Engineering Commons^™

A Hybrid Course In Fundamentals Of Building Construction Using Combination Archived Video And Live Session Distance Learning, Vernon W. Lewis Jr., Carol L. Considine, June Ritchie

Engineering Technology Faculty Publications

A course in the Fundamentals of Building Construction has been a curricular requirement of the Civil Engineering Technology Program (CET) since its inception. This course was taught traditionally as an on-campus class. Over the last ten years, the CET program has expanded to contain an extensive distance learning component, with at least half of the enrollment located off campus. The model for the typical distance-learning class is to meet for three hours, once a week, with a fully interactive (voice) live class. In consideration of the demand of a growing distance learning system, it was decided to restructure this class …

A Comparison Between Frequent Out-Of-Class Assignments And Frequent In-Class Assessments Relative To Student Performance In A Sophomore Level Electrical Circuit Analysis Course, Isaac Flory, Christian Hearn

Engineering Technology Faculty Publications

Two parallel sections of a sophomore level circuit analysis course in Electrical Engineering Technology were structured to provide insight to the marginal utility of out-of-class assignments versus in-class assessments in academic performance. Student distributions for each section, the classroom model, the composition of the common tests and exam, and grading formats are discussed. The data presented and the conditions of the resulting observations indicate the model which favored out-of-class assignments led to improved test scores.

Designing A Microcontroller Training Platform For Active Distance Learning Engineering And Technology Students, Steve C. Hsiung, James E. Eiland, John R. Hackworth, John Ritz

Engineering Technology Faculty Publications

This is an active distance-learning project that addresses the hands-on microprocessor/ mi-crocontroller-related courses. A research team designed a low-cost training system with supporting instructional materials to assist the teaching of these concepts. Individual laboratory activities are being developed to reinforce student learning and skill development in programming concepts. This basic system format eventually will support an array of engineering and technology courses. This project involves two community colleges, Blue Ridge Community College (BRCC) and Olympic College (OC), and a four-year university, Old Dominion University (ODU), in a collaborative research team to design and develop a specific PIC microcontroller training system …

Using Rfid Technology In Collaborative Design Of The Assembly Systems, Stevan Stankovski, Gordana Ostojić, Vukica Jovanović, Branislav Stevanov

Engineering Technology Faculty Publications

Modern production conditions require the application of the concept of distributing production. This approach means coordinative production in a number of small and middle size companies. Multiplex products, consisting of a number of parts, components, and modules are assembled in one function unit in one company, but they may not be manufactured in one place. Huge factory and production complex, which existed in our country, comprised all phases of product lifecycle, from the development of a concept solution to the assembly. Technology of product manufacturing, resource logistics, quality control, product testing and verification of product function characteristics all represented activities …

An Assessment And Continuous Improvement Model For Engineering Technology Programs, Alok Verma, Gary Crossman

Engineering Technology Faculty Publications

Assessment and continuous improvement are essential and critical processes for higher education. Development and implementation of such processes are not only required by the Accreditation Board for Engineering and Technology (ABET) but it is also a necessary condition for the maturation and development of any engineering technology program. The assessment and continuous improvement plan discussed here was developed at Old Dominion University (ODU) and implemented during the last accreditation cycle within the Engineering Technology Department. The plan is based on two cycles of assessment and evaluation, a short cycle of one year and a long term cycle of three years. …

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

A New Approach In Microprocessor/Microcontroller Courses/Laboratories Material Design And Development, Steve C. Hsiung, Jeff Willis

Engineering Technology Faculty Publications

Courses in microprocessors and microcontrollers are standard parts of the Engineering Technology core curricula. The traditional course material developments include both lectures and associated laboratory exercises. No matter how creative is the curriculum; it is usually budgetary constraints that confine the creativity when developing new curricula. This limits the freedom of the major approach in new course development.

This article demonstrates new course lecture and laboratories material development that starts from ground up with both a hardware platform and simulation software design for microprocessor/microcontroller related courses. It is not only very cost effective, but also does not limit the instructor's …

Rfid Technology Use In Assembly And Disassembly Processes, Gordana Ostojić, Milovan Lazarević, Vukica Jovanović, Stevan Stankovski, Ilija Ćosić

Engineering Technology Faculty Publications

Modern production conditions demand the application of the concept of distributed production. Today companies are specialized for partial technology processes. Hundreds, sometimes even thousands, of collaborative processes depend on workers’ interaction and communication in product assembly and disassembly phases. RFID technologies can be really helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper we presented VCDE system architecture and the realization method of RFID technology as well as the data acquisition using RFID technology during the product lifecycle from the design process, production, assembly, usage, and an special example is given regard- …

Wavelet Analysis In Virtual Colonoscopy, Sharon Greenblum, Jiang Li, Adam Huang, Ronald M. Summers, Armando Manduca (Ed.), Amir A. Amini (Ed.)

Electrical & Computer Engineering Faculty Publications

The computed tomographic colonography (CTC) computer aided detection (CAD) program is a new method in development to detect colon polyps in virtual colonoscopy. While high sensitivity is consistently achieved, additional features are desired to increase specificity. In this paper, a wavelet analysis was applied to CTCCAD outputs in an attempt to filter out false positive detections. 52 CTCCAD detection images were obtained using a screen capture application. 26 of these images were real polyps, confirmed by optical colonoscopy and 26 were false positive detections. A discrete wavelet transform of each image was computed with the MATLAB wavelet toolbox using the …

Hybrid Committee Classifier For A Computerized Colonic Polyp Detection System, Jiang Li, Jianhua Yao, Nicholas Petrick, Ronald M. Summers, Amy K. Hara, Joseph M. Reinhardt (Ed.), Josien P.W. Pluim (Ed.)

Electrical & Computer Engineering Faculty Publications

We present a hybrid committee classifier for computer-aided detection (CAD) of colonic polyps in CT colonography (CTC). The classifier involved an ensemble of support vector machines (SVM) and neural networks (NN) for classification, a progressive search algorithm for selecting a set of features used by the SVMs and a floating search algorithm for selecting features used by the NNs. A total of 102 quantitative features were calculated for each polyp candidate found by a prototype CAD system. 3 features were selected for each of 7 SVM classifiers which were then combined to form a committee of SVMs classifier. Similarly, features …

Rf-Generated Ambient-Afterglow Plasma, Shariff Shakir, Bijan Pashaie, Shirshak K. Dhali

Electrical & Computer Engineering Faculty Publications

Atmospheric pressure plasmas have gained importance due to their potential application in polymer surface treatment, surface cleaning of metals, thin film deposition, and destruction of biological hazards. In this paper a radio-frequency driven atmospheric pressure afterglow plasma source in argon and helium is discussed. The light intensity measurement shows that the radio-frequency discharge is continuous in time unlike the intermittent nature of a low frequency dielectric-barrier discharge. The discharge, under ambient conditions, can be generated in argon, helium, and nitrogen. Spectroscopic measurements show that metastables are capable of producing oxygen atoms and other excited species. The argon afterglow, in particular, …

Growth Of Ge Quantum Dots On Si(100)-(2×1) By Pulsed Laser Deposition, M. S. Hegazy, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Self-assembled germanium quantum dots (QDs) were grown on Si(100)-(2×1) by pulsed laser deposition. In situ reflection-high energy electron diffraction (RHEED) and postdeposition atomic force microscopy are used to study the growth of the QDs. Several films of different thicknesses were grown at a substrate temperature of 400 °C using a Q-switched Nd:yttrium aluminum garnet laser (λ= 1064 nm, 40 ns pulse width, 23 J/cm ² fluence, and 10 Hz repetition rate). At low film thicknesses, hut clusters that are faceted by different planes, depending on their height, are observed after the completion of the wetting layer. With increasing film thickness, …

Dynamics Of An Atmospheric Pressure Plasma Plume Generated By Submicrosecond Voltage Pulses, Xinpei Lu, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

Nonequilibrium plasmas driven by submicrosecond high voltage pulses have been proven to produce high-energy electrons, which in turn lead to enhanced ionization and excitations. Here, we describe a device capable of launching a cold plasma plume in the surrounding air. This device, "the plasma pencil," is driven by few hundred nanosecond wide pulses at repetition rates of a few kilohertz. Correlation between current-voltage characteristics and fast photography shows that the plasma plume is in fact a small bulletlike volume of plasma traveling at unusually high velocities. A model based on photoionization is used to explain the propagation kinetics of the …

Electron Bernstein Wave Simulations And Comparison To Preliminary Nstx Emission Data, Josef Preinhaelter, Jakub Urban, Pavol Pavlo, Gary Taylor, Steffi Diem, Linda L. Vahala, George Vahala

Electrical & Computer Engineering Faculty Publications

Simulations indicate that during flattop current discharges the optimal angles for the aiming of the National Spherical Torus Experiment (NSTX) antennae are quite rugged and basically independent of time. The time development of electron Bernstein wave emission (EBWE) at particular frequencies as well as the frequency spectrum of EBWE as would be seen by the recently installed NSTX antennae are computed. The simulation of EBWE at low frequencies (e.g., 16 GHz) agrees well with the recent preliminary EBWE measurements on NSTX. At high frequencies, the sensitivity of EBWE to magnetic field variations is understood by considering the Doppler broadened electron …

Observed Web Robot Behavior On Decaying Web Subsites, Joan A. Smith, Frank Mccown, Michael L. Nelson

Computer Science Faculty Publications

We describe the observed crawling patterns of various search engines (including Google, Yahoo and MSN) as they traverse a series of web subsites whose contents decay at predetermined rates. We plot the progress of the crawlers through the subsites, and their behaviors regarding the various file types included in the web subsites. We chose decaying subsites because we were originally interested in tracking the implication of using search engine caches for digital preservation. However, some of the crawling behaviors themselves proved to be interesting and have implications on using a search engine as an interface to a digital library.

Fedcor: An Institutional Cordra Registry, Giridhar Manepalli, Henry Jerez, Michael L. Nelson

Computer Science Faculty Publications

FeDCOR (Federation of DSpace using CORDRA) is a registry-based federation system for DSpace instances. It is based on the CORDRA model. The first article in this issue of D-Lib Magazine describes the Advanced Distributed Learning-Registry (ADL-R) [1], which is the first operational CORDRA registry, and also includes an introduction to CORDRA. That introduction, or other prior knowledge of the CORDRA effort, is recommended for the best understanding of this article, which builds on that base to describe in detail the FeDCOR approach.

Processing And Characterization Of High Performance Structural Nanocomposites, Dennis C. Working

Mechanical & Aerospace Engineering Theses & Dissertations

Carbon nanotubes are considered to be a revolutionary material breakthrough due to their unique combination of properties. While many applications for SWCNTs have been projected, realization of these potential uses have been hampered by the high cost of limited supplies of high quality SWCNTs and the difficulty in the development of a suitable processing method that does not damage the filler thus diminishing the desirable properties of this material. In spite of these technical challenges, their potential to enable the fabrication of multifunctional materials is being investigated in earnest. The goal of this thesis is to investigate the feasibility of …

Assimilating Non-Probabilistic Assessments Of The Estimation Of Uncertainty Bias In Expert Judgment Elicitation Using An Evidence Based Approach In High Consequence Conceptual Designs, Colin K. S. Barrows

Engineering Management & Systems Engineering Theses & Dissertations

One of the major challenges in conceptual designs of complex systems is the identification of uncertainty embedded in the information due to lack of historic data. This becomes of increased concern especially in high-risk industries. This document reports a developed methodology that allows for the cognitive bias, estimation of uncertainty, to be elucidated to improve the quality of elicited data. It consists of a comprehensive literature review that begins by defining a 'High Consequence Conceptual Engineering Environment' and identifies the high-risk industries in which these environments are found. It proceeds with a discussion that differentiates risk and uncertainty in decision-making …

A Dyadic Composition To Foster Virtual Team Effectiveness: An Experimental Study, Gamze Karayaz

Engineering Management & Systems Engineering Theses & Dissertations

The importance of effectiveness for virtual teamwork continues to gain momentum as technology and globalization of work accelerate. The implementation of virtual teams provides one approach to enhance competitiveness, overcoming the disadvantages of space and time differences through collaborative technologies. The influence of structure to virtual team performance has not been clearly established in the literature. The purpose of this research study was to investigate the effectiveness of a dyad structured approach for virtual teams using a quasi-experimental research design.

This research investigated four questions related to the influence of structure on virtual team effectiveness related to task performance, communication …

Robustness And Control Of A Magnetically Levitated Transportation System, Grzegorz Oleszczuk

Mechanical & Aerospace Engineering Theses & Dissertations

Electromagnetic suspension of Magnetic Levitation Vehicles (Maglev) has been studied for many years as an alternative to wheel-on rail transportation systems. In this work, design and implementation of control systems for a Maglev laboratory experiment and a Maglev vehicle under development at Old Dominion University are described. Both plants are modeled and simulated with consideration of issues associated with system non-linearity, structural flexibility and electromagnetic force modeling. Discussion concerning different control strategies, namely centralized and decentralized approaches are compared and contrasted in this work. Different types of electromagnetic non-linearities are considered and described to establish a convenient method for modeling …

Automatic Speech Recognition Using Lp-Dctc/Dcs Analysis Followed By Morphological Filtering, Penny Hix

Electrical & Computer Engineering Theses & Dissertations

Front-end feature extraction techniques have long been a critical component in Automatic Speech Recognition (ASR). Nonlinear filtering techniques are becoming increasingly important in this application, and are often better than linear filters at removing noise without distorting speech features. However, design and analysis of nonlinear filters are more difficult than for linear filters. Mathematical morphology, which creates filters based on shape and size characteristics, is a design structure for nonlinear filters. These filters are limited to minimum and maximum operations that introduce a deterministic bias into filtered signals.

This work develops filtering structures based on a mathematical morphology that utilizes …

Coalition Battle Management Language (C-Bml) Study Group Final Report, Major Kevin Galvin, Mike Hieb, Andreas Tolk, Charles Turnitsa, Curtis Blais, James Montgomery

Computational Modeling & Simulation Engineering Faculty Publications

Interoperability across Modeling and Simulation (M&S) and Command and Control (C2) systems continues to be a significant problem for today's warfighters. M&S is well-established in military training, but it can be a valuable asset for planning and mission rehearsal if M&S and C2 systems were able to exchange information, plans, and orders more effectively. To better support the warfighter with M&S based capabilities, an open standards-based framework is needed that establishes operational and technical coherence between C2 and M&S systems.

Radar - A Novel Admission Control And Handoff Management Scheme For Multimedia Leo Satellite Networks, Syed Rashidali Rizvi

Computer Science Theses & Dissertations

Low Earth Orbit (LEO) satellite networks are deployed as an enhancement to terrestrial wireless networks in order to provide broadband services to users regardless of their location. In addition to global coverage, these satellite systems support communications with hand-held devices and offer low cost-per-minute access cost, making them promising platforms for Personal Communication Services (PCS). LEO satellites are expected to support multimedia traffic and to provide their users with some form of Quality of Service (QoS) guarantees. However, the limited bandwidth of the satellite channel, satellite rotation around the Earth and mobility of end-users makes QoS provisioning and mobility management …

Robust And Efficient Localization Techniques For Cellular And Wireless Sensor Networks, Haseebulla M. Khan

Computer Science Theses & Dissertations

Localization in wireless networks refers to a collection of tasks that, collectively, determines the location of a mobile user, striving to hide the effects of mobility from the user and/or application. Localization has become an important issue and has drawn considerable attention, as many applications including E-911, cargo tracking, locating patients, location-sensitive billing, etc., require knowledge of the location of user/objects. It was realized, quite a while back, that extending emergency 911-like services (E-911) to continually growing mobile population is one of the extremely important localization applications. The bulk of the proposed solutions to emergency location management in wireless environments …

Lattice Quantum Algorithm For The Schrodinger Wave Equation In 2+1 Dimensions With A Demonstration By Modeling Soliton Instabilities, Jeffrey Yepez, George Vahala, Linda L. Vahala

Electrical & Computer Engineering Faculty Publications

A lattice-based quantum algorithm is presented to model the non-linear Schrödinger-like equations in 2 + 1 dimensions. In this lattice-based model, using only 2 qubits per node, a sequence of unitary collide (qubit-qubit interaction) and stream (qubit translation) operators locally evolve a discrete field of probability amplitudes that in the long-wavelength limit accurately approximates a non-relativistic scalar wave function. The collision operator locally entangles pairs of qubits followed by a streaming operator that spreads the entanglement throughout the two dimensional lattice. The quantum algorithmic scheme employs a non-linear potential that is proportional to the moduli square of the wave function. …

Fourier Transform Analysis Of Terahertz Radiation, Chikaodira N. Okpo

Electrical & Computer Engineering Theses & Dissertations

Advances in terahertz radiation (T-rays) technology have great promise in various technological areas ranging from medical technology, imaging technology and accelerator technology. At Thomas Jefferson Laboratory, the Free Electron Laser division (FEL) produces very powerful beam of laser light by accelerating electrons in bunches along a beamline. This laser light absorbs and releases energy at various wavelengths. The new FEL upgrade led to the production of very bright terahertz (THz) radiation with an average power of 1 00watts which is about 100,000 times brighter than those produced elsewhere. These T-rays have very significant applications in the Laboratory. The most significant …

Gauss-Hermite Integration For Reliability Calculation And Sensitivity Analysis, Nilesh K. Borade

Mechanical & Aerospace Engineering Theses & Dissertations

In the real world, many applications are subjected to uncertainty. A simple illustration would be a structure like a bridge where magnitude and the speed of the loads acting on it are continuously changing. Therefore it becomes essential to study this stochastic or random nature. The thrust of this research is to develop an efficient reliability and sensitivity technique based on stochastic response surfaces (polynomial chaos expansions) constructed using Gauss-Hermite integration. The focus is on calculating the uncertainty propagation using less number of function evaluations since the stochastic response surface needs to be reconstructed at each design cycle. Using the …

Contemporary-Classical Sequential Loop Design With Parameter Uncertainty, Donghyuk Jeong

Mechanical & Aerospace Engineering Theses & Dissertations

Standard sequential loop closure design based on Evans root migration concepts is a well accepted, insightful and effective technique for meeting nominal performance objectives and traditional gain-phase stability margin requirements. Unfortunately, assessment of closed-loop variations resulting from parameter error is a post-process, implying an undesirable design-assess-redesign procedure is necessary if variations are found unacceptable. Further, the modem parameter uncertainty assessment framework is often inconsistent, both quantitatively and qualitatively, with the redesign task. Specifically, the parameter uncertainty assessment variables are not readily apparent in the sequential loop design framework, and these variables provide little guidance for the redesign strategy. Therefore, enhancing …

Validation Of Finite Element Beam Models, Pavan R. Madhineni

Mechanical & Aerospace Engineering Theses & Dissertations

Finite Element (FE) methods these days are becoming very popular to predict the responses of structures in industries, such as the aerospace and automobile industries. When there is a new design or modification of an existing design, the product must be tested to fulfill the criterion projected by the industry or external agencies before it can be launched. The product must be checked for each and every aspect, and every minute detail of each of the external forces. Hence, it becomes very important to carry out the model validation on the product.

This thesis describes validation of finite element (FE) …

Shape And Size Sensitivity Analysis Of Geometrically Nonlinear Laminated Composite Plates, Nitin R. Mane

Mechanical & Aerospace Engineering Theses & Dissertations

Since major applications of composite laminates involve large deformation, the nonlinear strain-displacement relation in the Von Karman sense has been incorporated here with the first order shear deformation to study bending analysis of composite laminated panels. The finite element model constructed here is an extension of the MIN3 element which is a displacement based element developed by Hughes and Tessler. The element avoids shear locking in the thin bending regime and achieves computational efficiency. The resultant nonlinear matrix equation is solved for analysis of composite panels by using the Newton-Raphson iterative method. Based upon the nonlinear matrix equation, the shape …