Engineering Commons^™

Rectified Synthesis Of Coupler Driven Four Bar Mechanisms For Two And Three Position Motion Generation, Ramanujam Thiruvenkatachari

Mechanical & Aerospace Engineering Theses & Dissertations

Four-bar mechanisms are widely used in the industry to solve a variety of motion problems. Till recently, their design was based on fundamental kinematics and brute force techniques, resulting in impractical designs and spurious linkages that failed to perform their desired functions effectively.

Procedures have been developed and implemented to guide the rigid body of crank driven four-bar linkages, through a set of design positions with techniques to avoid their defects. However, the practical applications of linkages used in the industry are coupler driven, with primitive synthesis procedures based on trial and error. The opening and closing of the hood …

A Progressive Damage Methodology For Residual Strength Predictions Of Center-Crack Tension Composite Panels, Timothy William Coats

Mechanical & Aerospace Engineering Theses & Dissertations

An investigation of translaminate fracture and a progressive damage methodology was conducted to evaluate and develop residual strength prediction capability for laminated composites with through penetration notches. This is relevant to the damage tolerance of an aircraft fuselage that might suffer an in-flight accident such as an uncontained engine failure. An experimental characterization of several composite materials systems revealed an R-curve type of behavior. Fractographic examinations led to the postulate that this crack growth resistance could be due to fiber bridging, defined here as fractured fibers of one ply bridged by intact fibers of an adjacent ply.

The progressive damage …

An Artificial Life Model Of Engineering Attrition Contemplation: Why Do Federally Employed Civilian Engineers Think Of Quitting?, John William Herweg

Engineering Management & Systems Engineering Theses & Dissertations

The research objective is, using engineer turnover, to develop an Artificial Life (A-Life) model and simulation methodology useful for studying behavioral variables of individuals in an organization.

One consequence of work stress is burnout, and its extreme expression is quitting or turnover. Various models have been used to explain and predict this behavior. Behavior models are useful tools to explore the ability of organizational policies to reduce stress levels and turnover. Advancing the usefulness of models is a goal which assists all research on human behavior. A-Life offers a new and different methodology for this purpose. It provides an ability …

Organic Matter Characterization Of Virginia Rivers And Reservoirs, Susanne Margaret Lockhart

Civil & Environmental Engineering Theses & Dissertations

Research was conducted on characterizing the DOC characteristics and to discern whether spatial and temporal variations exist in these characteristics as impacted by seasonal, hydrologic or other factors. Data was cumulative of two studies: the State-Wide Survey in which water samples were taken in March and July 1995 from surface waters in four physiographic regions of Virginia and the James River Peninsula Survey concentrating on reservoirs and rivers on the James River Peninsula.

Results illustrate that the two largest fractions of DOC were the hydrophilic and hydrophobic acid fractions. An increase in DOC was observed between the mountains and the …

Unsteady, Transonic Flow Around Delta Wings Undergoing Coupled And Natural Modes Response: A Multidisciplinary Problem, Margaret Anne Menzies

Mechanical & Aerospace Engineering Theses & Dissertations

The unsteady, three-dimensional Navier-Stokes equations coupled with the Euler equations of rigid-body dynamics are sequentially solved to simulate and analyze the aerodynamic response of a high angle of attack delta wing undergoing oscillatory motion. The governing equations of fluid flow and dynamics of the multidisciplinary problem are solved using a time-accurate solution of the laminar, unsteady, compressible, full Navier-Stokes equations with the implicit, upwind, Roe flux-difference splitting, finite-volume scheme and a four-state Runge-Kutta scheme, respectively. The primary model under consideration consists of a 65° swept, sharp-edged, cropped delta wing of zero thickness at 20° angle of attack. In a freestream …

Dynamic Lot Sizing And Scheduling In A Multi-Item Production System, Padmanabhan Soundar

Engineering Management & Systems Engineering Theses & Dissertations

In this research, algorithms are developed to address the problem of dynamic lot sizing and scheduling in a single level (or single operation) production system. This research deviates from previous research in this area in that it does not have the kind of assumptions regarding the real world production system that normally were made to reduce the complexity of the problem. Specifically, this research explicitly considers finite capacity, multiple items, known deterministic dynamic demand, sequence dependent setup times and setup costs, setup carryover and variable backlogging. The objective is to simultaneously determine the lot size and the sequence of production …

Electron Beam Emission From A Ferroelectric Cathode, Crystal Briana Garland

Electrical & Computer Engineering Theses & Dissertations

The electron beam emission from a LTZ-2 (lead titanate-zirconate) ferroelectric cathode was characterized. The purpose was to determine the operation range for this type of electron emitter. The experimental apparatus consisted of a high voltage driving circuit with a charging voltage up to 30kV. A solid-state SCR switch is used to generate the high voltage pulse which induces a polarization change. Current densities on the order of 80A/cm² 30kV were achieved. The electron beam profile is Guassian. At long anode-cathode distances the measured current densities were found to be above Child-Langmuir space charge limits. The large current densities and …

Frequency Response Enhancement Of A Flow Sensor Using Diamond Thin Films Synthesized By Plasma Cvd, John Curren Hagwood

Electrical & Computer Engineering Theses & Dissertations

Theoretical modeling conducted previously in our Microelectronics Laboratory has shown that a layer of diamond film inserted between a metal film and a substrate will enhance the frequency response of a conventional thin film flow sensor. This thesis involved fabricating and testing a conventional thin film sensor of nickel on quartz (Ni/Q) and a diamond enhanced sensor (Ni/D/Q) for comparative frequency response analysis to validate the theory. Diamond films were grown onto quartz substrates using a microwave plasma enhanced chemical vapor deposition process. Conditions were established to synthesize continuous diamond films on quartz substrates. These films were characterized by scanning …

Wavelength Modulation Spectroscopy With Diode Lasers, Ying Lu

Electrical & Computer Engineering Theses & Dissertations

Wavelength Modulation Spectroscopy is a non-intrusive technique which enables several parameters such as concentration, velocity, and temperature of a target specie to be measured. The method involves a modulation of a probe laser beam and detection at the fundamental, or any harmonic frequency, by a phase-sensitive apparatus. The theory of wavelength modulation is discussed. Effects of the finite value of the wavelength modulation index, together with the effects of any residual amplitude modulation that often occurs simultaneously in a diode laser, are included. It is shown that there are several advantages in using detection harmonics orders greater than the second. …

Scheduling Processors For Distributed, Critical, Real-Time Systems, Hari K. Narasimhamurthy

Electrical & Computer Engineering Theses & Dissertations

The development of a procedure to obtain cyclo-static schedules for distributed, critical real-time applications is presented in this thesis. The applications considered in this thesis are characterized by hard deadlines and periodic inputs. The applica­ tions are described by a data flow graph model which guarantees performance. Given the data flow graph representation, processors are scheduled to complete tasks as specified in the representation. The scheduling technique separates the scheduling of tasks in time and the assignment of processors to tasks. While different criteria exist for task scheduling, a schedule which minimizes latency and maximizes throughput is used in this …

Petrochemical Analysis By Remote Fiber-Optic Raman Spectroscopy And Partial Least Squares Regression Analysis, Philip Edmund Flecher Jr.

Chemistry & Biochemistry Theses & Dissertations

A dispersive Raman system with charge coupled device (CCD) detection, distributed Bragg reflector (DBR) diode laser excitation, and a fiber optic probe has been developed for the rapid analysis of petrochemicals and fuels. Initially, mock petroleum fuels with analyte concentrations from 1.S - 16% were prepared and analyzed with the system. The inability of the original index guided diode laser to maintain a constant frequency during the mock petroleum analysis was a recurrent problem. The DBR laser was subsequently shown to have stability superior to index guided lasers, and was used in the remainder of the research.

Real gasoline samples …

A Receiving Water Quality Model For Dissolved Metal Runoff From A Floating Drydock, Thomas O. Fenn

Civil & Environmental Engineering Theses & Dissertations

A methodology for modeling the water quality mixing zone of dissolved metal bearing storm water runoff is presented with specific application to floating drydocks in a tidal estuary. The method relies upon a solution of the mass balance equation as contained in the computer program, Water Quality Analysis Simulation Program (WASPS), an Environmental Protection Agency (EPA) model. Separate applications are presented for dissolved metal and solid settling to optimize the WASPS program capabilities.

WASPS provides the capability to evaluate the mass balance equation in a finite difference scheme applied over a large number of small volume segments. The program may …

Gamma-Ray Optical Studies Of ⁷³Ge And ⁵⁷Fe, Walter Carlton Mcdermott Iii

Physics Theses & Dissertations

The research described herein is among the first attempts to test one of the more popular theories for development of a gamma-ray laser. This work is a "marriage" between the Borrmann effect, which is a consequence of the dynamical theory of x-ray diffraction, and time-filtering which comes from time-domain Mossbauer spectroscopy.

Our experiments involved the search for a nuclear Borrmann effect and the subsequent time-filtering effect using ⁵⁷Fe and ⁷³Ge. In both cases, no nuclear Borrmann effect was observed; however, the methodology and criteria necessary for such an observation with any isotope were documented. The procedures necessary for …

Speech Feature Computation For Visual Speech Articulation Training, Stefan Auberg

Electrical & Computer Engineering Theses & Dissertations

A new version of the Visual Speech Articulation Training Aid was implemented which provides real-time visual feedback for speech articulation training. This version was migrated to a Windows Multimedia PC from a previous version which used a Personal Computer (PC) system and additional specialized and expensive custom hardware. This new version will make the system more available to schools and private users. A new method was developed for computing spectral/temporal features which characterize the speech sounds. In addition to the typical frame-based spectral analysis parameters, the new method represents temporal changes of the spectrum with a small number of features. …

Developing Methods To Measure And Project Levels Of Combat Readiness In A Naval Aviation Squadron At The Unit Level, Michael Lawrence White

Engineering Management & Systems Engineering Theses & Dissertations

Among the various missions and levels in a military organization, the term "Combat Readiness" is defined in many ways. To a unit-level command, such as an aircraft squadron, it simply refers to the unit's capability to perform its assigned mission when called upon. The proof of that capability is evident in the aftermath of combat, however, it is too late at that point to address any shortcomings that may exist. The problem is, how can the unit effectively define, continuously measure, and confidently forecast its ability to perform in combat? A quantitative model based upon historical data that encompasses all …

Variable Step Size Lms Adaptive Filters With Delayed Coefficient Updating, Guixian Xu

Electrical & Computer Engineering Theses & Dissertations

A new approach to delayed LMS adaptive filtering is presented, which uses a variable step size for coefficient updating to increase convergence speed and improve tracking characteristics. The new algorithm, called delayed variable step size LMS (DVLMS), is explained, analyzed, and simulated to experimentally determine performance characteristics. Three different strategies for adjusting the step size are examined, and their performance is compared. Also, simulation results are presented to show that the proposed DVLMS systems provide faster convergence and lower mis-adjustment than previously proposed DLMS systems.

A One-Dimensional Model For Storm Breaching Of Barrier Islands, Cheol Shik Shin

Civil & Environmental Engineering Theses & Dissertations

A set of numerical models is developed for simulating the four stages of barrier breaching characterized by one horizontal spatial dimension.

The SBEACH model is employed for the first stage of dune/beach erosion. The Lax-Wendroff two-step explicit scheme for Stage II is developed to simulate initiation of ocean flood propagation on initially dry barrier islands and the method of characteristics (MOC), is employed to compute additional boundary data. The development of the Preissmann implicit scheme for water motion and a forward time centered space explicit scheme for sediment motion in Stages III and IV provide a tool to study the …

Sensitivity Analysis And Optimization Of Aerodynamic Configurations With Blend Surfaces, Almuttil Mathew Thomas

Mechanical & Aerospace Engineering Theses & Dissertations

A novel (geometrical) parametrization procedure using solutions to a suitably chosen fourth order partial differential equation is used to define a class of airplane configurations. Inclusive in this definition are surface grids, volume grids, and grid sensitivity. The general airplane configuration has wing, fuselage, vertical tail and horizontal tail. The design variables are incorporated into the boundary conditions, and the solution is expressed as a Fourier series. The fuselage has circular cross section, and the radius is an algebraic function of four design parameters and an independent computational variable. Volume grids are obtained through an application of the Control Point …

An Approach For Multidisciplinary Design Optimization, Robert V. Krueger

Mechanical & Aerospace Engineering Theses & Dissertations

Multidisciplinary Design Optimization (MDO) is an optimization technique that allows complex designs to be improved by managing conflicting goals in such a fashion so as to improve the overall design. This thesis presents a nonhierarchic MDO formulation and gives a general explanation of how it is to be applied to various appropriate problems. In addition, this thesis evaluates the viability of this MDO technique by applying it to two distinct, multidisciplinary problems that have been used as examples in other literature. The first example problem is a combined aerodynamic/structural problem and the second example is an alkylation process problem. First, …

Study Of Surface Heat Exchangers For High-Altitude Atmospheric Research Aircraft, Te-Kang Wang

Mechanical & Aerospace Engineering Theses & Dissertations

A flush-mounted heat exchanger concept, using the wing surface to dissipate heat, is investigated as a lower drag alternative to conventional ducted plate-fin radiators. A feasibility analysis is made for an unmanned high-altitude aircraft which will reach altitudes up to 25 kilometers. A computer code is used to calculate approximate heat transfer coefficients over the airfoil's surface. A model is tested in the Old Dominion University subsonic wind tunnel to verify the results of the computer code. The results indicate that a flush mounted heat exchanger design is able to provide 20 to 100 percent of the required heat dissipation …

Exact Solutions For Orthogonal And Non-Orthogonal Magnetohydrodynamic Stagnation-Point Flow, Shahrooz Moosavizadeh

Mathematics & Statistics Theses & Dissertations

The viscous plane flow of an electrically conducting fluid towards an infinite wall is solved in the presence of a magnetic field which is aligned with the flow far from the wall. The problem has two dimensionless parameters-- ε, the magnetic Prandtl number, and β, the square of the ratio of Alfven velocity to fluid velocity far from the wall. The problem has a similarity solution which reduces the governing equations to a system of coupled ordinary differential equations which can be solved numerically. For extreme values of ε, both large and small, singular perturbation techniques are used to derive …

An Enhanced Signal Processing Strategy For Fetal Heart Rate Detection, Charles Brewton

Electrical & Computer Engineering Theses & Dissertations

The goal of the research was to improve the signal processing strategy for an acoustic fetal heart rate monitor. The theory, implementation, and testing of several possible signal processing strategies for fetal heart rate detection are presented. The enhanced signal processing strategy implemented is discussed and justified with off-line Matlab simulations and real-time experiments. A FIR matched filter was used as a preprocessor to increase the SNR of the acoustic fetal heart signal. The Teager energy operator and autocorrelation, used in the previous version of the monitor, were combined with a matched filter. Linear prediction and quadratic energy detection were …

Variational Methods In Sensitivity Analysis And Optimization For Aerodynamic Applications, Adem Ibrahim Hussen

Mechanical & Aerospace Engineering Theses & Dissertations

Variational methods (VM) sensitivity analysis, which is the continuous alternative to the discrete sensitivity analysis, is employed to derive the costate (adjoint) equations, the transversality conditions, and the functional sensitivity derivatives. In the derivation of the sensitivity equations, the variational methods use the generalized calculus of variations, in which the variable boundary is considered as the design function. The converged solution of the state equations together with the converged solution of the costate equations are integrated along the domain boundary to uniquely determine the functional sensitivity derivatives with respect to the design function.

The determination of the sensitivity derivatives of …

The Progressive Failure Analysis Of Cut Slope In Anisotropic Strain Softening Soils, Jong Woon Choi

Civil & Environmental Engineering Theses & Dissertations

The failure phenomena in earth structures such as slopes and embankments on clay foundations are a consequence of the formation of failure surfaces.

A finite difference computer code, FLAC (Itasca Consulting Group, 1993), with the isotropic Mohr-Coulomb plasticity model, is used to analyze the undrained progressive failure of a strain softening soil during a slope excavation process. The focus of the study is on the short-term stability of slopes. In the first series of analyses, which are aimed at the evaluation of anisotropic strength effect on slope stability, the isotropic Mohr-Coulomb plasticity model is slightly modified to implement the anisotropic …

A Total Systems Analysis Method For The Conceptual Design Of Spacecraft: An Application To Remote Sensing Imager Systems, Knut I. Oxnevad

Engineering Management & Systems Engineering Theses & Dissertations

Increased emphasis is being placed on improving the performance of space projects, within tighter budgets and shorter development times. This has led to a need for more efficient space system design methods. The research described here represents an effort to develop and evaluate such a method.

Systems engineering and concurrent engineering together provide the theoretical foundation for the method. The method, derived from both this theoretical foundation and ideas from experts in the space industry, emphasizes a total systems analysis approach, taking into account given mission requirements, and the mathematical modeling of interactions between system variables and between subsystems. The …

Adaptive Integration Of Audio And Visual Information Using Discrete And Semi-Continuous Hidden Markov Models In Audiovisual Automatic Speech Recognition, Qin Su

Electrical & Computer Engineering Theses & Dissertations

An audiovisual semi-continuous hidden Markov model (HMM)-based Automatic Speech Recognition (ASR) system and an improved method of integrating audio and visual information in an audiovisual discrete HMM-based ASR system are investigated.

In the audiovisual discrete HMM, an adaptive integration formulation is employed, which incorporates the integration into the HMM at a pre-categorical stage. A visual weighting parameter is determined automatically, which allows the relative contribution of audio and visual information to be adjusted adaptively. Using an adaptive weight, the accuracy increased by 13% compared to the same model with no adaptive weight.

The semi-continuous HMM is a class of models …

Microhollow Cathode Discharges, K. H. Schoenbach, R. Verhappen, R. Tessnow, F. E. Peterkin, W. W. Byszewski

Bioelectrics Publications

The current–voltage characteristics of hollow cathode discharges and their predischarges in argon under dc and pulsed conditions were found to have a positive slope at pressures up to approximately 50 Torr, and currents up to 20 mA, at a hole diameter of 0.7 mm. In this range of pressure and current, parallel operation of hollow cathode discharges, without ballast, was demonstrated. Scaling to higher pressure is possible by reducing the hole diameter. Pulsed experiments with an array of cathode rings of 75 μm diameter allowed us to obtain parallel operation of more than 50 discharges at a pressure of 350 …

Optical Fiber Fourier Transform Infrared Evanescent Wave Absorption Spectroscopy Of Aluminum Hydroxide And Natural Corrosion, Juock S. Namkung

Electrical & Computer Engineering Theses & Dissertations

A new technique for continuous, real-time, in-situ detection of natural corrosion of aluminum alloys is presented. The technique is a generalized version of attenuated total reflectance (ATR) spectroscopy, that combines optical fibers and a Michelson interferometer spectrometer to make evanescent wave absorption measurements. Aluminum hydroxide is one of the major corrosion products of aluminum. Absorption spectra of powdered samples of aluminum corrosion, in the spectral region around three micrometers have been studied and compared with the spectra from pure powdered aluminum hydroxide. A chalcogenide optical fiber was used as an attenuated total reflectance (ATR) optical element. The same samples were …

Modelling An Optical Fiber Bragg Grating, Claudio Oliveira Egalon

Electrical & Computer Engineering Theses & Dissertations

A theoretical investigation of a single mode optical fiber with one and two superimposed Bragg grating is presented. The formulation relies in the determination of an approximate solution in the asymptotic region of one of the fiber parameters. A correction is then applied to the asymptotic solution using the Method of the Successive Approximations also known as the Piccard Method. The approximation was then compared to the numerical solution using the Runge-Kutta method. Assuming that each Bragg grating has modulation frequencies given by Ω₁ and Ω₂, it has been found that the second Bragg grating shifts the …

A Decision Support Model For Large Systems Using Quality Function Deployment And Goal Programming: A Capital Budgeting Problem, Kenneth Lindsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Effective planning for the modernization of U.S. Air Force fighter aircraft requires a perception of the future tasks these aircraft will be called upon to perform, and the improvements and modifications that will be required to successfully accomplish those tasks. A great deal of research has been done in the areas of military strategy, quality function deployment, capital budgeting, and goal programming, as separate areas of study. This thesis details the research and analysis performed for a project called The Fighter Configuration Plan (FICOP), in which these areas were integrated in a decision support model to aid the Air Force …