Engineering Commons^™

Use Of Time-Domain Reflectometry To Characterize Thermal And Hydraulic Properties Of Unsaturated Sands, Xuelin Wang

Civil Engineering Dissertations - Archive

Unsaturated soil is an essential consideration for many geotechnical engineering fields, for example, soil bearing capacity, soil lateral earth pressure, slope stability analysis, and seepage-related problems. Thermal-hydro-mechanical (THM) processes govern the behavior of unsaturated soils. Therefore, it is critical to simultaneously measure soil moisture, density, and thermal properties to better study THM processes. A thermo-time-domain reflectometry (thermo-TDR) sensor, a dual-probe for both soil moisture and thermal properties, is improved (based on its previous design) and fully calibrated through various soils at different soil moisture circumstances. Nine different chemical reagents with known dielectric constant were utilized to perform calibration of the …

Evaluation Of The Use Of Anchorage Systems For Strengthening Concrete Members Reinforced By Fiber-Reinforced-Polymer (Frp) Laminate, Mai Abd Alrhman Alrhman Aljaberi

Civil Engineering Dissertations - Archive

An anchorage system is the most effective method for preventing or delaying the debonding of fiber-reinforced polymer laminates; however, despite extensive studies, the related design information is still unclear and limits its use. The goal of this research, therefore, is to investigate the parameters that affect the debonding strain of CFRP beams secured with different types of anchors. For this purpose, 34 small-scale beams were tested under four-point loading. Two (2) of them were control beams (no FRP, no anchors), 8 were strengthened with FRP at their tension sides, and the remaining 24 were secured with different types of anchor …

Improving Flood Forecasting Using Conditional Bias-Aware Assimilation Of Streamflow Observations And Dynamic Assessment Of Flow-Dependent Information Content, Haojing Shen

Civil Engineering Dissertations - Archive

Accurate forecasting of floods is a long-standing challenge in hydrology and water management. Data assimilation (DA) is a popular technique used to improve forecast accuracy by updating the model states in real time using the uncertainty-quantified actual and model-simulated observations. A particular challenge in DA concerns the ability to improve the prediction of hydrologic extremes, such as floods, which have particularly large impacts on society. Almost all DA methods used today are based on least squares minimization. As such, they are subject to conditional bias (CB) in the presence of observational uncertainties which often leads to under- and over-prediction of …

Investing In Bicycle Infrastructure To Spur Statewide Economic Growth Through Bicycle Tourism, Pedro Aguero Arroyo, Daniel P. Piatkowski, F. Alsaleem

Nebraska Department of Transportation: Research Reports

Bicycle tourism is a growing industry that has been shown by prior studies to contribute significantly to the economy of numerous states. The economic benefits of recreational bicycling are not limited to the direct effects of the transactions of bicyclists in related industries, but also spillover effects such as the reduction of automobile activity and its associated costs to society, or the decrease of the costs of obesity and inactivity to the healthcare system. This study focuses on the former and provides a qualitative and quantitative analysis of the economic impacts derived from recreational bicycling expenditure, as well as an …

A Big Data Approach For Improving Nebraska Cycling Routes, Fadi Alsaleem, Ali Al-Ramini, Mohammad Ali Takallou, Daniel P. Piatkowski

Nebraska Department of Transportation: Research Reports

More people are becoming interested in creating healthy lifestyle habits for themselves. It has been proved that cycling has several health benefits. Therefore, governments are planning towards more cycling-friendly infrastructures and environments. To understand the cycling activities in Nebraska, we analyze Strava data for the last three years, providing valuable insight into cycling activities for urban planning purposes.

We analyze commute and recreational cycling patterns varying between weekdays and weekends to identify peak hours. Moreover, we study the effect of weather on cycling activity patterns for the last three years. Also, we use the impact of the outside temperature as …

Utilizing Kryton Kim Technology In Bridge Deck And Rail Construction To Protect Against Chloride Ion Penetration, Mick Syslo, Wally Heyen, Lieska Halsey, David Hansen, Tim Kranson

Nebraska Department of Transportation: Research Reports

No abstract provided.

Best Practices To Address Issues Of Excess Aggregate Dust In Nebraska, Jiong Hu, Yong-Rak Kim, Temirlan Barissov, Shaya Gholami, Julia Grasley

Nebraska Department of Transportation: Research Reports

The negative impacts of an excessive amount of dust on concrete performance have been known and reported in different states. The extent and impact of dust on concrete performance, which depends not only on quantity but also on the nature of dust could be complicated. For example, clay coatings showed a more harmful impact on concrete performance compared with carbonates (limestone dust) or stone dust. While clays that weakly adhere to aggregate will be dispersed in the mixing water and could lead to the workability or air entrainment issues, clays that are strongly bonded to the aggregate surface will remain …

An Impedimetric Aptasensing System For The Rapid Detection Of Salmonella Typhimurium, America Sotero

Graduate Theses and Dissertations

Salmonella Typhimurium is a foodborne pathogen associated with raw and undercooked eggs, poultry, beef, fruits, and vegetables. In the United States, Salmonella is responsible for approximately 1.2 million illnesses, 23,000 hospitalizations, and 450 deaths annually. For many years, conventional detection methods such as culture-dependent and PCR-based methods have been the “golden standards” for the detection of this pathogen due to their high sensitivity and reliability. However, they still have some disadvantages such as long enrichment steps and high costs that need to be overcome. The development of a rapid and reliable method for the detection of S. Typhimurium is needed …

Fourier Transform Infrared Spectroscopy For The Measurement Of Gesn/(Si)Gesn, Solomon Opeyemi Ojo

Graduate Theses and Dissertations

Photoluminescence (PL) and Electroluminescence (EL) characterization techniques are important tools for studying the optical and electrical properties of (Si)GeSn. Light emission from these PL and EL measurements provides relevant information on material quality, bandgap energy, current density, and device efficiency. Prior to this work, the in-house PL set-up of this lab which involves the use of a commercially-obtained dispersive spectrometer was used for characterizing both GeSn thin film and fabricated devices, but these measurements were limited by issues bordering on low spectral resolution, spectral artifacts, and poor signal-to-noise ratio (SNR) thereby resulting in the possible loss of vital information and …

Design Of A 350 Kw Silicon Carbide Based 3-Phase Inverter With Ultra-Low Parasitic Inductance, Matthew Feurtado

Graduate Theses and Dissertations

The objective of this thesis is to present a design for a low parasitic inductance, high power density 3-phase inverter using silicon-carbide power modules for traction application in the electric vehicles with a power rating of 350 kW. With the market share of electric vehicles continuing to grow, there is a great opportunity for wide bandgap semiconductors such as silicon carbide (SiC) to improve the efficiency and size of the motor drives in these applications. In order to accomplish this goal, careful design and selection of each component in the system for optimum performance from an electrical, mechanical, and thermal …

Development And Characterization Of Metal Contacts For Graded Composition Ingan Solar Cells, Reem E. Alhelais

Graduate Theses and Dissertations

There is an increasing demand for high-power electronic components and optoelectronic devices with low-loss and high efficiency. III-nitride semiconductor materials have demonstrated great potential for high-power, high-frequency, and high-temperature applications because of their remarkable and wide-ranging electronic and physical properties. These material systems, including alloys of AlN, GaN, and InN, are currently being explored for their potential to develop efficient photovoltaic cells. They can potentially achieve higher efficiency because of their very high direct wide band edge, absorption coefficients, and resistance to defects. The compositionally graded Group III-nitride alloy allows access to a large range of energies by varying the …

Mechanical Characterization And Wear Behavior Of Aerospace Alloy Aa2124 And Micro B4c Reinforced Metal Composites, Fazil N, V Venkataraman, Madeva Nagaral

Journal of Metals, Materials and Minerals

In the present investigation, the mechanical and wear properties of aerospace alloy AA2124-9wt%of B4C composites were displayed. The composites containing 9wt% of micro boron carbidein AA2124 alloy were synthesized by liquid metallurgy method through stir casting. For the composites, reinforcement particles were preheated to a temperature of 400°Cand afterward added in ventures of two stages into the vortex of liquid AA2124 alloy compound to improve the wettability anddispersion. Microstructural examination was carried out by SEM and elemental investigation was finished by EDS. Mechanical and wear properties of as cast AA2124 alloy and AA214-9wt% of B4C composites were evaluated as per …

Effect Of Amorphous Rice Husk Silica Additionon The Structure Of Asphalt Composite, Simon Sembiring, Agus Riyanto, Rudy Situmeang, Zipora Sembiring, Nita Susanti, Iqbal Firdaus

Journal of Metals, Materials and Minerals

In this study, modified asphalt composites were produced by adding silica extracted from rice husk.The mass ratios of asphalt to silica are 1:0, 1:1.6, 1:1.8, and 1:2 and calcined at the temperature of 150C for 6 h.The structural and microstructural characteristics of asphalt composites were examinedby x-ray diffraction (XRD),Scanning Electron Microscopy/Energy Dispersive x-ray (SEM-EDX) Spectroscopy and Differential Thermal Analysis (DTA-TGA),respectively. The XRDstudy revealed that the major phases were carbon and amorphous silica. The surface morphology of asphalt without silica addition presents a cluster of larger size than the cluster of asphalt with an addition of silica. The addition of silica …

Transfer Of Learning For K-12 Stem Teachers: From The Gear Up Engineering Camp Professional Learning Experience To The Classroom, Ryan F. Barlow

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Because of the new Utah Science with Engineering Education (SEEd) standards, which are based on the Next Generation Science Standards (NGSS), Utah science teachers in K-12 schools are now being asked to incorporate engineering into their science classes. Many science teachers in the State of Utah do not have a background in engineering and have not received training in how to incorporate engineering into their classes. To help remedy this problem, six STEM teachers from the State of Utah, and one STEM teacher from Nevada, came to the campus of Utah State University in July 2019 to participate with a …

Examining The Role Of Spatial Skills And Mathematics Motivation On Middle School Mathematics Achievement, Kinnari Atit, Jason R. Power, Norma Veurink, David H. Uttal, Sheryl Sorby, Grace Panther, Camille Msall, Logan Fiorella, Martha Carr

Michigan Tech Publications, Part 1

Background: Spatial skills and mathematical ability have been repeatedly identified as critical for achievement in Science, Technology, Engineering, and Mathematics (STEM). Previous studies have identified correlations between spatial skills and mathematical achievement; however, questions remain regarding improvements in non-spatial areas associated with STEM achievement. The current study examined whether competency in spatial skills could be related to individuals’ motivation for mathematics. Measures of spatial skills and mathematics motivation were completed by 1056 seventh grade students. Results: Using hierarchical linear modeling, spatial skills and math motivation were examined relative to students’ performance on a state standardized mathematics subtest. Results indicate that …

Modern Standard Arabic Speech Recognition: Using Formants Measurements To Extract Vowels From Arabic Words’ Consonant-Vowel-Consonant-Vowel Structure, Mohamed Ali Alshaari

Theses and Dissertations

Arabic texts suffer from missing diacritics (short vowels) which become obstacles for new learners. Speech Recognition is the translation of words spoken to text through intelligent computer programs. As of today, it has been integrated into many computer systems. Arabic Speech Recognition has made progress over the years, but it is still not as good as English speech recognition due to the problem of short vowels not being recognized. This is mainly because the Arabic language is unlike the English language in the nature because it is a Semitic language. This is reflected in different characteristics such as grammar, morphology, …

Medical Knowledge-Enriched Textual Entailment Framework, Shweta Yadav, Vishal Pallagani, Amit P. Sheth

Publications

One of the cardinal tasks in achieving robust medical question answering systems is textual entailment. The existing approaches make use of an ensemble of pre-trained language models or data augmentation, often to clock higher numbers on the validation metrics. However, two major shortcomings impede higher success in identifying entailment: (1) understanding the focus/intent of the question and (2) ability to utilize the real-world background knowledge to capture the context beyond the sentence. In this paper, we present a novel Medical Knowledge-Enriched Textual Entailment framework that allows the model to acquire a semantic and global representation of the input medical text …

Transonic Small-Disturbance Theory/Integral Boundary Layer Airfoil Data For The Low-Fidelity Common Research Model, Jeffrey D. Taylor, Douglas Hunsaker

Browse all Datasets

Lift, Drag, and Moment Coefficient data for the Low-Fidelity Common Research Model wing airfoil sections.

Globally Optimal Passive Compliance Control For Tasks Having Multiple Homotopy Classes, Jacob J. Rice, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

Redundant serial manipulators with variable stiffness actuators (VSAs) are capable of passive compliance control, in which the elastic behavior of the end-effector is controlled for robust interaction with a stiff environment. This paper addresses the problem of finding the globally optimal joint manipulation path (sequence of joint positions and compliances) that yields a desired task manipulation path (sequence of end-effector positions and compliances) when there is one degree of redundancy. The space of admissible joint paths can be very complex, with multiple bifurcations resulting in multiple homotopy classes of joint paths. Bifurcations due to singularities in the combined kinematic and …

Carbon Sequestration By Reforesting Legacy Grasslands On Coal Mining Sites, James F. Fox, J. Elliott Campbell, Peter M. Acton

Civil Engineering Faculty Publications

Future carbon management during energy production will rely on carbon capture and sequestration technology and carbon sequestration methods for offsetting non-capturable losses. The present study quantifies carbon sequestration via reforestation using measurements and modeling for recent and legacy surface coal mining grasslands that are re-restored through tree planting. This paper focuses on a case study of legacy coal mining sites in the southern Appalachia the United States. This five million-hectare region has a surface mining footprint of approximately 12% of the land area, and the reclamation method was primarily grassland. The results of the soil carbon sequestration rates for restored …

Global Privacy Concerns Of Facial Recognition Big Data, Myranda Westbrook

Honors Theses

Facial recognition technology is a system of automatic acknowledgement that recognizes individuals by categorizing specific features of their facial structure to link the scanned information to stored data. Within the past few decades facial recognition technology has been implemented on a large scale to increase the security measures needed to access personal information. This has been specifically used in surveillance systems, social media platforms, and mobile device access control. The extensive use of facial recognition systems has created challenges as it relates to biometric information control and privacy concerns. This concern raises the cost and benefit analysis of an individual’s …

The Use Of Nanoparticles And Electrospun Fibers For Intravaginal Delivery To Treat Viral And Bacterial Infections And Electrophysiological Measurements Of Synthetic Chloride Channels., Farnaz Minooei

Electronic Theses and Dissertations

Female reproductive viral and bacterial infections affect millions of women worldwide. Given the diversity and magnitude of these unmet reproductive health challenges, topical administration of antiretrovirals (ARVs) and antibiotics have emerged as promising approaches to maintain and restore reproductive health. However, currently available intravaginal dosage forms often suffer from low user adherence and the need for frequent, daily administration to achieve therapeutic effect. To address these challenges, the broad goal of this research was to focus on the development of new localized nanoparticle (NP) and electrospun fiber dosage forms to prolong the delivery and enhance the efficacy of active agents …

Impacts Of Environmental And Hydrologic Factors On Urban Stream Water Quality., Jason Patrik Ingram

Electronic Theses and Dissertations

Urban streams can be impacted by a multitude of hydrologic and environmental factors, making maintaining these water sources difficult. Urbanization can exacerbate these impacts creating new challenges in preserving suitable urban stream water quality. Urbanization is the development of city landscape and suburban living within an otherwise natural region. For this environmental impact study, the effects of city development on urban stream water quality was monitored for Mill Creek in Louisville, Kentucky. To study the effects of urbanization on Mill Creek, this project was completed utilizing the BACI method for comparing impacts. The results of the water quality monitoring were …

Automatic Target Recognition With Convolutional Neural Networks., Nada Baili

Electronic Theses and Dissertations

Automatic Target Recognition (ATR) characterizes the ability for an algorithm or device to identify targets or other objects based on data obtained from sensors, being commonly thermal. ATR is an important technology for both civilian and military computer vision applications. However, the current level of performance that is available is largely deficient compared to the requirements. This is mainly due to the difficulty of acquiring targets in realistic environments, and also to limitations of the distribution of classified data to the academic community for research purposes. This thesis proposes to solve the ATR task using Convolutional Neural Networks (CNN). We …

Raman Spectroscopic Investigation Of The Speciation Of Uranyl (Vi) And Thorium (Iv) Ions In Chloride-Bearing Aqueous Solutions Under Hydrothermal Conditions, Nadib Akram

Graduate Theses/Dissertations

Raman spectra were acquired for a uranyl chloride aqueous solution at temperatures ranging from 25°C to 500°C at the chloride concentration of 6M and uranium (vi) concentration of 0.05M. The measurements were taken by sealing the sample in a hydrothermal diamond anvil cell (HDAC) which enabled spectra acquisition at non-ambient conditions. The pressure inside the cell was measured by estimating the liquid-vapor homogenization temperature (T_H) and using the isochoric equation of state diagram of water. The acquired spectra were then fitted to determine the speciation distribution of the various uranyl chloride species for the mentioned concentration. The developed …

Preparation And Characterization Of Dc Magnetron Sputtered Thin Films, Al Amin

Theses and Dissertations

Plasma enhanced DC magnetron sputtering is a well-known technique for thin film deposition. Thin film has wide range of applications in many fields such as electronics, optics, communication, decoration, biosystem and medical. Among them, antibacterial and biocompatible thin film coating has attracted researcher’s attention to prevent the healthcare-associated infections (HAIs) during the surgical operations as well as the implantation of foreign devices inside human body. This research has been divided into two sections. In first section, titanium (Ti) was deposited on glass substrate at DC power of 200 W, argon-nitrogen plasma, and temperature of 25 ˚C. Later this Ti-coated glass …

A Python-Based Brain-Computer Interface Package For Neural Data Analysis, Md Hasan Anowar

Theses and Dissertations

Anowar, Md Hasan, A Python-based Brain-Computer Interface Package for Neural Data Analysis. Master of Science (MS), December, 2020, 70 pp., 4 tables, 23 figures, 74 references.

Although a growing amount of research has been dedicated to neural engineering, only a handful of software packages are available for brain signal processing. Popular brain-computer interface packages depend on commercial software products such as MATLAB. Moreover, almost every brain-computer interface software is designed for a specific neuro-biological signal; there is no single Python-based package that supports motor imagery, sleep, and stimulated brain signal analysis. The necessity to introduce a brain-computer interface package that …

Performance And Efficiency Evaluation Of Stormwater Management Lids Using Pcswmm: Numerical Modeling And Sensitivity Analysis, Abdullah Al Fatta

Theses and Dissertations

Implementation of Low Impact Development systems (LIDs) can reduce the detrimental effects of urbanization. In this study, performance of both conventional drainage system and bioretention swales LID green infrastructure was assessed. Personal Computer Storm Water Management Model (PCSWMM) was used to investigate the performance by producing runoff hydrographs. Calibration and validation were conducted with independent storm events to minimize the gap between the simulated and observed outflow. Among different sensitive parameters, saturated hydraulic conductivity, suction head, percent initially saturated, Manning’s N for impervious area, were used in calibration. Each storm event resulted coefficient of determination (R2) values of 0.656 or …

Mono And Multi-Objective Optimization And Modeling Of Machining Performance In Face Milling Of Ti6al4v Alloy, Al Mazedur Rahman

Theses and Dissertations

Titanium alloys are extensively used in numerous industries like aerospace, automotive, military, etc., due to their exclusive characteristics. But machining these alloys has always been challenging for manufacturers. This research investigates the effect of radial depth of cut on cutting forces, tool life, surface roughness (Ra), and material removal rate (MRR) during face milling of Ti6Al4V alloy. It also aims to perform mono and multi-objective optimization of response characteristics to determine the optimal input parameters, namely cutting speed, feed rate, and radial depth of cut. Taguchi method and analysis of variance (ANOVA) have been used for mono-objective optimization, whereas Taguchi-based …

Tanzanian Concrete Masonry Walls, Edward J. Kaminski

Architectural Engineering

Walls that replicate masonry walls used in Tanzania are constructed and tested. The results from testing was compared with the respective predictions made using code guidelines from ASCE 7 and TMS 402.