Engineering Commons^™

A Survey On Security Applications With Smartnics: Taxonomy, Implementations, Challenges, And Future Trends, Serigo Elizalde, Ali Alsabeh, Ali Mazloum, Samia Choeiri, Elie Kfoury, Jose Gomez, Jorge Crichigno

Faculty Publications

Over the last decade, network applications have grown exponentially, demanding high-speed interconnects. Unfortunately, chip manufacturers are approaching the upper limits of silicon-based computing with slow improvements in computational performance and energy efficiency. This trend has forced the industry to shift paradigms, moving from monolithic architectures to heterogeneous, domain-specific designs. Moreover, the ever-evolving threats compromise digital services and demand more scalable and flexible solutions to ensure service continuity in production networks. Smart Network Interface Cards (SmartNICs) are a product of this new paradigm, integrating domain-specific engines and general-purpose cores to offload various network infrastructure tasks, including those related to security. This …

Enhanced Scratch Resistance Of Graphite Coating Using A Polydopamine Adhesive Underlayer, Adedoyin Abe, Min Zou

Mechanical Engineering Faculty Publications and Presentations

Graphite has great potential as a solid lubricant due to its low friction properties, but its poor adhesion to metal substrates limits its durability unless modified. This study explores the use of polydopamine (PDA), a bioinspired adhesive polymer, as an underlayer to enhance the adhesion and scratch resistance of graphite coatings applied to stainless steel (SS) substrates. Progressive load scratch tests were performed using a stainless steel ball counterface under normal loads ranging from 0.5 to 18 N. The PDA-modified coatings demonstrated significantly improved adhesion and durability, withstanding contact pressures up to 1.6 GPa without delamination or failure. In contrast, …

Utilization Of Ftir-Atr For Material Characterization And Forensic Analysis, Helmut Leodarta, Ahmed S. El-Ashwah, Punyaslok Rath, Magdy Abdelrahman, William G. Buttlar

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The growing use of chemical modifiers and additives in asphalt mixtures necessitates a reliable system for their identification and quantification, crucial for quality control, assurance, and forensic investigations. Fourier Transform Infrared (FTIR) spectroscopy offers a cost-effective method by analyzing the interaction of infrared light with chemical groups, producing distinct spectral fingerprints. This study evaluates 44 materials, including binders, warm mix additives (WMAs), rejuvenators, release agents, and concrete admixtures. It also assesses the ability of FTIR testing to identify and quantify chemical changes and aging in asphalt binders with rejuvenator addition. An Attenuated Total Reflectance (ATR) accessory was employed for practical …

Mechanical And Deformation Behavior Of Silt Reinforced With Wicking Geotextile: An Experimental Study, Yipeng Guo, Yiyong Xue, Yongjie Zhang, Wei Ruan, Yafeng Li, Xiong Zhang, Zhili Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Silt is widely utilized as a filling material in transportation construction, However, it frequently suffers from problems, such as excess pore water pressure buildup, settlement, and mud pumping. Wicking geotextiles have emerged as a sustainable solution by improving both drainage and reinforcement capacities, yet their optimal design parameters remain unclear. To address this gap, a series of tests were performed to investigate the effects of compaction degree, reinforcement configuration (number, spacing, position), and specimen geometry on the mechanical and consolidation of silt reinforced with wicking geotextiles. The results reveal that the failure mechanism of reinforced silt progresses through four distinct …

An Approach To The Mesostructure Sealing In Coal By Mine Water Clathrate, Haiyang Yi, Ze Li, Tao Yang, Zhuang Zhuo, Tingxiang Chu, Xianfeng Shi, Guang Xu

Mining Engineering Faculty Research & Creative Works

The sealing performance of coal mass is of significant importance for converting abandoned mines into geological repository. This study presents a novel approach to enhancing the sealing of the pore structure in coal seams, such a technique utilizes mined water as the primary substance and additive solution based crystalline. Sequent tests are implemented, including saturation test, ion chromatography test, permeability test and scanning electronic microscope observations. It was suggested that the produced crystalline decrease the porosity and permeability of the coal, with different crystal morphologies due to various ions of additive solutions. The produced rod-shaped crystals have the most remarkable …

Development And Characterization Of Pmma/Pvp Nanofiber-Loaded Bioactive Agents With Enhanced Breast Cancer Activity, Samar A. Salim, The British University In Egypt, Esraa Abdelazim, Marwa Abdel Aleem

Nanotechnology Research Centre

Breast cancer remains a leading cause of cancer-related mortality globally, driving the need for novel effective and less toxic therapeutic agents. This study explores the synthesis and characterization of bioactive compounds: 1-(4-methoxyphenyl)-N- (p-tolyl)methanimine (MPTI), N-(4-methylphenyl)benzamide (MPB), and 4-methyl-N-(p-tolyl)benzenesulfonamide (MTS), and their incorporation into a PMMA/PVP polymer matrix for potential anticancer applications. Morphological analysis of the PMMA/PVP-loaded agents via SEM depicts structural modifications in the PMMA/PVP nanofibrous matrix upon incorporation of the bioactive agents. The FTIR analysis of the synthesized compounds before and after loading into the 7PMMA:3PVP nanofibers reveals successful incorporation of MPTI, MPB, and MTS, with characteristic absorption bands …

Synthesis And Characterization Of Temperature- And Ph-Responsive Pia-B-Pnipam@Fe3O4 Nanocomposites, Swati Kumari, Cayla Cook, Fatema Tarannum, Erick Salvador Vasquez-Guardado, Olufemi Ogunjimi, Keisha B. Walters

Chemical and Materials Engineering Faculty Publications

Stimuli-responsive polymers (SRPs) have garnered significant attention in recent decades due to their immense potential in biomedical and environmental applications. When these SRPs are grafted onto magnetic nanoparticles, they form multifunctional nanocomposites capable of various complex applications, such as targeted drug delivery, advanced separations, and magnetic resonance imaging. In this study, we employed a one-step hydrothermal method using 3-aminopropyltrimethoxysilane (APTES) to synthesize APTES-modified Fe₃O₄ nanoparticles (APTES@Fe₃O₄) featuring reactive terminal amine groups. Subsequently, via two consecutive surface-initiated atom transfer radical polymerizations (SI-ATRP), pH- and temperature-responsive polymer blocks were grown from the Fe₃O …

Reduction-Driven Mobilization Of Structural Fe In Clay Minerals With High Fe Content, Anke Neumann, Luiza Notini, W. A.P.Jeewantha Premaratne, Drew E. Latta, Michelle M. Scherer

Michigan Tech Publications

Clay minerals contain significant amounts of Fe in their alumosilicate framework, and this structural Fe can be reduced and re-oxidized, constituting a potentially renewable source of reduction equivalents in sedimentary environments. However, dissolution and/or clay mineral transformations during microbial Fe reduction contradict this concept. Here, we investigate how Fe reduction and re-oxidation affect the propensity of Fe to be released from the clay mineral structure and use selective sequential extractions in combination with Mössbauer spectroscopy. Negligible amounts of Fe were released in the sequential extraction of high Fe content clay minerals NAu-1 and NAu-2. Once aqueous Fe(II) was added as …

Unveiling Degradation Patterns In Dye-Sensitized Solar Cells: A Machine Learning Perspective, Ahmed Alali, Mahmoud Ashraf, Ahmad Muhammad, Sameh O. Abdellatif

Electrical Engineering

This study examines the time-dependent degradation of dye-sensitized solar cells (DSSCs) by systematically investigating several critical parameters, including TiO2 thickness, porosity, dye concentration, and iodine-based electrolyte concentration. We developed a novel figure of merit (FOM) to quantify the degradation rates, utilizing a finite element model (FEM) in COMSOL to simulate performance over time. 400 DSSC samples were fabricated, resulting in a comprehensive dataset comprising over 228,000 data points derived from experimental results and simulations. The findings reveal that PCE declines significantly over time, with an average initial efficiency of 4.0% for the DSSCs, dropping to approximately 0.5% after 360 h. …

Deployable Systems Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

What Are Mechanisms?

• Moving Mechanical Assembly (MMA)

• A device that controls the movement of a deployable or other movable system of a space or launch vehicle

• Why do mechanisms exist?

• 1) Fit within launch vehicle or dispenser
• 2) Stow for launch loads
• 3) Change position or pointing once on orbit
• 4) Deploy objects

Leveraging Oxygen Mobility With Zirconia In Low-Temperature Plasma For Enhanced Methane Reforming To Syngas, Fnu Gorky, Levy Pile, Grace Jones, Apolo Nambo, Mourad Benamara, Maria L. Carreon

Chemical Engineering Faculty Publications and Presentations

Despite extensive efforts to optimize the single-step production of syngas, hydrocarbons, and oxygenates via plasma catalysis, several challenges remain unresolved. In particular, understanding the various reaction pathways is hindered by the complexity of the reactions and the diverse range of chemical products formed. In this study, our main objective is to evaluate and compare the influence of zirconia on reaction pathways, methane (CH4) and carbon dioxide (CO2) conversions (%), and syngas selectivity (%) relative to the plasma-only route. Experiments were conducted at a low radio-frequency plasma power of 50 Watts without external heating. The results demonstrated significantly enhanced conversions of …

Summary Of: Immersive Modeling Of Water Banking Elicits Local Knowledge And Strategies To Get More Water To Great Salt Lake, Hadia Akbar, David E. Rosenberg

Civil and Environmental Engineering Student Research

Getting more water to the declining Great Salt Lake (GSL) is difficult. Strategies must address complex water rights, competing water needs, differing stakeholder priorities, historical legacies, lack of trust, and more arid and variable hydrology. Here we used immersive online collaborative modeling to explore water banking strategies to get more water to GSL. This 2-page brief describes the immersive modeling method, a Win-Win outcome, key results, new insights collaborators took from a model session, 2 new strategies to deliver water to GSL, and 3 next steps.

Native Plants For Green Roofs In The Midwest, Katerina Mcsweyn

Rose-Hulman Undergraduate Research Publications

No abstract provided.

Dice Math And Probability, Warren Campbell

SEAS Faculty Publications

The manufacture of dice for tabletop games is a billion-dollar industry. In gaming circles and online forums, the concept of “cursed dice” is a popular topic. Dice are inherently unfair due to the difficulty of manufacturing them with perfect geometric tolerances and uniform material densities. A common method for testing dice fairness is the chi-square statistic, which is typically assumed to follow the chi-square distribution. However, this assumption is only asymptotically valid.

Exact distributions of the statistic can be computed for dice with few sides and a limited number of rolls—such as 2-sided (D2) and 4-sided (D4) dice—but the computational …

3d Solid Models, Bradley M. Ratliff

Model Desert Terrain Monochromatic DoT Dataset

3D solid models for model vehicles, target panels, objects, and the desert terrain model in STL file format.

Ground Truth Images, Bradley M. Ratliff

Model Desert Terrain Monochromatic DoT Dataset

Laboratory and scenario ground truth images for the Model Desert Terrain Monochromatic DoT dataset.

Modeling Framework To Quantify And Gauge Project Cost Risks Due To Construction Material Price Volatilities Using Predictive Probabilistic Deep-Learning Algorithms And Stochastic Risk Modeling, Yasser Jezzini, Rayan H. Assaad, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Material price fluctuations pose significant challenges for executing construction projects and adhering to budgetary estimates. Existing research studies focused on forecasting construction material prices rather than quantifying and gauging overall project cost risks related to price volatilities, and they relied on traditional time-series forecasting methods that are incapable of offering full probabilistic distributions of price fluctuations and of providing a comprehensive assessment of risk uncertainties associated with material price fluctuations. This paper addresses these gaps by developing an integrated framework to quantify and gauge project risks due to construction material price volatilities. The framework's validity and practicality were demonstrated using …

Groundwater Flooding On Highways In The Nebraska Sandhills: Applying Remote Sensing, Precipitation And Groundwater Modeling To Determine Depth, Cause And Frequency, Aaron R. Mittelstet

Nebraska Department of Transportation: Research Reports

Climate change significantly impacts infrastructure sustainability, particularly through shifts in precipitation patterns, intensity, and duration. These precipitation dynamics may increase the occurrence of surface water and groundwater flooding. Groundwater in the Nebraska Sand Hills (NSH), including the thickest portions of the High Plains Aquifer, extends close to the land surface in interdunal areas, making the NSH vulnerable to groundwater flooding. Recent events involving heavy precipitation, snow melt, and rising groundwater levels have caused prolonged highway flooding, disrupting transportation networks. This study estimates groundwater flood inundation depth, duration and frequency in the highways of NSH using remote sensing techniques and groundwater …

Asl File Reader (Matlab), Bradley M. Ratliff

Source Code

This zip file contains the necessary files for reading binary ASL data and reading and parsing ASL header file metadata in MATLAB.

Polarimetric Data: Scenario 01, Bradley M. Ratliff

Model Desert Terrain Monochromatic DoT Dataset

Polarimetric data Scenario 01 collected within the Automated Remote Sensing Solar Simulation Lab at the University of Dayton. The data were collected using a visible monochromatic division-of-time imaging polarimeter. The dataset is parameterized across different sensor, scene, and illumination geometries that mimic outdoor solar irradiance conditions.

Ftir Characterization Of Asphalt Sara Fractions In Response To Rubber Modification, Mohyeldin Ragab, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt–rubber binders (A-RBs) have a long and deep history of use; however, little is known regarding the interrelated chemical behaviors and miscibility of rubber with the asphalt fractions [saturates, aromatics, resins, and asphaltenes (SARA)]. This study comprehensively attempted to address this knowledge deficiency by employing Fourier transform infrared spectroscopy (FTIR) to investigate the chemical evolution of A-RBs. A-RB interacted at 190 °C and 3000 min⁻¹ for 8 h was deemed to have the optimal rheological performance. FTIR of the liquid fractions of A-RB 190–3000 showed a prominent chemical shift in the SARA fractions, with new peaks that showed rubber …

Application Of Polymer Nanocomposites In The Design Of Prosthetic Sockets That Feature Auxetic Meta-Structures, Sumit Suryakant Kolte, Vinayak Vijayan, Lihua Lou

Publications

This research evaluates the response of prosthetic sockets constructed using polymer nanocomposites and incorporating auxetic meta-structures. The prosthetic sockets feature lightweight meta-structures between the inner and outer walls of the socket. Three different prosthetic designs featuring chiral, reentrant hexagon, and honeycomb meta-structures are evaluated in this study. The prosthetic sockets were designed in SolidWorks and compared using finite element analysis. The polymer nanocomposites used in this study include polypropylene and ultra-high molecular weight polyethylene containing uniformly distributed inclusions of either titanium dioxide, zinc oxide, or graphene nanoplatelets. Our results show a favorable pressure profile at the interface between the prosthetic …

Characterization Of The Effects Of Waste Mullite Powder On Seawater Sea Sand Cementitious Materials, Xiao Sun, Zehui Zhou, Wenjie He, Yudong Bi, Yao Wang, Hengrui Liu, Rui Zhong, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Maintaining the durability of coastal concrete structures while reducing construction costs remains a formidable challenge. Drawing inspiration from the volcanic concrete used by ancient Greeks and Romans, this study explores the feasibility of using waste mullite powder (WMP) with a high alumina content in seawater sea sand concrete to conserve natural resources and enhance durability. The experimental results demonstrate that the incorporation of seawater and WMP exerts detrimental impacts on the flow characteristics and workability of cementitious composites. While the sulfate content in seawater and sea sand can bolster the early strength of sea sand seawater concrete, sulfate attack compromises …

Geophysical Tools For Agricultural Management: Trends, Challenges, And Opportunities, Sophia Becker, Trenton Franz, Yufeng Ge, Joe Luck, Derek M. Heeren

School of Natural Resources: Faculty Publications

Agrogeophysics is a convergence of proximal soil sensing and hydrogeophysics in which geophysical methods are used to describe soil patterns and dynamics that shape agronomic management (including precision agriculture). To fully realize its potential for optimizing agricultural production, current barriers and targets for future agrogeophysics research must be identified. In this review, we compare the trajectory of agrogeophysics within peer-reviewed literature, patents, and the US university extension literature and examine the current challenges and opportunities for supporting agricultural production and sustainability with agrogeophysical tools. We conducted a repeatable search of Web of Science and Scopus for seven geophysical methods (electromagnetic …

Geopolymer Clsm With Off-Specification Fly Ash And Bottom Ash: A Sustainable Approach To Hazardous Waste Utilization, Alexis K. Vandomelen, Ahmed A. Gheni, Eslam Gomaa, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Conventional controlled low-strength material (CLSM) is a self-consolidating cementitious material with high flowability and low strength, traditionally composed of cement, sand, and water. This study explores the sustainable utilization of off-specification fly ash (OSFA) and bottom ash (BA), classified as industrial by-products with potential environmental hazards, to develop eco-friendly geopolymer CLSM as an alternative to conventional CLSM. Sodium hydroxide (NaOH) was used as an alkali activator to stabilize and solidify both two-part (liquid NaOH) and one-part (solid NaOH pellets) geopolymer CLSM mixtures. These mixtures were evaluated based on flowability (ASTM D6103-17) and compressive strength (< 300 psi per ACI Committee 229 guidelines for excavatability). A cost analysis was also conducted. The results demonstrated that incorporating OSFA as a cement replacement increased water demand by 15% to meet flowability requirements, while BA substitution for sand led to segregation challenges requiring mixture adjustments. For two-part mixtures, higher carbon content in OSFA necessitated an increased water-to-fly ash ratio. All self-consolidating mixtures exhibited 1-day compressive strengths ranging from 5 psi (0.03 MPa) to 87 psi (0.6 MPa). One-part mixtures showed a 1% to 34% reduction in 7-day compressive strength compared to two-part mixtures, improving excavatability. Increasing the BA-to-OSFA ratio from 1:1 to 3:1 reduced water demand due to lower surface area but increased the NaOH/OSFA ratio. This study highlights the potential of geopolymer CLSM to reduce costs by up to 94% at current NaOH prices (USD 6 per cubic yard) while repurposing hazardous industrial by-products, offering a cost-efficient, sustainable, and environmentally responsible solution for CLSM production.

Mission Engineering Competencies Workshop Report: Roles, Responsibilities, And Skills, James D. Moreland, Jr. (Editor), Thomas Irwin, Robert-Allen Baker

Center for Mission Engineering (CME) Publications

This report summarizes the findings of a two-day Old Dominion University Mission Engineering Workshop involving the U.S. Navy, U.S. Marine Corps, U.S. Air Force, National Aeronautics and Space Administration, the University of New South Wales, and Old Dominion University, focused on defining the roles, competencies, and skills essential to Mission Engineering. It presents a structured competency framework and offers recommendations to guide workforce development, training, and cross-agency collaboration in support of complex, mission-driven systems.

Aeolus-Ds: Dust-Aware Ai Decision Support For Coccidioidomycosis (Valley Fever) — A Design Science Research Framework Integrating Aerosol Remote Sensing, Land Disturbance, And Clinical Sentinel Signals, Harsha Sammangi, Aditya Jagatha, Harshini Balaga

Research & Publications

This paper presents Aeolus-DS, a design science research (DSR) artifact that integrates aerosol remote sensing (MAIAC AOD; dust fraction), mesoscale meteorology and soil moisture (ERA5), land-disturbance telemetry (construction, off-road vehicle activity, nightlights) and clinical sentinel signals (syndromic ED chief complaints, pneumonia rule-out) into a dust-aware, AI-driven early warning and decision-support system for Coccidioidomycosis (Valley Fever). Methodologically, we propose a graph spatiotemporal transformer with direction-aware attention and physics-guided regularisation reflecting aeolian transport. Using county-week panels (2014-2024) for the U.S. Southwest (AZ–CA–NV), Aeolus-DS improves now-casting mean absolute error (MAE) by 18% and two-week area under precision-recall curve (AUPRC) by 21% over …

Dataset Description, Bradley M. Ratliff

Model Desert Terrain Monochromatic DoT Dataset

Polarimetric dataset containing data collected within the Automated Remote Sensing Solar Simulation Lab at the University of Dayton. The data were collected using a visible monochromatic division-of-time imaging polarimeter. A model desert terrain model was constructed and imaged for eight different scenarios consisting of different model panel and vehicle targets. The dataset is parameterized across different sensor, scene, and illumination geometries that mimic outdoor solar irradiance conditions.

Improving The Efficiency Of Wells Turbines In Wave Energy Harvesting Using Computer Simulations, Godfred Abotar-Aidoo, Isaac Plange

ASPIRE 2026

Oscillating Water Columns (OWCs) are among the most promising wave energy converters for harnessing renewable power from ocean waves. These systems use a bi-directional airflow to drive a Wells turbine connected to a generator. However, the turbine’s efficiency is limited by flow separation and stall at high angles of attack. To address this, we investigated the effect of passive flow control by adding stability strips along the suction side of the turbine blades. The unsteady Reynolds-Averaged Navier–Stokes (RANS) equations, coupled with the k–ω SST turbulence model, were solved in ANSYS CFX 2025 R1 to evaluate the aerodynamic performance. Non-dimensional performance …

Nasa Design And Analysis Of Pegda Hydrogels For Microgreen Cultivation In Space, Kelly Wu, Gabriel Antigua, Artur Abramyan

Publications and Research

With the growth of the space economy worldwide, sustainable and soil-less food systems for long-duration space missions become increasingly important. In this study, Polyethylene Glycol Diacrylate (PEGDA) hydrogels were experimented with as a biocompatible medium in arugula microgreen growth without utilizing soil. Among the most considerable challenges was the fact that the plants' root growth exceeded the hydrogel capacity, which caused seedling dislodgment and starvation. To combat this, computer-aided design (CAD) was utilized to 3D print different mold designs to try and control root development further. The most promising of these designs were coil and tree-branch molds, promoting lateral or …