Engineering Commons^™

Source Identification Of Ammonia Inputs To The Wastewater Treatment Holding Pond At International Paper Franklin Mill, Melissa Riddick Wolford

Civil & Environmental Engineering Theses & Dissertations

While nitrogen is an essential nutrient in aquatic systems, elevated levels of nitrogen can be fatal to many aquatic organisms including fish and other organisms that are in the river. Elevated levels of ammonia have been recently (2001-2002) detected in the water released from a wastewater treatment system holding pond at International Paper Franklin, Virginia and are a concern for the receiving system. The elevated ammonia concentrations observed in previous years were not observed in 2003, due likely to increased precipitation and the occurrence of a major hurricane (Hurricane Isabel) during the sampling period that may have influenced the observations. …

Extension Of A Cross-Shore Beach Profile Model For Coarse Materials And Steep Slopes, Kentaro Hayashi

Civil & Environmental Engineering Theses & Dissertations

In the present SBEACH model, the effective grain size can range from 0.13 to 1.0 mm. The grain size greatly influences three main processes of the model: fall velocity, sediment transport direction, and sediment transport rate. First, the theory of the fall velocity, which is called Hallermeier's formula in the SPM (1984), is replaced by the new theory in the CEM (2002). Second, the sediment transport direction is changed by two criteria. One was developed by Sunamura and Horikawa (1974). This theory includes the beach slope. The other was derived by Ahrens and Hands (2000). The effective grain size range …

Generic Performance Evaluation Tool Implementation For An Imaging Fourier Transform Spectrometer, James M. Mengert

Electrical & Computer Engineering Theses & Dissertations

Evaluation software for analyzing general analytical model applications utilizing MATLAB is presented in this thesis. The focus is to provide an interactive environment for the evaluation of model applications relating to an Imaging Fourier Transform Spectrometer. The Generic Performance Evaluation Tool (GPET) was developed by researchers at Old Dominion University and NASA-Langley Research Center and was a NASA-Langley Research Center sponsored project. GPET is capable of producing a multitude of object-oriented input data for any number of individual model applications. The tool is also capable of creating user-defined input interfaces for the purpose of viewing and/or editing input object data, …

Models, Composability, And Validity, Eric Werner Weisel

Computational Modeling & Simulation Engineering Theses & Dissertations

Composability is the capability to select and assemble simulation components in various combinations into simulation systems to satisfy specific user requirements. The defining characteristic of composability is the ability to combine and recombine components into different simulation systems for different purposes. The ability to compose simulation systems from repositories of reusable components has been a highly sought after goal among modeling and simulation developers. The expected benefits of robust, general composability include reduced simulation development cost and time, increased validity and reliability of simulation results, and increased involvement of simulation users in the process. Consequently, composability is an active research …

Numerical Study Of Combustion Of Hydrogen And Ethylene In A Two-Dimensional Dual-Mode Scramjet Combustor, Robert A. Carson

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents computational fluid dynamics results for two-dimensional flow geometries utilizing two fuels, hydrogen (H2) and ethylene (C2H4). Upstream interaction was evident with the use of both fuels due in part to recirculation in the combustor, the inlet pressures and the combustion process. Results were obtained for hydrogen using a reduced chemical kinetic model while results obtained for ethylene employed a reduced chemical kinetic model as well as an expanded chemical kinetic model.

Initially, an examination of grid composition was conducted in order to select the most numerically efficient and accurate grid for reacting flow in the current combustor …

Generating Series For Interconnected Nonlinear Systems And The Formal Laplace-Borel Transform, Yaqin Li

Electrical & Computer Engineering Theses & Dissertations

Formal power series methods provide effective tools for nonlinear system analysis. For a broad range of analytic nonlinear systems, their input-output mapping can be described by a Fliess operator associated with a formal power series. In this dissertation, the inter connection of two Fliess operators is characterized by the generating series of the composite system. In addition, the formal Laplace-Borel transform of a Fliess operator is defined and its fundamental properties are presented. The formal Laplace-Borel transform produces an elegant description of system interconnections in a purely algebraic context.

Specifically, four basic interconnections of Fliess operators are addressed: the parallel, …

Scaling And Characterization Of Direct Current Glow Discharge Plasma In Atmospheric Air, Abdel-Aleam Hefney Mohamed

Electrical & Computer Engineering Theses & Dissertations

A microhollow cathode discharge was used as a plasma cathode to sustain a stable direct current glow discharge in atmospheric pressure air. The volumetric scale of glow discharge increased from the millimeter to the centimeter range by extending the plasma in lateral and axial directions. In the axial direction, the length of the glow discharge column was varied from 1 mm to 2 cm, with the sustaining voltage increasing linearly with the glow discharge column length. Extension in the lateral direction was obtained by operating discharges in parallel. The glow discharge plasma of the parallel discharge columns was found to …

Microdischarge Arrays, Wenhui Shi

Electrical & Computer Engineering Theses & Dissertations

Microhollow cathode discharges (MHCDs) are DC or pulsed gas discharges between two electrodes, separated by a dielectric, and containing a concentric hole. The diameter of the hole, in this hollow cathode configuration, is in the hundred-micrometer range. MHCDs satisfy the two conditions necessary for an efficient excimer radiation sources: (1) high energy electrons which are required to provide a high concentration of excited or ionized rare gas atoms; (2) high pressure operation which favors excimer formation (a three-body process). Flat panel excimer sources require parallel operation of MHCDs. Based on the current-voltage characteristics of MHCD discharges, which have positive slopes …

Computational Sensing And Active Flow Control Of Airfoil At Stall Conditions, Ersin Gercek

Mechanical & Aerospace Engineering Theses & Dissertations

During airfoil stall condition, the flow over airfoil loses its momentum, creating high pressure zones and adverse pressure gradients on the airfoil upper surface. When the adverse pressure forces and viscous forces get greater than the flow momentum, the flow can no longer remain attached on the surface and separates towards a low pressure zone.

In order to eliminate separation, the low momentum flow on the suction side should be predicted and removed from the airfoil surface to maintain high momentum and low pressure flow conditions over the airfoil. This study is conducted to apply active computational sensing and control …

Speaker Normalization For Improved Automatic Speech Recognition For Digital Libraries, Wei Wang

Electrical & Computer Engineering Theses & Dissertations

The context of this thesis work is the improvement of automatic speech recognition (ASR) for use with digital libraries. First, commonly used multimedia file formats and codecs are surveyed with the objective of identifying those formats that preserve speech quality while keeping file sizes compact. The main contribution of the work is a new technique for speaker adaptation based on frequency scale modifications. The frequency scale is modified using a minimum mean square error matching of a spectral template for each speaker to a "typical speaker" spectral template. Each spectral template is computed from the average amplitude-normalized spectra of several …

Astronaut Eva Exposure Estimates From Cad Model Spacesuit Geometry, Giovanni De Angelis, Brooke M. Anderson, William Atwell, John E. Nealy, Gary D. Qualls, John W. Wilson

Mathematics & Statistics Faculty Publications

Ongoing assembly and maintenance activities at the International Space Station (ISS) require much more extravehicular activity (EVA) than did the earlier U.S. Space Shuttle missions. It is thus desirable to determine and analyze, and possibly foresee, as accurately as possible what radiation exposures crew members involved in EVAs will experience in order to minimize risks and to establish exposure limits that must not to be exceeded. A detailed CAD model of the U.S. Space Shuttle EVA Spacesuit, developed at NASA Langley Research Center (LaRC), is used to represent the directional shielding of an astronaut; it has detailed helmet and backpack …

Using Web Services To Integrate Heterogeneous Simulations In A Grid Environment, J. Mark Pullen, Ryan Brunton, Don Brutzman, David Drake, Michael Hieb, Katherine L. Morse, Andreas Tolk

Computational Modeling & Simulation Engineering Faculty Publications

The distributed information technologies collectively known as Web services recently have demonstrated powerful capabilities for scalable interoperation of heterogeneous software across a wide variety of networked platforms. This approach supports a rapid integration cycle and shows promise for ultimately supporting automatic composability of services using discovery via registries. This paper presents a rationale for extending Web services to distributed simulation environments, including the High Level Architecture (HLA), together with a description and examples of the integration methodology used to develop significant prototype implementations. A logical next step is combining the power of Grid computing with Web services to facilitate rapid …

Writing Reflective Case Studies For The Engineering Management Journal (Emj), Timothy Kotnour, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

This paper's intent is to help authors write reflective case studies for the Engineering Management Journal (EMJ). We offer a process to convert an applied research project with an organization to an EMJ manuscript. Writing a reflective case study is a process of abstracting experiences into approaches, processes, tools, challenges, and "lessons" for a broad audience of engineering managers. This paper serves as a guide for authors to write reflective case studies.

Including Organizational Cultural Parameters In Work Processes, Holly A. H. Handley, Nancy J. Heacox

Engineering Management & Systems Engineering Faculty Publications

Recent work in modeling decision-making work processes has focused on including the national culture of individual decision-makers in order to emphasize the differences in decision criteria between decision-makers of different nationalities. In addition to nationality, a decision-maker is also a member of an organization and brings this organizational culture to his role in the work process, where it may also affect his task performance. In order to represent the organizational impact on the work process, five organizational cultural parameters were identified and included in an algorithm for modeling and simulation of cultural difference in human decision-making. While the five modifiers …

Excimer Emission From Cathode Boundary Layer Discharges, Mohamed Moselhy, Karl H. Schoenbach

Bioelectrics Publications

The excimer emission from direct current glow discharges between a planar cathode and a ring-shaped anode of 0.75 and 1.5 mm diameter, respectively, separated by a gap of 250 μm, was studied in xenon and argon in a pressure range from 75 to 760 Torr. The thickness of the “cathode boundary layer” plasma, in the 100 μm range, and a discharge sustaining voltage of approximately 200 V, indicates that the discharge is restricted to the cathode fall and the negative glow. The radiant excimer emittance at 172 nm increases with pressure and reaches a value of 4 W/cm² for …

Microscopic Analysis For Water Stressed By High Electric Fields In The Prebreakdown Regime, R. P. Joshi, J. Qian, K. H. Schoenbach, E. Schamiloglu

Bioelectrics Publications

Analysis of the electrical double layer at the electrode-water interface for voltages close to the breakdown point has been carried out based on a static, Monte Carlo approach. It is shown that strong dipole realignment, ion-ion correlation, and finite-size effects can greatly modify the electric fields and local permittivity (hence, leading to optical structure) at the electrode interface. Dramatic enhancements of Schottky injection, providing a source for electronic controlled breakdown, are possible. It is also shown that large pressures associated with the Maxwell stress tensor would be created at the electrode boundaries. Our results depend on the ionic density, and …

Electrical Breakdown In Polar Liquids, Shu Xiao

Electrical & Computer Engineering Theses & Dissertations

Hydrodynamic processes following the electrical breakdown in polar liquids, mainly water and propylene carbonate, are studied with electrical pulse-probe systems and optical diagnostics including shadowgraphy and Schlieren techniques. The dielectric strength of water in a repetitively pulsed power system is found to be 750 kV/cm and 650 kV/cm for pulses of 200 nanosecond and 8 microsecond duration, respectively. For energies less than 1 J, the discharge plasma decays in approximately one microsecond. The mechanical effect created by the expanding plasma is a shock wave which has an initial pressure of 1 GPa and decays within approximately 5 microseconds. The observed …

Hydrologic Variations Within Created And Natural Wetlands In Southeastern Virginia, Aaron Dyer Despres

OES Theses and Dissertations

The hydrology of wetlands, particularly how wetland soils collect, store, and redistribute water strongly affects how wetland systems function. In created wetlands, construction processes and materials influence the hydrology and consequently, the potential for successful reestablishment of target vegetation communities. During 2002–2004, the Virginia Department of Transportation constructed large mitigation wetlands on two different Quaternary aged surfaces with very similar hydrogeomorphic conditions. The Sandy Bottom Nature Park site (SBNP) located in Hampton, VA and rests on the sandy loam Tabb Formation while the Charles City Wetland site (CCW) lies on the older and clay-rich Shirley Formation. This study documents and …

Mapping Of Thermo-Fluids Laboratory Experiments Into Web-Based Experiments, Sushil Chaturvedi, Rick Mckenzie, O. A. Akan, A. Priyadershini

Mechanical & Aerospace Engineering Faculty Publications

A methodology is being developed for transforming physical experiments from the undergraduate thermo-fluids laboratory into a web-based virtual experiments. Important characteristics of physical experiments are identified in order to preserve them in physical to virtual domain mapping. Several commercially available software are employed to incorporate in the web-based experiments characteristics such as recreation of physical phenomenon in the virtual domain, measurement of physical quantities on a computer screen, assembly of virtual probes and coupling of the virtual experiment with a data acquisition software. A virtual reality software has been incorporated to enable web-based students to navigate through the virtual laboratory, …

Design Optimization Module For Hierarchical Research And Learning Environment, Oktay Baysal, Mehti Koklu, Ahmed K. Noor

Mechanical & Aerospace Engineering Faculty Publications

The present paper describes a learning module on design optimization courses within a hierarchical research and learning network (HRLN). In this environment a knowledge organization can be created as a hierarchical learning network to link diverse inter- and trans- disciplinary teams from a consortium of universities, industry, government agencies and the providers of learning technologies. It is an approach that builds on computer-based training, intelligent tutoring systems, interactive learning, collaborative-distributed learning, and learning networks. The present design optimization module has been developed and described herein, as a demonstrator of a learning module in this environment. This module allows for the …

Fantasy And The Concert Hall: Musical Performance In The Electroacoustic Age, Matthew Malsky

Reconstruction: Studies in Contemporary Culture

[First paragraph]

In 1941, the famously despondent Theodor Adorno worried about the detrimental effects of radio broadcast upon the symphony. He theorized that much of value was lost when listeners experienced an orchestral performance of a composition in symphonic form through its electronic transmission to their kitchens rather than in a concert hall. Based upon empirical research done in collaboration with Paul Lazarsfeld and the Princeton Radio Research Project, he argued that the presence of music was lost to the radio listener, and with it a part of music's auratic spell, its uniqueness in time and place, its ritual, cultish …

Stimulation Of Capacitative Calcium Entry In Hl-60 Cells By Nanosecond Pulsed Electric Fields, Jody A. White, Peter F. Blackmore, Karl H. Schoenbach, Stephen J. Beebe

Bioelectrics Publications

Nanosecond pulsed electric fields (nsPEFs) are hypothesized to affect intracellular structures in living cells providing a new means to modulate cell signal transduction mechanisms. The effects of nsPEFs on the release of internal calcium and activation of calcium influx in HL-60 cells were investigated by using real time fluorescent microscopy with Fluo-3 and fluorometry with Fura-2. nsPEFs induced an increase in intracellular calcium levels that was seen in all cells. With pulses of 60 ns duration and electric fields between 4 and 15 kV/cm, intracellular calcium increased 200-700 nM, respectively, above basal levels (similar to100 nM), while the uptake of …

Development Of An Expert Judgement Elicitation And Calibration Methodology For Risk Analysis In Conceptual Vehicle Design, Resit Unal, Charles Keating, Bruce Conway, Trina Chytka

Engineering Management & Systems Engineering Faculty Publications

A comprehensive expert-judgment elicitation methodology to quantify input parameter uncertainty and analysis tool uncertainty in a conceptual launch vehicle design analysis has been developed. The ten-phase methodology seeks to obtain expert judgment opinion for quantifying uncertainties as a probability distribution so that multidisciplinary risk analysis studies can be performed. The calibration and aggregation techniques presented as part of the methodology are aimed at improving individual expert estimates, and provide an approach to aggregate multiple expert judgments into a single probability distribution. The purpose of this report is to document the methodology development and its validation through application to a reference …

An Understanding Of The Application Of Research Methods In Engineering Management, Andres Sousa-Poza, Rafael Landaeta, Leonardo Bedoya, Ipek Bozkurt, Yaneth Correa

Engineering Management & Systems Engineering Faculty Publications

In this article, the use of research methods in the field of Engineering Management is analyzed. For this study, a database was formed by using articles from three journals in the Engineering Management field: the Engineering Management Journal (EMJ), the IEEE Transactions on Engineering Management and the Journal of Engineering and Technology Management (JETM). Articles written between 1999 and 2003 were analyzed and an Engineering Management research position map was developed to describe holistically the research methods being used in Engineering Management. No judgment on the Engineering Management field per se was undertaken as a result of this study. Instead, …

Project-Based Freshmen Engineering Courses In Civil Engineering Technology, Vernon W. Lewis Jr., Carol L. Considine

Engineering Technology Faculty Publications

Old Dominion University (ODU) has developed two fundamental courses for freshmen engineering students. The first course introduces the fundamentals of the practice of engineering including innovation, creativity, design and manufacturing, commercialization, teaming skills, environmental impact, and ethics. The second course is an exploration of engineering and engineering technology disciplines with an emphasis on projects. The purpose of these courses is to engage the students in the application of engineering early in their course of study with the hope that their interest will be reinforced and the likelihood of their being retained as students will increase. The courses are divided into …

Photonic Band Gap Analysis Using Finite-Difference Frequency-Domain Method, Shangping Guo, Feng Wu, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

A finite-difference frequency-domain (FDFD) method is applied for photonic band gap calculations. The Maxwell’s equations under generalized coordinates are solved for both orthogonal and non-orthogonal lattice geometries. Complete and accurate band gap information is obtained by using this FDFD approach. Numerical results for 2D TE/TM modes in square and triangular lattices are in excellent agreements with results from plane wave method (PWM). The accuracy, convergence and computation time of this method are also discussed.

Promoting Faculty Development With Asee/Nasa Fellowship Programs- Parametric Study Of Laser Beam Cutting (Lbc) Processes- A Case Study, Alok K. Verma, Gary R. Crossman, Carl J. Voglewede, Thomas J. Burns

Engineering Technology Faculty Publications

American Society for Engineering Education (ASEE) and National Aeronautics and Space Administration (NASA) offer a joint program for faculty and research development. This program known as ASEE/NASA Faculty Fellowship program offers opportunities for professional development for Engineering Technology faculty. This paper discusses one such experience involving applied research at NASA Langley Research Center, which resulted in professional development of the faculty member while enhancing the undergraduate curriculum in Engineering Technology.

Enhancing Met Curriculum With Applied Research Experience For Faculty Parametric Study Of Water Jet Cutting Processes- A Case Study, Alok K. Verma, Cheng Y. Lin, Carl J. Voglewede, Mike E. Tall

Engineering Technology Faculty Publications

In today's global competitive environment, the engineering technology curriculum must adopt and reflect the changing needs of industry. This can happen only if the faculty are aware of the current trends in industry and are actively involved with industry and research projects. ASEE/NASA Faculty Fellowship program offers opportunities for professional development for Engineering Technology faculty. A parametric study of water jet cutting (WJC) process was done under the ASEE / NASA faculty fellowship program at NASA Langley Research Center. This research experience has been used to enhance undergraduate curriculum in Mechanical Engineering Technology at Old Dominion University (ODU).

Computation Of Shock Induced Noise In Imperfectly Expanded Supersonic Jets, Bulent Imamoglu

Mechanical & Aerospace Engineering Theses & Dissertations

Screech noise exists only in imperfectly expanded jets. The exit pressure of imperfectly expanded jets does not match ambient pressure, so expansion or compression waves appear out of the nozzle and generate shock cell patterns. Screech is generated by the interaction of shock cells and instability waves. Many experiments and computations have been done to model screech noise, but it is not yet a very well known subject.

A numerical study is performed to understand screech generation mechanisms and to compare with latest experiments. A supersonic underexpanded jet of 25.4 mm diameter is modeled for cases of Mach numbers of …

Design And Analysis Of An Air Filter Sensor For A Residential Heating And Cooling System, Cheng Y. Lin, Steve C. Hsiung, Alok K. Verma, Gary R. Crossman

Engineering Technology Faculty Publications

This is a design project of an air-filter sensor to be used in home heating and cooling system. The project includes conceptual design, analysis, implementation, tests and modifications. First, the air quality and power consumption between a clean air filter and a dirty air filter is studied. Then, a photo sensor circuit with an ultra high brightness LED emitter and a phototransistor receiver is used to detect dust particles. A red warning LED lights up when a specified amount of dust is collected on the filter and blocks the light beam between the emitter and the receiver. The emitter and …