Dynamics and Dynamical Systems Commons^™

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Energy Optimal Coverage Motion Trajectory Generation Using A Fourth-Order Motion Profile, Mathias Halinga

Tanzania Journal of Engineering and Technology (TJET)

Industrial machines are widely used in manufacturing sector to manufacture several products to meet customer demands. Most of these industries runs all the time throughout a day leading to high operating cost. To cut costs and satisfy customer demand for precise products, industrial machines’ motion generation is important in improving machine motion precision while using less energy. This study presents a coverage motion energy optimization which is generated by linear interpolation of each segment described by the fourth-order motion profile. The phase changes in the profile are attained with continuity of machine kinematic limits jerk, acceleration, and velocity, which are …

Calibration Of Measurement Tools In The Experimental Test Rig For Hydropower Performance Evaluation, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

The demonstration of a typical hydropower plant requires the development of a test rig with the installation of tools to measure the performance parameters. The measurement tools require a calibration process to improve the quality of recorded data. This study involved the calibration of traditional and automated measurement tools connected to the hydropower test rig through an Arduino microprocessor. The automated measurement tools included a pressure transducer, flow meter, digital tachometer, and torque transducer, while traditional measurement tools, including a pressure gauge, concrete water tank, contact tachometer, and force lever arm balance, were connected in the same test rig during …

Data-Driven Constrained Control, Ali Kashani

Mechanical Engineering ETDs

Ensuring safety is a fundamental challenge. Traditional methods often rely on precise mathematical models, which are difficult, impractical, or costly to obtain for real-world systems with complex, nonlinear dynamics. This dissertation develops direct data-driven control approaches that enable safe and efficient operation of nonlinear systems without requiring explicit models or performing system identification. This effort leverages machine learning, optimization, and control theory to bridge theoretical rigor and practical applicability. Deterministic guarantees are provided based on the Lipschitz continuity of the system, and probabilistic guarantees through scenario optimization. The computation of safe sets is performed using one-shot approaches with broad neural …

Modeling Of Carbonization And Absorption Processes In Soda Ash Production, Nadirbek Rustambekovich Yusupbekov, Djalolitdin Paxritdinovich Mukhitdinov, Fatima Faxritdinovna Iskhakova

Chemical Technology, Control and Management

The article considers the problem of modeling the ammonia-soda process of soda ash production and presents the chemistry of sodium bicarbonate (NaHCO₃) formation. The equation of the kinetics of the reaction, used as a model of the carbonation process, is derived from a system of equations and its computer model is compiled. The system of differential equations reflecting the kinetics of the process was solved in the Mathcad package. The result of the modeling is presented. Based on the experimental data, the dependence of the absorption column performance on temperature and the dependence reflecting the optimal value of the absorption …

Algorithms For Making Control Systems Based On Neural Network Technology To Automate Dynamic Plants, Jasur Sevinov, Abdishukurov Maqsudovich Shavkat

Chemical Technology, Control and Management

This paper examines the stages of multilayer neural network technology for the control and identification of dynamic systems. It is seen many ways to use multilayer neural networks in control systems. Neural controllers are based on several models and algorithms. Examples of such algorithms include the predictive model-based control algorithm, the Narma-L2 control algorithm, and the benchmark model-based control algorithm. These controllers illustrate various general ways to use multilayer neural networks in control systems. Common, standard linear control architectures have been proposed for many neural controllers.

Design And Optimization Of Aquaculture Gear: Development Of A Cage-Integrated Reeling Mechanism For Oyster Farming, Felicity Bryant

Honors Theses

This project encompasses the design, fabrication, and testing of a cage-integrated reeling system aimed at reducing the physical labor required in oyster aquaculture at Bama Bay Oyster Farm, the last operational oyster farm in Mobile Bay. The proposed system includes two primary components: lightweight, modular oyster cages and a dual-winch reeling device for automated retrieval. Three cage prototypes—rectangular, oval, and hexagonal—were evaluated for structural performance and fabrication feasibility. The oval design was ultimately excluded due to practical fabrication limitations. The rectangular and hexagonal designs were fabricated using recycled materials and tested under the most extreme environmental conditions derived from years …

Microwave Ore Pre-Treatment Review And Process Flowsheet Conceptualization, Baker F. Giyani

Tanzania Journal of Engineering and Technology (TJET)

The global demand for mineral commodities has increased dramatically over the years, and this is largely due to several factors, including technological advancements, industrialization, and a rise in population. Further, the demand keeps increasing because the ore being mined is becoming more complex, and the feed grade is declining over the years, prompting the need for innovative technologies to treat such ores more efficiently. Microwave ore pre-treatment is one of the potential technologies that can be employed to improve process performance. This is possible because ores are composed of both good-microwave heaters and poor microwave heaters, which creates thermal stresses …

Application Of Artificial Neural Network Models For Predicting Diesel And Petrol Prices In The Geographically Sparsed Regions In Tanzania, John M. Kafuku

Tanzania Journal of Engineering and Technology (TJET)

Fuel consumption in Tanzania, mainly diesel and petrol, accounts for 82 percent of the energy consumption in the country, with significant price volatility affecting market stability, availability of fuel, and investment decisions. This study uses an artificial neural network (ANN) with a backpropagating algorithm to predict fuel prices in four regions of Tanzania. Key input parameters include the currency inflation rate (CIR), the petrol fuel inventory (PFI), the diesel fuel inventory (DFI), and the fuel transport costs (FTC). The study selected the 6-10-10-2 ANN structures for Sumbawanga-Rukwa, Mpanda-Katavi, and Mbeya-Mbeya as well as 6-10-9-2 for the Songea-Ruvuma region. The results …

Clustering Mini-Grids To Enhance Power Systems Reliability In Distributed Generation, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the effectiveness of clustering mini-grids as a method to improve the reliability and operational stability of distributed generation systems in remote areas, particularly where renewable energy sources are predominant. As renewable resources like solar and wind are increasingly integrated into mini-grids, these systems face various challenges, particularly in maintaining stable voltage and frequency across interconnected networks. Such issues are compounded by the intermittent nature of renewable energy sources and the lack of extensive communication infrastructure in rural or resource-constrained settings. To address these control challenges, this study applies droop control techniques to two mini-grids in Uganda, utilizing …

On The Exploration Of Crystallographic Anisotropy And Defects In Shock Loading Using Molecular Dynamics, Benjamin P. Helman

Theses and Dissertations

The impact of crystallographic orientation, grain boundaries, and vacancies on the shock behavior of aluminum was investigated using molecular dynamics simulations. Shock loading in the [001], [011], and [111] directions was explored, revealing anisotropic behavior in shock speed, melting, dislocation density, and unique phase changes. The Hugoniot elastic limit in the [100], [110], and [111] directions was calculated as 23.2 GPa, 24 GPa, and 18.4 GPa respectively. These results were found to be an order of magnitude larger than the compressive yield strength computed at equilibrium. Additionally, metastable melting in the [011] and [111] directions occurred roughly 1000 K below …

Heavy Metals Pollution In Roadside Ecosystems, Lilian Matafu

Tanzania Journal of Engineering and Technology (TJET)

Heavy metals refer to metallic elements that are characterized by having a relatively high density and they are toxic or poisonous even at low concentration. They are environmental pollutant owing to toxicity and longevity in atmosphere and ability to accumulate in living things via bioaccumulation. They tend to enter in different system such as food chain. Analyses of water, soil sediment and the surrounding growing plants (Cynodon dactylon and Cyperus species) for selected heavy metals (Cd, Pb, Zn and Cu) were conducted on a roadside pond located at Boko MSB, Dar es Salaam. Pond water, soil sediments and plant samples …

Assessment Of Wind Speed Characteristics And Available Wind Power Potential For Electricity Generation In Tanzania, Mwingereza John Kumwenda

Tanzania Journal of Engineering and Technology (TJET)

The energy demand and its associated crises are attracting significant attention due to population increase and economic growth especially in developing countries. Fossil fuel-based energy source stand as a prominent anthropogenic resource but they are accompanied with increased carbon emissions and heightened environmental concerns. Renewable energy sources such as wind energy can offers a lot of potential for sustainable growth in the energy sector of developing nations like Tanzania. Thus, this work investigated wind speed characteristics and available wind power potential in six selected regions in Tanzania with different topographical features for future electricity generation. The data of the wind …

Safety And Optimality Monitors For Learning-Enabled Systems Using Conformal Prediction, Jackson Cox

McKelvey School of Engineering Graduate Student Theses & Dissertations

The use of machine learning to create data-driven plant models and controllers has led to an increased need for safety and optimality monitors for model-based systems. System plant models are subject to uncertainty due to learning constraints such as unseen data and overfitting or physical constraints such as unknown dynamics and noise. This uncertainty is detrimental to safety-critical systems and must be properly regulated. To curb this uncertainty, we create prediction sets using the guarantees provided by Conformal Prediction. With a user-specified high probability, these prediction sets contain the true plant system states for an entire prediction horizon, which we …

3d Printed Microfluidic Fabrication Methodology, Characterization, Mechanical Design, And Applications In Electrostatic Artificial Muscles And Benthic Microbial Fuel Cells, Terak B. Hornik

Master's Theses

The fabrication of microfluidic devices often requires specialized methods. The development of these methods requires careful characterization and understanding of the processes involved. Using primarily PolyJet 3D printing technology, microfluidics offers a wide scope of applications such as microfluidic benthic microbial fuel cells (MBMFCs) and electrostatic artificial muscles. MBMFCs benefit from the confinement of the microbes resulting in close proximity between the electrode and the organisms. Using a modular design called the Sponge, assembly and upscaling is possible. Electrostatic artificial muscles benefit from a microfluidic approach due to the non-linearity of electrostatic attraction creating disproportionate benefits when miniaturized. When designed …

Collision Dynamics Of Compound Droplets In Microchannels: A Combined Numerical And Data-Driven Study, S M Abdullah Al Mamun

Dissertations

Understanding and predicting the hydrodynamic interactions of micron-scale droplets is crucial in a wide range of industrial and real-life applications, including microfluidics, pharmaceutics, drug delivery, food science, and enhanced oil recovery. These multi-phase and multi-scale phenomena are further complicated by the presence of core droplets of an immiscible fluid within shell droplets, known as compound droplets. The collisions and interactions of droplets in emulsions are influenced by various physical and geometric parameters, leading to distinct rheological and dynamic responses. This research employs numerical methods for a systematic parametric study of both simple and compound droplet pair collisions under confined shear …

Endwall Contouring For Lowering The Thermal Load And Augmenting The Turbine Efficiency, Arjun Kozhikkatil Sunil, Tide Porathoor Sunny

Makara Journal of Technology

Endwall contouring having significance in delineating ideal endwalls competent in thermal load depletion is the focus of this study. We have successfully utilized non-axisymmetric contoured endwalls to enhance turbine performance by controlling the secondary flow characteristics in a blade passage through steady-state numerical hydrodynamics. The supreme endwall pattern could lower the gross pressure loss at the design stage and is related to the size of the top-loss location being productively lowered. The selective numerical shape change using multi-objective optimization at the most prominent locations resulted in contoured endwall geometry and a considerable reduction of thermal exchange in the vane passage …

Capacitive Sensors With Ultra-Small Capacitance For Smart Measurement And Control Systems, Rustam Baratov, Farrux Jabbor O'G'Li Ko'charov

Chemical Technology, Control and Management

This article discusses methods of low capacitance measurement of capacitive sensors. The results of the study of the amplitude-frequency (AF) and phase-frequency (PF) response of measurement circuits of capacitive sensors for low capacitances measurement, consisting of RC - differentiating elements are presented. The input and output parameters of the differentiating circuit and the complex transfer function are analyzed. The research results show that low capacitances measurement by measuring the rectangular pulses duration is the most effective measurement method.

Analysis Of The Factors Affecting The Oil Recovery From Oilseeds In A Multistage Crosscurrent Leaching Process, Samuel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The analysis of the total oil recovery from oilseeds in a multi-stage crosscurrent leaching process is presented. The model created using mass balance equations for three stages was used to analyze the factors affecting total oil recovery, To. The key performance factors (raw meal feed flow rate, solvent feed flow rate in each stage, solvent distribution factor for each stage, percent oil in the raw meal (Poil), solids to solution ratio in the underflow (N), solvent to solids ratio (SSR), solvent to oil ratio (SOR) and wash ratio (WR) were varied while assessing To. While SSRi and SORi ranged from …

Development And Testing Of Small-Scale Flash Dryer For Maize Bran, Eden Ngowi

Tanzania Journal of Engineering and Technology (TJET)

Sun drying is the most common technique used to dry various food products due to its economic convenience. However, it is not effective owing to its unreliable nature leading to microbial deterioration and aflatoxin contamination of food. In Tanzania, about 1.3 million tonnes of maize bran are at risk of deterioration annually due to improper drying. The aim of this study was to design, fabricate and test an efficient small-scale flash dryer for maize bran. Using principles of material and energy balance, a small-scale flash dryer with a throughput of 500 kg of dry product per hour was designed resulting …

Lean Manufacturing Practices In Tanzania: Exploring Awareness, Training And Capital Investment, Francis D. Sinkamba

Tanzania Journal of Engineering and Technology (TJET)

With the growing competition among industries in the world, manufacturing industries are now forced to adopt the Lean Manufacturing philosophy to improve their competitive abilities. The adoption of the philosophy is very low in developing countries such as Tanzania, as is demonstrated with 1% of publications and the lack of knowledge and capital for Lean Manufacturing implementation causes this. Furthermore, the contribution of the sector to the Gross Domestic Product in Tanzania is low and stands at 8.4%. The study wants to bridge the gap in training, capital and awareness of Lean Manufacturing in Tanzania. Survey and purposive sampling techniques …

Assessment Of The Factors Affecting The National Ict Broadband Backbone (Nictbb) Systems Restoration Time, Victoria Mahabi

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the factors affecting the prolonged system restoration time when national ICT broadband backbone (NICTBB) services are affected by breakdown incidents. NICTBB is the government-owned backbone infrastructure constructed nationally by the Republic of Tanzania to increase the usage of ICT for equitable and sustainable socio-economic development and accelerate poverty reduction. This study utilised a mixture of exploratory and descriptive study approaches. The sample size determination was executed using purposing and simple random sampling, thus involving 289 respondents. The data reliability test was undertaken. It was followed by factor analysis, analysis of variances (ANOVA), linear regression analysis, and confirmed …

Perona-Malik Diffusion-Driven Regularization For Image Resolution Enhancement In Electrical Capacitance Tomography, Nassor Ally

Tanzania Journal of Engineering and Technology (TJET)

Electrical Capacitance Tomography (ECT) is a non-invasive promising method for monitoring industrial processes, such as oil-gas flow in pipelines and solid-gas flow in pneumatic systems. Despite its potential benefits, ECT generates poor-quality images, often used only for qualitative analysis. A non-linear relationship between measured capacitances and permittivity distribution and the ill-posedness of the sensitivity matrix elements causes this limitation. This hinders the applicability of ECT in monitoring online industrial process applications. This work proposes a reconstruction method based on a nonlinear diffusion function to generate high-quality images from the measured capacitance data from the ECT system. The diffusion regularization functional …

Can Smart Supply Chain Bring Agility And Resilience For Enhanced Sustainable Business Performance?, Mahak Sharma, Rose Antony, Ashu Sharma, Tugrul Daim

Engineering and Technology Management Faculty Publications and Presentations

Purpose

Supply chains need to be made viable in this volatile and competitive market, which could be possible through digitalization. This study is an attempt to explore the role of Industry 4.0, smart supply chain, supply chain agility and supply chain resilience on sustainable business performance from the lens of natural resource-based view.

Design/methodology/approach

The study tests the proposed model using a covariance-based structural equation modelling and further investigates the ranking of each construct using the artificial neural networks approach in AMOS and SPSS respectively. A total of 234 respondents selected using purposive sampling aided in capturing the industry practices …

Numerical Investigation Of Supersonic Flow Over A Wedge By Solving 2d Euler Equations Utilizing The Steger–Warming Flux Vector Splitting (Fvs) Scheme, Mitch Wolff, Hashim H. Abada, Hussein Awad Kurdi Awad Kurdi Saad

Mechanical and Materials Engineering Faculty Publications

Supersonic flow over a half-angle wedge (θ = 15°) with an upstream Mach number of 2.0 was investigated using 2D Euler equations where sea level conditions were considered. The investigation employed the Steger–Warming flux vector splitting (FVS) method executed in MATLAB 9.13.0 (R2022b) software. The study involved a meticulous comparison between theoretical calculations and numerical results. Particularly, the research emphasized the angle of oblique shock and downstream flow properties. A substantial iteration count of 2000 iteratively refined the outcomes, underscoring the role of advanced computational resources. Validation and comparative assessment were conducted to elucidate the superiority of the Steger–Warming flux …

Towing Tank Trials Of Hydrokinetic Turbine Scale Model To Support Marine Energy System Verification, Shahab Rouhi

LSU New Orleans Theses and Dissertations

In response to the escalating demand for sustainable energy solutions and the critical reevaluation of conventional fossil fuels due to environmental concerns, this dissertation embarks on a comprehensive exploration of hydrokinetic energy as a promising alternative. The study delves into the underexplored domain of hydrokinetic energy, leveraging innovative methodologies for effective utilization and harnessing, particularly through the development and investigation of hydrokinetic turbines.

In the realm of hydrokinetic energy conversion, our research has exclusively concentrated on horizontal-axis turbines, distinct from other turbine configurations. Noteworthy is the adaptation of a conventional horizontal-axis wind turbine for water currents, revealing enhanced performance through …

Investigation On The Effects Of Biofouling On The Boundary Layer, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This study is an investigation of the effect of biofouling on the boundary layer of a flat plate and a NACA 4-digit series foil. Three identical hydrofoils made of resin were placed in the Gulf of Mexico at Grand Isle, Louisiana, and observed and analyzed by marine biologists at the University of New Orleans for their species composition. The resulting biofouling that grew was primarily made up of barnacles and bryozoans. The foils were submerged in an open channel flume at zero incidence and subjected to a series of experiments whose arc-length Reynolds numbers ranged from approximately 13000 to 32000. …

Enhanced Post Deposition Annealing Conditions On The Fabrication Of High Quality Thermochromic Vanadium Dioxide Films, Nuru R. Mlyuka

Tanzania Journal of Engineering and Technology (TJET)

Sputter deposition of thermochromic VO2 thin films for smart window applications has been faced with several challenges including the need for high deposition temperature, extremely precise and narrow range of oxygen/argon flow ratio and target poisoning during sputtering. Deposition of VO2 at room temperature without oxygen followed by post-deposition annealing has been cited as one of the potential mitigations to the challenge. In this study, the effects of post-deposition annealing conditions on the structural, electrical and optical properties of VO2 thin films are reported. The films were prepared on soda lime glass substrates using DC magnetron sputtering of metallic vanadium …

Causes And Consequences Of Inefficient Drilling And Blasting In Mine Development Headings: A Case Study Of Hard Rock Gold Mining Operations In Northern Tanzania, George Bennett

Tanzania Journal of Engineering and Technology (TJET)

Despite the introduction of the perimeter blasting technique at the Tulawaka Gold Mine, the mine continued to suffer from an overbreak of mine development headings, with an average overbreak of 24% every 22 m, which is approximately twice the acceptable 10% overbreak. The causes of this problem include ineffective drilling practices and uneven and excessive charging of explosives, resulting in a slightly high powder factor of 3.94 kg/m3 instead of 3.8 kg/m3, as per the design. The problem of overbreak resulted in ore dilution, a longer mine development cycle time and additional costs of approximately US$ 45 per cut, especially …

Optimization Pump As Turbine Coupled To A Self-Excited Induction Generator Using Multi-Objective Genetic Algorithm, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

As a way of accelerating the deployment of affordable and clean renewable energy generation technologies, applying a pump working as a turbine coupled to a self-excited induction generator is gaining popularity in various areas including energy recovery and micro hydro systems. However, it is currently challenging to predict the performance of the PAT-SEIG system and there is no agreed-upon rule on the selection of the appropriate system to be installed at a particular site. This paper has presented multi-objective optimization to select the best operating point of the PAT-SEIG system. The results show that the peak efficiencies for the PAT …