Engineering Commons^™

Lyceum: A Multi-Protocol Digital Library Gateway, Ming-Hokng Maa, Michael L. Nelson, Sandra L. Esler

Computer Science Faculty Publications

Lyceum is a prototype scalable query gateway that provides a logically central interface to multi-protocol and physically distributed, digital libraries of scientific and technical information. Lyceum processes queries to multiple syntactically distinct search engines used by various distributed information servers from a single logically central interface without modification of the remote search engines. A working prototype (http://www.larc.nasa.gov/lyceum/) demonstrates the capabilities, potentials, and advantages of this type of meta-search engine by providing access to over 50 servers covering over 20 disciplines.

An Investigation On The Effect Of Aging And Fatigue Damage On The Mechanical Properties Of A Graphite/Bismaleimide Composite, William M. Johnston Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

This investigation utilizes the open hole tension (OHT) specimen loaded in tension-tension fatigue under isothermal, fixed frequency conditions. A range of load levels and temperature levels where chosen to assess performance. These loads and temperatures ranged from relatively benign conditions (low stress, room temperature) up through aggressive conditions (high stress, high temperature). Measurements of stiffness, damage accumulation, residual strength, weight loss, and glass transition temperature (Tg) were made. Results from this work will help explain the roles of aging, load and fatigue in the performance of elevated temperature OHT specimens as well as provide insights to the individual and synergistic …

Characterization Of Iron Oxides And Atmospheric Corrosion Of Steel, Sei Jin Oh

Physics Theses & Dissertations

The study of corrosion behavior was performed using three different analytical techniques, which provided information on the formation, development and layering of iron oxides on the corrosion products as a function of atmospheric conditions, exposure time and type of steel. In particular, the protective layer formed on weathering steel was investigated as a function of different amounts of alloying elements in the steel, atmospheric conditions and exposure times. Combined together, the results provided a better understanding of the atmospheric corrosion behavior of steel, and formed a part of database of the atmospheric corrosion characteristics.

Accurate characterization of the iron oxides …

Diamond For Fiber-Optic Raman Spectroscopy, Jianli Zheng

Electrical & Computer Engineering Theses & Dissertations

Raman spectroscopy is a powerful technique for molecular structural studies and concentration measurement. Being a single beam technique, the Raman intensity depends on the optical power of the excitation source, optical alignment of the system, detector response as well as species concentration. To eliminate the unwanted variations in the system and get the concentration information of the species, intensity referencing is necessary. The existing referencing methods either use a constant Raman band of the sample, or add a chemically inert material with known concentration into the sample. Unfortunately, the former method is not always applicable and the latter is not …

Real-Time Visual Speech Articulation Training Aid, Neiyer S. Correal

Electrical & Computer Engineering Theses & Dissertations

A real-time visual articulation training aid has been implemented. It provides instantaneous visual feedback of vowel and stop-consonant production on a computer screen. The vowel training system corresponds to an improved floating-point implementation of a previous fixed-point system developed by Beck (1992). The new implementation provides better accuracy and an approximate five-fold increase in speed. Acoustic features computed from global short-time spectral shape are used for classification of vowels. Temporal spectral trajectories timed to begin with burst onset are used for stop consonants. A neural network is used to transform measurements of auditory stimuli from the feature space to a …

Parametric Correlations For Generic Scramjet Combustors With Ramp-Type Injectors, Jason Granville Bush

Mechanical & Aerospace Engineering Theses & Dissertations

Development of an efficient scramjet combustor requires the use of computational models due to the cost of full-scale physical testing in the speed regime of Mach 10 through Mach 18. This study focuses upon the database generated by one such computational model, SHIP3D, which describes a generic scramjet combustor using ramp-type file! injectors. Three generalized parametric equations have been developed from this database, which describe the fuel-air mixing efficiency within the scramjet combustor as a function of normalized-axial combustor distance, ramp injector-region lift coefficient, and stoichiometry. It is shown that one of the three equations nearly models the trends as …

Characterization Of Rainfall Runoff Quality From A Shipyard Drydock, Peter Pommerenk

Civil & Environmental Engineering Theses & Dissertations

Water quality and hydrological data were collected during seventeen rain events and additional data was obtained from laboratory experiments to characterize the quality of stormwater runoff from a drydock located on the Elizabeth River in Norfolk, Virginia.

The results indicated that the concentrations of dissolved constituents in drydock runoff increased with decreasing flow rate, while solids concentrations exhibited positive correlation to flow rate, suggesting that the mobilization of particulate matter is velocity driven. Approximating the runoff hydrograph due to a storm event using a simple model enabled derivation of the average time that rainwater resides on the drydock surface before …

Modeling A High-Efficiency Ozone Injection Contactor, L. Bernard Garrett Jr.

Civil & Environmental Engineering Theses & Dissertations

Significant research over the last several years has focused on applying modeling equations for estimating design parameters of ozone contactors. Much of this research has focused on fine bubble diffusers, which are the more widely used injection system for ozone contactors in the U.S. A recently developed design incorporates a new ozone injection system called a sidestream venturi injector (SVI) which is used with a co-current downflow column to achieve very high ozone mass transfer efficiencies. A pilot study conducted at the Harwood's Mill water treatment plant in Newport News, Virginia, from June to December 1993 demonstrated the high mass …

The Crash Simulation And Analysis Of The Friendly Mobile Barrier, Bryan Edward Marz

Mechanical & Aerospace Engineering Theses & Dissertations

Mass transportation is an ever increasing alternative being researched and evaluated in today's society. With the increase of demand for such transportation, an increase in safety is also needed. This research entails the analysis of a new idea, The Friendly Mobile Barrier, in railroad crossing barrier design. The design is meant to prevent any approaching vehicle from crossing a railroad track and be survivable for those impacting the barrier.

Research conducted involves the crash simulation and analysis of the Friendly Mobile Barrier. The Friendly Mobile Barrier was analyzed structurally using finite element analysis. An advanced lumped-mass mathematical model software, Crash …

Dynamics And Control Of A Three Dimensional Gantry Crane With Cable Flexibility, Uchendu H. Eke

Mechanical & Aerospace Engineering Theses & Dissertations

The control of payload swing in industrial gantry cranes is a topic of widespread interest. In this thesis, the control of the swing of a payload idealized by a point mass assumption is investigated utilizing s, compact robotics matrix/vector representation of the dynamical model. In this form, this particular system can be viewed as sn underactuated manipulator with equal numbers of active and passive degrees of freedom. The full three dimensional model is developed and linearized by modelling the cable as a single thread of fiexible wire and the degree of dynamic coupling between the active and passive coordinates is …

Resource/Dataflow Graph Operating System Development, Sriram J. Coimbatore

Electrical & Computer Engineering Theses & Dissertations

Implementation of a new dataflow schedule model is the objective of this thesis. The dataflow model algorithm called the resource/dataflow graph model is implemented on a peer-to-peer communication network comprising of six personal computers. This dataflow model is implemented making use of an earlier dataflow model called ATAMM (Algorithm to Architecture Mapping Model) developed by ODU and National Aeronautics and Space Administration (NASA). Development issues include modification of the RDFG testbed operating system and a scheme to transfer data buffers using the ethernet channel from one processor to another processor. This, in turn, equips each sub-module of an application with …

An Experimental Study Of An Advanced Polymeric Material For Use In Total Knee Replacements Including Gait Analysis Of Mobile Knee Bearings, Lisa Ann Scott

Mechanical & Aerospace Engineering Theses & Dissertations

The primary objectives of this research were to clinically examine the New Jersey Low Contact Stress (LCS)™ Rotating Platform and Meniscal knee bearing systems and to investigate the tribological properties of a new polymer for potential application in total joint replacement. Thus, clinical studies were performed on subjects having the LCSTM Rotating Platform knee bearing and subjects having the LCS™ meniscal knee bearing. The results indicated that there was a statistically significant difference in the braking force for both implant groups when compared to a control group. There was also a statistically significant difference noted for the LCS™ Rotating Platform …

Development And Experimental Verification Of A Finite Element Model For Ptc Panel Thermal Analysis, Hamid Sayar

Mechanical & Aerospace Engineering Theses & Dissertations

The Pyramidal Truss Core (PTC) panel is a new structural concept being used in applications requiring a high strength to weight ratio. This study is concerned with investigating the thermal characteristics of the PTC panels. In this regard, the focus of the analysis was to develop an accurate finite element model of PTC panels for thermal analysis. The resulting model included radiation mode of heat transfer as the dominant means of the heat transfer while neglecting the influence of heat transfer through natural convection. The accuracy of the developed model was verified by comparison of the finite element results with …

The Effectiveness Of Film Cooling In A Hypersonic Flowfield With Favorable Pressure Gradients, Julie A. Young

Mechanical & Aerospace Engineering Theses & Dissertations

The impetus of this technical document is to report results of aerothermodynamic cooling of a scramjet nozzle under favorable pressure gradients. The goals of film cooling are to protect the nozzle skin from the high enthalpy combustor flow, reduce regenerative cooling requirements, and decrease nozzle skin friction. A hypersonic nozzle configuration for which experimental data exists was selected as the basis of this numerical study. As a first step, the numerical results of film cooling along a flat plate are compared to previous literature to validate the numerical model. Subsequently, computations are performed to study the effects of varying the …

Effects Of Initial Geometric Imperfections On The Behavior Of Graphite-Epoxy Cylinders Loaded In Compression, William Allen Waters Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

The results of an experimental and analytical study of selected composite cylinders loaded in axial compression beyond buckling are presented. A comparison is made of buckling loads predicted by a nonlinear finite element code and those obtained from laboratory experiments. The initial geometric imperfections for each specimen were defined mathematically for inclusion in the finite element model. The experimental effort consisted of testing five graphite-epoxy cylindrical specimens. Four of the specimens were 16 plies thick; one of these had quasi-isotropic wall properties, another consisted entirely of angle plies, while the remaining specimens of this wall thickness were of two different …

Monte Carlo Simulations Of Photoemission Characteristics From Gaas And Diamond, Abhishek Srivastava

Electrical & Computer Engineering Theses & Dissertations

Monte Carlo based numerical simulations were performed to study photoemission from GaAs and diamond. The central goal was to assess the potential for NEA photoemission from diamond, and to predict its characteristics. The GaAs material system was also included in the simulation study to provide: (i) calibration and validation of the numerical model developed by carefully matching the simulation results with available experimental data, and (ii) quantitative comparisons between the response characteristics of diamond and the better known GaAs system.

Predictions of the energy distribution, temporal response and angular distribution of emitted electrons were obtained. Effects of various parameters, such …

Exploring Knowledge Processes For Technology Assimilation, Rochelle K. Young

Engineering Management & Systems Engineering Theses & Dissertations

In the emerging knowledge society, the ability to make the experience and expertise of those involved in and affected by new technology unconditionally available to all members of an organization is becoming increasingly important. One of the problems in developing such knowledge processes for technology assimilation is that current social structures do not easily accommodate unconditional participation. Since the implementation of modern information technology is changing the workplace and the nature of work itself, alternative social structures are needed. This research takes as given that deep questions concerning knowledge processes and social transformation are in principle undecidable; and, only questions …

Two-Dimensional Drift-Diffusion Simulations Of Silicon Avalanche Shaper (Sas) Devices For High Power Applications, Hamid Jalali

Electrical & Computer Engineering Theses & Dissertations

Silicon Avalanche Shaper devices have been projected as being important components of an inexpensive, semiconductor-based technology for high power switching applications. The primary advantage of this technology is that it is based on Silicon material which is easy to fabricate and has a well established processing technology. Unlike other high power technologies, the SAS devices do not rely on external optical triggering which eliminates the need for lasers and related optical circuitry.

The SAS based high power switching technology has been pioneered and tested by a Russian group. Though preliminary results have been very encouraging, the device reliability and its …

Neural Generalized Predictive Control For Real-Time Control, Donald I. Soloway

Electrical & Computer Engineering Theses & Dissertations

In this thesis a computationally efficient Generalized Predictive Control (GPC) algorithm is presented and implemented. The algorithm is more efficient than others because the number of iterations needed for convergence is significantly lower with Newton-Raphson. The main additional cost with Newton-Raphson algorithm is the calculation of the Hessian. This overhead is not a problem because of the reduced number of iterations, making the algorithm suitable for real-time control. For nonlinear control applications, a neural network is used as a dynamical system predictor leading to a Neural Generalized Predictive Control (NGPC) algorithm which is presented in detail in this thesis. An …

Energy Use Analysis Of A Multi-Unit Housing Facility A Parametric Study, Brian David Cooper

Mechanical & Aerospace Engineering Theses & Dissertations

In the continuing effort to reduce the energy use of buildings, design engineers and architects are called upon to design facilities which are more efficient and use less energy. The prediction of the energy used by a building's systems and occupants, for different design options and combinations, is an important part of the design of an energy efficient building.

An energy use analysis was conducted to determine the accuracy of a computerized building energy analysis simulation when only preliminary design information is available. Additional studies were made to determine the accuracy of the simulation as more detailed design, construction and …

Effects Of Elevated Temperature On The Physical Aging Of A High Temperature Thermoplastic Resin And Composite, Mark Feldman

Mechanical & Aerospace Engineering Theses & Dissertations

Development of a High Speed Civil Transport is considered by the commercial aviation industry to be one of the next big challenges for our national aircraft industry. Critical to the success of this aircraft is the development of advanced polymeric composites for both the primary and secondary structures and the predictive methodology necessary for assessment of long term durability. While polymeric composites offer an excellent strength to weight ratio a key disadvantage is the time dependent properties exhibited by the polymer matrix which can age and ultimately effect the resultant stiffness of a laminate.

Experimental studies were performed to determine …

An Investigation Of The Influence Of Tightening Torque And Sea Water On Pultruded Gfrp Composite Bolted Joints, Satish Devara

Mechanical & Aerospace Engineering Theses & Dissertations

Pultruded glass fiber-reinforced polymeric matrix composites are candidate materials for ever-increasing structural applications due to their continuous production capability, light weight and excellent properties. In this investigation an extensive experimental study has been carried out to understand their structure, basic mechanical properties, and influence of fiber orientation on the unnotched, notched and pin-loaded tensile strength. Furthermore, the effects of sea water and tightening torque separately and together on the failure loads and failure modes of the bolted joints are also studied. It is shown that blockshear failure mode is also a principal mode of failure in the bolted joints of …

The Noaa Corps -- A Participant Action Research Of A Uniformed Service Facing Termination, Richard Eugene Marriner Ii

Engineering Management & Systems Engineering Theses & Dissertations

The NOAA Corps is a uniformed service of the Federal Government. It is composed of officers commissioned by the President of the United States as are the officers of the Air Force, Army, Coast Guard, Marines, Navy, and Public Health Service. "NOAA" is the acronym for the National Oceanic and Atmospheric Administration, an agency within the U.S. Department of Commerce.

On January 24, 1996 the Clinton administration formally proposed that the NOAA Corps be terminated on October 1, 1996. If this were to become reality it would be the first time in U.S. History that a uniformed service has been …

Long-Term Effects Of Seawalls On The Adjacent Nonwalled Beaches Of A Historically Receding Shoreline, Bryan Norton Jones

Civil & Environmental Engineering Theses & Dissertations

Great debate has arisen in recent years over the effects seawalls may or may not have on the erosion rate of a historically receding shoreline. A primary obstacle to the formation of definite conclusions about this subject is the lack of long-term physical data, which must be collected prior to and following seawall construction. This thesis presents the results of a study using 15 years of beach profile data to determine how seawalls influence the existing erosional trends of the beach at Sandbridge, Virginia.

Three analysis methods using three time scales (historic, seasonal, and storms) were used to answer three …

A Study Of The Numerical Implementation Of Multidisciplinary Design Optimization Strategies, Rodney A. Taylor

Mechanical & Aerospace Engineering Theses & Dissertations

Design optimization provides an organized, systematic, and efficient method for obtaining design improvements based upon a specified measure of design performance. In the multidisciplinary design optimization (MDO) environment efficient optimization techniques allow complex designs to be improved by managing conflicting disciplinary design goals so as to improve the global design. This thesis studies the implementation issues surrounding MDO techniques and strategies. To facilitate this investigation two testbed problems have been selected for study. These problems consider two approaches to the conceptual design of an aeroelastic wing. The first approach is based on an idealized, two-dimensional representation of an airfoil under …

Progressive Failure Analysis Methodology For Laminated Composite Structures, David Wayne Sleight

Mechanical & Aerospace Engineering Theses & Dissertations

A progressive failure analysis model has been developed for predicting the nonlinear response and failure of laminated composite structures. The progressive failure analysis uses C¹ plate and shell elements based on classical lamination theory to calculate the in-plane stresses. Several failure criteria, including the maximum strain criterion, Hashin's criterion, and Christensen's criterion, are used to predict the failure mechanisms and several options are available to degrade the material properties after failures. The progressive failure analysis model is implemented in COMET and can predict the damage and response of a laminated composite structures from initial loading to final failure.

Numerical Prediction Of Turbulent Diffusion Flames Formed By Cylindrical Tube Injector, Ali S. Kheireddine

Mechanical & Aerospace Engineering Theses & Dissertations

This work summarizes numerical results for a diffusion flame formed from a cylindrical tube fuel injector, issuing gaseous fuel jet vertically in a quiescent atmosphere. Both pure fuels as well as fuel mixtures are examined. The primary objective is to predict the flame base height as a function of the jet velocity. A finite volume scheme is used to discretize the time-averaged Navier-Stokes equations for the reacting flow, resulting from the turbulent fuel jet motion. The turbulent stresses, and heat and mass fluxes are computed from the Reynolds stress turbulence model. A chemical kinetics model involving a two-step chemical reaction …

Comprehensive Conjunctive-Use Management Of Connected Surface Water Groundwater Systems Using Stochastic Inputs And Uncertainties, Seshadri Suryanarayana

Civil & Environmental Engineering Theses & Dissertations

A comprehensive conjunctive-use management model is developed. The dynamics of flow and solute transport processes in connected surface water groundwater systems are integrated by a dual programming management model. The governing aquifer flow parameters and streamflows are treated as stochastic random processes. Multiple realizations of the random field are generated and are explicitly incorporated in a non-linear optimization model along with other system, environmental, and management constraints. To facilitate management of large aquifer systems, a linked simulation-optimization approach is used. The simulation program generates the response matrices for flow and transport processes. The management model then determines optimal well discharges …

Lattice Truss Structural Response Using Energy Methods, Winfred Scottson Kenner

Mechanical & Aerospace Engineering Theses & Dissertations

A deterministic methodology is presented for developing closed-form deflection equations for two-dimensional and three-dimensional lattice structures. Four types of lattice structures are studied: beams, plates, shells and soft lattices. Castigliano's second theorem, which entails the total strain energy of a structure, is utilized to generate highly accurate results. Derived deflection equations provide new insight into the bending and shear behavior of the four types of lattices, in contrast to classic solutions of similar structures. Lattice derivations utilizing kinetic energy are also presented, and used to examine the free vibration response of simple lattice structures. Derivations utilizing finite element theory for …

Visual Speech Recognition Using Multiple Deformable Lip Models, Devi Chandramohan

Electrical & Computer Engineering Theses & Dissertations

Motivated by the fact that human speech perception is a bimodal process (auditory and visual), several researchers have designed and implemented automatic speech recognition (ASR) systems consisting of both audio and visual subsystems, and shown improved performance relative to traditional purely auditory systems. Several visual speech reading approaches have used deformable templates to model the shape of a speaker's lips. Deformable templates are models of image objects, which can be deformed by adjusting a set of parameters to match the object in some optimal way, as defined by a cost function. Using a single deformable lip model has disadvantages such …