Energy Systems Commons^™

Implications Of Electric Vehicles On Gasoline Tax Revenues, Florida Solar Energy Center, Kevin Schleith

FSEC Energy Research Center®

This report summarizes the results of research conducted to determine if current and near future EV sales will have an impact on gasoline (gas) tax revenues as part of the Federal Highway Trust Fund (HTF). Gasoline taxes account for $31.1 billion or about 87% of the HTF. The project results were accomplished through a review of existing industry and government reports that detail fuel tax revenues and through analysis of EV sales from 2010 to 2015.

Thermal Hydraulic Turbine Dynamometer, Ryan Baskett, Alexander Campbell, Andrew Puntorno-Carlberg

Mechanical Engineering

No abstract provided.

High Temperature Hepa Filter Test Unit Upgrades, Alexander Krippner, Ian Corcorran, Michael Burlando

Mechanical Engineering

No abstract provided.

Industrial Energy Consumption, Benchmarking, And Analysis In The United States, Daniel Maldonado

Mechanical Engineering Undergraduate Honors Theses

The purpose of this paper is to analyze the energy consumption of the industrial sector in the United States, and to identify the tools that can be used to minimize the consumption and improve the energy efficiency of all facilities in the country. The first part of the paper is a historical analysis of the industrial sector energy consumption, where the different energy sources are identified. The second part details different electronic tools that will provide facilities the ability of performing benchmarking, in order to understand their energy performance. Finally, the third part of this paper provides information about the …

A Look At Commercial Building Energy Use And Energy Efficiency Technologies From 1980 To Present, Marvin M. Arroyo

Mechanical Engineering Undergraduate Honors Theses

Energy consumption has increased considerably in the last fifty years as population rises. At the same time, design and efficiency of all equipment used in commercial buildings have changed as well. The purpose of this thesis is to explain how HVAC systems have changed and how they have affected energy consumption. Entities like the US Department of Energy (DOE) and the US Energy Information Administration (EIA) facilitate the data-gathering process by offering databases of energy information from actual monthly energy bills to promote public understanding of energy and its interaction with the economy and the environment. Moreover, in order to …

Evaluation Of Two-Phase Evaporation Pressure Drop Correlations For Low Refrigerant Mass Flux., Anna Fenko

Electronic Theses and Dissertations

This study was conducted to evaluate three currently popular two-phase pressure drop models for extremely low velocity refrigerant flow through smooth circular evaporators in household refrigeration systems. Experimental data was taken at mass fluxes under 70 kg/m²s for two refrigerants, R134A and R600A, internal diameters of aluminum evaporators ranging from 0.186 to 0.317 inches, U-bend internal radii ranging from 0.342 to 0.750 inches in horizontal and vertical orientations of evaporators. The geometry of the samples closely resembled a commonly used serpentine shape with multiple U-bends experiencing both, up- and down-flow of the refrigerant. Two empirical models, Müller-Steinhagen & …

Simulation Of An Air Cooled Single-Effect Solar Absorption Cooling System With Evacuated Tube Collectors, Mohsen Jahandardoost

UNLV Theses, Dissertations, Professional Papers, and Capstones

Consistently increasing CO2 emission and ozone depletion from synthetic refrigerants are serious environmental issues challenging the scientific community. Absorption cooling systems give scope of utilizing low grade energy source for generating cooling effect. Solar energy is one of these low grade energy sources and with considering the fact that cooling demand increases with the intensity of solar radiation, solar refrigeration has been considered as a logical solution.

This thesis consists of two different simulation stages, in the first stage, a single effect lithium bromide absorption cooling system with constant cooling capacity is modeled and the effect of ambient and generator …

Cultural Change Through Bim: Driving Lean Transformation In Education, Avril Behan, Malachy Mathews, Kevin Furlong, Ciara Ahern, Una Beagon, Peter Brennan, Colin Conway, Lee Corcoran, Pierce Fahy, Alan Hore, Barry Mcauley, Trevor Woods

Conference papers

This paper presents a case study of how the adoption of BIM-based practices in the AECO industry is being reflected by cultural change in higher education in Ireland. The silo-mentality that has dominated the AECO sector for more than a century has, despite numerous reorganisations, been replicated in the structures of educational institutions, including in Dublin Institute of Technology since the inception of its founding colleges in the late 1800s. Most AECO programmes must include content that is external to the programme’s specific discipline. Through the School structures of the Institute, delivery of such content is known as "service teaching" …

Semi-Annual Program Progress Performance Report For University Transportation Systems, Pppr#4, October 2015, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

A summary of the major activities reported in the following pages is as follows. In the research area, the collection and analysis of data from the Nissan funded DC fast charger at FSEC (Project #3), the development of a student and faculty battery laboratory at Tuskegee University (Project #8), the opening of a new University of Hawaii battery test lab (Project #9), a computer model to optimize electrical costs for Tallahassee StarMetro buses (Project #14), and the installation and beginning of data collection from the FSEC wireless charging laboratory (Project #15). Detailed industry interactions for the period included Nissan, NovaCharge, …

Why Doesn't 25 Years Of An Evolving Energy Code Make More Of A Difference?, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

This paper was presented at the 2015 Behavior, Energy and Climate Change Conference (BECC). New and more stringent building energy codes are implemented with the assumption and expectation that significant energy conservation will occur. While simulation and various analysis methodologies may be reasonably sound at estimating the energy impact, the actual impact is largely dependent upon new code enforcement and occupant behavior. This work is based upon the research question: Do homes built to a newer energy code deliver measurable energy savings compared to homes built to a much earlier energy code? This residential research study was focused on comparing …

Simulating The Energy Performance Of A Foam Roof System, Florida Solar Energy Center, Jeffrey Sonne

FSEC Energy Research Center®

Annual residential simulations were run in 13 US cities to determine the energy savings of using an insulated foam tile roof in retrofit applications where ceiling insulation was only R-11 or R-19. Variations included leaving the attic vented and sealing the attic space.

Thermodynamic Analysis Of Closed Steady Or Cyclic Systems, Jim A. Mcgovern

Articles

Closed, steady or cyclic thermodynamic systems, which have temperature variations over their boundaries, can represent an extremely large range of plants, devices or natural objects, such as combined heating, cooling and power plants, computers and data centres, and planets. Energy transfer rates can occur across the boundary, which are characterized as heat or work. We focus on the finite time thermodynamics aspects, on energy-based performance parameters, on rational efficiency and on the environmental reference temperature. To do this, we examine the net work rate of a closed, steady or cyclic system bounded by thermal resistances linked to isothermal reservoirs in …

An Energy Cube Project For Teaching Engineering Design Process, Fionnuala Farrell, Shannon Chance, Micheal O'Flaherty

Conference papers

This year, the College of Engineering and the Built Environment at our institute inaugurated a new Common First Year design project module that helps inform students in the selection of a specific engineering discipline. Each student, prior to selecting their bachelor’s specialism, completes three group-based design projects: a bridge design project (to familiarise students with civil and structural engineering), a RoboSumo project (involving robotics, programming, electrical and electronics engineering), and an Energy Cube project (introducing fundamentals of mechanical, manufacturing and design, and building services engineering). This paper focuses on how the engineering design process was taught via the Energy Cube. …

Assessment Of Critical Technologies For Gas Turbine Engines Using Numerical Tools, Vinicius Pessoa Mapelli, Guillermo Paniagua, Jorge Sousa

The Summer Undergraduate Research Fellowship (SURF) Symposium

In 2014 gas turbine engine has reached a market value of 82.5 billion dollars, of which 59.5% are related to aircraft propulsion. The continuous market expansion attracts more and more the interest of researchers and industries towards the development of accurate numerical techniques to model thermodynamically the entire engine. This practice allows a performance and optimization analysis before the actual experimental testing, reducing the time and required investment in the design of a new engine. In this paper, a recently developed open source numerical tool named “Toolbox for the Modeling and Analysis of Thermodynamic Systems” (T-MATS) is used to assess …

Hot Surface Ignition, Yerbatyr Tursyn, Vikrant Goyal, Alicia Benhidjeb-Carayon, Richard Simmons, Scott Meyer, Jay P. Gore

The Summer Undergraduate Research Fellowship (SURF) Symposium

Undesirable hot surface ignition of flammable liquids is one of the hazards in ground and air transportation vehicles, which primarily occurs in the engine compartment. In order to evaluate the safety and sustainability of candidate replacement fuels with respect to hot surface ignition, a baseline low lead fuel (Avgas 100 LL) and four experimental unleaded aviation fuels recommended for reciprocating aviation engines were considered. In addition, hot surface ignition properties of the gas turbine fuels Jet-A, JP-8, and JP-5 were measured. A test apparatus capable of providing reproducible data was designed and fabricated to experimentally investigate the hot surface ignition …

Fracture Mechanics-Based Simulation Of Pv Module Delamination, Dominic I. Jarecki, Johanna B. Palsdottir, Peter Bermel, Marisol Koslowski

The Summer Undergraduate Research Fellowship (SURF) Symposium

Photovoltaic (PV) cells are rapidly growing as a renewable alternative to fossil fuels like coal, oil, and natural gas. However, greater adoption has also reduced government subsidies, placing the onus of making solar panels economically competitive on innovative research. While multiple methods have been considered for reducing costs, with each reduction in cost comes the associated peril of reduction in quality and useful lifetime. Several problems considered solved have now resurfaced as potential failure mechanisms with the introduction of cheaper PV cell technologies. However, to remain economically viable, PV modules will not only have to become cheaper, they will have …

Three-Dimensional Scaffolds Of Graphene, Carbon Nanotubes And Transition-Metal Oxides For Applications In Electronics, Sensors And Energy Storage, Gilbert N. Mbah

Department of Chemistry: Dissertations, Theses, and Student Research

Electronics, sensors and energy storage devices are the new waves behind economic development, security and communication¹. Engineering small sizes of electronic, sensors and energy storage devices is the hurdle limiting efficient, portable and vast applications of Nano-devices for economic, security and communication advancement². Silicon the major material used in transistors has approached its limit to fabricated Nano-devices³. The discovery of free standing, one atomic layer thick and two-dimensional graphene sheets with high conductivity, inert, high specific surface area, stable and high tensile strength material in 2004 has shown capabilities to replaced silicon in electronics, …

Triboelectric Solar Generator Concept And Experimental Research, Elias Yazdanshenas

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, a novel concept, a triboelectric solar generator (TSG ), is proposed for generation of high voltage direct current (HVDC) electricity from solar radiation. An experimental investigation was conducted to prove the concepts of charge generation through the triboelectric effect and charge transmission using semiconductors. The triboelectric effect, also known as the contact electrification, is a well-known physical phenomenon that electrostatic charges are generated by rubbing dissimilar materials. However, traditional triboelectric generators had never been commercialized due to their poor power output. Physically, it is due to the difficulty of charge transmission from insulators, which generate charges. The …

Sunsense/Sunsmart Plus-Up Schools Program Final Inspection Report, Florida Solar Energy Center, Susan Schleith

FSEC Energy Research Center®

This report provides information regarding the photovoltaic systems that are associated with the 2014 Sunsense/Sunsmart School Plus-UP program. Dave Click led the project as Principal Investigator and technical expert. Susan Schleith, participated as Co-Principal Investigator and education/school liaison. Four schools participated in the program. Each of the photovoltaic systems installed at the schools was inspected by the University of Central Florida's Florida Solar Energy Center (FSEC), as well as the local authority having jurisdiction (AHJ). This report details the results of the final inspections associated with National Electric Code (NEC) and performance testing as required by the Sunsense/Sunsmart Schools Plus-UP …

The Epa P3 Program: An Opportunity For Growing Student Entrepreneurs, Marc Compere, Yan Tang, Yung Wong

Publications

In this paper we will share our experiences of fostering entrepreneurial spirit through projects funded by EPA (Environmental Protection Agency) P3 (People, Prosperity, and the Planet) Program which hosts the P3 collegiate competition for designing solutions for a sustainable future. Since 2012, we have integrated the P3 competition with the capstone design course of Clean Energy Systems track in mechanical engineering as an effective educational vehicle for introducing the concept of sustainable design. Since the competition focuses on designs which have values of real world application, it is also a great opportunity to create entrepreneurial spirit. We have successfully turned …

Investigation Of The Effectiveness And Failure Rates Of Whole-House Mechanical Ventilation Systems In Florida, Florida Solar Energy Center, Jeffrey Sonne

FSEC Energy Research Center®

This report presents the results of a field investigation of the effectiveness and failure rates of whole-house mechanical ventilation systems installed in Florida homes over the last 15 years. The report includes homeowner survey and ventilation system testing results and code modification recommendations based on study findings.

Cooling And Heating Season Impacts Of Right-Sizing Of Fixed- And Variable-Capacity Heat Pumps With Attic And Indoor Ductwork, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

The U.S. Department of Energy's research team Building America Partnership for Advanced Residential Construction implemented two phases of experiments to examine the cooling and heating seasonal and peak demand performance of a variable-capacity 2-ton SEER 22 heat pump versus a 3-ton variable-capacity SEER 21 heat pump with attic ducts and indoor ducts. The experiments also compared the cooling and heating seasonal and peak demand performance of 2-ton versus 3-ton fixed-capacity SEER 13 heat pumps with attic ducts and indoor ducts.

Solar Decathlon 2015, Solar Cal Poly; Solar Cal Poly Project Engineers, Cristina Paquin, Julien Blarel, Sanchit Joshi

Mechanical Engineering

No abstract provided.

Solar Cal Poly Active Hvac Project, James Cornish, Jake Cosmo, Patrick Weston

Mechanical Engineering

For this project, the goal was to conceptualize, design, test, and implement an active HVAC system to be used in the Solar Cal Poly house competing in the Department of Energy’s 2015 Solar Decathlon. With many house iterations, it was decided to use a split system with an outdoor heat pump and indoor air handler, paired with a HRV for ventilation. Through system modeling using Design Builder and Energy Pro 6.5, the cooling load of the house was determined along with the cooling schedule. The foreseen safety precautions and limited construction time guided the entire project, along with the active …

Increasing Isentropic Efficiency With Hydrostatic Head And Venturi Ejection In A Rankine Power Cycle, Nathan Daniel Ruiz

Master's Theses

This thesis describes the modifications made to the Cal Poly Thermal Science Laboratory’s steam turbine experiment. While the use of superheating or reheating is commonly used to increase efficiency in a Rankine cycle the methods prove unfeasible in a small scale project. For this reason, a mathematical model and proof of concept design using hydrostatic head generated by elevation and venturi ejection for use by the condenser is developed along with the equations needed to predict the changes to the system. These equations were used to create software to predict efficiency as well as lay down the foundation for future …

Conversion Of A Gas Combustion Engine To An Electric Motor In A Porsche 924, Ashley Weed

BioResource and Agricultural Engineering

This paper is a walk-through of converting a gasoline Porsche 924 to and electric engine. The paper begins with steps on how to remove the gasoline engine. It then goes into setting up the electrical system for the new electric vehicle and then follows up with the motor installation. The end of the report discusses the testing and results of the electric vehicle and finishes up with recommendations to anyone who attempts a similar project.

Shark Alert: Early Warning System, Cory Peterson, Marc Rauschnot, Taylor Mcclain

Electrical Engineering

The Shark Alert Early Warning System is a device geared toward avid beach goers such as surfers, divers, and swimmers. The system is composed of an ultrasonic transmitter mounted on a shark’s dorsal fin and a receiver worn by the user around the ankle. The receiver alerts the user to the presence of a shark upon ultrasonic signal detection.

The receiver warns the user through both visual and tactile (vibration) alerts to ensure user notification. This circuit was built and tested in the EE labs and Recreation Center pools to determine transmission range. The receiver detects the transmitted signal up …

Power Maximization Of A Three-Phase Hydrokinetic Turbine, Matthew Carleson

Senior Theses

As Earth`s expendable resources dwindle, the need for alternative, renewable energy sources grows. Out of this need, an old favorite source is rising in popularity: small water turbines. Water-driven turbines first began as a means for turning mills and eventually evolved into massive dams that can power whole regions. This project focused on the construction of, and testing the properties of, a small pico-hydro power turbine. By using compressed air to drive the turbine, a representation of the peak power output was measured, serving as a basis for determining the value of pico-power systems in regards to the world`s current …

Developing Exhaust Air Energy Recovery Credits For The Florida Energy Code, Florida Solar Energy Center, Bereket Nigusse

FSEC Energy Research Center®

Energy Recovery Ventilator (ERV) or Heat Recovery Ventilator (HRV) devices recover energy from building's exhaust air to precondition outdoor air. Energy savings of ERV/HRV devices were determined for various commercial buildings in Florida climate using whole building energy simulation tool. The annual HVAC energy percent savings due to ERV/HRV device were calculated from HVAC energy use of a standard reference building without and with ERV/HRV device using EnergyPlus. The annual HVAC energy savings potential (ERV Credits) will be used for code compliance calculation when a compliance software does not have ERV modeling capability. The ERV/HRV credits were reported by building …

Maximum Energy Efficiency Cost Effectiveness In New Home Construction, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

EnergyGauge® USA (v.4.0.00) is used to examine the cost effectiveness of high performance homes that are improved to significantly exceed the minimum requirements of the 2015 IECC. The objective of the study is to determine the maximum level of energy efficiency that can be considered cost effective to the consumer. For these purposes, it is the cost effectiveness of the entire package of measures that is considered by the analysis rather than the cost effectiveness of individual measures. Optimization and rank ordering of the individual improvement measures in the package is not considered by the analysis.

One-story 2,000 ft^{2 …}