Engineering Commons^™

Creating Blood Analogs To Mimic Steady-State Non-Newtonian Shear-Thinning Characteristics Under Various Thermal Conditions, Hang Yi, Alexander Wang, Christopher Wang, Jared Chong, Chungyiu Ma, Luke Bramlage, Bryan Ludwig, Zifeng Yang

Mechanical and Materials Engineering Faculty Publications

Blood analogs are widely employed in in vitro experiments such as particle image velocity (PIV) to secure hemodynamics, assisting pathophysiological diagnoses of neurovascular and cardiovascular diseases, as well as pre-surgical planning and intraoperative orientation. To obtain accurate physical parameters, which are critical for diagnosis and treatment, blood analogs should exhibit realistic non-Newtonian shear-thinning features. In this study, two types of blood analogs working under room temperature (293.15 K) were created to mimic the steady-state shear-thinning features of blood over a temperature range of 295 to 312 K and a shear range of 1~250 s−1 at a hematocrit of ~40%. Type …

Sidesense: Robust Physiological Motion Detection Via Mmwave Joint Communication And Sensing Systems With Multiple Beams, Mohammed Shadman Ishrak, Jannatun Noor Sameera, Alvin Yang, Yanjun Pan, Yao Zheng, Olga Boric-Lubecke, Victor M. Lubecke

Electrical Engineering and Computer Science Faculty Publications and Presentations

A 28-GHz multibeam joint communication and sensing system called SideSense is presented, in which a line-of-sight (LoS) beam is used to maintain reliable communication, while other sensing beams are used to enhance physiological motion detection. SideSense decodes the motion frequency and shape from the channel state information (CSI) by first tuning the gain ratio and phase differences between the LoS communication beam and non-LoS (NLoS) beam to maximize the sensing signal-to-noise ratio (SSNR) without significantly degrading the communication channel capacity (CCC). Analytical results based on a bistatic model are presented to show a gain ratio of around 1 and a …

Retraction: A Database Of Teleseismic Shear-Wave Splitting Measurements For The Ordos Block And Adjacent Areas(Seismological Research Letters (2022), 93, 5, (2731–2739), 10.1785/0220210310), Lin Liu, Stephen S. Gao, Kelly H. Liu, Tu Xue, Yan Jia, Sanzhong Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An earlier version of this article (Liu et al., 2022) included private data from the Himalayan-III program which should not have been made public. The authors acknowledge and regret their negligence during the selection of the measurements. The impacted data represent only 2.7% of the total data published in this article, and after review, the authors and the editors agree that this unintentional error has no bearing on the work's scientific conclusions. Therefore, we are retracting the impacted data and have made corrections to remove any Himalayan-III program data from the article's text, figures, and supplemental tables.

Investigating The Thixotropy Of Fresh Struvite Cement-Based Composite: Insights On Mechanisms Of The Pastes’ Thixotropic Behavior, Ugochukwu Ewuzie, Abdulkareem O. Yusuf, Damilola Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite (ST) recovered during wastewater treatment has been sparsely applied in cement-based composites. This study systematically evaluated the thixotropic behavior of cement-struvite (CST) pastes, a mix of 5–20 % ST by mass of cement, and proposed the interaction mechanisms leading to the pastes' thixotropy. The hysteresis loop area was used to establish the pastes' thixotropy and investigate its relationship with increased ST content, temperature, and yield stress. In the thixotropic behavior model used, the equilibrium shear stress was employed to examine the CST pastes' irreversible change; the characteristic time of deflocculation was used to study the flocs destruction process; and …

Gallium-Containing Bioactive Glasses: Their Influence On Ion Release And The Bioactivity Of Resulting Glass Polyalkenoate Cements, Lana Margaret Placek, Danielle Lee Perry, Mark Robert Towler, Anthony William Wren

Chemical and Biochemical Engineering Faculty Research & Creative Works

A series of glasses (0.48SiO2 − [0.40-x]ZnO − 0.12CaO-xGa2O3, x = 0, 0.8, 0.16) was developed to formulate a series of Ga-containing glass polyalkenoate cements (GPCs). The solubility of GPCs was tested using DI water, and it was found that the sample containing the highest mol% of Ga, LGa-2, had the most Ga ion release. The GPCs were incubated in SBF, and SEM/EDS analysis revealed that the at% of P increased, while the at% of Si decreased, highlighting the CaP precipitation on the GPC surface. The at% of Ga also decreased, reinforcing the Ga release from the GPC. Cellular testing …

Performance Characterization And Mechanistic Study Of Dry Process Wr/Sbs Composite Modified Asphalt Mixture, Hongfu Liu, Xiangyang Ren, Wenwen Ge, Zhengwei Yi, Dongzhao Jin, Xinghai Peng, Songtao Lv

Michigan Tech Publications

The dry process modification is characterized by simplicity, flexibility, low energy consumption, and low pollution, making it an ideal choice in pavement repair engineering. This study aims to optimize the use of waste rubber powder and SBS modifiers in dry process composite modification by preparing dry process WR/SBS composite modified particles (WR/SBS CMP) using a twin-screw extruder. The optimum mixing content of modified particles was determined through comparative analysis of pavement performance of dry process WR/SBS composite modified, wet-process SBS-modified, and matrix asphalt mixtures. The rheological properties and modification mechanism of the asphalt binder extracted from these mixtures were tested …

Balancing Infrastructure Demands: Analysis Of Materials Pricing And Supply, Bethany Paris, Ying Li, Steve Waddle, Bryan Gibson

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) lets around 700 contracts year valued at over $1 billion. One of KYTC’s foremost goals is to deliver projects on time and on budget. However, over the past five years achieving these twin goals has grown in difficulty due to material shortages, widespread inflation, supply chain disruptions, and the tight labor market triggered by the COVID-19 pandemic. Although material shortages have abated and supply chain disruptions have eased, instability is seemingly a permanent feature of the national and global economies. As such, Cabinet decision makers need reliable tools that can be used to understand historical …

Vertical Hydrokinetic Turbine, Miki Harding, Ben E. Mertz

Rose-Hulman Undergraduate Research Publications

No abstract provided.

Enhanced Pavement Project Prioritization, Bryan Gibson, Jon Wilcoxson, Gayle Marks

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) is responsible for inspecting, maintaining, and improving 27,000 centerline miles of pavement. Given the vastness of the state’s transportation network, KYTC needs a robust method for prioritizing pavement preservation projects. The Cabinet has relied on pavement condition ratings, data collected using Laser Crack Measurement Systems, and input from district-level staff to prioritize these types of projects. But this approach overlooks information that should be considered, such as factors related to safety, mobility, and geographic context. To resolve these shortcomings, Kentucky Transportation Center (KTC) researchers worked with KYTC subject-matter experts to develop the Enhanced Pavement Prioritization …

Data-Driven Prediction Of Binder Rheological Performance In Rap/Ras-Containing Asphalt Mixtures, Eslam Deef-Allah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Asphalt recycling technologies have advanced considerably over the last few decades with the utilization of reclaimed asphalt pavements (RAP) and recycled asphalt shingles (RAS). Characterizing aged and heterogeneous binders in these mixtures is challenging, particularly with limited extracted binders. This study suggests a data-driven framework that considers the rheological, chemical, and thermal characteristics to predict the binders' performance. Ninety-seven mixtures with 0–35% of the asphalt binder replaced with RAP/RAS binders were included as cores from the field, plant-produced mixtures, and laboratory-fabricated mixtures. The binders were chemically quantified using aging, aromatic, and aliphatic indices. Thermal analyses of the binders involved the …

Towards Accountability: A Primer On The Space Debris Problem And An Overview Of The Legal Issues Surrounding It, William Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Since 1957, the near-Earth population of trackable space objects has grown in number to over 36,000. Of these 36,000+ trackable objects now in low Earth orbit, just a few thousand are working spacecraft. The rest are Earth-orbiting objects which are no longer operational and are considered to be space junk. Because this junk can no longer receive maneuvering commands from its Earth-based owners, the survivability of other spacecraft traveling through or operating in Earth orbit can be jeopardized by the impacts of any number of pieces of this space junk, whose origins can usually be traced back to defunct satellites. …

Introducing Hyflex Teaching Into Foundation Design, Juan Pablo Osorio

Case studies: Digital Education

Foundation Engineering is a postgraduate module in the ME in Civil Engineering, which covers the theoretical and practical aspects of the foundation design of structures, using lectures and tutorials as teaching methods. The module has 24 hours of direct contact with the lecturer and 76 hours of self-directed learning. This is a semester 2 module that follows Applied Geotechnical Engineering, which is delivered in semester 1 but is not a prerequisite. Both modules are optional in the programme; however, most students interested in the subject matter take both modules. The mode of delivery for both modules is usually online. For …

Introducing Hyflex Teaching In Geotechnical Engineering, Juan Pablo Osorio

Case studies: Digital Education

Geotechnical Engineering 2 is a third-year technical module in the BE in Civil Engineering and the BE in Structural Engineering, and it covers the theoretical and practical aspects of the retaining wall stability, foundation design and compressibility of soils. The two classes are merged together for it. It uses lectures, laboratories and tutorials as teaching methods. The module has 36 hours of direct contact and 64 hours of self-directed learning. It is a semester 2 core module that follows Geotechnical Engineering 1. The mode of delivery for both modules is in-person lectures at the lecture hall, with three laboratory practices …

Ai Tools In Natural Resources And Environmental Systems For The Classroom, Research, Extension And Industry, Derek M. Heeren, C. T. Agouridis, Debabrata Sahoo, Isaya Kisekka, Trisha L. Moore

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This white paper synthesizes a series of panel insights on AI adoption across education, Extension, research and industry contexts within natural resources and environmental systems. It emphasizes that while advanced machine learning and generative AI introduce structural shifts in autonomy, scale, and cognitive augmentation, their value lies in augmenting, not replacing, human expertise. Applied tool examples include decision‑support systems for rural water operators, HAB‑diagnosis apps integrating image classification and natural‑language guidance, an irrigation educational chatbot tailored to user background, and sensor‑driven orchard AI for light interception estimation and data gap filling. A recurring design imperative involves co‑development with end users, …

Stabilizing Embankments Using Geosynthetic Reinforcement, Daryl Greer, Charlie Sun

Kentucky Transportation Center Research Report

Reinforced soil slopes (RSSs) can be a feasible solution for embankments where there exist right of way re-strictions, environmental issues, rolling or mountainous topography, unfavorable geology, and other limiting fac-tors. They can be an alternative to retaining walls or importing select fills to construct steeper, stable embankment slopes where flatter embankment slopes may result in unwanted impacts, costs, and maintenance issues. Thisreport discusses the advantages and limitations of using geosynthetic reinforcement to construct RSSs. Researchers investigated current design, specification, and construction practices to determine which practices can be adopted by the Kentucky Transportation Cabinet (KYTC). Specifications were developed for using …

Data-Driven Methods For Signal Analysis And Nonlinear System Identification, Cristian Felipe López Ruano

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In recent years, data-driven modeling has gained considerable attention in nonlinear system identification, offering a powerful alternative to traditional physics-based methods. This has been possible by advances in machine learning, sparse regression, and differential equations in a weak form, which allow the accurate capture of complex nonlinear dynamics, even when the measurements are in strong background noise. Moreover, integrating these models with physical knowledge further enhances their reliability and interpretability, making them suitable for a wide range of science and engineering applications.

In this dissertation, we investigate algorithms for data-driven nonlinear system identification to obtain ordinary differential equations that govern …

Redundant Functions Of Mir156-Targeted Squamosa Promoter Binding Protein-Like Transcription Factors In Promoting Cauline Leaf Identity, Darren Manuela, Liren Du, Qi Zhang, Yifei Liao, Tieqiang Hu, Jim P. Fouracre, Mingli Xu

Faculty Publications

No abstract provided.

Distributed Tracking Control Of Multiple High-Order Uncertain Nonlinear Systems With Guaranteed Performance, Eduardo Alvarez, Wenjie Dong

Electrical and Computer Engineering Faculty Publications

This paper addresses the distributed tracking control of multiple uncertain high-order nonlinear systems with prescribed performance requirements. By introducing a performance function and a nonlinear transformation, the prescribed fixed-time performance tracking control problem is reformulated as a distributed tracking control problem for multiple special nonlinear systems. With the aid of the universal approximation theorem for continuous functions and algebraic graph theory, distributed robust adaptive controllers are designed using the backstepping technique. Simulation results are presented to demonstrate the effectiveness of the proposed algorithms.

Novel Respirometry Measurement And Comparison Of Monod Kinetic Constants And Methanogen Concentrations For 27 Full-Scale Anaerobic Bioreactors, Nicholas Benn, Antonio Martins, Daniel H. Zitomer

Civil and Environmental Engineering Faculty Research and Publications

Monod kinetic coefficient values (km and Ks) as well as methanogen concentrations (Xac and Xh2) for various anaerobic bioreactors are required to gain a deeper understanding of anaerobic biotechnology. However, there are no existing, practical methods to measure or estimate these parameters or variables in typical anaerobic digester biomass that contains mixed cultures with inert organic solids. Current measurement methods rely on pure cultures developed in the laboratory. In this work, a novel respirometric method was developed and used to determine methanogen Monod parameters and active biomass concentration for samples from 27 full-scale anaerobic reactors. Differences (one to three orders …

Jme4110: Hydro-Excavator Robot, Diane L. Evans, Nathan Fenton, Grant Cole, Nicholas Sipe

Washington University / UMSL Mechanical Engineering Design Project JME 4110

In an environmental situation wherein, diesel has leaked into soil surrounding high voltage lines in an underground confined space where workers cannot access physically and for safety reasons. To alleviate the situation, the project goal is to create a remotely controlled robot, with umbilical attachments. Due to the nature of the environment containing sensitive and electrically charged equipment, mechanical means of removing the soil are not feasible. For this reason, the robot is to remove contaminated soil by using a powerful water sprayer and vacuum combination. Other options for features of this robot are that it uses tracks for movement, …

Jme 4110: Design And Evaluation Of A Remote-Operated Tool For High-Ceiling Light Bulb Maintenance, Faiq Kureshi, Austin Carr, Phuc Truong, Klevis Malaj

Washington University / UMSL Mechanical Engineering Design Project JME 4110

Changing light bulbs in high ceilings is a common but hazardous task. Existing tools are awkward, unstable, and often lead to dropped bulbs, damaged fixtures, or the need for ladders, increasing both risk and effort. There is a clear need for a safe, accurate, and efficient solution that allows bulb replacement from the ground without compromising speed or precision

Jme 4110: Remotely Actuated Rail Switch, Calysta Yalew, Chibale Anwisye, Ron Almira, Andy Sengsavang

Washington University / UMSL Mechanical Engineering Design Project JME 4110

This project focuses on developing a device that will switch the direction of rail by moving the manual rail switch itself. This design consists of two winches strategically placed on either side of the rail switch. It is then attached to a beam clamped to the manual switch and via a button on a phone, can pull the handle left and right. With this device patrons are able to keep safe and railway operations would be more efficient.

Using Knovel Steam Calculators Instead Of Printed Steam Tables, Anthony Reynolds

Case studies: Digital Education

Applied Thermodynamics is a cornerstone module in mechanical engineering curricula, providing students with the foundational understanding of energy systems, heat transfer, and the behaviour of working fluids such as steam. Traditionally, students have relied on printed steam tables found in the appendix of class textbooks to determine thermodynamic properties—an approach that, while educational, can be both time-consuming and prone to errors. With the increasing availability of digital tools in education, there is a growing opportunity to enhance the teaching and learning of technical subjects through technology. One such tool is the Knovel Steam Calculators, an interactive, web-based resource that allows …

Using The Ms Surface Pro 9 To Enhance Teaching And Learning, Anthony Reynolds

Case studies: Digital Education

Thermodynamics is a fundamental subject for mechanical engineers, focusing on the principles of energy conversion and the behaviour of matter under various conditions.Thermodynamics is very challenging for students for several reasons: It involves abstract concepts like entropy, which can be difficult to visualize and understand. It requires a strong grasp of mathematics(e.g.,calculus),which can be intimidating for somestudents. It intersects with various fields(e. g.physics and chemistry) requiring students to integrate knowledge from different areas.

Mobile Hyflex And Cfd, Fergal Boyle

Case studies: Digital Education

Computational Fluid Dynamics (CFD) is one of 12 taught modules on the Master of Engineering (ME) in Mechanical Engineering programme delivered on the Bolton St campus by the School of Mechanical Engineering. This programme is delivered as both a full-time programme (12 months) and a 2-3 year part-time programme with lectures held in the evenings only from 6-10 pm on Mondays, Tuesdays, and Wednesdays. CFD is delivered in Semester 2 on a Tuesday evening from 6-8 pm in Room 236, a hardwired HyFlex room, with another module delivered directly afterwards. The number of students taking the module is generally around …

A Uas-Centered Investigation Of Vorticity Characteristics And Cold Pool Structure Across Forward And Left-Flank Boundaries In Supercells, Mark R. De Bruin

Department of Earth and Atmospheric Sciences: Dissertations, Theses, and Student Research

Supercell internal boundaries are the locus of tornadogenesis; thus, understanding the characteristics of these boundaries, particularly in terms of vorticity, is important for identifying the role they play in tornado formation. Insight into the overall characteristics of internal boundaries and their possible role in tornadogenesis have been driven by studies reliant on numerical modeling-based experiments. Observational studies often neglect above-surface conditions or, when these observations are made, lack the spatial resolution to resolve boundary characteristics. During TORUS (Targeted Observation by Radars and UAS of Supercells) 2019 and TORUS-LItE (TORUS Left-flank Intensive Experiment) 2023, uncrewed aircraft systems (UAS) and mobile mesonets …

Development And Implementation Of A Vector-Quantized Transformer Autoencoder For Monitoring Bicycle Road Conditions, Kewei Ren

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Adviser: Chun-Hsing Ho

The long-term, sustainable assessment of bicycle road conditions is essential for ensuring cyclist safety and promoting equitable infrastructure management. While traditional detection methods based on manual thresholds have demonstrated some effectiveness, they carry limitations due to the diversity of pavement materials, cyclist behaviors, and sensor platforms. Although recent advances in deep learning offer promising alternatives, established techniques are primarily applied to highway anomaly detection and are rarely adapted for bicycle roads. Furthermore, most related studies lack clear definitions for anomalies and transparent annotation procedures, resulting in a shortage of effective datasets and detection methods specifically for bicycle …

Feasibility Of Using Recycled Waste Plastic In Concrete Pavements In Nebraska, Amasi Hajahja

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Waste plastic (WP) is a growing environmental concern due to its non-biodegradable nature, large-scale production, and harmful impact on natural resources. With nearly 75% of WP in the United States ending up in landfills, effective recycling strategies are urgently needed. In parallel, the limited availability of natural aggregates highlights the need for alternative materials in concrete construction. This study investigates the feasibility of using recycled waste plastic (RWP) in concrete mixtures, both as aggregates and fibers for rigid pavement applications in Nebraska. Concrete mixtures were prepared by partially replacing natural fine aggregates with recycled plastic aggregates (RPA) at replacement levels …

Graduate School Blog - July 2025 Volume 1, Cynthia Haynes

UofM Grad School Blog

The July 2025 UofM Graduate School Blog – Volume 1 continues the Cost of Graduate School Guide with a deep dive into hidden and variable expenses such as residency-based tuition differences, program-specific fees, and differential tuition. The blog provides practical tips for prospective students on how to ask the right financial questions when comparing programs. It also features a student spotlight on Billy Brooks, a dual MHA/MBA candidate motivated to transform healthcare access and equity. Upcoming events include a Virtual Fall 2025 Open House with Financial Aid and USBS, a Dissertation Writers Retreat, and both in-person and virtual Graduate Student …

Conservation Management Effects On Soil And Agronomic Properties In A Furrow-Irrigated Corn System In East-Central Arkansas, Jeferson P. Pimentel, Christopher G. Henry, Kris R. Brye, Benjamin R. Runkle, Amanda J. Ashworth, Edgar Mersiovsky, Kevin C. Thompson

Biological and Agricultural Engineering Faculty Publications and Presentations

Cover crops can improve soil physical properties and help to sustain agricultural crop yields. A 6-year study conducted from 2017 to 2022 examined the effects of conservation soil management practices in a furrow-irrigated continuous corn (Zea mays L.) system on a silt-loam soil (Typic Albaqualf) in the Lower Mississippi River Delta region of eastern Arkansas. This study compared the effects of conventional tillage (CT), no-tillage (NT), and no-tillage with cover crops (CC) in selected soil physical and chemical properties (i.e., soil bulk density (D b), porosity (& fnof;t), field capacity (Theta FC), Permanent wilting point (Theta PWP), Plant available water …