Pd-Cu) membrane module (Okaya) for hydrogen recovery from gas compositions representative of serpentinization environments. An …

Gas Lift Valve Operation Under Elevated Pressure And Temperature Conditions, Pedro O. De Melo Flores

LSU Master's Theses

Gas lift valves are critical components in artificial lift systems, and their performance directly influences well unloading efficiency and long-term production. Current industry models used to correct valve opening and closing pressure for temperature rely on assumptions that have not been extensively validated against experimental data. This study experimentally investigates the opening and closing behavior of injection pressure-operated (IPO) gas lift valves under controlled elevated-temperature conditions. A load rate test bench was modified to include a heating system capable of maintaining valve temperatures up to 220°F. Five gas lift valve designs from multiple manufacturers were tested over a range of …

Developments Of New Metal-Free Batteries And Self-Charging Batteries For Sustainability, Abhishek Paudel

LSU Doctoral Dissertations

The growing concerns over the limitations and environmental impact of conventional lithium-ion batteries (LIBs) have driven the search for more sustainable energy storage solutions. Metal-free batteries, such as those utilizing ammonium ions (NH₄⁺), offer a compelling alternative due to their non-toxic nature, abundant availability, and unique electrochemical properties. The NH₄⁺ ion's lower molar mass and distinct tetrahedral structure enable efficient charge transfer and intercalation, distinguishing it from traditional metal ions and potentially improving battery performance. Self-charging batteries, which integrate piezoelectric materials to harvest ambient mechanical energy, present a significant advancement in energy storage technology. By capturing and converting mechanical energy …

Advancing Solar Farm Resilience: Cfd-Driven Wind Load Optimization, Aly Mousaad Aly

Faculty Publications

This study investigates wind load design methods for ground-mounted solar panels and arrays by comparing Computational Fluid Dynamics (CFD) simulations with design standards. A case study of a solar farm impacted by Hurricane Maria examines the effects of elevation height, tilt angle, and variations in the American Society of Civil Engineers (ASCE) standards on wind loads and structural failure. Turbulence models, including Reynolds Stress Model, k–ε Model, and Large Eddy Simulation (LES), are used to analyze wind pressures, lift, drag, and peak pressures. Results show Phase 1 experienced higher wind loads than Phase 2 due to design differences. A cost-benefit …

Development Of Multifunctional Wood Composites With Integrated Phase Change Materials For Enhanced Thermal Management, Self-Healing, And Sustainability., Emmanuel Igbokwe

LSU Master's Theses

Abstract

This study focused on incorporating self-healing, flame retardancy, and energy harvesting capabilities into the wood composite to contribute to more sustainable and energy-efficient building practices. Oriented strand board has been widely used as sheath for roofing or dry walls in residential buildings. Residential buildings account for a large portion of energy consumption. Therefore, an oriented strand board with energy harvesting capability is highly desired. Additionally, flame retardancy and damage self-healing and end-of-life recycling are also critical features for buildings.

In this study, we prepared a novel oriented strand board by constructing sandwich structures. The face sheets of the sandwich …

Development, Implementation, And Evaluation Of Swirl-Combustion Strategies For Optimal Performance Of Ammonia As A Fuel For Gas Turbine Engines, Varun Nanjunda Rao Viswamithra

LSU Doctoral Dissertations

In an effort to reduce harmful effects of greenhouse gas emissions, ammonia is being pursued as a fuel for power generation as it is a carbon-free energy source. However, the use of ammonia-air mixtures in premixed swirl combustors poses challenges due to low flame speed and reactivity resulting in combustor stability issues in addition to high Nitrous Oxide (NOx) emissions due to the presence of fuel-bound Nitrogen. The first part of this study attempts to overcome lean blowout limits of methane-ammonia-air mixtures using a novel, multi-point () injection strategy, whereby micron-sized holes on the swirler vanes generate a co-flowing stream …

Modeling Of Heat And Mass Transfer In Flat Heat Pipes, Salar Saadatian

LSU Doctoral Dissertations

Phase-change phenomenon is ubiquitous in nature and widely utilized in thermal management of computer chips. Flat heat pipes have been extensively used in thermal management of microelectronic devices. However, existing research mainly concentrates on developing numerical models and lacks a systematic analytical approach to elucidate the working mechanism of flat heat pipes. We consider a horizontal flat heat pipe with an idealized porous wick. The pores in the wick are straight circular capillaries running along and across the wick and are filled with a liquid. The rest of the pipe is filled with its vapor. The mass evaporative rate at …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Accelerated Controller Tuning For Wind Turbines Under Multiple Hazards, Aly Mousaad Aly, Milad Rezaee

Faculty Publications

During their lifecycle, wind turbines can be subjected to multiple hazard loads, such as high-intensity wind, earthquake, wave, and mechanical unbalance. Excessive vibrations, due to these loads, can have detrimental effects on energy production, structural lifecycle, and the initial cost of wind turbines. Vibration control by various means, such as passive, active, and semi-active control systems provide crucial solutions to these issues. We developed a novel control theory that enables semi-active controller tuning under the complex structural behavior and inherent system nonlinearity. The proposed theory enables the evaluation of semi-active controllers’ performance of multi-degrees-of-freedom systems, without the need for time-consuming …

An Improved Foam Modeling Technique And Its Application To Petroleum Drilling And Production Practice, Yanfang Wang

LSU Doctoral Dissertations

Foam is one of the most common used multiphase fluid in Underbalanced Drilling (UBD) and Managed Pressure Drilling (MPD). Because of its low density, high capacity of lifting and carrying cuttings, low cost and compatibility with formations, foam has become more superior than the conventional drilling mud when depleted reservoir pressure, severe lost circulation, or unstable borehole are encountered. In general, the success of foam applications rely on the understanding of the fundamentals of foam rheology in downhole conditions.

Foam rheology has been studied for decades. Conventional foam rheological models such as Power Law, Bingham Plastic, Herschel-Bulkley to explain foam …

Development Of Water Coning Control Design Metrics In Naturally Fractured Reservoirs, Samir Prasun

LSU Doctoral Dissertations

Naturally fractured reservoirs (NFRs) with bottom-water are known for their instant water breakthrough and severe water coning that reduces oil recovery. This is because water channels through the highly permeable fractures easily connecting the well to the aquifer bypassing the oil contained in the matrix. Remedial techniques such as producing below critical-oil rate, optimizing the well spacing and installing the downhole water sink (DWS)/ downhole water loop (DWL) technology, have already been successfully tested in single-porosity reservoirs (SPR). However, applicability of these techniques in NFRs are unknown since only a few studies have been performed on their feasibility in NFRs, …

A Systematic Investigation Of Condensation Heat Transfer Using Asymmetric Micro-Scale Surfaces, Emily Brown

LSU Master's Theses

Asymmetric surfaces been shown to inducing unidirectional motion in the Leidenfrost regime; however, very minimal research has been conducted to investigate whether these surface can enhance condensation through the same means. The investigation of heat transfer of ratchets in condensation is a relatively untapped area of study, specifically ratchets with superhydrophobic properties. Anticipated difficulty lies in creating surfaces features or coatings that retain the ratchets and can adequately sustain optimal wetting state of Cassie-Baxter required to improve heat transfer performance during condensation. This study serves to investigate whether ratchets are a feasible surface feature to enhance condensation heat transfer. First, …

Novel Design And Synthesis Of Composite Nanomaterials For Lithium And Multivalent Ion Batteries, Wangwang Xu

LSU Doctoral Dissertations

Nowadays, the fast-increasing energy demand for efficient, sustainable and environmentally-friendly energy storage devices remains a significant and challenging issue. Lithium ion batteries (LIBs) have been widely used as commercial energy devices in portable electronics and also shown great promise in upcoming large-scale applications due to their advantages of environmental safety, efficiency in energy delivering and light weight. However, due to their limited capacity, energy densities and cycle ability, LIBs still need further improvement to expand their applications to a larger field, especially electric vehicle (EVs) and hybrid electric vehicles (HEVs), in which energy storage devices with large capacity and high …