Energy Systems Commons^™

Electro-Chemo-Mechanics Of The Interfaces In 2d-3d Heterostructure Electrodes, Vidushi Sharma

Dissertations

Unique heterostructure electrodes comprising two-dimensional (2D) materials and bulk three dimensional (3D) high-performance active electrodes are recently synthesized and experimentally tested for their electrochemical performance in metal-ion batteries. Such electrodes exhibit long cycle life while they also retain high-capacity inherent to the active electrode. The role of 2D material is to provide a supportive mesh that allows buffer space for volume expansions upon ion intercalation in the active material and establishes a continuous electronic contact. Therefore, the binding strength between both materials is crucial for the success of such electrodes. Furthermore, battery cycles may bring about phase transformations in the …

Energy Planning Model Design For Forecasting The Final Energy Consumption Using Artificial Neural Networks, Haidy Eissa

Theses and Dissertations

“Energy Trilemma” has recently received an increasing concern among policy makers. The trilemma conceptual framework is based on three main dimensions: environmental sustainability, energy equity, and energy security. Energy security reflects a nation’s capability to meet current and future energy demand. Rational energy planning is thus a fundamental aspect to articulate energy policies. The energy system is huge and complex, accordingly in order to guarantee the availability of energy supply, it is necessary to implement strategies on the consumption side. Energy modeling is a tool that helps policy makers and researchers understand the fluctuations in the energy system. Over the …

Solution-Processed Flexible Broadband Zno Photodetector Modified By Ag Nanoparticles, N. P. Klochko, K. S. Klepikova, I. V. Khrypunova, V. R. Kopach, I. I. Tyukhov, S. I. Petrushenko, S. V. Dukarov, V. M. Sukhov, M. V. Kirichenko, A. L. Khrypunova

Faculty Research, Scholarly, and Creative Activity

In this work, we present flexible broadband photodetectors (PDs) fabricated by a deposition of nanostructured zinc oxide (ZnO) films on polyimide (PI) substrates by using cheap and scalable aqueous method Successive Ionic Layer Adsorption and Reaction (SILAR). In order to increase the long-wavelength absorption of the nanostructured ZnO layer, we created its intrinsic defects, including oxygen vacancies by post-treatment at 300 °C in vacuum and thus the light-sensitive material ZnO/PI was obtained. Then we applied silver nanoparticles (Ag NPs) from a silver sol onto a nanostructured ZnO film, which were visualized using SEM in the form of spheres up to …

Torque Vectoring To Maximize Straight-Line Efficiency In An All-Electric Vehicle With Independent Rear Motor Control, William Blake Brown

Theses and Dissertations

BEVs are a critical pathway towards achieving energy independence and meeting greenhouse and pollutant gas reduction goals in the current and future transportation sector [1]. Automotive manufacturers are increasingly investing in the refinement of electric vehicles as they are becoming an increasingly popular response to the global need for reduced transportation emissions. Therefore, there is a desire to extract the most fuel economy from a vehicle as possible. Some areas that manufacturers spend much effort on include minimizing the vehicle’s mass, body drag coefficient, and drag within the powertrain. When these values are defined or unchangeable, interest is driven to …

Nonmetallic Jet Impingement Thermal Management For Power Electronics Via Additive Manufacturing, Reece Whitt

Graduate Theses and Dissertations

The increase in energy demanded by transportation and energy sectors has necessitated highly efficient thermal management for reliable power electronics operations. Conventional cooling techniques are limited by their inability to target switching location hot spot temperatures, leading to non-uniform thermal gradients. These devices, such as cold plates and heat sinks, also utilize heavy metallic structures that can accentuate electromagnetic interferences generated by high voltage switching processes. This work proposes a non-metallic jet impingement cooler for more customized thermal management, while simultaneously reducing the harmful effects of electromagnetic interferences. Additive manufacturing is utilized to enable jet impingement zones to target individual …

Hobby Grade Lithium-Ion Batteries For Spacecraft Applications: Establishing An Automated Electrical Characteristics Testing Procedure For Flight Acceptance Of Non-Space-Grade Small Secondary Batteries, Braidon Hughes

Graduate Theses and Dissertations

Li-ion batteries are widely used due to the large amount of rechargeable energy they pack into a small, light package. This higher energy density makes Li-ion batteries ideal for small satellite applications, specifically CubeSats. CubeSats have grown in popularity in higher level education due to the National Aeronautics and Space Administration’s implementation of the Cube Satellite Launch Initiative, making it easier and cheaper to conduct small, low orbit missions. Because these CubeSats are occupying the same space as a crewed spacecraft, it is imperative that they are safe. There are numerous reports of Li-ion batteries creating fires that result in …

Gasification Based Waste Tire Integrated Energy Conversion Systems, Karah Powell

Honors Theses

The objective of this study was to evaluate the operating parameters impacts on the performance of a gasification-based waste tire integrated energy conversion system. In this system, the waste tires are put into a downdraft gasifier that is providing fuel for a solid oxide fuel cell (SOFC). The system is evaluated by the syngas production, power generation, and overall efficiency under various operating conditions. A hybrid 1-D model was adopted to perform a parametric study of the tire gasification and calculations were done to estimate the integrated system power generation and overall efficiency using MATLAB. Three parameters were studied: the …

Development And Application Of A Digital Twin For Chiller Plant Performance Assessment, Mihir Kale

All Theses

As the complexity of industrial equipment continues to increase, the management of the individual machines and integrated operations becomes difficult without computer tools. The availability of streaming data from manufacturing floors, plant operations, and deployed fleets can be overwhelming to analyze, although it provides opportunities to improve performance. The use of dedicated monitoring systems in the plant and field to troubleshoot machinery can be integrated within a product lifecycle management (PLM) architecture to offer greater features. PLM offers virtual processes and software tools for the design, analysis, monitoring, and support of engineering systems and products. Within this paradigm, a digital …

Synthesis And Assessment Of Sustainable Fuels For Transportation And Space Exploration, Katerina Chagoya

Electronic Theses and Dissertations, 2020-2023

As global energy sources transition towards renewable energy, the demand for sustainable fuels has never been greater. The sheer scale of this transition will require numerous solutions to accommodate for the diverse and complex situations worldwide. This dissertation will discuss 3 studies: the utilization of CO2 waste gas to produce fuels sustainably, characterizing biofuels for efficient use in automobiles, and developing a solid, emissonless fuel intended for spaceflight but also applicable on Earth. The hydrogenation of CO2 into value-added molecules could reduce greenhouse gas emissions if waste stream CO2 were captured for conversion. We found that atomic vacancies induced in …

Atomistic Investigation Of Phase Stability And Sodium Ion Conduction In Sulfide Electrolytes., Sabina Zakhidovna Chertmanova

Electronic Theses and Dissertations

In this thesis, we employ a combination of density functional theory (DFT) calculations, and ab initio molecular dynamics (AIMD) simulations to identify the effect of chemical doping on (a) thermodynamic phase stability, and (b) Na-ion conduction in Na₃SbS₄ (NSS) solid-state electrolytes. We found that (a) Se doped electrolytes, namely, Na₃SbS_exS_4-x undergo a tetragonal-to-cubic structural phase transition at x > 3 (Se-rich), and (b) the size, valence, and electronegativity of chemical dopants that substitute Na in Na₃SbS₄ have a cumulative profound impact on Na-ion conductivity. Specifically, substituting Na with higher valence …

Design Of A 300cm2 Pemfc Stack With Force And Cfd Simulation To Optimize Flow Channels, Gasket Design, And Clamping Forces., Robert M. Ench

Electronic Theses and Dissertations

Proton exchange membrane fuel cells are important to the future of green energy as hydrogen can be made with green technologies and store energy for later use. Fuel cells can efficiently convert the hydrogen to electricity as needed. This study uses Solidworks simulation to make design improvements to the fuel cell before the prototype build stage of testing; this saves money and time by reducing the prototype builds needed.

In this study, a multi-channel serpentine design with two outlets versus a single outlet is evaluated using CFD to investigate pressure drop. Lower pressure drops are desirable as less energy input …

Solar-Powered Automated Transportation: Feasibility And Visualization, Burford J. Furman, Laxmi Ramasubramanian, Shannon Mcdonald, Ron Swenson, Jack Fogelquist, Yu Chiao, Alex Pape, Mario Cruz

Mineta Transportation Institute

A solar-powered automated transportation network (ATN) connecting the North and South campuses of San José State University with three passenger stations was designed, visualized, and analyzed in terms of its energy usage, carbon offset, and cost. The study’s methodology included the use of tools and software such as ArcGIS, SketchUp, Infraworks, Sketchup, Rhinoceros, and Autodesk 3DS Max. ATN vehicle energy usage was estimated using data from the university’s Park & Ride shuttle bus operation and by modeling with SUMOPy, the advanced simulation suite for the micro-traffic simulator SUMO. The energy study showed that an extensive solar photovoltaic (PV) canopy over …

Performance Loss Rate And Temperature Modeling In Predictive Energy Yield Programs For Utility-Scale Solar Power Plants, Katelynn M. Dinius

Master's Theses

The Gold Tree Solar Farm, designed by REC Solar, has a rated output power of 4.5 MW and began operation in 2018 to provide electricity to Cal Poly’s campus. Gold Tree Solar Farm site terrain consists of rolling hills and uneven slopes. The uneven typography results in interrow shading, requiring a modified tracking control algorithm to maximize power production. Predicting a utility solar field’s lifetime energy yield is a critical step in assessing project feasibility and calculating project revenue. The MATLAB-based predictive power model developed for this field overpredicted power in the middle of the day. The purpose of this …

How To Recognize And Control Interfacial Phenomena That Hinder The Advancement Of Clean Energy Technologies, Corey Michael Efaw

Boise State University Theses and Dissertations

Nuclear energy and electrochemical energy storage, such as batteries, are key parts to the clean energy transition of critical infrastructure. This work aims to define, monitor, and modify interfacial layers that would improve the utility of materials in harsh environments seen in nuclear and energy storage applications. First, the studying of zirconium alloys, which is used as nuclear cladding, was done to better understand the degradation mechanisms within an extreme environment. High-resolution characterization techniques were used to correlate corrosion mechanisms to equivalent circuit models from novel in-pile electrochemical impedance spectroscopy sensors. Advancement in this sensor technology could provide further insight …

Moisture Affinity Of Hdpe/Phase-Change Material Composites For Thermal Energy Storage Applications, Sandra K. Boetcher, Thomas B. Freeman, Rafael M. Rodriguez, Kashif Nawaz

Publications

Moisture adsorption can degrade the structural integrity of thermal energy storage devices and can negatively impact the capacity and charging/discharging behavior. Steady-state and transient experiments are conducted at various operating temperatures to evaluate the moisture affinity of organic phase-change material (PCM) shape stabilized with high-density polyethylene (HDPE).

Investigations Of The Negative Temperature Coefficient Region Of Sustainable Aviation Fuels For Mitigation Of Global Warming, Richard C. Smith Iii

Honors College Theses

An investigation was led to determine the correlations between the durations of Ignition Delay (ID), Combustion Delay (CD), Derived Cetane Number (DCN), Negative Temperature Coefficient (NTC), Low-Temperature Heat Release (LTHR) regions, ringing intensity, and precent mass burn, and the effect of blending the Fischer-Tropsch (F-T) synthetic aerospace fuel (SAF), iso-paraffinic kerosene (IPK), with petroleum derived Jet-A aerospace fuel on these regions. Neat blends of Jet-A and IPK and three by mass blends of the fuels will be researched. These blends include mass percentages of 75%Jet-A and 25%IPK (75Jet-A25IPK), 50%Jet-A 50%IPK (50Jet-A50IPK), and 25%Jet-A 75%IPK (25Jet-A75IPK). The study will utilize a …

Feasibility Study Of Cold Ironing From Renewable Sources In The Nordic Region : Case Study : Port Of Kapellskär In Stockholm, Aymen Abdaoui

World Maritime University Dissertations

No abstract provided.

Analysis Of Liquefied Natural Gas (Lng) Systems With Innovative Waste Heat Recovery, Shisir Acharya

LSU New Orleans Theses and Dissertations

Due to the increase in energy needs all over the world, many nations do not have sufficient indigenous energy resources and have turned towards importing Liquefied Natural Gas (LNG). LNG production is an energy intensive process that produces a lot of wasted heat. The objective of this study is to review the current LNG processes and identify areas of improvement. To begin with, this study analyzes wasted energy recovery methods currently used in various power plants, followed by validation of the capability of the software, Thermoflex, against the published performance data of various power plants and corresponding gas cleanup processes. …

Assessment Of The Impacts Of Climate Variability On Hydropower Generation: A Case Study Of The New Pangani Falls, Tanzania, Dativa Byarufu

Tanzania Journal of Engineering and Technology (TJET)

Climate change poses potential impacts on hydropower generation either positively by increasing or negatively by decreasing river flow. This study assessed the impacts of climate variability on hydropower with a focus on the New Pangani Falls in Tanzania. Rainfall and temperature time series data from 1980-2014 were analyzed in relation to river discharge and associated impacts to hydropower generation. The Man-Kendall test was used to detect trend in both annual and seasonal time series. The results showed a negative trend in annual rainfall with Z= -2.41 at α = 0.05 and the slope Q = -0.964. Seasonal trend analysis showed …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Dynamic Hvac Energy Management Using Commercial Building Occupancy Metrics & Neural Networks, Krishna Chaitanya Jagadeesh Simma

Civil Engineering ETDs

With the rise of technology use in buildings, it is now possible to collect data that can be used to improve building energy consumption. One factor that has significant impact on building energy consumption is occupancy. Recent studies have shown promising results in obtaining occupancy information from existing infrastructure such as WiFi router networks. However, these existing frameworks require additional investments through software upgrades, added infrastructure, computational resources, and may raise occupant privacy concerns. Additionally, with occupant thermal comfort statistics being lower than ASHAREA specified standards, a novel approach for indoor climate control is needed. To address the limitations in …

Tribological Studies Of Thick Polytetrafluoroethylene Coatings Enhanced By Polydopamine And Nanoparticles, Sujan Kumar Ghosh

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a popular low friction solid lubricant with high chemical and thermal stability. Thick PTFE coatings have the potential for many tribological applications, such as replacing Tin-based Babbitt materials in journal bearings. However, the weak bonding strength to the substrate and the high wear rate of PTFE coatings are current limiting factors. The lack of understanding of their tribological properties and wear mechanisms in oil-lubricated conditions and how coating thickness affects the tribological performance further hindered the use of PTFE coatings. In this dissertation, polydopamine (PDA), a bio-inspired adhesive, is used as an underlayer for or as a …

Development Of Novel Battery Materials For Lithium-Ion Batteries And Beyond, Jiyu Cai

Graduate Theses and Dissertations

As fossil fuels are depleting and causing environmental issues, it becomes imperative to widely implement renewable energies (e.g., solar and wind power). In this context, electrical energy storage (EES) systems are essential to accommodate the intermittent supply and uneven distribution of renewable energies. To this end, high-energy-density EES devices are highly demanded, such as rechargeable batteries. This dissertation presents my efforts in developing novel battery materials for lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and solidstate lithium batteries (SSLBs). These efforts include electrochemical evaluations of battery materials, surface modifications of electrodes via atomic layer deposition (ALD), and advanced characterizations of batteries …

High Temperature Degradation In Gan-Based Hall Effect Sensors, Alexis Anne Krone

Graduate Theses and Dissertations

This research focuses on understanding the effects of accelerated aging through temperature and environment on novel gallium nitride-based Hall effect magnetic field sensors and determining device reliability under electric vehicle operating conditions. The device reliability was modeled using accelerated aging for the temperatures of 200 °C, 350 °C, 450 °C, and 600 °C under various time steps unique to each temperature and either air, which is identical to operating circumstances, or argon, which would model the hermetic packaging environment. Using a high temperature furnace and oven, devices underwent high temperature storage tests at a chosen temperature and time step. Afterwards, …

Connected Water Heater Load Shifting And Energy Efficiency Evaluation For The Southeast: Winter Laboratory Assessment, Final Report, Florida Solar Energy Center, Karen Fenaughty

FSEC Energy Research Center®

The University of Central Florida's FSEC Energy Research Center (FSEC) and Pacific Northwest National Laboratory (PNNL) are conducting laboratory electrical load shifting experiments using the CTA-2045-A standard to demonstrate the viability of grid-connected heat pump water heaters (HPWH), compared to electric resistance water heaters (ERWH), in providing load shifting in the Southeastern United States (U.S.). The investigation applied different CTA-2045 shed and critical peak (CP) control command designs under two different water draw profiles. The highly-controlled laboratory experiments were conducted on four HPWHs and one ERWH from December 2020 through February 2021.

The research aimed to evaluate the load shifting …

Comparison Of The Residential Provisions Of The 7th Edition (2020) Florida Building Code, Energy Conservation With The 2021 Iecc, Florida Solar Energy Center, Jeffrey Sonne

FSEC Energy Research Center®

This report provides a comparison between the 7th Edition (2020) Florida Building Code, Energy Conservation (FBC-EC) and 2021 International Energy Conservation Code (IECC), based on approved 2018 to 2021 IECC changes included in the International Code Council's Complete Revision History to the 2021 I-Codes document. The first part of this study involved developing code change listings based on the Revision History document that identify changes that have potential energy and cost impacts. This second part of the study provides a stringency evaluation and cost-benefit analysis for those changes that impact energy use, to provide guidance for the upcoming 2020 FBC-EC …

Comparison Of The Commercial Provisions Of The 2020 Florida Building Code, Energy Conservation, 7th Edition With 2021 Iecc & Ashrae 90.1-2019, Florida Solar Energy Center, Bereket Nigusse

FSEC Energy Research Center®

This report provides comparison of the commercial provisions of the 7th Edition (2020) Florida Building Code, Energy Conservation (FBC-EC) with the 2021 International Energy Conservation Code (IECC) and ASHREA 90.1-2019. The first part developed code changes listing identifying energy and construction cost impacts. The second part analyzed energy and energy cost savings potential of the 2021 IECC and the 2019 ASHRAE 90.1 compared to the 2020 FBC-EC using prototype buildings energy model and simulation. And performed cost-benefit analysis of code changes with energy impact and provided recommendation for consideration by Florida Building Commission for addition to the 8th Edition (2023) …

Fluid-Structure Interaction Of Nrel 5-Mw Wind Turbine, Mohamed Sayed Elkady Abd-Elhay

Theses and Dissertations

Wind energy is considered one of the major sources of renewable energy. Nowadays, wind turbine blades could exceed 100 m to maximize the generated power and minimize produced energy cost. Due to the enormous size of the wind turbines, the blades are subjected to failure by aerodynamics loads or instability issues. Also, the gravitational and centrifugal loads affect the wind turbine design because of the huge mass of the blades. Accordingly, wind turbine simulation became efficient in blade design to reduce the cost of its manufacturing. The fluid-structure interaction (FSI) is considered an effective way to study the turbine's behavior …

Sustainable Tiny Home, Abigail Jessica Jones, Vince John Bugni, Sean Robert Paddy, Cameron Michael Gross

Mechanical Engineering

As housing prices and environmental concerns continue to increase, many people are looking for cheaper and more sustainable ways to live. A solution to both problems is building homes with smaller footprints which incorporate renewable energy and water-reclamation systems. In addition, adding a roof pond system to the dwelling also reduces the need for heating and cooling. The roof pond system uses a water bladder on the roof which acts as a heat-sink and moveable insulation panels. This document contains the process for our final design along with results from testing the verification prototype.

Cal Poly Wind Power: Wind Turbine Prototype, Sophie A. Spencer, Maggie Nevrly, Michael Reyna, Loi Q. Nguyen

Mechanical Engineering

The Cal Poly Wind Power (CPWP) club is competing in the Collegiate Wind Competition (CWC) hosted by the National Renewable Energy Laboratory (NREL). The CWC is hosted annually by NREL to increase the number of skilled workers prepared to work in the wind energy industry. Our senior project team is one of several design teams contributing to the CPWP prototype turbine design including the pitching mechanism, blade design, generator, and shaft. The scope of this project is to design the yaw mechanism, tower, and nacelle. The goal is to create components that function well with other planned components and are …