Engineering Commons^™

The Fast Fourier Transform In Assembly Languages Of Microprocessor 68000 And Microcontroller 8052, Hari Kumar Baldawa

Theses

In this report, the 256 point radix-2 FFT algorithm is written in assembly languages of microprocessor 68000( or 68008) and microcontroller 8052( or 8051). The data used can be upto 30 bits, of which the least significant 12 bits are assigned for fractional part.

The FFT code in assembly of 68000 is written for Sinclair's QL-100 personal computer with 68008 CPU. The SuperBASIC programs are used to access and test the performance of FFT code. The average time of execution falls between 0.3 to 0.4 seconds for 256 discrete points.

Again, same FFT algorithm is written in assembly language of …

Liquid Crystal Display And Thermal Printer For A Single Board Computer, Shenq Jyi Wang

Theses

This thesis deals with the installation of a LTP451 printer mechanism (LTP) and a Dot Matrix Liquid Crystal Display module (LCD) in a SINGLE BOARD COMPUTER (SBC). The communicative method between SBC and LTP is serial, but that between LCD and SBC is parallel.

The Evaluation Of The Ti-Speech System On Pc Computer, Ying Wu

Theses

A PC-TI-SPEECH system has been set up by the author of this thesis on the IBM PC/AT compatible computer. The basic functions of the system are as follows: data acquisition, internal signal synthesization, signal processing and speech recognition. The system is built up by a PC, TI-Speech Hardware kit, MADCAP software package,TI-Speech Tool kit. This thesis covers the setup, evaluation and operations of the complete PC-TI-SPEECH system, development of the system for further applications, and operations of running some evaluation programs generated by doing this thesis.

Maine Woodburning Guide, Office Of Energy Resources

Maine Collection

Maine Woodburning Guide

State of Maine, Office of Energy Resources,

Augusta, Maine, 1988.

Contents: 1 Safe Installation / 2 Buying Firewood / 3 Efficient Woodburning / 4 New Equipment Developments / 5 Chimney and Stovepipe Cleaning

Architectural Considerations For Photonic Switching Networks, Harvard S. Hinton

Electrical and Computer Engineering Faculty Publications

Photonic technologies are reviewed that could become important components of future telecommunication systems. Photonic devices and systems are divided into two classes according to the function they perform. The first class, relational, refers to devices, that map the input channels to the output channels under external control. The second class, logic, perform some type or combination of Boolean logic functions. Some of the strengths and weaknesses of operating in the photonic domain are presented. Relational devices and their applications are discussed. Optical logic devices and their potential applications are reviewed.

Applications Of Lattice Filters To Quadrature Mirror Filter Banks, Gregory R. Jaspers

Retrospective Theses and Dissertations

Presented is a method for designing and implementing lattice filters to be used in Quadrature Mirror Filter (QMF) Banks. Quadrature Mirror Filter Banks find use in applications where a signal must be spilt into subbands operated on then reconstructed in the output. Because of their structure, lattice filters do this very well and allow perfect reconstruction, even when the lattice coefficients must be quantized. In this paper QMF's and Lattice Filters are derived and analyzed. Application of the lattice filter is presented along with a design program and example of its use to implement a QMF. The computer aided design …

An Ada Simulator For The Structured Functional Simulation Of A Digital Signal Processing System, Christopher Paul Roney

Retrospective Theses and Dissertations

A behavioral-level simulator designed for FIRST, a silicon compilation system for digital signal processing, is implemented in the Ada* programming language. The simulator accepts as input a digital signal processing system description written for the FIRST ([ast Implementation of aealtime ~ignal transforms) silicon compiler, and provides an interactive post-processing signal trace facility. The simulator is a time-driven simulator which contains a FIRST description language parser, a subset of the FIRST primitives, and the capacity for maintaining a full history of all signals in the system. The primitives in the FIRST description language are common to digital signal processing systems (e.g., …

Linear State Variable Dynamic Model And Estimator Design For Allison 1406 Gas Turbine Engine, Vittal S. Rao, D. Moellenhoff, J. A. Jaeger

Electrical and Computer Engineering Faculty Research & Creative Works

This paper describes a procedure for developing a State Variable Model for the Allison T406 gas turbine engine. This linear model is useful for designing controllers using modern control techniques. The engine and V-22 rotor system is modeled around an operating point by using four state variables and one input variable. For a given power setting, it is observed that two linear models are sufficient to represent the engine dynamics over the entire flight envelope. A relationship between surge margin and the state variables is also developed. It is demonstrated that these linear models are useful in designing an estimator …

A Bulk Optically Controlled Semiconductor Switch, Rudolf K.F. Germer, Karl H. Schoenbach, Stephen G.E. Pronko

Bioelectrics Publications

Turn‐on and turn‐off of bulk semiconductor switches, based on excitation and quenching of photoconductivity, respectively, have been demonstrated with copper‐doped II‐VI semiconductor crystals. The increase of the conductivity (turn‐on) was realized with a xenon flash‐lamp pulse of 15‐μs duration. A reduction of the conductivity (turn‐off) was obtained by irradiating the samples with IR light using an 8‐ns Nd:YAG laser pulse (YAG denotes yttrium aluminum garnet). For turn‐on in CdS:Cu the conductivity follows the xenon flash excitation. The turn‐off time constant was 250 ns. ZnS and ZnSe crystals showed a slower response. A memory effect for the IR light was observed.

Laser Induced Darkening Semiconductor Dope Glasses, Jayant Malhotra

Retrospective Theses and Dissertations

No abstract provided.

A New Method For Broadband Surface Acoustic Wave Diffraction Analysis, Jacqueline Hanvey Hines

Retrospective Theses and Dissertations

This thesis describes an innovative technique for determining the impulse response of a SAW device including the effects of diffraction on both isotropic and anisotropic substrates. The approach presented is unique in that it determines the point-to-point impulse response for the isotropic case using the two-dimensional wave equation, and utilizes a double integral reduction technique to determine the tap-to-tap response, thereby significantly reducing the complexity of the calculations involved. An extension is then made to describe the impulse response of two cascaded transducers of arbitrary geometry, along with some simplifying cases. Previous attempts to model diffraction effects generally utilized either …

Optical Interferometric Formation Of Phased Array Antenna Footprint/, John E. Sherwood

Retrospective Theses and Dissertations

A 40 dB gain RF Low Noise Amplifier (LNA) matched to a photodiode input is designed using TOUCHSTONE (S-parameter based CAD software), built, and tested. The RF LNA formed the detector of a Mach-Zehnder interferometer constructed with single mode fiber, coupler, Gradient Index Rod Acousto-optic modulator (ADM) . (GRINROD) lenses, and an The ADM is used to frequency shift the optical frequency by 125 MHz, and the motion of a GRINROD lens is used to produce an optical phase shift that is recovered at the detector as an electrical phase shift by using heterodyne detection . Finite Hankel transforms are …

Simulation Of Photovoltaic Power Systems And Their Performance Prediction, S. Rahman, Badrul H. Chowdhury

Electrical and Computer Engineering Faculty Research & Creative Works

A number of photovoltaic (PV) performance-analysis models are tested for their ability to estimate the AC power output and validated against historical observations from a PV test facility. A method to estimate meteorological parameters is developed for use in PV performance models for predicting future AC power output from a PV test site. Twelve such PV performance models are examined, and the PVFORM system analysis program and lifetime cost and performance models are extensively tested. These two models are tested using the typical meteorological year and the VPI model-generated estimates of long-term data. Performance prediction results are compared against actual …

A Discussion On The Diversity In The Applications Of Photovoltaic Systems, S. Rahman, Badrul H. Chowdhury, M. A. Khallat

Electrical and Computer Engineering Faculty Research & Creative Works

References on the diverse applications of photovoltaic (PV) systems around the world are classified. The classes presented are (i) stand-alone, (ii) grid-connected, (iii) PV-thermal, (iv) PV-wind, and (v) dedicated applications. 73 papers are cited and classified into these five categories including a brief summary of each paper. Out of these, 42 papers relate to grid-connected applications in many industrialized countries of the world. These papers reflect the importance given to such applications. Due to the rapidly changing nature of PV and related industries, only papers published during the last ten years are considered.

Distribution Automation For The Association Of Missouri Electric Cooperatives—A Statewide Evaluation Of Load Management, Jack F. Morris, Frank J. Kern

Electrical and Computer Engineering Faculty Research & Creative Works

Presented is an in-depth technical and economic feasibility study utilizing one- and two-way management systems for statewide load control and distribution automation. Included are 1) an evaluation of the generation and transmission load patterns of the state cooperatives and the determination of the amount of controllable load for use by a load management system, 2) an in-depth economic cost-benefit study as a result of implementing a load management system on a statewide basis, 3) communication alternatives for implementing the statewide load management and distribution automation system, 4) an investigation into using an existing statewide microwave communications system for direct load …

Simulation Of Communication Systems Using Personal Computers, William H. Tranter, Carl R. Ryan

Electrical and Computer Engineering Faculty Research & Creative Works

Microcomputer simulation provides a powerful tool for computer-aided design and analysis of communication systems and requires a minimum of investment. Two different simulation examples are presented: a fixed topology simulation program for digital data links written in Pascal; and a simulation of an analog link using Fortran. These examples are followed by a consideration of the new 32-bit single-board computers and their potential impact on microcomputer simulation. © 1988 IEEE

Implementation Of Dsp Applications Using The At&T Dsp32 C Compiler And Application Library, J. Tow, J. Hartung, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

The authors briefly introduce the C compiler and the application library for the DSP32 digital signal processor (DSP). Several examples are shown that illustrate the ease of writing C programs for some common filtering applications. In most cases, a small real-time penalty is incurred by using C, rather than assembly language coding. Programming in C, however, allows a dramatic improvement in programmer productivity in terms of implementing, testing, and maintaining an application

New Directions In Subband Coding, Y. Shoham, Steven L. Grant, N. Seshadri, R. V. Cox, S. R. Quackenbush, N. S. Jayant

Electrical and Computer Engineering Faculty Research & Creative Works

Two very different subband coders are described. The first is a modified dynamic bit-allocation-subband coder (D-SBC) designed for variable rate coding situations and easily adaptable to noisy channel environments. It can operate at rates as low as 12 kb/s and still give good quality speech. The second coder is a 16-kb/s waveform coder, based on a combination of subband coding and vector quantization (VQ-SBC). The key feature of this coder is its short coding delay, which makes it suitable for real-time communication networks. The speech quality of both coders has been enhanced by adaptive postfiltering. The coders have been implemented …

Rise Time To Frequency Correlation Of Crosstalk In Coupled Microstrip Lines, Charles Michael Fletcher Jr.

Retrospective Theses and Dissertations

An examination of forward crosstalk in microstrip transmission lines is presented through a computer simulation using SPICE. A non-resistive lumped L-C transmission line model is modified to include capacitive and inductive coupling from adjacent lines. Two adjacent microstrip transmission lines are modeled, and simulation results in both the time and frequency domains are shown. The time domain or transient analysis looks at the effect of rise times on crosstalk. Rise times in the range of 100 to 1000 nanoseconds (ns) are considered. The frequency analysis shows the crosstalk frequency response over the range of 100 to 1600 kilohertz (kHz). The …

A System For Measuring The Phase Difference Between Two Points Of A Propagating Laser Beam, Jefferson E. Odhner

Retrospective Theses and Dissertations

An optical system has been designed, analyzed, implemented, and calibrated which measures the phase difference between two points of a propagating laser beam. The system is a quadrature interferometer whose detector outputs are processed by a computer. This quadrature interferometer measures both the phase and amplitude variations between two points of a laser beam after the beam passes through turbulence . These measurements are in turn processed by a computer to isolate the phase variations from the amplitude variations. Further statistical analysis which can be performed on these phase variations should provide an understanding of the phase fluctuations of propagating …

Method For Sizing Mos Transistors For Vlsi, Matthew J. Amatangelo

Retrospective Theses and Dissertations

Determining the device width to length ratios has typically been an iterative process for the custom IC digital design engineer. After the logic design phase is complete for a particular circuit, the designer would make an educated guess at the device sizes. Then by trial and error, using SPICE or another circuit simulator, suitable sizes would be determined. Unfortunately, this approach is time consuming and the resulting sizes are often a good bit larger than they need to be to maintain a certain speed because of the lack of a rigorous sizing methodology. This paper describes a method for reducing …

Optimizing Transformer Impedance For Short Circuit Analysis, Louis Scott Becker

Masters Theses

"Transformer impedances change when the tap positions on the primary or secondary are changed. Models were designed that gave the maximum impedance variation for a large percentage of transformers studied. These models were used to study how fault currents deviated from the predicted values if the actual transformer impedance was not the same as the predicted impedance. The effects of the change in turns ratio was also taken into account, and the base voltages were chosen to be different from the transformer voltages to include this possible error.

Faults were placed on the secondary of a model radial power system, …

A Three-Dimensional Bistatic Radar Target Position Measurement Error Model, Robert Kenneth Lynn

Masters Theses

"The accuracy of target position measurements for an airborne bistatic radar receiver are calculated. Two methods of information measurement are utilized, both of which assume cooperative synchronization between the transmitter and receiver. Gimbal angle errors are incorporated into both methods. The size and orientation of the error ellipsoid about the true target position is found. Loci of constant circular error probable are plotted in a horizontal plane of interest"--Abstract, page ii.

Is Central Station Photovoltaic Power Dispatchable?, Badrul H. Chowdhury, S. Rahman

Electrical and Computer Engineering Faculty Research & Creative Works

An operational tool for integrating a photovoltaic system into the utility's generation mix is introduced. The development and implementation of a new approach-a dynamic rule-based (RB) dispatch algorithm-is presented. A Box-Jenkins time-series method is used to model the subhourly solar irradiance. The model is extended to yield forecast parameters which are then used to predict the photovoltaic output expected to occur at certain lead times coinciding with the economic dispatch intervals. The RB dispatch algorithm is introduced to operate as either a substitute for or an aid to the dispatch operator. It is concluded that results depend on the time …

Still-Frame Image Transmission Using Dpcm/Interpolative Coding, Brindala Mallappa, Norman R. Cox

Electrical and Computer Engineering Faculty Research & Creative Works

Two methods of combining DPCM (differential pulse-code modulation) and interpolation are proposed for compressing still-frame teleconferencing signals. The first method uses horizontal subsampling, DPCM, and interpolation to achieve a 4:1 compression. The other method is similar but uses vertical subsampling instead. Simulation results indicate that either method can easily achieve the required 2-b/pel data rate with negligible degradation in image quality. Conventional DPCM is shown to perform slightly better in quantitative terms when fixed-wordlength coding is used. However, the two DPCM/interpolation methods offer other advantages when used with a variable-wordlength coder

A Rule-Based Dynamic Economic Dispatch For Power Systems, Badrul H. Chowdhury

Electrical and Computer Engineering Faculty Research & Creative Works

The author introduces a novel operation tool for economic dispatch. It deals with the development and implementation of a new approach-a dynamic rule-based dispatch algorithm that takes into account the major problems faced by the dispatch operator during a dispatch interval and channels those into a database for use by a rule-based system. The algorithm is very fast and can be used effectively in interconnected systems. It can also handle renewable technologies and is therefore considered useful for major electric power utilities contemplating adding a significant amount of these new generation sources to their existing mix

A Practical C Language Compiler/Optimizer For Real-Time Implementations On A Family Of Floating Point Dsps, J. Hartung, Steven L. Grant, S. G. Haigh

Electrical and Computer Engineering Faculty Research & Creative Works

Digital signal processors (DSPs) have traditionally been used in real-time applications with very high data throughput. For this reason, system designers have been reluctant to accept the degradation in performance inherent in machine code compiled from high-level languages such as C. The problem is compounded by the fact that DSPs use pipelined architectures to achieve their high data throughput, resulting in hazards and latencies between instructions. Simple compiler implementation cannot take advantage of latent instructions, resulting in a conservative and inefficient executable program. This problem has been addressed in the C compiler package for the AT&T WE DSP32 by the …

Analysis Of Interrelationships Between Photovoltaic Power And Battery Storage For Electric Utility Load Management, Badrul H. Chowdhury, S. Rahman

Electrical and Computer Engineering Faculty Research & Creative Works

The impact of photovoltaic power generation on an electric utility's load shape under supply-side peak load management conditions is explored. Results show that some utilities utilizing battery storage for peak load shaving might benefit from use of photovoltaic (PV) power, the extent of its usefulness being dependent on the specific load shapes as well as the photovoltaic array orientations. Typical utility load shapes both in the eastern (at Rayleigh, NC) and in the western (at Hesperia, CA) parts of the USA are examined for this purpose. It is concluded that while photovoltaic power generation seems to present a bigger impact …

A Simple Solid-Phase Electrophoretic Procedure For The Separation Of Plasmid Dna, Linda Ann Simurra

Biological Sciences Theses & Dissertations

A method was developed for extraction of plasmid DNA from bacterial cells embedded in agarose blocks. Cell - containing blocks were treated with various lysing reagents and inserted into the wells of an agarose gel. Upon electrophoresis the plasmid DNA migrated out of the embedding block and into the gel leaving intact chromosomal DNA in the well. This method was tested with various organisms and found to be effective for plasmid isolation. In comparison to "traditional" procedures, this new method is less tedious since chemical separation of plasmids is not required prior to electrophoresis. Also, a higher yield of plasmid …

Aircraft Vertical Profile Implementation Using Directed-Graph Methods, L. T. Brewster, Paul D. Stigall

Electrical and Computer Engineering Faculty Research & Creative Works

Aircraft Vertical Profile Simulation is Realized using a Demand-Driven Minimal-Calculation Directed Graph Structure to Reduce Calculation Time and to Force Synchronization of the Performance Measurement Functions with the System State Variables. Performance-Directed Model Adaptation Makes Dynamic Vertical Profile Path Corrections, in the Presence of Fixed Drag Variations, Possible. Drag Variations Ranging from + 10 Percent to - 10 Percent Yielded Fuel Consumption Improvements of Less Than 1 Percent in the Majority of the Cases. Calculation Time Improvement for Path Simulation Ranges from a Factor of 1.19 in the Worst Case to 1.5 in the Best Case. © 1988 IEEE