Engineering Commons^™

Nonlinear Flutter Of Curved Panels Under Yawed Supersonic Flow Using Finite Elements, Mohamed Salim Azzouz

Mechanical & Aerospace Engineering Theses & Dissertations

In the extensive published literature on panel flutter, a large number of papers are dedicated to investigation of flat plates in the supersonic flow regime. Very few authors have extended their work to flutter of curved panels. The curved geometry generates a pre-flutter behavior, triggering a static deflection due to a static aerodynamic load (SAL) over the panel as well as dynamic characteristics unique to this geometry. The purpose of this dissertation is to provide new insights in the subject of flutter of curved panels. Finite element frequency and time domain methods are developed to predict the pre/post flutter responses …

Multi-National Project Team Communications And Cultural Influences, Morgan E. Henrie

Engineering Management & Systems Engineering Theses & Dissertations

This exploratory case study dissertation examined multinational project teams' communication satisfaction as influenced by the project team's cultural attribute of power distance. Utilizing a exploratory case study, semi-guided interview research approach, ordinal scale data and open-ended contextual based question responses was obtained. This data was gathered from United States---Russia and Canada---Angola multi-national, complex, high technology oil transportation project teams. Triangulation data gathering techniques were utilized to obtain empirical data from multiple sources of data and multiple data types. Subsequent data analyses combined descriptive statistical analysis, graphical analysis, cluster analysis, and content analysis techniques to derive a theoretical construct of multi-national …

Ridding Ships' Ballast Water Of Microorganisms, Fred C. Dobbs, Andrew Rogerson

OES Faculty Publications

( First paragraph) A complex assemblage of microorganisms exists in nearly every aquatic system on earth. In lakes and oceans, every milliliter of water contains about 10² protists (single-celled eukaryotes), 10⁶ bacteria, and 10⁷–10⁹ viruses. Therefore, billions of microorganisms inevitably enter ships’ ballast tanks during normal operations. It has been argued that microorganisms must certainly be frequent invaders of coastal ecosystems, given the high densities of bacteria and viruses in ballast water—10⁸ and 10⁹ organisms per liter, respectively (1)—their potentially high reproductive rates, broad tolerances to physical conditions, and ability to form resting …

Bioengineering Instructional Framework For Technology Education, Philip A. Reed, Technology Education Department, Old Dominion University, Virginia Bioengineering Writing Team

STEMPS Faculty Publications

No abstract provided.

Condensation On (002) Graphite Of Liquid Bismuth Far Below Its Bulk Melting Point, M. K. Zayed, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Condensation of thermally evaporated Bi on (002) graphite, at temperatures of 300-523K, was studied using in situ reflection high-energy electron diffraction (RHEED) and room temperature ex situ atomic force microscopy (AFM). For deposition at temperatures below 415±5K, transmission RHEED patterns of Bi appeared at an average thickness of ∼0.5 monolayer (ML). AFM images showed that the film consisted of crystallites in the shape of triangular step pyramids with step heights corresponding to single and double Bi layers in the [111] direction. This morphology indicates crystallization from the vapor. For deposition at higher temperatures, diffuse RHEED patterns appeared independent of the …

Stem Initiatives: Stimulating Students To Improve Science And Mathematics Achievement, Robert Q. Berry Iii, Philip A. Reed, John M. Ritz, Cheng Y. Lin, Steve Hsiung, Wendy Frazier

STEMPS Faculty Publications

The article focuses on how concepts in science, technology education, and mathematics show powerful relationships when it comes to student learning. Learning theorists believe that, through designed learning environments (contexts) and learning with hands-on projects, new knowledge can not only be learned, but learned in such a way that the knowledge can be transferred for other applications. Scholars in the applied sciences (school science, technology, and mathematics) believe that these subjects have transfer among themselves and that engineering activities can establish the contexts to learn these subjects, plus aid in the transfer of knowledge. This collaborative movement is referred to …

Implementing Simple Protocols In Multiple Processors Control Applications, Steve Hsiung, Tyson Mccall, Corinne Ransberger

Engineering Technology Faculty Publications

Using microprocessor/microcontroller in various control applications is not only one of the major topics in Engineering Technology curricula, but also of interest in industry applications. To accomplish it correctly the process of designing application programs starts from the individual module development through extensive testing, verification, and modification. Applying these developed modules in a useful manner requires the links and integrations that lead to the practical project implementation. Frequently, in students' senior project designs and faculty's research plans, the microprocessor/microcontroller resources become scarce or cause conflicts during the modules' integration stage. To accommodate the shortfall of the resources and resolve any …

A Template Functional-Gage Design Using Parameter-File Table In Autodesk Inventor, Cheng Lin, Moustafa Moustafa

Engineering Technology Faculty Publications

A systematic approach using Autodesk Inventor to design the functional gages of Geometric Dimensioning & Tolerancing (GD&T) is presented. The gages can be used to check straightness, angularity, perpendicularity, parallelism, and position tolerances of a part when geometric tolerances are specified with Maximum Material Condition (MMC). Four steps are proposed to accomplish the task: (1) creation of two-dimensional (2-D) initial template files, (2) generation of hierarchical folders for the template files, (3) creation a 3-D gage model from a specific template file, and (4) dimensioning and generation of the gage drawing. Results show that, by following this approach, students can …

Management Of Extremes In The Configuration Of Interoffice Telephone Switch & Priority Systems, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

This paper describes how to enable diverse enterprise customers for voice-data switch to achieve in configuration a balance among users, features, and perceived reliability subject to extremes of traffic. The analysis entailed the simulation of the voice-data switch with embedded priority system, generation of latency times for various configurations and transaction traffic rates, and the development of a framework and theoretical propositions for configuration of super-saturated systems. It was shown that the concept of tolerance levels defined in the risk of extreme events can be applied for embedded priority systems and was the basis for the application of the zone-configuration …

Complex System Transformation: A System Of Systems Engineering (Sose) Perspective, Charles B. Keating, Andres Sousa-Poza, Samuel Kovacic

Engineering Management & Systems Engineering Faculty Publications

The purpose of this paper is to develop a perspective for complex system transformation from a System of Systems Engineering (SoSE) viewpoint. This is a first attempt to make explicit a SoSE viewpoint on complex system transformation. As such, the formulation is intended to escalate the dialog and integrate the current state of understanding with respect to the nature, utility, and implications of complex system transformation in SoSE terms. To achieve our purpose we will: (1) present a short introduction that provides an essential background for SoSE, (2) provide five fundamental systems concepts that underlie a SoSE perspective of complex …

Managing The Transformation Of System Of Systems Engineering, Samuel F. Kovacic, Andres Sousa-Poza

Engineering Management & Systems Engineering Faculty Publications

SOSE methodologies exist that support engineering difficult and disparate systems with a technical solution. However, from literature it is apparent that there is a need for a formal methodology and methods that govern engineering of System of Systems (SOS) beyond the technical solution. This paper presents some of the current thinking being undertaken at NCSOSE (National Centers for Systems of Systems Engineering), on what is driving the development of SOSE, and a hypothesized solution to this problem. The purpose is to offer a different approach for resolving complexity within a situation. The paper concludes with an initial derivative of a …

The Administration Of Senior Design Projects In A Distance Learning Environment, Isaac L. Flory Iv, John R. Hackworth

Engineering Technology Faculty Publications

A method for administering a senior level capstone design course in Electrical Engineering Technology in a distance learning environment is described. Several avenues are explored that help the students successfully conceive, develop, and present their design projects from off- campus locations that are consistent with the requirements placed upon their on-campus peers. Several problems that are unique to offering a senior project course in a distance learning environment are explored and solutions are described.

Complex System Contextual Framework (Cscf): A Grounded-Theory Construction For The Articulation Of System Context In Addressing Complex Systems Problems, W. B. Max Crownover

Engineering Management & Systems Engineering Theses & Dissertations

The complexity of problems facing society continues to grow, and decision-makers and problem-solvers are finding many of today's emerging problems to be beyond their capability to adequately address. There is agreement in the literature that problems of this nature are complex system problems, inextricably linked to some highly complex system of systems. Establishing a clear understanding of the specific complex system context is fundamental to the process of understanding and analyzing complex systems and complex system problems across all of the different systems-based disciplines. While complex system context is widely referred to in systems literature, there is no clear characterization …

Modeling And Simulation Of Photonic Crystal Fibers And Distributed Feedback Photonic Crystal Fiber Lasers, Feng Wu

Electrical & Computer Engineering Theses & Dissertations

A photonic crystal fiber (PCF) is comprised of a solid or air core surrounded by periodically arranged air holes running along the length of the fiber, which guides light in a fundamentally new way compared to conventional optical fibers, affecting almost all areas of optics and photonics. To analyze the dispersion and loss properties of PCFs, a two-dimensional (2D) finite-difference frequency-domain (FDFD) method combined with the technique of perfectly matched layer (PML) is developed. The propagation constant and loss can be obtained with accuracies in the orders of ∼10-6 and ∼10 -3, respectively.

The Bragg fiber is a kind of …

Physical Simulations In Classroom As A Pedagogical Tool For Enhancing Manufacturing Instruction In Engineering Technology Programs, Alok K. Verma, Han P. Bao, Anand Ghadmode, Swanand Dhayagude

Engineering Technology Faculty Publications

Lean is a powerful philosophy that advocates minimization of waste within an organization. The adoption of Lean Manufacturing philosophy by major manufacturers has created a demand for qualified personnel in this area. Higher education is not far behind in incorporating this philosophy into their curriculum. A number of universities have started offering both graduate and undergraduate courses in Lean Manufacturing. Physical simulations are often an integral part of these courses. Simulation based Lean enterprise concepts have been introduced in an undergraduate course in mechanical engineering technology program at Old Dominion University. Results show increased student participation and better understanding of …

Lessons Learned And Best Practices For Using An Analytic Strategy Approach For The Creation Of Virtual Laboratories For Distance Learning In Engineering Technology, Anthony W. Dean, Carol L. Considine, Gary R. Crossman

Engineering Technology Faculty Publications

This paper describes the use of an Analytic Strategy Approach used in the development of a Virtual Automation and Controls Lab in the Mechanical Engineering Technology Program of the Engineering Technology Department at Old Dominion University. This paper looks at the three phases, as applied to the development of a virtual lab using an analytic strategy design:

(1) Formulation of the quantitative and qualitative approach to assist in decision process,

(2) Quantitative and qualitative analysis of the decision alternatives - within the decision context,

(3) Interpretation of the analysis results and implications for decision.

Privatization Initiatives: A Source For Engineering Economy Case Studies, Paul Kauffmann, Tarek Abdel-Salam, Keith Williamson, Carol L. Considine

Engineering Technology Faculty Publications

A case study method which reviews the basic structure of the circular A-76 privatization decision model is discussed. It highlights the possibilities for development of case studies that can challenge student teams to apply engineering economy tools while developing skills in a range of circular areas that are important to undergraduate engineering education and career success in engineering practice. Beyond building quantitative and qualitative business analysis skills, engineering economy cases can enhance student skills in other topical areas such as technical presentations, and report writing. The privatization initiatives and related decision models can also enhance human relations oriented skills in …

Room-Temperature Atmospheric Pressure Plasma For Biomedical Applications, Mounir Laroussi, Xinpei Lu

Electrical & Computer Engineering Faculty Publications

As low-temperature non-equilibrium plasmas come to play an increasing role in biomedical applications, reliable and user-friendly sources need to be developed. These plasma sources have to meet stringent requirements such as low temperature (at or near room temperature), no risk of arcing, operation at atmospheric pressure, preferably hand-held operation, low concentration of ozone generation, etc. In this letter, we present a device that meets exactly such requirements. This device is capable of generating a cold plasma plume several centimeters in length. It exhibits low power requirements as shown by its current-voltage characteristics. Using helium as a carrier gas, very little …

Performance Analysis And Validation Of A Recoverable Flight Control System In A Simulated Neutron Environment, Hong Zhang, W. Steven Gray, Oscar R. Gonzalez

Electrical & Computer Engineering Faculty Publications

This paper introduces a class of stochastic hybrid models for the analysis of closed-loop control systems implemented with NASA's Recoverable Computer System. Such Recoverable Computer Systems have been proposed to insure reliable control performance in harsh environments. The stochastic hybrid models consist of either a stochastic finite-state automaton or a finite-state machine driven by a Markov input, which in turn drives a switched linear discrete-time dynamical system. Their stability and output tracking performance are analyzed using an extension of the existing theory for Markov jump-linear systems. For illustration, a stochastic hybrid model is used to calculate the tracking error performance …

Self-Assembly Of Ge Quantum Dots On Si(100)- 2×1 By Pulsed Laser Deposition, M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Self-assembled Ge quantum dots are grown on Si(100)- 2×1 by pulsed laser deposition. The growth is studied by in situ reflection high-energy electron diffraction and postdeposition atomic force microscopy. After the completion of the wetting layer, transient hut clusters, faceted by different planes, are observed. When the height of these clusters exceeded a certain value, the facets developed into {305} planes. Some of these huts become {305}-faceted pyramids as the film mean thickness was increased. With further thickness increase, dome clusters developed on the expense of these pyramids. © 2005 American Institute of Physics. [DOI: 10.1063/1.1949285]

Indium Growth On Si(100)-2 X 1 By Femtosecond Pulsed Laser Deposition, M. A. Hafez, M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Indium was grown on Si (100) -2×1 at room temperature by femtosecond pulsed laser deposition. Reflection high-energy electron diffraction (RHEED) was performed in situ to study film morphology and in-plane lattice spacing. Indium was found to grow on Si (100) -2×1 by the Stranski-Krastanov mode. The initial two-dimensional In layer formed in the In-2×1 structure with a lattice constant of 3.65 Å. The full-width at half-maximum (FWHM) of the specular peak decreased during the growth, indicating an increase of the In islands size. Further In growth on the initial In-2×1 layer showed the formation of hexagonal, elongated, and hemispherical islands …

Microbubble-Based Model Analysis Of Liquid Breakdown Initiation By A Submicrosecond Pulse, J. Qian, R. P. Joshi, K. H. Schoenbach, J. Dickens, A. Neuber, M. Butcher, M. Cevallos, H. Krompholz, E. Schamiloglu, J. Gaudet

Electrical & Computer Engineering Faculty Publications

An electrical breakdown model for liquids in response to a submicrosecond(∼100ns) voltage pulse is presented, and quantitative evaluations carried out. It is proposed that breakdown is initiated by field emission at the interface of pre-existing microbubbles. Impact ionization within the microbubble gas then contributes to plasma development, with cathode injection having a delayed and secondary role. Continuous field emission at the streamer tip contributes to filament growth and propagation. This model can adequately explain almost all of the experimentally observed features, including dendritic structures and fluctuations in the prebreakdown current. Two-dimensional, time-dependent simulations have been carried out based on a …

Optimization Of Ultraviolet Emission And Chemical Species Generation From A Pulsed Dielectric Barrier Discharge At Atmospheric Pressure, Xinpei Lu, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

One of the attractive features of nonthermal atmospheric pressure plasmas is the ability to achieve enhanced gas phase chemistry without the need for elevated gas temperatures. This attractive characteristic recently led to their extensive use in applications that require low temperatures, such as material processing and biomedical applications. The agents responsible for the efficient plasma reactivity are the ultraviolet (UV) photons and the chemically reactive species. In this paper, in order to optimize the UV radiation and reactive species generation efficiency, the plasma was generated by a dielectric barrier discharge driven by unipolar submicrosecond square pulses. To keep the discharge …

Final Report For The Development Of The Nasa Technical Report Server (Ntrs), Michael L. Nelson

Computer Science Faculty Publications

The author performed a variety of research, development and consulting tasks for NASA Langley Research Center in the area of digital libraries (DLs) and supporting technologies, such as the Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH). In particular, the development focused on the NASA Technical Report Server (NTRS) and its transition from a distributed searching model to one that uses the OAI-PMH. The Open Archives Initiative (OAI) is an international consortium focused on furthering the interoperability of DLs through the use of "metadata harvesting". The OAI-PMH version of NTRS went into public production on April 28, 2003. Since that …

Lessons Learned With Arc, An Oai-Pmh Service Provider, Xiaoming Liu, Kurt Maly, Michael L. Nelson

Computer Science Faculty Publications

Web-based digital libraries have historically been built in isolation utilizing different technologies, protocols, and metadata. These differences hindered the development of digital library services that enable users to discover information from multiple libraries through a single unified interface. The Open Archives Initiative Protocol for Metadata Harvesting (OAI-PMH) is a major, international effort to address technical interoperability among distributed repositories. Arc debuted in 2000 as the first end-user OAI-PMH service provider. Since that time, Arc has grown to include nearly 7,000,000 metadata records. Arc has been deployed in a number of environments and has served as the basis for many other …

Archive Ingest And Handling Test, Michael L. Nelson, Johan Bollen, Giridhar Manepalli, Rabia Haq

Computer Science Faculty Publications

The Archive Ingest and Handling Test (AIHT) was a Library of Congress (LC) sponsored research project administered by Information Systems and Support Inc. (ISS). The project featured five participants: Old Dominion University Computer Science Department; Harvard University Library; Johns Hopkins University Library; Stanford University Library; Library of Congress. All five participants received identical disk drives containing copies of the 911.gmu.edu web site, a collection of 9/11 materials maintained by George Mason University (GMU). The purpose of the AIHT experiment was to perform archival forensics to determine the nature of the archive, ingest it, simulate at least one of the file …

Introduction: Data Communication And Topology Algorithms For Sensor Networks, Stephan Olariu, David Simplot-Ryl, Ivan Stojmenovic

Computer Science Faculty Publications

(First paragraph) We are very proud and honored to have been entrusted to be Guest Editors for this special issue. Papers were sought to comprehensively cover the algorithmic issues in the “hot” area of sensor networking. The concentration was on network layer problems, which can be divided into two groups: data communication problems and topology control problems. We wish to briefly introduce the five papers appearing in this special issue. They cover specific problems such as time division for reduced collision, fault tolerant clustering, self-stabilizing graph optimization algorithms, key pre-distribution for secure communication, and distributed storage based on spanning trees …

Energy-Efficient Self-Organization Protocols For Sensor Networks, Qingwen Xu

Computer Science Theses & Dissertations

A Wireless Sensor Network (WSN, for short) consists of a large number of very small sensor devices deployed in an area of interest for gathering and delivery information. The fundamental goal of a WSN is to produce, over an extended period of time, global information from local data obtained by individual sensors. The WSN technology will have a significant impact on a wide array of applications on the efficiency of many civilian and military applications including combat field surveillance, intrusion detection, disaster management among many others. The basic management problem in the WSN is to balance the utility of the …

Multi-Modal Enhancement Techniques For Visibility Improvement Of Digital Images, Li Tao

Electrical & Computer Engineering Theses & Dissertations

Image enhancement techniques for visibility improvement of 8-bit color digital images based on spatial domain, wavelet transform domain, and multiple image fusion approaches are investigated in this dissertation research.

In the category of spatial domain approach, two enhancement algorithms are developed to deal with problems associated with images captured from scenes with high dynamic ranges. The first technique is based on an illuminance-reflectance (I-R) model of the scene irradiance. The dynamic range compression of the input image is achieved by a nonlinear transformation of the estimated illuminance based on a windowed inverse sigmoid transfer function. A single-scale neighborhood dependent contrast …

Melting And Solidification Study Of Indium And Bismuth Nanocrystals Using Reflection High-Energy Electron Diffraction, Mohamed K. Zayed

Electrical & Computer Engineering Theses & Dissertations

As technology begins to utilize nanocrystals for many chemical, biological, medical, electrical, and optoelectrical applications, there is a growing need for an understanding of their fundamental properties. The study of melting and solidification of nanocrystals is of interest to fundamental understanding of the effect of reduced size and crystal shape on the solid-liquid phase transition. Melting and solidification of as-deposited and recrystallized indium and bismuth nanocrystals were studied using reflection high-energy electron diffraction (RHEED). The nanocrystals were thermally deposited on highly oriented 002-graphite substrate at different deposition temperatures. The growth dynamics of the nanocrystals was studied using in situ RHEED …