Engineering Commons^™

Physics-Informed Temperature Prediction Of Lithium-Ion Batteries Using Decomposition-Enhanced Lstm And Bilstm Models, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

Accurately forecasting the operating temperature of lithium-ion batteries (LIBs) is essential for preventing thermal runaway, extending service life, and ensuring the safe operation of electric vehicles and stationary energy-storage systems. This work introduces a unified, physics-informed, and data-driven temperature-prediction framework that integrates mathematically governed preprocessing, electrothermal decomposition, and sequential deep learning architectures. The methodology systematically applies the governing relations to convert raw temperature measurements into trend, seasonal, and residual components, thereby isolating long-term thermal accumulation, reversible entropy-driven oscillations, and irreversible resistive heating. These physically interpretable signatures serve as structured inputs to machine learning and deep learning models trained on temporally …

Machine Learning-Based Lifetime Prediction Of Lithium Batteries: A Comparative Assessment For Electric Vehicle Applications, Abdelilah Hammou, Raffaele Petrone, Demba Diallo, Boubekeur Tala-Ighil, Philippe Makany Boussiengue, Hicham Chaoui, Hamid Gualous

Electrical & Computer Engineering Faculty Publications

This paper evaluates and compares four data-driven methods (Gaussian Process Regression (GPR), echo state network (ESN), gated recurrent unit (GRU), and long short-term memory (LSTM)) for lithium-ion capacity prognostics adapted to electric vehicle conditions. This comparison aims to find the most efficient prognosis method considering two constraints: the limitation of computational power and the unavailability of on-board capacity measurement that requires full charge and discharge conditions. The machine learning models are trained using capacity values estimated under vehicle conditions. The ageing data is collected from cycling tests of two battery chemistries, Lithium Fer Phosphate (LFP) and Nickel Manganese Cobalt (NMC), …

Recent Insight And Perspective Of Marine-Inspired Biopolymers For Wound Healing Applications - A Review, Muhammad Umar Aslam Khan, Saiqa Yousaf, Abdalla Abdal-Hay, Mohd Faizal Bin Abdullah, Sahar Madani, Muhammad Shahzad Zafar, Goran M. Stojanović, Lobat Tayebi

Electrical & Computer Engineering Faculty Publications

There is an increasing necessity for advanced, sustainable, and biocompatible materials for wound healing as therapeutic and diagnostic products. Marine environments, characterized by high biodiversity, offer an underutilized source of natural resources with enormous potential for creating novel materials for dressings. This review highlights the revolutionary nature of polymeric biomaterials of marine origin, with a focus on polysaccharides, like alginate, chitosan, and carrageenan; proteins, such as collagen and gelatin. These biopolymers are outstanding in their physicochemical properties, such as biodegradability, bioactivity, and modifiable mechanical strength, which enable their use in wound-healing systems. Besides, these biomaterials may be easily chemically and …

Pin-Plane Electrical Discharge Driven By A Mosfet Dc Current Source, Myles Perry, Sidmar Holoman, Daniel Wozniak, Shirshak Kumar Dhali

Electrical & Computer Engineering Faculty Publications

The generation of atmospheric pressure nonequilibrium plasma using electrical discharges is an active area of research due to its significance in a wide spectrum of applications including medicine, combustion, and manufacturing. In our attempt to create a helium plasma jet in a pin-plane discharge with a constant current source, we observed self-pulsating behavior. We present the results of the electrical, optical, and spectroscopic measurements carried out to characterize the discharge. The duration of the discharge is a few tens of nanoseconds, and the repetition rate is in the few tens of kHz. The effect of the gap distance and gas …

Healthcare Digital Twins: A Methodological Literature Review On Integrating Iot And Ai For Personalized Medicine And Predictive Care, Sara Shahnazinia, Mahsa Tavasoli, Abdolhossein Sarrafzadeh, Ali Karimoddini

Electrical & Computer Engineering Faculty Publications

Digital Twin (DT) technology has the potential to revolutionize healthcare delivery and enhance patient outcomes through personalized and precision medicine, simulation models for operations and interventions, and drug discovery. However, successful implementation of DTs in Internet of Things (IoT) and artificial intelligence (AI) healthcare is contingent upon addressing key challenges such as privacy, ethics, and robust data security. This paper presents a methodological literature review of DT applications in healthcare, systematically analyzing the current state of research, key enabling technologies, and implementation challenges. The review summarizes DT categorization approaches (application-based, technology-based, and real-time function-based); delineates core DT components such as …

An Explainable Cs-Mitigation Triangular (Ecsmt) Framework To Secure Graph Neural Networks, Sabah Ettahri, Sergio Pallas Enguita, Chung-Hao Chen, Wen-Chao Yang

Electrical & Computer Engineering Faculty Publications

This research addresses cyber risk by defending against backdoor attacks on Graph Neural Networks (GNNs). We propose the Explainable Complex System-Mitigation Triangular (ECSMT) Framework, which integrates Robust Training, Graph Regularization, and Data Sanitization into a lightweight, hardware-efficient defense layer. To evaluate structural generalizability, we conducted empirical evaluations across three distinct benchmark domains (AIDS, MUTAG, and PROTEINS) using a Graph Isomorphism Network (GIN) backbone. Under a baseline 5% backdoor subgraph trigger injection ratio, ECSMT achieves excellent utility retention, securing a Clean Accuracy (CA) of 97.33% (±0.62%) while reducing the Attack Success Rate (ASR) from 97.00% down to 69.45% on the primary …

Application Of A Hyaluronic Acid-Based Lotions Containing Hydroxyapatite Nano-Particles Approach For Treatment Of Initial Dental Caries, Zahra Gharavi, Zahra Namazi, Fatemehsadat Pishbin, Helia Givian, Maryam Torshabi, Farhood Najafi, Parisa Amdjadi

Electrical & Computer Engineering Faculty Publications

This study evaluated the remineralization potential of a ceramic–polyelectrolyte system, based on a novel combination of hydroxyapatite nanoparticles (HAp NPs) and a hyaluronic acid (HY) matrix, for dental enamel, a tissue that remains challenging to repair in clinical dentistry. Nano-Hydroxyapatite (nanoHAp) powder was synthesized and characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), and zeta potential analysis to confirm their crystalline structure, functional groups, morphology, particle size distribution, and colloidal stability. HY-based suspensions (remineralizing lotions) containing 5, 10, and 12 wt% of the synthesized nanoHAp particles were formulated via a …

Bridging Mission And Execution: Integrating Participatory Design In Early-Phase Mission Engineering For Stakeholder Alignment And Mission Clarity, Rafi Soule

Knowledge and Creativity Expo

This research examines mission framing during the early phase of Mission Engineering. Stakeholder interpretations diverge under ambiguity. Interoperability constraints are often not surfaced early. These conditions reduce mission clarity and weaken mission-to-system mapping readiness. The study integrates a participatory design-inspired, artifact-first workflow with RAG-enabled retrieval from a closed corpus to support evidence-grounded reasoning and traceable citations.

Phase 1 uses an online survey to establish baseline patterns in practice (N = 86). Shared understanding is positively associated with mission clarity (r = 0.60, p < 0.001). Phase 2 uses a time-bounded comparative workshop with two conditions. Expert reviewers rate mission statement quality higher for the participatory design condition (mean 3.5) than the traditional condition (mean 2.8). Technical feasibility ratings are similar across conditions. Phase 3 demonstrates RAG-enabled, closed-corpus, retrieval-supported traceability using the Referencer tool. It is reported as a proof-of-concept for evidence-grounded rationale and auditability, and as a pathway …

Rapid Urbanization Reduces Genetic Diversity And Increases Genetic Differentiation Of A Lynx Spider Oxyopes Sertatus In Central Taiwan, Ying-Yuan Lo, Chi Wei, Wan-Jyun Chen, Chung-Ping Lin

Biological Sciences Faculty Publications

Urbanization is a dominant force driving destructive and irreversible changes of natural habitats in modern times. While the effects of urbanization on community composition and phenotypic responses are well-documented, its influence on genetic diversity and population structure remains understudied, particularly for invertebrates in subtropical regions. This study tested the hypothesis that urbanization reduces genetic diversity and increases population differentiation in the lynx spider Oxyopes sertatus, a common foliage-dwelling spider in Taiwan. We sampled 245 individuals from 17 sites distributed along an urban-rural gradient and quantified urbanization intensity using land-use composition at both landscape (4 km²) and local (0.25 km²) …

Iuse: A Gamified Virtual Learning Platform For Connected Vehicle Applications To Enhance Undergraduate Transportation Education, Tianyu Shen, Di Yang, Kai Sun, Hong Yang, Kun Xie, Mansoureh Jeihani

Civil & Environmental Engineering Faculty Publications

Emerging transportation technologies are rapidly reshaping transportation systems and industry practice. However, most transportation undergraduate curricula still emphasize foundational topics such as geometric design, travel demand forecasting, pavements, and soil properties, typically delivered through lecture-centric instruction. While these subjects remain essential to the discipline, they do not fully reflect the pace of technological change or provide sufficient opportunities for experiential learning with modern tools and data. This gap limits students’ exposure to CV concepts and their ability to translate theory into practice.

Focusing on a key emerging technology, connected vehicles (CVs), this paper bridges the above gap by introducing a …

Comparative Assessment Of Energy And Emission Costs For Geothermal Heat Pumps And Fossil-Fuel Heating Systems Across U.S. Climatic Zones, Md Shahin Alam, Shima Afshar, Seyed Ali Arefifar, Mohammad Haq

Electrical & Computer Engineering Faculty Publications

In response to growing concerns over global warming and energy sustainability, transitioning from fossil-fuel-based heating systems to renewable alternatives is essential. This study evaluates the economic and environmental performance of geothermal heat pumps for building heating and compares it with conventional coal-fired boilers, natural-gas boilers, and diesel furnaces. Using the heating degree-day (HDD) method, heating energy demand was analyzed for four U.S. cities—Anchorage (AK), San Francisco (CA), Salt Lake City (UT), and Las Vegas (NV)—representing diverse climatic zones. The analysis integrates thermodynamic and economic parameters, including the coefficient of performance (COP = 2–5) and annual fuel-utilization efficiency (AFUE = 80–97%), …

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

The relationships among deep learning, edge computing, artificial intelligence (AI), and the most recent advancements in digital twin (DT) technology for battery energy storage systems are discussed in this paper. The study highlights the need for improved cloud-edge coordination, AI model development, and stronger cybersecurity features by demonstrating real-world applications of digital twin technology in electric vehicles (EVs), aircraft, and grid storage. It also described DT-based structures for fault detection, real-time monitoring, and optimization through standardization and battery management system (BMS) fusion. Because DT-based solutions for distributed energy resources (DERs) offer improved energy management systems, various studies have been conducted …

Gem-Can: A Real-World Dataset Of Can-Bus Attack Scenarios On An Autonomous Vehicle For Intrusion-Detection Research, Mahsa Tavasoli, Abdolhossein Sarrafzadeh, Ali Karimoddini, Tienake Phuapaiboon, Milad Khaleghi, Daniel Tobias

Electrical & Computer Engineering Faculty Publications

This paper presents GEM-CAN, a labelled Controller Area Network (CAN) dataset captured from an autonomous GEM e6 platform under both normal operation and controlled cyber-attack conditions.

The dataset contains ∼143 K frames comprising (i) ∼ nominal autonomous operation (∼100k messages), (ii) DoS floods using arbitration ID 0 × 00000000 (∼41 K messages), and (iii) data-tampering injections that reuse legitimate IDs for brake and steering-lock (∼1.3 K messages). Each record includes timestamp, arbitration ID (11/29-bit), DLC, eight payload bytes, and a Normal/Attack label. A companion metadata file enumerates attack windows, PCAN bus-load traces, bitrate, and test conditions. Data were collected with …

Interpretable Battery Soh Prediction: A Comparative Interpretability Framework For Multi-Architecture Ml Models, Shafiyee Islam, Gon Namkoong

Electrical & Computer Engineering Faculty Publications

This work introduces a unified interpretability-efficiency framework for lithium-ion battery state of health (SOH) prediction using hybrid deep learning architectures. We comparatively analyze four hybrid models: CNN LSTM MultiHead, CNN Feature Extractor LSTM, DNN LSTM, and DNN BiLSTM to disentangle how network topology, feature composition, and computational design influence both predictive fidelity and physical interpretability. By integrating Monte Carlo Shapley (MC Shapley), background occlusion SHAP (BoSHAP), and ablation analysis, we quantify the contribution and robustness of five electrochemical feature groups: time, capacity, voltage, dQ/dV and peaks of dQ/dV from NASA battery dataset. The results reveal a consistent dominance of differential …

Generative Ai-Driven Optimization In Flexible And Reconfigurable Manufacturing Systems, Salah Hammedi, Hicham Chaoui, Lotfi Nabli

Electrical & Computer Engineering Faculty Publications

Flexible and Reconfigurable Manufacturing Systems (FRMSs) are essential for coping with variability in modern production environments; however, efficient scheduling and rapid reconfiguration remain challenging. This paper presents a hybrid optimization framework that integrates Colored Petri Net (CPN) modeling with Generative Artificial Intelligence (GenAI) to enhance scheduling performance and system adaptability. The CPN formalism ensures verifiable modeling of system dynamics, while a transformer-based generative model produces candidate scheduling and reconfiguration strategies. Simulation experiments were conducted under static, dynamic, and adaptive scenarios, including machine breakdowns and dynamic job arrivals. Performance was evaluated using makespan, mean flow time, machine utilization, and reconfiguration latency. …

Generalized Inverter Fault Detection Using Normalized Current Features And A Lightweight Bilstm Network, Mohammad Zamani Khaneghah, Mohamad Alzayed, Hicham Chaoui

Electrical & Computer Engineering Faculty Publications

Fault detection and diagnosis of three-phase inverter-fed motor drives is essential for ensuring system reliability, safety, and continuous operation in applications such as electric vehicles and industrial automation. This paper proposes a data-driven fault detection framework based on normalized current features and a lightweight bidirectional long short-term memory (BiLSTM) network which can be generalized to different motor power rating in the same controller system. A compact set of six time-domain features, consisting of the mean and root-mean-square (RMS) values of the phase currents, is extracted and normalized with respect to the average RMS value. This normalization effectively removes dependency on …

Statewide Corridor Evacuation Response And Re-Entry Behaviors In Florida During Hurricane Irma, Xin Wang, Yuan Zhu, Hong Yang, Kun Xie

Electrical & Computer Engineering Faculty Publications

Hurricane Irma stands as one of the most destructive tropical storms to make landfall in the United States, particularly impacting the State of Florida, where it prompted the largest evacuation in history with approximately 7 million residents. The profound consequences of mass evacuation underscore the critical need to understand travel behaviors during hurricane evacuation and the recovery process. This research analyzes statewide evacuation and re-entry patterns, leveraging diverse datasets, including TTMS data from main corridors and GIS data. A statewide corridor-based empirical analysis framework is constructed to characterize evacuation and re-entry response patterns using sensor-based traffic observations. The results show …

Affordable Course Content And Open Education Resources For Undergraduate Courses Teaching Fundamentals Of Wireless Communications And Networking, Dimitrie C. Popescu, Otilia Popescu

Electrical & Computer Engineering Faculty Publications

Wireless communication systems and networks along with the services they provide have become an essential component of the modern 21st century society, fueling job growth in the wireless industry and increasing the need for engineers specialized in wireless communication systems. As a consequence, over the past two decades, undergraduate courses teaching fundamentals of wireless communication systems and networks have become common in electrical and computer engineering and technology programs. At the same time, the number of textbooks dedicated to wireless systems and networks published by mainstream publishers has also grown, with availability in various formats and offerings and a significant …

Performance Assessment And Design Improvements For An Urban Coastal Detention Basin Under Intensifying Rainfall Extremes, Imiya Mudiyanselage Chathuranika, Agyare Asante, Faeghe Borhani, Xixi Wang, Mujde Erten-Unal, Dalya Ismael

Civil & Environmental Engineering Faculty Publications

Coastal urban areas are increasingly exposed to flooding driven by more frequent and intense rainfall events, rising sea levels, and expanding impervious surfaces. Norfolk, Virginia, a low-lying coastal city with aging stormwater infrastructure, faces heightened vulnerability to these hydrologic pressures. This study evaluates the hydraulic performance of an existing urban detention basin within the Edgewater–Larchmont catchment under 10-, 50-, and 100-year, 2-h design storms using the U.S. Environmental Protection Agency’s Storm Water Management Model (SWMM). Simulations were conducted for both pre- and post-development conditions to assess changes in peak discharge, storage capacity, and water level dynamics. Results show that urbanization, …

Short-Term Response Mechanisms Of Water Quantity And Quality Of Daihai Lake Under Temperature-Driven Changes, Hao Zhang, Xiaohong Shi, Xianhua Li, Junping Lu, Ruizhong Gao, Xixi Wang, Shuhao Zhang, Longmei Xie, Yu Liu

Civil & Environmental Engineering Faculty Publications

Temperature-driven mechanisms involving complex feedback and lag that affect the evolution of hydrological processes and ecological functions in cold- and arid-region lakes represent a core scientific issue in current hydrology and lake ecology research. In this study, based on month-scale temperature and environmental factor data from Daihai Lake in Inner Mongolia from January to December 2023, statistical methods (redundancy analysis, Tukey's test analysis, correlation analysis, structural equation modeling), time series analysis methods (dynamic time warping), and machine learning methods (random forest) were combined. A hierarchical and phased response framework was constructed that encompassed driver identification, path tracing, lag characterization, and …

Flood-Season Surface Water-Groundwater Interactions Across Distinct Geomorphic Units In A Yellow River Great Bend Tributary Basin, Yinlong Wang, Ruizhong Gao, Debin Jia, Xixi Wang, Tingxi Liu, Xiaomin Liu, Shiming Bai

Civil & Environmental Engineering Faculty Publications

Surface water-groundwater interactions are complex in the Great Bend region of the Yellow River. Clarifying water exchange and source differences among geomorphic units is important for understanding regional hydrological processes and improving water resources management. In this study, the Wulanmulun River Basin, a typical tributary of the Yellow River, was selected as the study area. A total of 90 water samples were collected, including 25 river water samples, 43 groundwater samples, and 22 precipitation samples. Gibbs diagrams, multivariate statistical analysis, PMF, and MixSIAR models were used to investigate the hydrochemical and isotopic characteristics, source contributions, and transformation relationships of surface …

Using A Study Journal To Support Class Engagement And The Development Of Entrepreneurial Mindset Habits, Otilia Popescu, Dimitrie C. Popescu

Engineering Technology Faculty Publications

Engineering Technology programs were historically introduced to support non-traditional students and offer college pathways for students working and having already a developing career. This is even more true in the current academic environment, with a large percentage of students enrolled in engineering technology programs being either fully or part-time employed, active or retired military, and at different stages in their lives, usually with families to care for. Often, non-traditional students attend classes online, either synchronously or even more often asynchronously, due to their schedule constraints. Course instructors regularly face schedule or time management constraints from the students’ side, and they …

Towards Supporting Real-Time Estimation Of Vehicle Fuel Consumption And Co2 Emissions In Smart City Applications, Abrar Alali, Stephan Olariu

Computer Science Faculty Publications

This paper evaluates a simplified physics-based energy demand model designed to estimate vehicle fuel consumption and CO₂ emissions—a critical tool for sustainable transportation planning and smart city applications. Unlike data-driven regression models that lack generalizability for user-defined conditions or complex physics-based approaches that rely on extensive, often proprietary data, the simplified model is distinguished by its minimal parameter requirements, depending primarily on a single, overarching powertrain efficiency value. A key contribution is the comprehensive empirical evaluation of the simplified model against official Environmental Protection Agency (EPA) test data across multiple driving cycles and vehicle types, providing a rigorous validation previously …

Privacy-Preserving Federated Learning With Optimized Ensemble Weighting And Knowledge Distillation For Covid-19 Detection From Non-Iid Medical Imaging Data, Richard Annan, Hong Qin, Robert Newman, Madhuri Siddula, Letu Qingge

Computer Science Faculty Publications

Medical imaging enables rapid and accurate diagnosis of COVID-19, with CT scans proving especially effective. However, data privacy concerns limit collaborative model development across hospitals. To address this issue, we introduce a novel federated learning framework. It is referred to as Independent Knowledge Distillation with post-Ensemble Federated Learning (IKDEFL). Differential Privacy (DP) is integrated into the framework to improve privacy guarantees. Three DP mechanisms are evaluated. These include Fixed Gaussian, Gaussian Adaptive, and Tree Adaptive. The evaluation has been conducted on heterogeneous and Non-Independent and Identically Distributed (Non-IID) datasets. These datasets reflect real-world hospital scenarios. Results show that IKDEFL significantly …

Biosecure-Llm Framework: Protecting Llms From Cyberbiosecurity Threats And The Case For Independent Ai Safety Governance, Xavier-Lewis Palmer, Lucas Potter, Srdjan Lesaja, Sotirios Karathanasis, Mohammad Ghasemigol

Computer Science Faculty Publications

Large Language Models (LLMs) are becoming critical infrastructure in scientific, healthcare, and governmental contexts. As frontier AI laboratories increasingly partner with government agencies, a fundamental question arises: Who should control the safety and policy-enforcement layers that constrain model behavior? Current safety mechanisms (LLM guardrails) are typically designed for generic "harmlessness" and operate by detecting semantic patterns and refusing requests. However, they are inadequate governance instruments because they cannot implement auditable, domain-specific controls tied to external regulatory policy objects (e.g., control lists or rules governing personally identifying information). Even a perfectly aligned model is not able to express institution-specific policy without …

A Comparative Analysis Of Explainable Ai (Xai) Techniques For Transparent And Reliable Image Classification, Sovon Chakraborty, Shakib Mahmud Dipto, Kevin R. Pilkiewicz, Michael L. Mayo, Pratip Rana

Computer Science Faculty Publications

Evaluating the trustworthiness of black-box machine learning models remains a significant methodological challenge. Their lack of transparency and interpretability limits applicability, because stakeholders often seek transparency before trusting the results of black-box machine learning models. Explainable AI (XAI) methods provide for human-understandable justifications and informed decision-making of these black-box architectures. Therefore, it is imperative to select the proper XAI model tailored to specific tasks. In this research, we focus on examining four XAI techniques: PEEK, LRP, GRAD-CAM, and LIME to understand how they perform against each other for image classification tasks. We evaluate the performance, robustness, generalizability, noise stability, and …

Isotropic Shrinkage Of Patterned Vacancies Enables Three-Dimensional Nanoprecise Metastructures For Visible Light Applications, Quansan Yang, Gaojie Yang, Takahiro Nambara, Hiroyuki Kusaka, Yuichiro Kunai, Alex C. Matlock, Corban Swain, Brett Pryor, Yannick Salamin, Daniel Oran, Hasindu Kariyawasam, Ramith Hettiarachchi, Dushan Wadduwage, Marin Soljačić, Peter T. C. Soflaei, Edward S. Boyden

Computer Science Faculty Publications

Three-dimensional metastructures with nanoscale feature sizes exhibit unique properties compared with structures with larger feature sizes, but are difficult to fabricate. Here we introduce implosion carving (ImpCarv), a method for photopatterning vacancies of complex geometry throughout materials, followed by isotropic shrinkage (>10-fold). ImpCarv works by photoactivating sensitizers to generate reactive oxygen species that cleave a swollen hydrogel at defined points, followed by controlled shrinkage via dehydration. ImpCarv creates three-dimensional metastructures where the refractive index of each point throughout a material can be specified with nanoscale precision via material presence or absence. By leveraging refractive index programmability for precise phase …

Memebuddy: Dialog-Style Audio Representations For Engaging Non-Visual Meme Experiences, Chirag Bhansali, Vikas Ashok, Hae-Na Lee

Computer Science Faculty Publications

Image memes are a pervasive form of online communication, widely used to convey humor, opinions, and cultural references. Prior work has explored making memes accessible to blind users, primarily through auto-generated descriptive captions. While these approaches improve comprehensibility and sometimes incorporate prosodic or emotional cues, they often fail to capture the humor, narrative structure, and contextual nuances that make memes engaging. We present MemeBuddy, a system that models memes as dialog, generating structured, multi-turn audio representations using role-based speakers. MemeBuddy reinterprets a meme as a conversation between two speakers, integrating extracted meme text with contextual knowledge implicitly inferred by a …

Susceptibility To High-Fidelity Misinformation: An Eye-Tracking Analysis, Yasasi Abeysinghe, Gavindya Jayawardena, Enkelejda Kasneci, Sampath Jayarathna

Computer Science Faculty Publications

With the rise of online misinformation and AI-generated text, understanding human perception of news truthfulness is critical. In this study, we examine visual attention and cognitive processing using eye-tracking measures as individuals read fake and real news articles sharing nearly identical structure and imagery, differing only in subtle textual changes. Using the public FakeNewsPerception dataset, we analyze advanced gaze measures, including scanpaths, AOI transitions, and luminance-corrected pupil measures, beyond basic gaze features, in relation to news truthfulness and perceived believability. Results show that, given the high fidelity of the fake news, readers exhibited comparable visual scanning patterns, attention allocation across …

Distributed Semi-Speculative Parallel Anisotropic Mesh Adaptation, Kevin Garner, Polykarpos Thomadakis, Nikos Chrisochoides

Computer Science Faculty Publications

This paper presents a distributed memory method for anisotropic mesh adaptation that is designed to avoid the use of collective communication and global synchronization techniques. In the presented method, meshing functionality is separated from performance aspects by utilizing a separate entity for each - a multicore cc-NUMA-based (shared memory) mesh generation software and a parallel runtime system that is designed to help applications leverage the concurrency offered by emerging high-performance computing (HPC) architectures. First, an initial mesh is decomposed and its interface elements (subdomain boundaries) are adapted on a single multicore node (shared memory). Subdomains are then distributed among the …