Engineering Commons^™

Stokes-Dependent Droplet Collection Efficiency On A Naca 0012 Airfoil From Droplet-Informed Simulations With Statistical Overloading, Arash Shad, Hashnayne Ahmed, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

Accurate modelling of ice accretion on aircraft wings requires analysing droplet impingement on the surface to optimize the design of ice-protection systems. We perform Euler–Lagrange simulations of a droplet-laden flow impinging on a NACA 0012 airfoil. Our study includes water droplets with eight discrete sizes ranging from 1 to 160 microns. We vary the free-stream velocity of the incoming airflow in the range 60≤⁢𝑈≤⁢240 m s−1 and the chord length of the airfoil in the range 0.5≤⁢𝑐≤⁢2 m. Due to the dilute nature of supercooled clouds, one-way coupling is used in the simulations. The effects of droplet breakup and collision …

A Rigorous Framework For An Improved Messinger/Myers Model Of Ice Accretion Under Conditions Of Variable Property And Unsteady Aircraft Icing, Hashnayne Ahmed, Arash Shad, ‪Nadim Zgheib, S. A. Sherif, S. Balachandar

Mechanical Engineering Faculty Publications

We analyse the Messinger/Myers model by critically evaluating simplifying assumptions through a rigorous formulation of the rime ice accretion process. We explore the effects of both constant and variable ice density and thermal conductivity, along with the effects of sublimation from the ice surface. The effects of key factors such as droplet impact rate, ambient temperature relative to the freezing temperature and the temperature difference between the ambient air and the airfoil surface are examined. Under these varying conditions, the present rigorous formulation is used to assess the significance of unsteady effects, variable ice properties and sublimation. We observe that …

Numerical Simulation Of Frost Formation And Heat Transfer On Fin-And-Tube Heat Exchangers In Turbulent Cross-Flow, Mahsan Farzaneh, ‪Nadim Zgheib, S. Balachandar, S. A. Sherif

Mechanical Engineering Faculty Publications

Frost formation in fin-and-tube heat exchangers in turbulent cross-flow presents significant challenges in industrial refrigeration applications, affecting heat transfer efficiency and operational reliability. The purpose of this work is to investigate frost deposition and growth on a staggered bank of a fin-and-tube freezer coil under turbulent forced convection conditions. The focus here is on investigating conditions that closely replicate real-world scenarios in large walk-in industrial freezers. Using a direct numerical simulation approach, we examine the flow dynamics and thermal behaviour in the presence of frost, considering turbulent regimes characterized by a Reynolds number in the range 1050≤𝑅⁢𝑒𝐷,avg≤4800, with the characteristic …

An Acoustofluidic Device For Sample Preparation And Detection Of Small Extracellular Vesicles, Jessica F. Liu, Jianping Xia, Joseph Rich, Shuaiguo Zhao, Kaichun Yang, Brandon Lu, Ying Chen, Tiffany Wen Ye, Tony Jun Huang

Faculty Publications

Small extracellular vesicles (sEVs) have emerged as powerful vectors for liquid biopsy, offering a noninvasive window into the dynamic physiological and pathological states of the body. However, to fully leverage the clinical potential of sEV biomarkers, it is imperative to develop robust and efficient technologies for their isolation and analysis. In this study, we introduce a novel sharp-edge acoustofluidic platform designed for rapid and effective sample preparation, coupled with sensitive detection of specific sEV populations based on their surface markers. Our approach utilizes acoustically activated sharp-edge microstructures to concentrate bead-bound sEVs within the microfluidic device, facilitating immediate visualization by fluorescence …

Enhancing Winter Climate Simulations Of The Great Lakes: Insights From A New Coupled Lake–Ice–Atmosphere (Cliav1) System On The Importance Of Integrating 3d Hydrodynamics With A Regional Climate Model, Pengfei Xue, Chenfu Huang, Yafang Zhong, Michael Notaro, Miraj Kayastha, Xing Zhou, Chuyan Zhao, Christa Peters-Lidard, Carlos Cruz, Eric Kemp

Michigan Tech Publications

The Laurentian Great Lakes significantly influence the climate of the Midwest and Northeast United States due to their vast thermal inertia, moisture source potential, and complex heat and moisture flux dynamics. This study presents a newly developed coupled lake–ice–atmosphere (CLIAv1) modeling system for the Great Lakes by coupling the National Aeronautics and Space Administration (NASA) Unified Weather Research and Forecasting (NU-WRF) regional climate model (RCM) with the three-dimensional (3D) Finite Volume Community Ocean Model (FVCOM) and investigates the impact of coupled dynamics on simulations of the Great Lakes’ winter climate. By integrating 3D lake hydrodynamics, CLIAv1 demonstrates superior performance in …

Bonding Ss316l And In625 Through Laser Powder Bed Fusion And Directed Energy Deposition: A Comparative Tensile Analysis, Christopher J. Bettencourt, Nadia Kouraytem

Mechanical and Aerospace Engineering Student Publications and Presentations

Directed Energy Deposition (DED) was used to deposit Inconel 625 (IN625) onto 316L stainless steel (SS316L) substrates fabricated by Laser Powder Bed Fusion. Tensile properties of the resulting multi-material specimens were compared to those of the individual alloys. Two bonding approaches were evaluated: a direct transition and a 50/50 intermediate layer formed by blending equal parts of each alloy during deposition. The multi-material specimens demonstrated higher yield strength than the single alloys. However, samples with the 50/50 transition exhibited brittle failure at the joint, whereas the direct transition behaved more ductile. Scanning Electron Microscopy revealed microcracks at the interface of …

Vibration-Based Detection For The Monitoring Of Neonatal Bcpap Respiratory Support To Minimize Duration Of Disconnections, Kaitlyn G. Calabresi, Meera R. Bhat, Lavinia L. Kong, Eli J. Foster, Jonathan Wang, Sangeeta Koilada, Angela Mak, Aastha Kapadia, Niam Mohseni, W. Keith Leung, Suneetha Desiraju, Constanza Miranda

School of Medicine Faculty Publications

Bubble continuous positive airway pressure (bCPAP) is a minimally invasive respiratory support for neonates experiencing respiratory distress syndrome (RDS). It exerts continuous, oscillatory air pressure to encourage lung function and development. Neonates’ movement may cause disconnections at the nasal interface. These disconnections are characterized by the cessation of bubbling at the bCPAP respiratory circuit output and frequently go unnoticed until hypoxia develops. Common Neonatal Intensive Care Unit (NICU) bCPAP systems lack a built-in alarm or accessory device to monitor for disconnections. As a result, nursing personnel must exercise extreme caution utilizing current bCPAP procedure. If a neonate is disconnected, it …

Digital Twins For Circular Economy Optimization: A Framework For Sustainable Engineering Systems, Shubham Gupta

Harrisburg University Other Works

This paper introduces sustainable engineering systems built using digital twin technology and circular economy principles. This research presents a framework for monitoring, modeling, and making decisions in real timusing virtual replicas of physical products, processes, and systems in product lifecycles. A digital twin was used to show that through a digital twin, waste was reduced by 27%, energy consumption was reduced by 32%, and the resource recovery rate increased to 45%. The proposed approach under the framework employs various machine learning algorithms, IoT sensor networks, and advanced data analytics to support closed-loop flows of materials. The results show how digital …

H2-Rich Biogas Production From Fixed Bed Wheat Straw Pyrolysis And The Potential Of Produced Biochar As H2 Storage Material, Tawanda Matamba, Hussein Rasool Abid, Alireza Keshavarz, Stefan Iglauer

Research outputs 2022 to 2026

H2 is a clean energy source, and is targeted as one of the ways to transition from fossil fuels. However, there are drawbacks in production and storage of hydrogen. To cover the supply, we need H2 from many resources and because of its low density we need materials that can store bulky quantities of H2. Here we investigated the potential of a renewable source (waste wheat straw) to produce and store H2 through pyrolysis and adsorption. The impact of pressure and temperature (500–900 °C, and 1.01–30 bar range) on the selectivity of H2 rich gas production was systematically investigated; and …

Isolation Enhancement Based On Tm010 And Te30 Mode Characteristics In A Patch Antennas Using Genetic Algorithm Optimization For Ku-Band Applications, Muddineni Raveendra, U. Saravanakumar, P. Padmaloshani, P. Saam Prasanth Dheeraj, Anand Anbalagan, R. Sreelakshmy

Electrical and Computer Engineering Faculty Publications and Presentations

This paper proposes a novel technique to enhance isolation in rectangular patch antennas by leveraging the mode characteristics of TM010 and TE30 to achieve better than −40 dB between the transmitter and receiver with dual‐polarization features. The primary innovation of this work lies in achieving significant isolation enhancement solely by combining two resonant modes with orthogonal polarizations, without incorporating any additional design elements such as parasitic components or decoupling structures. To validate the isolation enhancement based on these mode characteristics, a pair of rectangular transmitter and receiver patch antennas was designed to operate in the frequency range from 14 to …

Research On Node-Improved Energy Dissipation Wear Model For Fretting Fatigue Prediction In Railway Press-Fit Shaft, Hang Wang, Lijun Zhang, Weijian Zhang, Hongtao Li, Hong Chi, Kai Yang, Jixu Zhou, Li Ai

Civil Engineering Faculty Publications

As a key component of the traveling system of high-speed trains, the axle is crucial for its safe operation. The current research on the fretting wear and fatigue development of shafts suffers from the problems of low local simulation accuracy of the wear model and the lack of detection and validation methods for the dynamic expansion of wear and fatigue. To this end, this study firstly proposes a new node-improved form of energy dissipation wear model, which is more sensitive to the contact behavior of the asperity body in the overfilled region and the energy transfer process; it exhibits wear …

Wind Tunnel Model Of The Jack Rabbit Ii Field Experiments In The Mock Urban Array: Part 2. Approach Wind Conditions And Particle Image Velocimetry Measurements Of Simulated Chlorine Releases, Paulo V. Lopez, Thomas O. Spicer, Chad T. Smith

Chemical Engineering Faculty Publications and Presentations

The Jack Rabbit II (JR-II) Mock Urban Environment field test was reproduced in a 1:50 scale physical model in the wind tunnel at the Chemical Hazards Research Center of the University of Arkansas. The agreement of the approaching wind characteristics between field test and model was verified using 3D Laser Doppler Velocimetry (LDV). 2D Particle Image Velocimetry (PIV) tests were conducted in the model to obtain velocity measurements in the MUE. Velocity measurements taken before and during a simulated chlorine release were compared. PIV results show the general flow complexity in the last rows of the MUE and the impact …

The Relative Importance Of Wind And Hydroclimate Drivers In Modulating Wind-Blown Dust Emissions In Earth System Models, Xinzhu Li, Longlei Li, Yan Feng, Xin Xi

Michigan Tech Publications

Windblown dust emissions are subject to large uncertainties in Earth system models (ESMs), yet model discrepancies in dust variability and its physical drivers remain poorly understood. This study evaluates the consistency of 21 ESMs in simulating the climatological distribution and interannual variability of global dust emissions and applies dominance analysis to quantify the relative influence of near-surface wind speed and five hydroclimate variables (precipitation, soil moisture, specific humidity, air temperature, leaf area index) across different climate zones. In hyperarid regions, the models exhibit poor agreement in dust variability, with only 10 % of pairwise comparisons showing significant positive correlations. Most …

Exploring The Effect Of Led-To-Photodetector Spacing On Subcutaneous Photoplethysmography For Continuous Blood Pressure Measurement, Dario Cabal, Brian Nguyen, David B. Green, Kevin Kilgore, Varun Thakkar, Michael J. Fu, Steve J. Majerus

Student Scholarship

Photoplethysmography (PPG) is widely used to measure heart rate, blood oxygenation, and more recently, blood pressure. Implanted PPG systems offer the possibility to measure similar real-time measures of cardiovascular health, however, the detection method may vary due to a lack of capillary vessels for PPG sensors to observe in muscle tissue. To improve volumetric blood detection in large muscles, without relying on the capillary density of skin, a flexible PPG sensor was developed. The sensor included multiple spacing of illuminating infrared (IR) light emitting diodes (LEDs) and a single IR photodetector. This arrangement was expected to enable detection of blood …

The Potential Of Microbial Fuel Cells As A Dual Solution For Sustainable Wastewater Treatment And Energy Generation: A Case Study, Shajjadur Rahman Shajid, Monjur Mourshed, Md. Golam Kibria, Bahman Shabani

Mechanical and Aerospace Engineering Student Publications and Presentations

Microbial fuel cells (MFCs) are bio-electrochemical systems that harness microorganisms to convert organic pollutants in wastewater directly into electricity, offering a dual solution for sustainable wastewater treatment and renewable energy generation. This paper presents a holistic techno-economic and environmental feasibility assessment of largescale MFC deployment in Dhaka’s industrial zone, Bangladesh, as a relevant case study. Here, treating 100,000 cubic meters of wastewater daily would require a capital investment of approximately USD 500 million, with a total project cost ranging between USD 307.38 million and 1.711 billion, depending on system configurations. This setup has an estimated theoretical energy recovery of 478.4 …

Analysis Of A Saline Dust Storm From The Aralkum Desert - Part 1: Consistency Between Multisensor Satellite Aerosol Products, Xin Xi, Jun Wang, Zhendong Lu, Andrew M. Sayer, Jaehwa Lee, Robert C. Levy, Yujie Wang, Alexei Lyapustin, Hongqing Liu, Istvan Laszlo, Changwoo Ahn, Omar Torres, Sabur Abdullaev, James Limbacher, Ralph A. Kahn

Michigan Tech Publications

The Aralkum Desert presents a challenging environment for satellite aerosol observations due to its very bright, heterogeneous, and dynamic surfaces and the lack of in situ constraints on region-specific aerosol properties. We survey current global satellite algorithms capable of detecting the presence, column burden, and elevation of airborne dust over the Aral Sea basin. Discrepancies and potential biases in retrieved UV aerosol index (UVAI), mid-visible and thermal infrared optical depth (AOD), and layer height due to different assumptions on surface and aerosol properties are assessed. The results indicate that (1) UVAI products consistently delineate dust plume extent but show large …

Conceptualizing The Research Cycle For The Field Of Materials Science And Engineering, Jennifer L.W. Carter

Faculty Scholarship

Abstract: Early-career materials researchers often receive guidance from their individual advisors on best practices for conducting research, but the materials science community lacks an explicit model of the research process. As a result, the lived experience of an individual researcher can be quite different from their peers since they may be exposed to a different unique set of implicit research steps. In this article, we translate an existing research heuristic from other fields and make explicit the steps, methodologies, and strategies materials science engineering researchers utilize to advance our collective materials science knowledge. This newly proposed research cycle can improve …

Conceptualizing The Research Cycle For The Field Of Materials Science And Engineering, Jennifer Carter

Faculty Scholarship

Early-career materials researchers often receive guidance from their individual advisors on best practices for conducting research, but the materials science community lacks an explicit model of the research process. As a result, the lived experience of an individual researcher can be quite different from their peers since they may be exposed to a different unique set of implicit research steps. In this article, we translate an existing research heuristic from other fields and make explicit the steps, methodologies, and strategies materials science engineering researchers utilize to advance our collective materials science knowledge. This newly proposed research cycle can improve the …

Impactor Displacement As A Predictor Of Thoraco-Abdominal Organ Injury: Comparison Of Isolated Organ To Whole Body Tests, Jack Seifert, Jared Michael Koser, Alok Shah, Lance Frazer, Frank A. Pintar, Narayan Yoganandan, Dan Nicolella, Timothy B. Bentley, Brian D. Stemper

Biomedical Engineering Faculty Research and Publications

Purpose

Body armor is used to protect the wearer from penetrating injuries. However, when the armor defeats the projectile, it deforms at high rates into the wearer, referred to as back face deformation (BFD). This deformation can cause a variety of superficial and internal injuries and consequently should be considered when designing body armor. However, current design standards do not adequately consider the effects of BFD, and new data are necessary to inform future design thresholds for BFD. The objective of this study was to develop blunt impact injury risk curves for in vitro thoraco-abdominal organs and determine their applicability …

Explicit Bounds And Parallel Algorithms For Counting Multiply Gleeful Numbers, Sara Moore, Jonathan P. Sorenson

Computer Science and Software Engineering

Let k ≥ 1 be an integer. A positive integer n is k-\textit{gleeful} if n can be represented as the sum of kth powers of consecutive primes. For example, 35=2³+3³ is a 3-gleeful number, and 195=5²+7²+11² is 2-gleeful. In this paper, we present some new results on k-gleeful numbers for k > 1.

First, we extend previous analytical work. For given values of x and k, we give explicit upper and lower bounds on the number of k-gleeful representations of integers n ≤ x.

Second, we describe and analyze two new, efficient parallel …

The Rise Of Foss In India: Empirical Evidence And Insights From Cross-Sectoral Case Studies, Arul George Scaria, Suryaprakash Mishra, Shubham Shinde, Rashi Singhal

Research Reports

The report analyses the adoption of FOSS in India, primarily through case studies across four sectors (healthcare, education, finance, and software and IT services) and different types of organisations (start-ups, non-profits, medium, large, and public sector organisations). The study highlights both the benefits and challenges experienced by organisations using FOSS. The study illustrates that while organisations benefit from increased innovations, cost/ time savings, flexibility, and enhanced security, they also face challenges such as lack of enough skilled personnel and limited community support. Organisations are also seen taking a cautious approach to licensing, favouring permissive licenses over restrictive ones. Based on …

The Rise Of Foss In India: Empirical Evidence And Insights From Cross-Sectoral Case Studies, Arul George Scaria, Suryaprakash Mishra, Shubham Shinde, Rashi Singhal

Research Reports

The report analyses the adoption of FOSS in India, primarily through case studies across four sectors (healthcare, education, finance, and software and IT services) and different types of organisations (start-ups, non-profits, medium, large, and public sector organisations). The study highlights both the benefits and challenges experienced by organisations using FOSS. The study illustrates that while organisations benefit from increased innovations, cost/ time savings, flexibility, and enhanced security, they also face challenges such as lack of enough skilled personnel and limited community support. Organisations are also seen taking a cautious approach to licensing, favouring permissive licenses over restrictive ones. Based on …

The Rise Of Foss In India: Empirical Evidence And Insights From Cross-Sectoral Case Studies, Arul George Scaria, Suryaprakash Mishra, Shubham Shinde, Rashi Singhal

Research Reports

The report analyses the adoption of FOSS in India, primarily through case studies across four sectors (healthcare, education, finance, and software and IT services) and different types of organisations (start-ups, non-profits, medium, large, and public sector organisations). The study highlights both the benefits and challenges experienced by organisations using FOSS. The study illustrates that while organisations benefit from increased innovations, cost/ time savings, flexibility, and enhanced security, they also face challenges such as lack of enough skilled personnel and limited community support. Organisations are also seen taking a cautious approach to licensing, favouring permissive licenses over restrictive ones. Based on …

Integrating Recycled Acrylonitrile–Butadiene–Styrene Plastics From Electronic Waste With Carbon Black For Sustainable Asphalt Production, Sepehr Mohammadi, Dongzhao Jin, Zhanping You

Michigan Tech Publications

As the global demand for electronic equipment continues to grow, many devices are being replaced more frequently, resulting in a rapid rise in electronic waste (e-waste), now the fastest growing waste stream worldwide. Motivated by this, the objective of this study is to present an environmentally friendly method to recycle acrylonitrile–butadiene–styrene (ABS), one of the most common e-waste plastics, by using it for asphalt production. In contrast to earlier methods of plastic-modified asphalt production involving complex pretreatments or complimentary additives unsuitable for plant-scale use, this study aims to demonstrate a practical, low-cost solution through the use of carbon black. This …

Prospects For Telemedicine Adoption: Prognostic Modeling As Exemplified By Rural Areas Of Usa, Jisun Kim, Hamad Alanazi, Tugrul Daim

Engineering and Technology Management Faculty Publications and Presentations

Experts predict that in the majority of countries state healthcare expenditures will continue to rise. Usage of telemedicine applications – the use of information and communications technologies (ICT) in order to provide clinical health care at a distance – will help optimize the costs of healthcare in the long-term. The main advantages of telemedicine include reducing the number of doctor’s errors, saving both patients and physicians time, and improving the efficiency of healthcare organizations. It also ensures timely and quality services for large segments of the population living in remote territories with difficult socio-economic conditions, particularly rural areas.The paper forecasts …

Machine Tool Interoperability In Smart Manufacturing And Industry 4.0, M. R. Mccormick, Mohammed Shafae, Thorsten Wuest

Faculty Publications

Real-time decision making is supported by data-hungry emerging technologies such as machine learning and digital twins. Innovations in manufacturing process control utilizing these technologies are constrained by interoperability. Marketing materials, sales pitches, and academic literature portray interoperability on the factory floor as seamless and robust. However, this study demonstrates that in spite of plentiful mature standards, interoperability on the factory floor is neither seamless nor robust. To exemplify interoperability in the context of an established and widely adopted standard, this study analyzes the interoperability of machine tools produced by a premier equipment builder which has exceeded US$1 billion in sales …

Corrosion Behavior Of Mgtizn And Mg4tizn Alloys After Ball Milling And Subsequent Spark Plasma Sintering, Alexander Helmer, Rahul Agrawal, Manoj Mugale, Tushar Borkar, Rajeev Gupta

Mechanical Engineering Faculty Publications

Magnesium-containing multi-principal element alloys (MPEAs) are promising for lightweight applications due to their low density, high specific strength, and biocompatibility. This study examines two Mg-Ti-Zn alloy compositions, equal molar MgTiZn (TZ) and Mg4TiZn (4TZ), synthesized via ball milling followed by spark plasma sintering, focusing on their microstructures and corrosion behaviors. X-ray diffraction and transmission electron microscopy revealed the formation of intermetallic phases, including Ti2Zn and Mg21Zn25 in TZ, while 4TZ exhibited a predominantly Mg-rich phase. Potentiodynamic polarization and immersion tests in 0.1 M NaCl solution showed that both alloys had good corrosion resistance, with values of 3.65 +/- 0.65 mu …

Oscillatory Flow Improves Hydrodynamic Ordering Of Soft Suspensions In Rectangular Channels, Paul C. Millett

Mechanical Engineering Faculty Publications and Presentations

A computational study is presented that examines the hydrodynamic ordering of soft-particle suspensions within rectangular channels undergoing both steady and oscillatory flow. In these conditions, particles assemble into one-dimensional train-like configurations aligned in the flow direction. The results indicate that oscillatory flow facilitates a significant improvement in the ordering process, particularly for the assembly of multiple side-by-side trains within the channel. Several key parameters are systematically varied, including the Wolmersley number (Wo) representing the oscillatory frequency, the capillary number (Ca) representing the particle deformability, and the particle volume fraction (phi). It is found that optimal ordering occurs for a particular …

Design Of A Simplified Biomimetic Autonomous Entertainment Robot, Jessica E. Morris, Shanny May Ruiz, Morgan Snyder, Hannah Guild, Gabriel Cardona-Tous

Graduate Scholarship and Creative Works

The advancement of technology has paved the way for robots with the purpose of entertainment to become more popular. However, the exploration of biomimetic actions as a factor of entertainment is majorly limited to the mimicry of young domesticated animals such as puppies and kittens, with some notable exceptions. However, there is a wide range of possibilities for robotics that mimic animals marketed as pets, outside of the common examples. This work seeks to explore the opportunity for autonomous systems with entertainment driven and expressive actions in the family of Testudines (turtles and tortoises), an undomesticated species, but still often …

Unified Hybrid Censoring Samples From Power Pratibha Distribution And Its Applications, Mahmoud Mansour, Hebatalla H. Mohammad Dr, Khalaf S. Sultan Prof.

Basic Science Engineering

This paper suggests an extensive inferential method for the Power Pratibha Distribution (PPD) under Unified Hybrid Censoring Schemes (UHCSs), since there is a growing interest in flexible models in both reliability and service operations. This work studies the PPD model using standard Maximum Likelihood Estimation methods and modern Bayesian approaches too. Using a complex architecture, UHCS simulates tests more closely to what is done in practice than by using more basic censoring schemes. Using analysis, the probability and statistical ranges are carefully calculated for the parameters. Tests demonstrate that Bayesian estimation gives better results than many other methods for estimation, …